PROVN OF THERMAL RESISTANT PAINT ON ROOFTOP OF CERTAIN BLDG, ADDN/ALTN TO PATIENT WARD TOILET AND PROVISION OF RAIN PROTECTIVE SHELTER NEAR BLDG NO P-151 AT VSN CHILODA UNDER GE (AF) CHILODA

Amount

M&L for heat reduction of terrace with reinforced elastomeric heat reducing liquid membrane of 400 micron thickness in four layers (100 micron each layer) having SRI of 130, tested as per ASTM E 1980(with solar reflectance and thermalemittance tested as perASTM C 1549 and ASTM C 1371 respectively). The coating should have water absorption less than 1 % as per IS 101(P-7/Sec-1) 1989,with the ability to resist heat upto 125 degree C as per IS 101(P-7/Sec-3) 1990 having Voc less than 1.00 g/ltr as per ASTM D 3960 and should have excellent resistance to ammonia solution,sodium nitrate,sodium hydroxide alongwith water and soap solution as per IS:101(P-7/Sec-2)1990. The heat reducing membrane will be laminated with 25-40 micron thick transparent nano modified composite cross linking polymeric coating with a minimum of 40 % solid content as per IS 101(P-8/Sec 6)1993 and also should pass impact test as per IS101 (P-5/Sec-3) 1988 alongwith having dust and water repellent & anti graffitti property passing. Scratch hardness test of 500 gas per IS101 (P-5/Sec-2) 1988. It should also pass cross cut adhesion test as per IS 101(P-5/Sec-2)1988. Thepolymeric coating should have a self cleaning and easy to clean property with excellent weather stability and DPR (Dirt pickup ratio). Surface preparation includes washing cleaning to remove all dust,fungus,etc. The coating thickness and the methodology of application shall strictly be carried out by the authorised applicator vendor/manufacturer with all specifications and as approved & as directed by GE. The manufacturer/autorised applicator shall give a warranty for the performance & durability for 5 years.

Taking down chowkats or frame with shutters(without taking off shutters from the frame not exceeding 1.50 sqm each & removing to store complete all as specified and directed by Engineer-in-Charge.

S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet reinforced with MS square tube & edges will be painted to match with printed sheet complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with but 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

S & F flush shutter 35mm thick solid core construction with block board core and plywood face panels commercial type on both sides with lipping / frame to match complete all as specified and directed by Engineer - in - Charge.

S&F Aluminium handle cast type anodized 150 mm long complete all as specified and directed.

S&F Aluminium anodized barrel tower bolt of extended section and fixed 150 mm long complete all as specified and directed.

S&F 100 mm long butt hinges extruded almiunium alloy with galvanised mild steel hinges pin, anodised and fixed complete all as specified and directed.

S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

M&L preparing surface of wood and wood based surface new on any description not other wise described over 10cm with or grith and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engineer - in - Charge.

Demolition of brick work built in cement mortar or cement lime mortar complete all as specified and as directed.

M&L for old size brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and as directed.

M&L for old size brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls,built in cement mortar 1:6 complete all as specified and directed.

S & F in repairs aluminium power coated (min thickness of powder coating 50 micron of approved colour ) ventilator ,partially glazed and partially louvers ,outer frame and mullion fabricated with aluminium section of size 82.50mm X 38 mm x 1.70mm thick (Cat No. 20036 Jindal or equivalent) half portion glazed with 4mm thick froasted glass including rubber bedding and glazing clip half portion louvers of 80mm wide and 4mm thick froasted glass including aluminium louver patti including SS wire gauge for fixing of 0.36mm dia and 1.40mm width aperture with 25x3mm thick aluminium strip with screw to upper half portion of ventilator all fitting and fixture and fixed in position complete all as specified and directed.

Taking down cement or cement lime plaster from brick walls etc including raking out joints, hacking for key scrubbing down with water etc. complete all as specified and directed.

M & L 10mm thick rendering in Cement Mortar 1:3 on fair faces of brick work or concrete surfaces of ceiling finished even and smooth without using extra cement complete all as specified and directed by Engineer - in - Charge .

