A/R and M/O LWSS Daulatpur jalari in Tehsil and Distt Kangra HP.

Excavation in foundation,trenches etc. in earth work in all kinds of soil such as pick work, jumper work, blasting hard of soft rock by chiselling where the blasting work is prohibited slushy daldal and saturated soil including pumping or bailing out water within all heights, stacking the excacated soil within all leads clear from the edge of excavation and then returning the stacked soil in 150 mm (fifteen centimetres) layer when required into plinths, sides of foundation consolidating each deposited layer by remming and watering and then disposing of all surplus excavated earth complete in all respect as per the direction and to the entire satisfaction of Engineer-in-Charge within all leads and lifts.

Providing and Laying Cement concrete 1:3:6 (1cement: 3 sand: 6 graded stone aggregate 40mm nominal size and curing complete excluding the cost of form work in foundation and plinth complete in all respect as per the direction and to the entire satisfaction of Engineer-in-Charge within all leads and lifts.

Providing form work with steel plates 315 mm thick welded with angles iron in frame 30 x 30 x 5 mm so as to give a fair finish including centering, shuttering strutting and propping etc. with wooden bottens and ballies, height of propping etc. and centering below supporting floor to ceiling not exceedin 4 meters and removal of the same for in-situ reinforced concrete and plain concrete work in:-

Beams, cantilevers, girders & lintels etc.Sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels not exceeding 1 mtrs. In depth in all heights from floor complete in all respect as per the direction and to the entire satisfaction of Engineer-in-Charge within all leads and lifts.

Vertical surfaces such as walls (only thickness) partitions and the like including attached pillasters buttresses, plinth and string courses and the like complete in all respect as per the direction and to the entire satisfaction of Engineer-in-Charge within all leads and lifts.

Providing and Laying cement concrete work 1:1/12:3 (1cement:1/12 sand: 3 graded stone aggregate 20mm nominal size)and curing complete excluding cost of form work and reinforcement for reinforced concrete work:-

In foundation and plinth complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge within all leads and lifts.

Wall (any thickness but not less than 0.1 m thickness) attached pilasters, buttresses, plinth and string courses etc. from top of foundation level upto floor two level complete in all respect as per the direction and to the entire satisfaction of Engineer-in-Charge within all leads and lifts.

Suspended Floors, roofts landing and shelves and their support balconies beams girders bressumers and cantilevers Upto Floor 2 Level complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge within all leads and lifts.

Providing in RCC work smooth finishig of the exposed surface with cement mortar 1:3 (1cement:3 sand) complete in all respect with in all lead and lifts.

Providing mild steel/Tor steel reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level complete in all respect as per the direction and to the entire satisfaction of Engineer-in-Charge within all leads and lifts.

Providing steel work welded in built upto sections bruses and framed work including cutting, hosting fixing in position and applying a priming coat of red lead paint in gratings framed quard bars, ladders, railling brackets and similar works in all respect including all leads and lifts as per direction and to the entire satisfaction of Engineer-in-Charge.

Laying, jointing & testing of GMS (plan ended pipe) with 100% flanged joints by electrical arc welding with minimum two layers capable to withstand required test pressure (minimum welding thickness shall be equal to pipe wall thickness) including manufacturing and fabrication of reducers/ tapers, all short pieces, bends of required degree as per site requirement made from parent tubes. dully welded in three layers (two for outer & one on inner side) and all other operation such as cutting, cleaning, welding, jointing, fabrication of bends, tees etc, lowering and laying in excavated trench to ensure required level i/c flushing, cleaning, and hydraulic testing complete in all respect including all leads and lifts as per the direction and to the entire satisfection of Engineer-In-Charge.

Inlet, Over Flow, Byepass, Outlet & Scour Pipe 100mm dia

Providing and Fixing Cast iron Sluice Valve Bir/Kartar Make of various dia (with hand wheel) PN-1 as per BIS 786-1984 latest upto date ammendments standard make with bols, nuts, rubber insertion etc. (The tail pieces if required shall be measured & paid for separately) complete in all respect including all leads and lifts as per the direction and to the entire satisfaction of Engineer-In-Charge.

100 mm dia

Constructing chamber for sluice valve, with CI surface box 100 mm top dia., 160 mm bottom dia. & 180 mm deep (inside) with chained lid, RCC 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) 100mm thick foundation concrete 1:5:10 mix (1 cement : 5 sand : 10 graded stone aggregate 40 mm nominal size) & inside plastering with cement mortar 1:3 (1 cement : 3 sand) finished with a floating coat of neat cement i/c curing complete. 600 x 600 x 750 mm inside size With 150 mm thick walls of RCC 1:2 :4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) complete with form work & reinforcement with 6 mm bars at not exceeding 150 mm centres both ways.

Providing & supplying of precast RCC (SFRC) manhole cover 560mm Dia with frame conforming to IS specifications Code- 12592 Part-I & II with latest amendment complete with in all leads and lifts.