Providing & Erecting Indoor E.I. & Outdoor Lighting at Diesel Section under IMSD 2/1, Ukai.

BILL OF QUANTITIES

1. The bill of Quantities shall be read in conjunction with the Instructions to Bidder,

Conditions of Contract, Technical Specifications and Drawings.

2. The quantities given in the Bill of Quantities are estimated and provisional, and are

given to provide a common basis for bidding. The basis of payment will be the actual

quantities of work ordered and carried out, as measured by the Contractor and verified by

the Engineer and valued at the rates and prices tendered in the priced Bill of Quantities,

where applicable, and otherwise at such rates and prices as the Engineer may fix within

the terms of the Contract.

3. The rates and prices tendered in the priced Bill of Quantities shall, except in so far as

it is otherwise provided under the Contract, include all constructional plant, layout,

supervision, materials, erection, maintenance, insurance, profit, taxes and duties,

together with all general risks, liabilities and obligations set out or implied in the Contract.

4. The rates and prices shall be quoted entirely in Indian Currency.

5. A rate or prices shall be entered against each item in the Bill Quantities, whether

quantities are stated or not. The cost of Items against which Contractor has failed to enter

a rate or price shall be deemed to be covered by other rates and prices entered in the Bill

of Quantities (in case of Item rate contract).

6. The whole cost of complying with the provisions of the Contract shall be included in

the items provided in the priced Bill of Quantities, and where no Items are provided

the cost shall be deemed to be distributed among the rates and prices entered for the

related items of Work.

7. General direction and descriptions of work and materials are not necessarily

repeated or summarized in the Bill of Quantities. References to the relevant sections

of the contract documentation shall be made before entering rates or prices against

each item in the Bill of Quantities.

8. The method of completed work of payment shall be in accordance with the

specification for Road and Bridge works. For building works specifications for

building are to be followed.

9. Errors will be corrected by the Employer for any arithmetic errors pursuant to

Clause 29 of the Instructions to Bidder.

10. Rock is defined as all materials which, in the opinion of the Engineer, required

blasting, or the use of metal wedges and sledgehammers, or the use of

compressed air drilling for its removal, and which cannot be extracted by ripping with a

tractor of at least 150 kw with a single rear mounted heavy duty ripper.

BILL OF QUANTITIES

(A) Percentage Rate Tender (Up to INR 50 Cr. )

Name of Work: Providing & Erecting Indoor E.I. & Outdoor Lighting at Diesel Section under

IMSD 2/1, Ukai.

Item Quantities Item of Work Estimated Unit Total amount

Item Quantities Item of Work Estimated Unit Total amount

s estimated Rates(In according to

No. figures) estimated

1a 126 Providing & Erecting following Shockproof 31.31 No.

tissino type accessories erected on 3 mm thick PC

(Polycarbonate) sheet in PVC/ Metal Box. erected

on wall/ ceiling.

(a) One no Single pole 6 A Switch / Bell push

[Approved make - Anchor, GreatWhite, Havells,

1b 32 (b) One no 3/5 pin 6 A Socket [Approved make - 31.31 No.

Anchor, GreatWhite, Havells, Vinay, Fybros]

1c 16 (c) One no Single pole 16 A Switch & One no 94.94 No.

6/16 A Universal Socket combined [Approved

make - Anchor, GreatWhite, Havells, Vinay,

1d 53 (d) Bakelite ceiling rose [Approved make - 18.18 No.

Anchor, GreatWhite, Havells, Vinay, Fybros]

1e 45 (e) Bakelite lamp holder [Approved make - 22.22 No.

Anchor, GreatWhite, Havells, Vinay, Fybros]

1f 27 (f) Electronic Hum free EME Socket Type Steps 219.17 No.

Fan Regulator [Approved make - Anchor,

GreatWhite, Havells, Vinay, Fybros]

2 45 Bakelite adopter for Holder to be 9.09 No.

erected.[Approved make - Anchor, GreatWhite,

Havells, Vinay, Fybros]

3 4 Providing & erecting Switch board for Computer 332.29 No.

or electric apparatus consisting of following items

in single board erected on PVC / Metal/Wooden

board concealed/open with 3 mm thick PC

(Polycarbonate) / Acrylic sheet erected as

directed1 no. 6A/16A universal plug-switch

combined.3 nos. 6A Switch3 nos. 6A 5 pin Plug

[a] For Tissino Type Accessories [Approved make

- Anchor, GreatWhite, Havells, Vinay, Fybros]

4a 2500 Providing and erecting Mains with 1.1 KV grade 46.46 Mtr.

FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be

erected concealed in /flushed on wall/ceiling, with

1.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity

of following size.(A) in existing pipe

(a) 2 wire 1.5 sq. mm [Approved make - Polycab,

Havells, RRKabel, Finolex, Anchor]

4b 600 (b) 2 wire 2.5 sq. mm [Approved make - Polycab, 62.62 Mtr.

Havells, RRKabel, Finolex, Anchor]

5a 700 Providing and erecting ISI mark Medium class 24.24 Mtr.

RIGID PVC PIPES of following size complete to

be erected on/in wall or ceiling erected with

necessary PVC fittings & Junction boxes fixed

with adhesive solution & Clamps with following

dia of pipes, in approved manner as directed

(a) 20 mm [Approved Make - Finolex, Dutron,

Swastik, Aashirwad, Suprime]

5b 200 (b) 25 mm [Approved Make - Finolex, Dutron, 33.33 Mtr.

Swastik, Aashirwad, Suprime]

6 100 Supplying & erecting UPVC Mini trunking (PVC 36.36 Mtr.

Casing-n-Capping) having double-locking

arrangement with grooves, trunking of size not

below 12.5 mm in height as per IS with accessories

of PVC/Resin polypropylene not below 1.8 mm

thick duly sealed in joint & erected on wall /

ceiling of following size .(a) 32 mm [Approved

Make - Polycab, Precision, Nihir, Anchor, Vraj]

7 45 Supplying and erecting LED indoor fittings with 373.70 No.

LEDs of wattage 0.2 Watt to 0.5 Watt assembled

on single MCPCB, with housing used as a heat

sink shall be made of thick sheet Steel conforming

to IS: 513/CRCA/ aluminium die cast powder

coated and high U.V. & corrosion resistance with

diffuser with company mark/name 160V to 270V,

Power Factor more than 0.9, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.) (A)

Tube Light with integral driver (a) 22-24 Watts,

Surge - 2KV,IP-20, conventional 4 feet [Approved

Make - Philips, Wirpo, Crompton, Surya, Havells,

8 27 Providing and erecting Approved make Ceiling fan 1596.81 No.

with double ball bearing ISI mark with condenser

A.C. 23OV.50 c/s.1200 mm. sweep complete,

canopy erected on existing hook or clamp with

earthing. [Make shall be approved by Engineer in

9 27 Supplying and erecting 19 / 20 mm. nominal bore 108.07 No.

Medium Class M.S. Pipe down rod erected duly

painted for fan complete with proper insulation

without leakage and earthing.

10 27 Providing Fan clamp of 30 x 5 mm flat of required 98.98 No.

length & 10 mm M.S. Bolt & Nuts erected with

necessary hook of 10 mm M.S. Round Bar.

11 2 Supplying and erecting approved make pedestal 2141.20 No.

fan A.C. 230V. 50 Cy/s. 400 mm sweep oscillating,

type and adjustable, height complete with guard

regulator, & standard lead flexible wires and plug

top.[Approved Make - Usha, Crompton, Almonard,

Orient, Havells]

12 2 Supplying & erecting single phase approved make 2054.34 No.

industrial exhaust fan suitable for medium duty

ring mounted low noise operation suitable for

medium duty having following dia size and

maximum speed in RPM [a] 305 mm dia 900 RPM

[Approved Make - Usha, Crompton, Almonard,

Orient, Havells]

13 48 providing and erecting Miniature circuit breaker 112.11 No.

single pole 6A to 25A suitable to operate on 240 V

A.C. system and having breaking capacity 10 KA

to be erected in existing box. confirming to IS

8828/1996 with ISI Mark [Approved Make -

Schneider, L&T, ABB, Siemens, Havells, MDS,

14 44 Providing & erecting 240 V MCB double pole 278.76 No.

switch for lighting Load (B Curve) having 10 KA

breaking capacity & confirms to IS : 8828 in

existing box having following capacity. (a) 6 to

Amp. [Approved Make - Schneider, L&T, ABB,

Siemens, Havells, MDS, C&S]

15 13 Providing & erecting 415V MCB Four Pole Switch 578.73 No.

for Lighting Load (B curve) having 10KA breaking

capacity & confirms to IS :8828 in existing box

having following capacity.(a) 6 to 32 Amp.

[Approved Make - Schneider, L&T, ABB,

Siemens, Havells, MDS, C&S]

16 10 Sheets steel powder coated enclosure suitable for 176.75 No.

incorporating One/Two nos. MCB.

17a 3 Providing and erecting Sheet Steel powder coated 629.23 No.

MCB distribution board - flush / surface mounted

fitted with busbar, neutral link, earth bar and DIN

rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &

without MCB to house appropriate nos. of

MCBs.(The DBs should be used of same company

of MCB to be used) suitable for (A) single phase

incoming and horizontal single phase outgoing

(i)sheet steel double door (IP-43) (a) 4 way .

17c 5 (c) three phase incoming and single phase 2339.16 No.

horizontal type outgoing Per phase isolation type

(PPI) (a) sheet steel double door (i) 4 way

18 4 Providing and erecting Approved make RCCBs 2235.13 No.

conforming to IS: 12640 and having sensitivity of

30 mA and Short Circuit withstand capacity of

KA and suitable for operation on single phase

V,50Hz. having characteristic of quick action &

tripping with all advance feature & do not

incorporate any electronic component. for

following Max. rating erected as directed. (a)

40Amps. DP [Approved Make - Schneider, L&T,

ABB, Siemens, Havells, MDS, C&S]

19 4 Providing and erecting Approved make RCCBs 2637.11 No.

conforming to IS: 12640 and having sensitivity of

30 mA and Short Circuit withstand capacity of

KA and suitable for operation on 3 phase and

neutral 415V,50Hz. having characteristic of quick

action & tripping with all advance feature & do not

incorporate any electronic component for following

Max. rating erected as directed (a) 40Amps. FP

[Approved Make - Schneider, L&T, ABB,

Siemens, Havells, MDS, C&S]

20 10 Providing and erecting Approved make Four pole 6173.12 No.

moulded case circuit breaker having breaking

capacity ICU of 25 KA. at 415 V,having normal

current rating up to 25 A to 100A. with Fixed

thermal & magnetic release suitable to work on

A.C. supply 50 c/s. with all internal connections,

spreader tinned copper & complete erected in

existing 16 G.M.S. housing. ICS=100% of ICU

only [Approved Make - Schneider, L&T,

ABB, Siemens, Havells, MDS, C&S]

21 2 Providing and erecting Approved make Four pole 16221.61 No.

moulded case circuit breaker having breaking

capacity ICU of 35 KA. at 415 V. having Normal

current rating 200A.with variable Thermal &

magnetic release suitable to work on A.C.supply

c/s. with all internal connections, spreader tinned

copper & complete erected in existing

G.M.S.housing. ICS=100% of ICU only

[Approved Make - Schneider, L&T, ABB,

Siemens, Havells, MDS, C&S]

22 1 Providing and erecting Approved make Four pole 25228.79 No.

moulded case circuit breaker having breaking

capacity ICU of 50 KA and above at 415 V

having Normal current rating 400A. with variable

Thermal & magnetic release suitable to work on

A.C.supply 50 c/s. With all internal connections,

spreader tinned copper & complete erected in

existing 16 G.M.S. housing. ICS=100% of ICU

only [Approved Make - Schneider, L&T, ABB,

Siemens, Havells, MDS, C&S]

23a 1 Supplying and erecting triple pole & neutral 440V/ 660.54 Rmt.

500V panel mounting Aluminium Busbars with

four equal Nos. of bus having current density not

more than 0.8 Amp. / sq.mm (Rated current / cross

section area) duly wrapped with colour insulating

tape for phase sequence of following current

carrying capacity, erected with necessary bus bar

supports /insulators, main cable socket to each

busbar,erected in existing cubical panel with

necessary connections.(a) Suitable for 100 Amp.

23b 3 (b) Suitable for 200 Amp. Capacity 1037.27 Rmt.

23c 2 (c) Suitable for 400 Amp. Capacity 2204.83 Rmt.

24a 1 Supplying & erecting approved make Four Pole 7790.13 No.

415V change over switch interior for panel

mounting with operating mechanism A.C.23 duty

confirming to IS for (a)100-125A [Approved Make

- Schneider, L&T, ABB, Siemens, Havells, MDS,

24b 1 (b)400A [Approved Make - Schneider, L&T, 22255.35 No.

ABB, Siemens, Havells, MDS, C&S]

25 5 Providing & erecting weather proof, dust & vermin 14902.55 Sq.

proof, floor mounted front operated indoor type Mtr.

cubical panel board necessary IP-42 and above

protection as per approval from engineer incharge

made from 14 SWG thick CRC M.S. sheet for

outer body & doors, 16 SWG thick CRC M.S.sheet

for internal partitions with necessary accesories

supporting angles/ flats channel including cutting,

bending, drilling, welding, riveting with internal

partitions & cable alley as per requirements &

instruction of engineer-in-charge with erection of

supplied switch gears, BUSBARS, suitable size of

inter connecting PVC copper wire / copper-

aluminium strips, rubber grommets, rib, bakelite

control fuses/MCB for measuring instruments,

earth bus & earth bolts, foundation flange - bolts-

base Plates, sufficient nos. of hinged doors, handles

with locking arrangement and rubber gasket,heavy

duty end terminal connection,danger notice

board,necessary ventilation,earthing strip

complete. The Panel shall be painted with epoxy

powder coating. (The rates excludes the cost of

switchgears, bus bars, inter connecting mains &

Copper Aluminium strips, meters, Fuses etc. The

dimension shall be measured excluding base

beams) The panel shall be supplied with following

approved manufacturers with following size.(A)

The standard companies switch gear shall be used

and only manufacturers at CPRI approved factory

(i) with 350 mm depth [Make Approved By

Engineer in charge]

26 3 Supplying and erecting approved make panel 1275.63 No.

mounting type Digital Voltmeter having 3 digits

LED display, 0 to 750 AC Volts range erected on

existing panel board with all connection, wiring

etc .with manufacturers calibration

certificate.[Approved Make-Gelco, Meco,

Schneider, Siemens, Techno]

27 3 Supplying and erecting approved make panel 1558.43 No.

mounting type Digital Ammeter having 3 digits

LED display, external CT operated, calibrated for

to 1000 Amps suitable to operate on 500 Volt AC

erected on existing panel board with all

connection, wiring etc .with manufacturers

calibration certificate.[Approved Make-Gelco,

Meco, Schneider, Siemens, Techno]

28 9 Supplying and erecting approved make suitable 43.43 No.

panel indicator LED type lamp, lens cover,

complete erected with necessary connections.

29 1 Supply of Approved make Iron Clad or metal clad 12240.19 No.

four pole change over switch 415V. confirming to

IS of following capacity. (a) 100 A / 125 A

[Approved Make - Siemens, Schneider, L&T,

ABB, Havells, C&S]

30 1 Erection & connection charges for 63 A / 100A / 68.68 No.

125 A change over switch as following. (a)on

existing wooden block / A.I.frame

31 1 Providing Approved make Triple Pole Metal Clad 5812.55 No.