M & L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even & smooth without using extra cement all as specified and directed by Engineer - in - Charge.

M & L applying three coat of white wash on newly plastered or unplastered ceiling surfaces including preperation of surfaces, complete all as specified.

M & L for complete removal of existing treatment and applying two coats of white wash on old decorated plastered or unplastered surfaces of ceiling including preparation of surfaces complete all as specified and directed by Engineer - in - Charge .

M & L applying three coat of white wash on newly plastered or unplastered wall surface including preparation of surfaces complete all as specified and directed.

M & L for complete removal of existing treatment and applying two coats of white wash on old decorated plastered or unplastered surfaces of walls including preparation of surfaces complete all as specified and directed by Engineer - in - Charge .

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Material and labour for Glazed ceramic coloured tiles of size 600mmx 300mm, 7mm thick, as in vertical surface set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 10 mm thick bedding layer (rendering) in cement mortar (1:4) and finish the surface rough to receive the tile complete all as specified and as directed .

Material and labour for Non Skid ceramic coloured tiles 7 to 8 mm thick square or rectangular area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 15 mm thick bedding layer (screed bed) in cement mortar (1:6) and finish the surface rough to receive the tile complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L RCC (nominal mix) 1:2:4 type B1 using 20 mm graded aggregate as in foundation, including rafts, footings, foundation beams, plinth beams, bases for columns, etc; basement slabs, under reamed piles and mass concrete complete all as specified and directed.

M&L RCC type B 1, 1:2:4 (20mm graded agg) as in beams, cantilevers, lintels, over 1.5 m span complete all as specified and directed.

S&F TMT bars 10mm dia and over, cut to length, bent to shape required,including binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

S&F TMT bars 5mm and over upto and including 10mm dia in stirrups, spacers and binders bent to shape required,including binding with mild steel wire (annealed) not less than .9mm dia complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L 25 mm thick cement concrete type B-1, 1:2:4 using 20mm graded stone aggregate as in floors levelling for tiles complete all as specified and directed.

M&L for 75 mm thick plain cement concrete (1:2:4) type B-2 (40mm graded aggregate) in flooring and similar works complete all as specified and directed.

M&L for PCC (1:4:8) type D-2 (40mm graded aggregate) in foundation, filling and mass concrete complete all as specified and directed.

M&L for 75 mm thick PCC ( 1:3:6) type C-2, (20mm graded aggregate) as in plinth protection including joint filling etc complete all as specified and directed.

S & F framed work such as grills, cooler stand ,grating, etc., with ends of bars shouldered` and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290.Gde-E-165 complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new steel surfaces of any description over 10cm in width or girth not otherwise described and applying 2 coats of Synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed by Engr-in-Charge.

Taking up or down steel tubing of 15 mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.

Taking up or down steel tubing of 20 mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.

S&F Chlorinated PVC (CPVC) pipes 20 mm outer dia, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.0 m spacing . this includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete all as specified and directed.

S&F Chlorinated PVC (CPVC) pipes 40 mm outer dia, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.0 m spacing . this includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete all as specified and directed.

Dismantling of CI pips or reinforced concrete pipes 100 mm dia fixed to wall etc complete all as specified and directed.

Dismantling of CI pips or reinforced concrete pipes 75 mm dia fixed to wall etc complete all as specified and directed.

S&F 110mm PVC (SWR) pipes single socketed(pressure rating not less than 4kg/sqcm) in any length with rubber ring joints laid in trenches or in floors / walls fixed with and including PVC clamps, complete all as specified and directed.

S&F 75mm PVC (SWR) pipes single socketed(pressure rating not less than 4kg/sqcm) in any length with rubber ring joints laid in trenches or in floors / walls fixed with and including PVC clamps, complete all as specified and directed.

Supply & fixing PVC (SWR) bends (any radius) suitable for 110mm bore pipe complete all as specified and directed.

Supply & fixing PVC (SWR) bends (any radius) suitable for 75mm bore pipe complete all as specified and directed.

Supply & fixing PVC (SWR) floor trap, plain with grating, suitable for 100/75mm bore pipe including jointing with solvent cement complete all as specified and directed.

Supply and fixing PVC (SWR) reducer 110/75 complete all as specified and directed.

Supply & fixing PVC (SWR) vent cowl suitable for 75mm bore PVC pipe complete all as specified and directed.

Supply & fixing PVC (SWR) of size 110 mm sanitary connection socket to fit out let of WC complete all as specified and directed.

Supply & fixing 110mm bore PVC (SWR) junction single (single T) equal or unequal fixed with solvent cement, with access door complete all as specified and directed.

Supply & fixing 75mm bore PVC (SWR) junction single (single T) equal or unequal fixed with solvent cement, with access door complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan padestel pattern white including connection pipe to union of flushing cistern, inlet and overflow pipes,connecting only to flushing cistern anti-syphonage pipe with PVC flush pipe of 32mm dia including plastic seat cover with mild steel chromoum plated hinging and 'P' or 'S' trap device complete all as specified and directed by Engineer-in-Charge.

S&F in repair Viterous China squating pan Orrisa pattern size 580/440mm wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed.

S & F in repairs PVC 10 ltrs syphonic action type flushing cistern, low level with inlet, ball valve, float and handle including brackets, flush pipe of PVC 32mm bore and connection to WC pan complete all as specified.

S&F in repair urinals without sensor (back inlet) with all fixing accessories of size 265 x 335 x 695mm complete all as specified and directed. (Make : CERA Cat part No S4020116 or techno commercially equivalent as approved by GE.)

S&F in repair urinal flush valve concealed push type (single flush ) 32mm of chromium plated for fixing with 15 mm dia pipe complete all as specified and directed. (Make : CERA Cat part No F8010108 or techno commercially equivalent as approved by GE.)

S&F in repair vitreous china,white wash hand basin of size 630 x 450 x 225mm with half pedestal height 585mm complete all as specified and directed by Engineer-in-Charge. (Make : Cera WHB Cat Part No. - S2040104 & Pedestal Cat Part no. S2090103 or techno commercially equivalent as approved by GE.)

S&F in repair bib taps long body, 15mm bore dia, fancy type, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe complete all as specified and directed.

S & F in repairs 15mm bore CP Angle cock one way chromium plated, high pressure, with crutch or butterfly handle, screwed both ends of iron pipe or for union and fixed complete all as specified and directed.

S&F in repairs 20 mm size gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and gate valve complete all as specified and directed.

S&F in repairs 15 mm size pillar cock with swan neck spout(Left / right) and aerator fancy type cast copper alloy chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed. (Make :CERA Cat part No F2014104 or techno commercially equivalent as approved by GE.)

S&F in repair PVC connection 15 mm size with PTMT nuts on both end, length 600 mm, complete all as specified and directed.

S&F in repair brass chromium plated bottle traps for wash basins and urinal with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and directed.

S&F in repair stainless steel grating doom 150 x 150mm complete all as specified and directed.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed.

S&F in repair toilet paper holder with stainless steel wall flange complete all as specified and directed. (Make : Cera Cat part No F5015109CH or techno commercially equivalent as approved by GE.)

S&F in repair towel ring with stainless steel wall flange complete all as specified and directed. (Make : CERA Cat part No F5013115CH or techno commercially equivalent as approved by GE.)

S&F in repair urinal partition with frosted glass 10mm chrome finish of size 900mm x 450mm complete all as specified and directed (Make : CERA Cat part No S4090105 or techno commercially equivalent as approved by GE.)

S&F in repair soap dispensor with glass bottle complete all as specified and directed. (Make : CERA Cat part No F5012111CH or techno commercially equivalent as approved by GE.)

S&F in repair soap dish (Glass) holder with wall flange complete all as specified and directed. (Make : CERA Cat part No F5013116CH or techno commercially equivalent as approved by GE.)

S&F in Hand rail wall mounted hinged size 750x100 mm complete all as specified and directed. Make : (Cera CAT No. B2210108 or techno commercially equivalent as approved by GE.)

