Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.4 LAccepted-AOC | L1 | Accepted-AOC Accepted being Lowest Bid Value | |
| 2 | L2₹11.9 L+₹53,725 (4.73%)Rejected-AOC ROOM NO 262 PART II NEAR SANKER MANDIR GANESH MURTHI NAGAR COLABA MUMBAI 05 | MUMBAI | L2 | Rejected-AOC Rejected being Higher Bid Value | |
| 3 | Rejected-Technical | - | Rejected-Technical Rejected due to not enlisted in approriate category |
Tender Value
₹12 L
EMD Value
₹24,000
Closing Date
1 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE PANAGARH
HQ CWE PANAGARH, MES, PO - PANAGARH, DIST - BURDWAN, WB, PIN - 713420
REPAIR TO CERTAIN ROADS AT NMS UNDER CWE PANAGARH
2024_MES_644379_1
8908/E8
Open Tender
Civil Works - Roads
Item Rate
180 days
NABAGRAM
Pls refer Tender Documents
7 documents required · 7 mandatory
₹500
AGE (I) NABAGRAM
₹24,000
Yes
16 May 2024
27 Feb 2024
9 Apr 2024
27 Feb 2024
1 Apr 2024
13 Mar 2024
Amount
Repair to potholes any depth, not exc 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by applying tack coat @ 5 kg per 10 sqm of bitumen grade VG-10, putting in premixed bituminous macadam using bitumen grade VG-30, well rammed and sealed with binder 9.8 kg per 10 sqm using bitumen grade VG-30, blinded with 0.09 cum of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings), complete all as specified and directed. Note : Pot holes register to be maintained by Engr-in-Charge and payment shall be made as per Pot holes register.
Preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc., Sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc., and applying evenly a priming/tack coat with bituminous primer at 5 Kg / 10 Sqm of bitumen grade VG-10 of road surface, complete all as specified and directed.
Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area n.exc 400 sqm, exc 50 mm and n.exc 100mm deep, complete all as specified and directed. Note : Scarifying include racking over and grading the broken up surface to the proper camber etc. as required.
M&L Bituminous premix semi dense asphaltic concrete 30mm consolidated thickness with 5.5% binder content with paving bitumen (VG-30) by weight of total mix, filler cement as per recommendation of design by weight of total mix from hot mix plant, rolled by with 8 to 12 tonne vibrating (tandom) road roller to confirm uniform surface and compacted to required camber and gradient complete with mechanical paver, complete all as specified and directed. [Note : (i) SDAC shall be laid using self propelled mechanical paver and prepartion of mix shall be done using computerised hot mix plant. (ii) The exact quantity of bitumen to be used shall be determined by design mix by Marshal method and approved by AGE (I) and cost thereoff shall be included in quoted rate.]
M&L premixed bituminous macadam using paving bitumen of VG-30, laid/rolled by 8 to 12 tonne capacity road roller and compacted to required gradient and camber (consolidated thickness 75 mm or less), binder contents of premixed macadam shall be 4% by weight of total mix (Design Mix) with VG-30 grade bitumen, complete all as specified and directed.
Add / deduct over Item Sl No. 5.00 mentioned above for each extra / less Kg of binder (VG-30) used, complete all as specified and directed.
M&L preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour including reflectorising beads @ 250 gms per sqm area and glass beads as per IRC-35 confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction including cleaning the surface of all dirt & other foreign materials, demarcation at site and control including taking out and refixing of old eyes/solar stud & finish surface to the uniform & free from holes etc., complete all as specified and directed. (Note : The repair of road work will be carried out in patches as per site requirement i.e. bell mouths, curves, widening of roads and road cutting for laying of cables/pipes etc. under entire domestic / tech aera where patch work is required.)
Abida Enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .