Jal Jeevan Mission -RWSS TO NEDUMKUNNAM-KANGZHA- BALANCE -2020-2021-pipe line extension of Mukkavala-Valavanoli-Kunnikadu road and Supply, errection and commissioning of various pump sets-Pipeline Work

Amount

APPENDIX-A

100.59.1:Cutting the bituminous / concrete roads with cutting machine for a minimum depth of 200mm along the sides of proposed alignment of the pipe to be laid without causing any damage to other utilities, including the charges for hire and conveyance of tools and plant, cost of consumables and charges for lighting, watching, ribbon fencing, caution boards, traffic diversion, and as per the direction of departmental officers etc. complete, before carrying out the demolition of bituminous / concrete road by mechanical means and carrying out the excavation.

15.2.1:Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

100.1.1:Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed, within a lead of 50m, in all kinds of soil.

100.1.5:Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed, within a lead of 50 m, in Ordinary Rock.

100.2.7:Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed, within a lead of 50m, in Medium Rock where Blasting is Prohibited.

100.8.1:Fencing one side of trenches, 1.50m height with two rows of 10cm plastic caution tape in vertical casuarina pole (girth 15cm to 24cm) fixed at 2m intervals.

100.8.2:Fencing 1.50m high with two rows of casuarina poles (girth 15cm to 24cm) tied with coir yarn on vertical casuarina pole (girth 15cm to 24cm) fixed at 1.5m intervals.

100.9.9:Laying uPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipeline to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipeline with water to the required test pressure (excluding cost of pipes and specials): 110 mm nominal outside diameter pipes.

100.9.8:Laying uPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipeline to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipeline with water to the required test pressure (excluding cost of pipes and specials): 90 mm nominal outside diameter pipes.

100.12.9:Conveying and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc., but excluding cost of pipes and fittings for External work: 100mm diameter nominal bore.

OD91209/2023-2024:Conveying and fixing G.I. pipes complete with G.I. fittings EXcluding trenching and refilling etc., but excluding cost of pipes and fittings for External work: 100mm diameter nominal bore.

100.12.8:Conveying and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc., but excluding cost of pipes and fittings for External work: 80mm diameter nominal bore.

OD91210/2023-2024:Conveying and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc., but excluding cost of pipes and fittings for External work: 80mm diameter nominal bore.

OD91211/2023-2024:Taking interconnection from the existing upto 80/90 mm to 100/110mm GI/PVC pipeline to the newly laid upto 80/90 mm to 100/110mm mm GI/PVC pipeline, using Tee connection with suitable specials and joined together to get a watertight joint as directed by the departmental Officer at the site, including the cost of materials, labour charges, conveyance etc. complete.(TEE connection only)

OD91212/2023-2024:Fabricating MS/GI flanges of diameter of 80mm using 10mm thick or nearest size MS/GI plate including cost and conveyance charges of MS plate, all fabrication charges, charges for painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under coat of primer etc.. complete

OD91213/2023-2024:Fabricating MS/GI flange of dia 100mm using 10mm thick MS plate including cost and conveyance charges of MS plate including cost and conveyance charges of ms plate all fabrication charges ,charges of painting the steel work with two more coal deluxe multi surface paint to give an even shade over an under coat of primer etc complete for pipes fabricated with 8mm thick MS plate

OD91214/2023-2024:Providing 80mm flanged joints to double flanged CI/DI/MS/GI pipes and specials, including testing of joints

OD91215/2023-2024: Providing 100mm flanged joints to double flanged CI/DI/MS/GI pipes and specials, including testing of joints

OD91216/2023-2024:Cutting and grinding 80mm GI/MS pipe and specials by gas cutting including cost of gas, all labour and hire charges of tools etc...

OD91217/2023-2024:Cutting and Grinding 100mm GI/MS pipe and specials by gas cutting including cost of gas,all labour and hire charges of tools etc complete

OD91218/2023-2024:Welding 80mm GI/MS pipe and specials by gas or electric plant for three run welding including cost of welding rod, gas all labour charges and hire charges of tools etc..complete

OD91219/2023-2024:Welding 100 mm GI/MS pipe and special by gas or electric plant for three run welding including cost of welding rod / gas, all labour and hire charges of tools etc complete.

