Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.9 LAdmitted-Technical | L1 | Admitted-Technical Admitted in Tech.evaln. subject to the decision on Fin. Evaln. | |
| 2 | L2₹6.2 L+₹29,785.84 (5.03%)Admitted-Technical | L2 | Admitted-Technical Admitted in Tech.evaln. subject to the decision on Fin. Evaln. |
| Sl No | Description | Qty | Unit | T.N.Muraleedharan L1 | Kaippully L2 |
|---|---|---|---|---|---|
| 1.00FEEDING ROOM | |||||
| 1.00 | 21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):
For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) | 606.72 | kg | 584.7 ₹3,54,746.85 Lowest | 614 ₹3,72,523.62 |
| 1.00 | 21.1.2.2:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron) | 90.72 | kg | 708.2 ₹64,247.9 Lowest | 745 ₹67,586.4 |
| 1.00 | 21.12.2:Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0mm thick & 2100 mm long with S.S. screws etc. complete as per direction of Engineer -in-Charge.Powder coated minimum thickness 50 micron aluminium tubular handle bar | 5 | no | 706.5 ₹3,532.5 Lowest | 740 ₹3,700 |
| 1.00 | 21.2.2:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides | 63.45 | sqm | 1,192.5 ₹75,664.13 Lowest | 1,252 ₹79,439.4 |
| 1.00 | 21.4.2:Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS: 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors including cost of cutting floors, embeding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer -in- Charge.With brass cover plate minimum 1.25 mm thickness | 5 | each | 3,272 ₹16,360 Lowest | 3,436 ₹17,180 |
| 1.01 | 15.12.1:Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of area 3 sq. metres and below | 3 | each | 379.5 ₹1,138.5 Lowest | 399 ₹1,197 |
| 1.01 | 21.3.3:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm) | 40.95 | sqm | 1,876 ₹76,822.2 Lowest | 1,970 ₹80,671.5 |
Tender Value
₹5.9 L
EMD Value
₹14,814
Closing Date
17 Jul 2026, 4:00 pmClosed
Hamsa PI
The Assistant Engineer, LIDEW Section , Thiruvilwamala Grama Panchayat
Annual Plan-2026-27 CONSTRUCTION OF FEEDING ROOMS AND MAINTANACE IN HEALTH CENTERS OF THIRUVILWAMALA GRAMA PANCHAYATH.-PROJECT NO.64/2026-27
2026_LSGD_859626_3
02/2026-27/AE/LIDEW/TVMALA
Open Tender
Civil Works - Others
Item Wise
210 days
Thiruvilwamala GP
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,310
Yes
₹14,814
Yes
20 Aug 2026
9 Jul 2026
18 Jul 2026
9 Jul 2026
17 Jul 2026
9 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1FEEDING ROOM | |||||
| 1.001 | 21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):
For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) | 0.4 | kg | - | - |
| 1.002 | 21.1.2.2:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron) | 1 | kg | - | - |
| 1.003 | 21.12.2:Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0mm thick & 2100 mm long with S.S. screws etc. complete as per direction of Engineer -in-Charge.Powder coated minimum thickness 50 micron aluminium tubular handle bar | - | no | - | - |
| 1.004 | 21.2.2:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides | - | sqm | - | - |
| 1.005 | 21.4.2:Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS: 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors including cost of cutting floors, embeding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer -in- Charge.With brass cover plate minimum 1.25 mm thickness | - | each | - | - |
| 1.006 | 15.12.1:Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of area 3 sq. metres and below | - | each | - | - |
| 1.007 | 21.3.3:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm) | - | sqm | - | - |
stage.html
html • 0.03 MB
tech_eval.pdf
finance_1453841.pdf
boq_comp_chart.xlsx
xlsx
cancelled_1.pdf
pdf • 1.00 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.03 MB
Tendernotice_2.pdf
PDF • 0.02 MB
Tendernotice_3.pdf
PDF • 0.02 MB
BOQ_1453841.xls
BOQ • 0.30 MB
PAG.pdf
Tender Documents • 0.02 MB
viewsbd.pdf
Tender Documents • 1.65 MB
FMT.pdf
Tender Documents • 0.01 MB
Affidavit.pdf
Tender Documents • 0.01 MB
corrige.pdf
PDF • 0.25 MB
corrigendum.pdf
PDF • 0.25 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .