REPAIR/REPLACEMENT OF JOINERY AND CONNECTED ITEMS AT DAD AND FLOORING DADO ,PLINTH PROTECTION AND CERTAIN MISC B/R WORK AT DAD , MD ACCN AND OTM ACCN AT RAMGARH CANTT

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing of rubbish off the premises complete all as specified and directed.

M&L for joint free non skid coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc over & including 15mm thick screed bed in CM 1:4, set & jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified and directed.

M&L for coloured ceramic glazed tiles 375x250x7mm/ 450x300x7mm thick, laid in vertical surface as in dado/skirting etc over & including 10 mm thick rendering in CM 1:4, set & jointed in neat cement slurry & pointed in white or coloured cement complete all as specified and directed.

M&L for 9-10mm thick coloured vitrified ceramic tiles( light shade) polished area of each tiles not exceeding 0.36 sqm as in floors,set & jointed in neat cement slurry and pointed in coloured cement to match, over & including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M & L for 9mm to 10mm thick coloured vitrified ceramic tiles( light shade) polished area of each tiles not exceeding 0.36 sqm ,as in vertical surface such as dado/skirting etc ,set and jointed in neat cement slurry and pointed in colour cement to match the tiles, over & including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

S&F WC squatting pan " Orissa Pattern" of size 580 mm X 440 mm white with integral foot rest including cast iron "P" or "S" trap, front or back inlet and making connection to trap & to flushing cistern complete including taking down existing pan & making good disturbed surface complete all as specified & directed.

S&F in repair vitreous China wash down water closet (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), fixing seat cover including Plastic seat cover, connection to drain (or outgoing pipe, and to flushing pipe & antisyphonage pipe etc with aluminium hinging device complete all as specified and directed.

S & F in repair PVC flushing cistern 10 ltr capacity valve less syphonic action type low level with and including all standard accessories such as inlet ball valve float and handle, PVC flush pipe 32 mm bore & PVC connection 15 mm bore 450 mm long with PTMT nuts and brackets complete set & making good disturbed surface with CM 1:3 complete all as specified and directed.

S & F in repair vitreous China wash basin, any colour, flat back size 550 mm X 400 mm including 32mm brass chromium plated waste coupling , 32 mm bore PVC waste pipe, chromium plated Grating including cutting for & pinning in ends of bracket or errecting bracket & PCC 1:2:4 ,type B-1(using 20 mm graded crushed stone aggregate) for embedding brackets & making good disturbed surface with CM 1:3 complete all as specified and directed.

S&F in repair pillar taps fancy type, cast copper alloy with capstan head, chromium plated, screwed down with or without lettered 'Hot' or 'Cold' with long screw shanks and fly nuts, screwed for iron pipe and fixed for 15 mm bore complete all as specified & directed.

S & F in repair Grating doom 100mm dia of PTMT (minimum weight 25gms) complete all as specified and directed by Engineer-in- Charge.

S&F stop cock 15mm bore chromium plated with long shank fancy type cast copper alloy, screwed down high pressure, screwed both ends for iron pipe or for brass ferrule fixed concealed in wall etc complete all as specified and directed.

S&F in repair 15mm bore long body (weight not less than 400 gm) bib tap, cast copper alloy, CP fancy type with crutch or butterfly handle, screw down, screwed for iron pipe or for brass ferrule including flange complete all as specified and directed

Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes, etc for capacity of tank exc 500 litres but not exc 1000 litres complete all as specified and directed.

S&F in repair 20 mm bore ball/ float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gms) complete all as specified and directed.

S&F in repair for PVC connection 15 mm dia size with PTMT nuts of length 450 mm complete all as specified and directed.

S & F in repair brass chromium plated shower rose with swivel joints, 125 mm size in square with CP long shank arm including fixing to steel pipe or union complete all as specifed & as directed.

S & F in repair 32 mm bore Flush pipe of polyethylene of low or high density or PVC., for low level cistern complete all as specified and directed.

S & F in repair 15mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Taking up or down steel tubing and connections of 15 mm bore or removal to store complete etc and making good the surface in cement mortar 1:3 complete all as specified & directed.all as specified & directed. Note :Cutting chases, pinning in making good to facings where required for concealed water tubing include in unit quoted rate by bidder,not any claim entertained on this account.

S&F for GI water tubing medium grade, ISI marked, galvanised, 15 mm bore with all fittings, (such as tee, elbow, socket, union & short pieces) fixed to walls and ceiling or laid in floors including cutting chases for brick walls for concealed water tubing and making good the surface in cement mortar 1:3 complete all as specified & directed.

Taking up or down steel tubing and connections of 20 mm bore or removal to store complete etc and making good the surface in cement mortar 1:3 complete all as specified & directed.all as specified & directed. Note :Cutting chases, pinning in making good to facings where required for concealed water tubing include in unit quoted rate by bidder,not any claim entertained on this account.

S&F for GI water tubing medium grade, ISI marked, galvanised, 20 mm bore with all fittings, (such as tee, elbow, socket, union & short pieces) fixed to walls and ceiling or laid in floors including cutting chases for brick walls for concealed water tubing and making good the surface in cement mortar 1:3 complete all as specified & directed.

S & F in repair 20 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Demolition of cement concrete reinforced as in chullah hoods, shelves, cover slab and platform, etc,including removal of rubbish out off MOD land etc complete all as specified and directed

M & L for RCC 1:2:4, type B-1(using 20mm graded crushed stone aggregate) as in kitchen platform, shelves ,cover slab, etc. including necessary formwork with fair finish surface, complete all as specified and as directed.

M&L for mild steel TMT bars 8 mm to 10mm dia and over grade Fe-500, cut to length, bent to shape required, including cranking bending spirally for hooping for column,, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete etc all as specified and directed.

M&L for 18 to 20 mm thick granite slab (or any type) table rubbed and pre mirror polished in steps,jambs, pillar,window cill,cooking platforms and like in cement mortar1:4, set & jointed in neat cement slurry and pointed with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and polished , over & including 15 mm thick rendering in cement mortar(1:4) etc including dismantling of exsting slab complete all as specifed and as directed.

Demolition of brick work of any description and in any position built in cement or cement lime mortar including all quoins, arches, pillars including segregation of serviceable bricks for reuse & removal of rubbish out off MOD land etc complete all as specified and directed.

M&L brick work with sub class 'B' brick straight or curved on plan exceeding 6m mean radius build in cement mortar 1:6 complete all as specified and directed.

M&L for rendering 15 mm thick on fair face brick masonry/concrete surface etc in CM (1:6) surface finished even & smooth without using extra cement complete all as specified and directed.

M&L for rendering 5 mm thick in CM (1:3) on concrete surfaces as in ceiling, including finish the surface even and smooth without using extra cement including taking down of existing plaster complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and applying two coats of oil emulsion distemper over a coat of alkali resistant primer complete all as specified and directed.

Taking down PVC pipes rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks,etc., including cleaning (measured overall as fixed along the centre line over fittings and accessories) complete all as specifed & directied.

S&F 110 mm bore PVC(SWR) pipes single socketed, in any length with rubber ring joints, fixed on wall including PVC clamp properly for fixing of pipe with with PCC 1:2:4 complete all as specified and directed

S&F in repair PVC (SWR) bends for 110mm dia PVC pipes with rubber rings joints complete all as specified and directed

S&F in repair 110 mm PVC (SWR) vent cowl complete all as specified and directed.

S&F PVC (SWR) pipes 75mm single socketed in any length with rubber ring joints fixed to wall including PVC clamp properly for fixing of pipe with with PCC 1:2:4 complete all as specified and directed

S&F in repair PVC (SWR) bends for 75mm dia PVC pipes with rubber rings joints complete all as specified and directed

Demolition of plain cement concrete(un-reinforced) in ground floors, terrazo tiles floor & paving not exceed 15cm thickness (below or above ground level) and removal of rubbish off from site complete all as directed by Engr-in-Charge.