Switch Fuse Unit 415/500 V. with HRC fuse of

suitable load and neutral link confirming to IS. (a)

100 A/125 A Cat.III

32 1 Providing Approved make Triple Pole metal clad 13353.21 No.

switch fuse unit 415 / 500V. 400 A with HRC fuse

of suitable load and neutral link confirming to IS

[Approved Make - Havells, L&T, Crompton, C&S,

HPL, Indoasian]

33 1 Erection & connection charges for 32A/ 63 A / 100 73.73 No.

A HRC TPN as following. (a)on existing wooden

block / A.I.frame

34 1 Erection & connection Charges for 200A/ 250A/ 73.73 No.

300 A /325 A/400 A HRC TPN as following

(a) on existing wooden block / A.I. frame

35 8 Providing and erecting HOT deep Galvanised iron 77.77 Kg.

strip / wire 8 to 16 SWG.

36 2 Supplying & erecting earth pit of minimum bore 4591.46 No.

dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-

1987 made of corrosion free hot dipped G.I.Pipes

having Outer pipe dia of 50mm having 80-200

Micron galvanising, Inner pipe dia of 25 mm

having 200-250 Micron galvanising, connection

terminal dia of 12mm with constant ohmic value

surrounded by highly conductive compound with

high charge dissipation suitable for following type

of applications with chamber and heavy duty

cover. (A)(approved make OEM has to submit test

certificate including value of earth resistance of

installation duly stamped and signed by agency and

officer Incharge has to ensure the value of earthing

resistane mentioned in test Certificate) & having

back filling compound of (B) Inner chemical

(CCM Compound)- Resistivity:- 0.2 ohm / meter

testing as per IEC 62561-2017, Voltage drop:- <

volt at no load & dry form, Sulphar content:-

<2%(C) Back fill Compound :- Earthing

compound should be capable to retain moisture for

long time Necessary test report must be submitted

by Agency. .(a) For Electrical Installation up to

440V in normal soilLength of pipe - 1 MtrBack

filling compound - 1 Nos Bag of 15 Kg.[Make will

be approved by Engineer in Charge]

37 1 Supplying 3 Phase Isolation Transformer followed 126144.86 No.

by 3-Phase automatic digital microprocesser. based

servo control voltage stabilizer, air cooled, with

indoor enclosure with bottom cable entry with

MCB at input & contactor at output for tripping at

various fault condition. Stabilizer suitable for

unbalanced input voltage & unbalanced load.

Protection for over voltage, under voltage, over

load, short circuit & single phasing preventer. With

LCD display, with back light for displaying

input/output voltages & load current along with

fault/trip messages/Class-C surge protection device

included copper wound winding.Input:

320‐500/400V, 3‐Phase, 50 Hz, 3‐Wire + Earth,

Output: 400VAC+/-1%, 3‐phase, 4‐Wire + N +

Earth FOLLOWING Rating.(a) Rating 15 KVA

38a 6 Supplying and erecting LED street light / Flood 3345.12 No.

light fittings with High power White LEDs wattage

of 3 Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with

smooth finish powder coated and heat sink

extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass

with company mark/name engraved or embossed

160 to 270 V,Power Factor more than 0.95, THD <

10 %, CCT 3000 K to 5700K,Uniformity ratio

>0.45, Luminaire efficacy> 100 lumens/watt . LED

driver efficiency > 85 %.( fittings required LM-79

& LM-80 certificates)(NOTE: Below description

have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.) (A)

Street Light (IP-65), Surge protection -4KV

integral and ,Light must have 440VAC line supply

with over-voltage protection. (a) 48 watts

[Approved Make - Philips, Wipro, Crompton,

Havells, Surya, Bajaj, Orient]

38b 27 (B)Flood Light (IP-65), Surge protection -4KV 5599.44 No.

integral and ,Light must have 440VAC line supply

with over-voltage protection. (a) 60 Watts

[Approved Make - Philips, Wipro, Crompton,

Havells, Surya, Bajaj, Orient]

39 10 Supplying and erecting Flexible PVC insulated 46.46 Mtr.