OD91220/2023-2024:Jointing 80/90 mm AC/PVC/DI/GI pipes laid to lines and levels in the trenches using CID/CIR. detachable or any available type of joints after cleaning the ends, centering the pipes inserting the joints and tightening including conveying the materials within initial lead and other sundries etc. complete to make a water tight joint capable to withstand the required pressure (including cost of CID/CIR Joint).

OD91221/2023-2024:Jointing 100/110 mm AC/PVC/DI/GI pipes laid to lines and levels in the trenches using CID/CIR. detachable or any available type of joints after cleaning the ends, centering the pipes inserting the joints and tightening including conveying the materials within initial lead and other sundries etc. complete to make a water tight joint capable to withstand the required pressure (including cost of CID/CIR Joint).

OD91222/2023-2024:Conveying and fixing 80mm CIPE PN 1.6 sluice valves (with cap)Conforming to IS 14846 - 2000 by providing complete with bolts, nuts, rubber insertions etc. including the cost of valve (the tail pieces if required will be paid separately)

OD91223/2023-2024:Supplying conveying and fixing 100mm CI PE sluice valve with cap confirming IS 14846-2000, by providing bolts, nuts, rubber insertions etc...complete, including cost of 100mm valve size PN 1.6 (Tail piece is required paid separately)

OD91224/2023-2024::Supply of 80/90mm CID/CIR joint sets for valve fixing (Joining charge including valve fixing)

OD91225/2023-2024:Supply of 100/110mm CID/CIR joint for fixing valve (Joining charge including valve fixing)

18.17.5:Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :65 mm nominal bore

OD91226/2023-2024:Supplying and providing good quality 20mm CI Air valve in distribution main of 75mm to 200mm pipe fixing in suitable place including cost of MS saddle, 20mm GI/Schedule 80 ASTM/25mm UPVC 12.5kg/cm2 average 3.00m, air valve, earth work excavation, hire for tools, plants and all other incidental charges, labour charges etc.. complete as per direction.

2.1.1:Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:All Kinds of soil

100.41.39:Supply, stacking, spreading and consolidating of Quarry Muck in the trench of pipe line, including carriage, loading, unloading & stacking up to any lead.

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

OD194732/2023-2024:Alteration/ Making re -connection with the existing water connection /SF connection-Alteration using 20mm Indian Standard Class 6 uPVC pipe and uPVC Brass specials viz. brass ferrule, Elbow,MTA(Brass Threaded,), FTA(Brass Threaded,), couplers etc. and connecting with the mains, testing the joints etc. complete including trenching and refilling in all kinds of soil up to a depth of 1.50m for main line tracing and trench of average cross section 0.3m x 0.75m for laying connection pipe and service pipe, safely removing & re-fixing existing water meter, lighting, watching,providing caution boards, traffic control etc.complete including cost of materials, hire for tools, cost of consumables and labour charges as per the directions of the department officers.

100.60.3.2.2:Providing additional length of house connection pipe using 25mm Indian Standard Class 6 uPVC pipe and specials and testing the joints etc., by trenching and refilling in all kinds of soil with trench of average cross section 0.3m x 0.75m for laying of connection pipe and service pipe, lighting, watching, providing caution boards, traffic control etc., hire for tools, cost of consumables and labour charges etc. complete, but excluding the cost of cutting of concrete / tarred / bituminous roads, and excluding cost of materials etc., and as per the directions of the department officers.

cost of materials

OD91205/2023-2024:Supply of 100mm GI (M) pipe.as per relevant IS specification

OD91206/2023-2024:Supplying 110mm PVC 10kg/cm2 pipe .as per relevant IS specification

OD91207/2023-2024:Supply of 80mm GI (M) pipe as per relevant IS specification

OD91208/2023-2024:Supply 90mm PVC 8kg/cm2 pipe as per relevant IS specification

OD194745/2023-2024:Cost of PVC specials (Bends, Tee, coupler, Tailpiece, end caps, solvent cement,CID/CIR etc )

OD194746/2023-2024:Cost of GI specials (Bends,Tee,coupler, Tailpiece,end caps ,CID/CIR etc )

pump set

OD92118/2023-2024:-Supply Instalation trial run and Commissioning of control module for remote operation of 1 nos 40 HP vertical Turbine Pump set - at Raw water pump house,Kulathoormoozhy,

FARADAYS ELECTRIC WORKS

NARAYANANKUTTY P R

Bidder Name

NARAYANANKUTTY P R

FARADAYS ELECTRIC WORKS

SRI ROYAL ELECTRICALS