M & L for 75 mm thick plain cement concrete (1:3:6) mix, type C-1 (using 20mm graded crushed stone aggregate ) as in plinth protection, finishing the surfaces even and fair without using extra cement, including 10 mm wide, 75mm deep joints made at 3.00 m in length and filled with bitumen 85/25 grade and sand in the ratio 1:3 including necessary form work , complete all as specified and directed.

M&L for 100 mm thick cement concrete 1:2:4, type B-2 (using 20 mm graded aggregate) as in PCC flooring finish even and smooth without using extra cement,complete all as specified and directed.

S&F in repair Vertical blinds curtain consist of a series of Vertical fabric louvres or slats, twisted to close and obscure the window or opened wide to let in lots of light. The louvres are linked together by a chain and are operated using a cord, positioned at the far right or left of the blind complete all as specified and directed.

Taking down chowkats or frames with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames) etc including builders hardware etc & making good disturbed surface of wall with CM 1:3 complete all as specified and directed

Taking down chowkats or frames with shutters exceeding 1.5 Sqm but not exceeding 4 Sqm each (without taking off shutters from the frames) including builders hardware etc & making good disturbed surface of wall with CM 1:3 complete all as specified and directed

Taking down shutters of any description exceeding 1.00 Sqm but not exceeding 2.0 Sq m each and removing from site, complete all as specified and directed by Engr-in-Charge .

S & F 35 mm thick, factory made, 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass, gauze, etc. (divided into squares with plain, chamfered or rounded, mitred and rebated sash bars any number size of members), beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a); kiln seasoned & chemically pressure treated etc complete all as specified and directed . (Note:- (i)Glass / wire cloth shall be measured & paid separately. (ii) Sample of shutter in sample room of GE office.)

S & F 30 mm thick factory made, IInd class hard wood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed . .

S&F for 1.25 mm thick pressed steel frames of size 105 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc including plain cement concrete 1:3:6, type C-0 (using 12.5 mm graded crushed stone aggregate) as in filling in pressed steel door complete all as specified and directed. Note: The quoted unit rate under this item shall deemed to be included (i) one shop coat of primer (ii) a coat of bitumen paint of inner side of pressed steel door frame before filling of PCC.

Forming jambs etc in CM 1:4 to openings (to foregoing item), including cutting toothing and properly bonding into old work, also facing, jointing and painting tiling, painting to match existing work, complete all as specified and directed.

M&L for hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe -290 Gde E-165 complete all as specified and as directed.

M&L plain cement concrete 1:3:6, type C-1 (using 20 mm graded crushed stone aggregate) in for inserting hold fast of doors & window , bed blocks,fillings of hold fast & similar work etc. including necessary form work complete all as specified and directed.

S & F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tubes suppyling & fixing in opening as per specification & drawing complete all as spcefied and directed by Engineer-in-Charge.

S & F for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails. mild steel framed shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail &bottom rail on either side & as gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS framed welded/sealed to stiles & rails with suitable PVC sheet beading & joined together with solvent cement complete all as fixing in the frame at site as per specification and drawing including 3 Nos stainless steel butt hinges 100 mm long for each door, complete all as specified and as directed.

S & F 100 mm size Butt hinges medium weight cold rolled mild steel and fixed complete all as specified & directed.

S & F Aluminium anodised handles of extruded section and fixed 150 mm long complete all as specified & directed.

S & F Aluminium anodised barrel tower bolts of extruded section and fixed 150 mm long complete all as specified & directed. .