S&F in wall mounted Grab bar 600mm long complete all as specified and directed. Make : Cera cat No. B2210106 or techno commercially equivalent as approved by GE.)

S&F in wall mounted inverted 'L' shaped grab bar with 500 & 700mm long bars complete all as specified and directed. Make : Cera cat No. B2210103 or techno commercially equivalent as approved by GE.)

S&F powder coated anodised aluminum frame/shutter for doors, windows, ventilators or other similar works with one or more rebates including jointing cleat for fixing etc. complete all as specified and directed.

S & F roller suitable for aluminium slider complete as approved by GE.

M&L for 16-18mm thick granite stone slab (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) or chemical adhesive including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by Engineer-in-charge.

Material and labour for providing kitchen cabinet and cubboard in required sizes at site made out of 18mm thick PVC sheet (prelam) having one side decorative laminated sheet (for shutter, sides of cabinet, partition and shelves etc). All the edges of shutter and front exposed edge of partition/shelves shall be covered with 2mm thick edge bonding tape as per manufacturer complete all as specified and as directed by Engineer-in-charge. Note :- (i) The area of each sheet (shutter, sides of cabinet, partition and shelves) shall be measured in sqm for payment. (ii) Magnetic catcher, handles, soft closing hinges and PVC frame (where required) shall be measured and paid separately under appropriate item of BOQ. (iii) Any other material required for making/fixing/hanging of cabinet shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account.

S&F Stainless steel tower bolt 75mm long fency type heavy duty complete all as specified and directed by Engineer - in - Charge.

S&F stainless steel handles of size 75mm fency type heavy duty complete all as specified and directed by Engineer - in - Charge.

Supply and fixing Magnetic catcher fixed with steel screw complete all as specified and as directed by Engineer-in-charge.

S & F auto hinges (zero degree or eight degree) for kitchen cabinets as approved by GE.

S & F multipurpose drawer lock for kitchen cupboard as approved by GE.

Excavating in trenches not exc 1.5 metre wide and not exc 1.5 metre in depth for foundation or for shafts, walls, manholes, laying of cables, pipes etc not exc 10 Sqm on plan and getting out in any type of soil complete all as specfied and directed.

Material and Labour for Hardcore of broken stones of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specfied and directed.

M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in foundation of columns,building pillar,posts,struts,etc. filling and mass concrete complete incl formwork complete all as specfied and directed.

M&L for Granite 16-18 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms over cement screed base15mm in CM 1:6 and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specfied and directed.

M & L for Steel work as in tubular trusses as in post including special shaped washer and etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specfied and directed.

S&F mild steel purpose made bolts of diameter of neck exc 12 mm but n.exc 20 mm with hexagonal or square head one end and screwed the other or screwed both ends, each screwed ends to be fitted with washers and one hexagonal or square nut exc 30 cm long complete all as specfied and directed.

S&F thermal coated one sided Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specfied and directed.

S&F thermal coated pre painted galvalume aluminum Zinc coating GI based plain steel sheeting 0.5mm thick of any colour having tensile strength of 550 MPA as in ridge ,gutters etc fixed with self tapping screws complete all as specfied and directed.

S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes with riveted, bolted or welded attachement conforming to Fe 410 W (Grade E-250,quality 'A' ) complete all as specfied and directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base 20mm in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specfied and directed.

M&L for PCC 1:2:4, nominal mix, type B-0, using 12.5mm graded crushed stone aggregate as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, coping, bed plates and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work, complete all as specfied and directed.

M&L for rendering 10mm thick plaster in cement morter (1:4) on fair face of concrete brick masonary finishing the surface even and smooth using extra cement complete all as specfied and directed.

Returning filling in, including spreading, levelling watering and well ramming in layer not exc 25 cm thick complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specfied and directed.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc including welding, grinding,buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement are as follows:- Top horizontal 50 mm SS Pipe 01 No ,20 mm SS Pipe 03 No's, 40 mm vertical SS round Pipe for pole 90 CM Height etc complete all as specified and as directed.

