MAINTENANCE OF DRAINS, KERBSTONE, FOOTPATH AT IIE HARIDWAR SECTOR 12

Brick masonry work in cement mortar in substructure complete excepting pointing and plastering, as per drawing and technical specification Clauses 602, 603, 604, 1202 & 1204 In 1:4 Cement mortar

Plastering with cement mortar (1:4), 15 mm thick on brickwork in substructure as per technical specification Clauses 613.4 & 1204

Providing concrete for plain/ reinforced concrete in open foundations complete as per drawing and technical specifications clause 802, 803, 1202, 1203. PCC grade M20 nominal mix 1:2:4

Providing concrete for plain/ reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 R.C.C. grade M 25

Supplying, fitting and placing HYSD bar reinforcement in foundation complete as per drawings and technical specifications Clauses 1000 and 1202

Chequerred precast cement concrete tiles 22mm thick in foothpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and clearing etc. complete, on 20mm thick bed of cement mortar 1:4 (1 Cment : 4 Coarse sand). Dark shade pigment using ordinary cement

Painting Two Coats on New Concrete Surfaces Painting two coats including primer coat after filling the surface with synthetic enamel paint in all shades on new, plastered / concrete surfaces as per drawing and Technical Specification Clause 1701

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete etc. as per direction of Engineer- in-charge (length of finished kerb edging shall be measured to calculate volume for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).

Slip clearance (by manual means) of loose earth and other small loose materials including disposal complete as directed by the Engineer-incharge (clearance of Old deposite material from green area)