S&F steel window with side hung shutters including box type hinges with steel handles and steel peg stay complete with glazing bars, dovetailed or welded with four Nos mild steel flat iron 25 mm X 3mm ,200 mm length (appx) & two Nos mild steel tower bolt 150 mm long and one peg stay on each leaf complete all as specified and directed

S&F steel window with side hung shutters including box type hinges with steel handles and steel peg stay complete without glazing bars, dovetailed or welded with four Nos mild steel flat iron 25 mm X 3mm ,200 mm length (appx)& two Nos mild steel tower bolt 150 mm long and one peg stay on each leaf complete all as specified and directed

S & F for steel windows or ventilators, fixed type, with glazing bars complete including prepartion of new or previously untreated steel surface of any description , not otherwise described over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed.

S&F Galvanised mild steel wire cloth 0.45mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks etc complete all as specified and directed.

S&F in repair Galvanised mild steel wire cloth 0.45mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks etc complete all as specified and directed.

Hacking out old boken glass(any thickness, size, quality or description) from wooden frames/steel frames, glazed with oil putty or fixed with beads complete all as specified and directed

M & L for 3mm thick plain sheet glass ordinary quality and glazing with oil putty not exceeding 0.50 Sqm in each pane,complete all as specified and as directed by Engineer-in-Charge .

S&F 3.0 mm thick frosted glass pin headed type in squares/ rectangular not exceeding 0.5 Sqm in each pane glazing with oil putty or aluminium frame/shutters with rubber neoprene beading complete all as specified & directed.

M&L for prepartion of new or previously untreated steel surface of any description , not otherwise described over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed.

M & L for preparation of new wooden surface of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

S&F Aluminium anodised door stopper with rubber shoes of overall size 150mm long complete all as specified and directed.

S&F mild steel 300 mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified & directed.

S&F in repair mild steel 300 mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified & directed.

S&F for snack guard of size 35mm x 5mm thick fixed with door shutter with nails/screw complete all as specified and directed.

S&F in repair 20 mm dia Harrison rails, anodised aluminium alloy with bracket etc., complete all as specified and as directed by Engr-in-Charge.

S & F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracked guard and railing 60cm long complete all as specified and directed.

S&F in repair brass chromium plated towel rail , 20 mm dia ,D-type 600 mm long between flanges fixed with and including chromium plated brass screw & wooden /plastic cleats complete set all as specified and directed.

S&F in repairs stainless steel sink with drainage board made out of 1.0 mm thick sheet for kitchen with plug washers, waste pipe including bedding in cement mortar on dwarf wall or including cast iron cantiliver brackets connecting union overall soze 915 x 460mm with bowl size 410 x 352 x178mm or 405x355x178mm complete all as specified and directed.

S&F mild steel cupboard shutter with frame, Godrej pattern made out 22 gauge mild steel sheet including chromium plated MD handle with proper looking arrangement (brass mortice lock, verticale type size 65mm, 4 liver with escutecheon plates & two key) with and including two coats of spray painting with synthetic enamel paint of approved tint over a coat of red oxide primer including fixing with 6 Nos 12mm dia bolts 150mm long grought in brick wall/concrete including taking down of existing shutter & making good the distrubed surface complete all as specified and directed by Engr-in-Charge

Taking down shutters of any description not exceeding 1.0 Sq m each & refixing of shutter in same opening after repair including suitable size hinge for fixing of shutter ,if vrequired complete all as specified and directed by Engr-in-Charge .

Running welding in repairs thickness of metal to be welded exceeding 6mm but not exceeding 9mm include for cleaning and preparing the surfaces to be welded together, holding the members in true position while welding and bevelling of edges, complete all as directed by Engr-in-Charge.

S&F wooden beads of any size of Ist class hard wood Square / triangular in cross section, plain or desigen for fixing of mosquito net jali ,glazed or gauzed joinery,renewed, including mitres etc.and removing old beads complete all as directed by Engineer in Charge

M/S tiwari enterprises (BID ID -3101144)

upadhyay engineers and consultant (BID ID -3096582)

M/S Bhushan Kumar Jain (BID ID -3099414)

M/s Ramgarh Raj Construction Pvt Ltd (BID ID -3096620)

M/s Ray construction (BID ID -3098561)