M&L Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

M&L for providing 25mm thick precast cement concrete type B0 (1:2:4) using 12.5 mm graded aggregate set in CM(1:4) louvres and jallies, including all mouldings but excluding frame complete all as specified and directed.

Material & Labour for applying Two coats of 100% Premium acrylic emulsion paint havingVOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces complete all as specfied and directed.

Taking down carefully copper/ aluminum point wiring (Light, fan, socket, power and Bell) including fixture and fittings such as switches, sockets, ceiling roses, lamp, holder , regulators, sockets light fittings etc , removing material to store for keeping in safe custody or for taking credit , and making good disturbed surface of walls, floors, etc. complete all as specified and as directed.

M&L for point wiring with 1.5 Sqmm single core PVC insulated unsheathed multi stranded copper conductor FRLSH cable 1100V grade drawn through and incl PVC concealed conduit with accessories like bends tees, junction boxes etc fixed recessed in wall or ceiling etc including 1.5 Sqmm single core PVC insulated but unsheathed multistrandard copper conductor FRLSH cable 1100V grade as earth continuity wire incl modular sunken type pressed steel terminal boxes of size with 3mm thick bakelite steel white/coloured top cover for the following :-

(a) One light point/bell/fan point controlled by one switch complete all as specified and as directed.

(b) One 3 pin socket out let 5 Amps on the independent board complete all as specified and as directed.

(c) One 3 Pin socket out let 5 Amps on the same board complete all as specified and as directed.

All asp er item No 105 here in before but with cable of size 2.5 Sq mm PVC insulated on independent board for power plug 15 Amps complete all as specified and as directed.

S&F in replacement modular switch one way 6A,1 Module,complete all as specified and directed.

S&F in replacement Modular switch one way 16A,1 Module, complete all as specified and directed.

S&F in replacement Modular socket 6/10A-2/3 pin combined 2 Module complete all as specified and directed.

S&F in replacement Modular socket 16/15A-2/3 pin combined 2 Module complete all as specified and directed.

Supply and fixing in replacement white cover plate with frame, 3 module complete all as specified and directed

Supply and fixing in replacement white cover plate with frame, 6 module complete all as specified and directed

Supply and fixing in replacement white cover plate with frame, 8 module complete all as specified and directed

Supply & fix ceiling rose 3 terminal/ poly carbonate, isolated body complete all as specified and directed.

M&L in replacement for concealed sub main wiring complete with PVC insulated FRLSH cable of single core 4 Sqmm 1100 volts grade with multi standard copper conductor for drawn through and including conduiting PVC Conduit with accessories incl 4 Sqmm unsheathed multi standard FRLSH copper conductor as earth wire incl taking down unsv sub main wiring complete all as specified and as directed. Note: Two runs of cable and one run of conduit & earth wire shall be measured as one run length.

S&F in replacement of sheet metal enclosure, single phase, double door SPN DB 8 way, flush to wall mounting for MCB fitted with 200 Amp rated bus bars and neutral links ( without MCB's) SPN/ TPN complete incl taking down unsv DB complete all as specified and directed.

S&F in replacement of 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and neutal and current carrying capacity in the MCB of 32 Amp, complete with connection testing and commissioning incl taking down old unsv MCB complete all as specified and directed

S&F in replacement MCB SP 6 to 32 Amp 10 KA 240 V, 10 KA 'Ç' Curve incl taking down old unsv MCB complete all as specified and directed.

S&F in replacement LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete incl taking down old unsv light fittings complete all as specified and directed.

S&F in replacement LED light fittings mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including conencting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

divyarsh entrprise (BID ID -3499135)

ALBA AC AND REF SERVICES (BID ID -3502665)

Haritwal traders (BID ID -3502189)

Electricals India (BID ID -3501418)

Ramdev and Sons (BID ID -3499531)

Abhishek Enterprises (BID ID -3502555)

Priya Construction co. (BID ID -3500038)

ARTI CONSTRUCTION (BID ID -3502658)

M/s Bombay Novelty Stores (BID ID -3501241)