multi strand multi core 1.1 kv grade ISI marked

copper wires of following size to be erected as

directed.(a) 1.50 Sq.mm 3 core round PVC

sheathed. [Approved make - Polycab, Havells,

RRKabel, Finolex, Anchor]

40 27 Supplying and erecting approved make Octagonal 6874.06 No.

pole made from HR sheet steel. The pole should be

made as per IS. and shall be coated with hot dip

galvanizing as per IS 2629/2633/4759, suitable

suspend local wind speed with integral Junction

box consist of terminal plate of min 6mm Hylam

sheet, standard profile 35mmX7.5mm Din-Rail for

MCB Mounting, stud type terminal and

arrangement for cable termination to be erected

With Suitable foundation (Included) as per details

given by manufacturer considering site

requirement. C) 5 Mtr. Long 70 mm Top X

mm bottom dia, 3 mm thickness with

200mmX200mmX12mm base plate, 4-M16 Bolts

and 600mm long with necessary G.I. J Bolts

.Approx Pole weight 46 kg [Approved Make-

Utkarsh, Bajaj, RR ISPAT, FAB, Crompton,

41 6 Supplying & erecting approved make SMC press 515.10 No.

moulded composite FRP. loop-in, loop-out approx.

2mm thick box complete with Bakelite connector

strip 5way(3P+N+E),DIN rail for mounting mob

& hinged doors as per requirement having locking

arrangements with mounting clamp with nuts, bolts

& washers suitable for erection on pole with cable

clamps& earth bolt of following size of box.(b)

250mm x 200mm x 100mm [deep] [Approved

Make - Sintex, National, EPP, Hensel, Green

42 27 Supplying and erecting Street light pole bracket 491.87 No.

comprising main B Class GI pipe of 4.2 cm/require

outside dia. complete with suitable B Class G.I.

sleeve tubing of approx. 45cms.length and suitable

for 76.5mm/80mm/require size of pole top having

nuts and bolts for fixing the brackets and having

spread of 0.5 mtr. Length with 110 deg.with

vertical plane and suitable welded stiffener reducer

and nipple with check nut complete painted with

one coat.of Red oxide / PU base primer and two

coats of Aluminium / PU paint. paint with

following nos of arms. [a] Single Arm bracket

Mtr. [Approved Make - Sintex, National, EPP,

Hensel, Green composites]

43 1 Supplying & erecting approved make Digital time 3168.37 No.

switch having lithium cell 6 years operative and

operate battery backup 1 channel day clock with

memory programme, suitable to operate on 240V +

5%, 16A with, floating contacts Minimum

switching setup time 1 minimum & LCD display.

Also comprised permanent ON/OFF switching.

Programming switches & housed in fire proof

thermoplastic enclosure & transparent cover

erected as required with necessary connection

erected as directed.[Approved Make - L&T, GIC,

Gelco, Ellico, Shneider, Selec, MDS]

44a 1 Supplying & erecting power contactor, AC3 duty 796.89 No.

for time switch complete erected as per direction

Cat-III (a) 2 Pole 250V 12 Amp.[Approved Make

- Schneider, L&T, ABB, Siemens, Havells, MDS,

44b 1 (b) 4 pole 440V 16 Amp.[Approved Make - 857.49 No.

Schneider, L&T, ABB, Siemens, Havells, MDS,

45 81 Providing and erecting ,Fabricating the box type 180.79 Kg

items made from M.S. Sheet with A.I. supports,

wings, doors, handles other hardware materials as

per requirement design with finishing by three tank

powder coating processed inside and outside

painted, erected as directed including minor civil

46 4 Excavating hard rock or bituminous road (B.T.) by 599.94 Cu.

chiselling or using tool and tackles for preparing Mtr

pit for poles or earth plates or for laying pipes &

clearing the site by removing debris & making site

47 100 Providing and erecting XLPE(IS:7098)(I)-88 ISI 79.79 Mtr.

armoured cable Aluminium conductor for 1.1 KV.

to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables.

(A) 2 core 4 Sq. mm

48a 500 Providing and erecting XLPE (IS:7098)(I)-88 ISI 126.25 Mtr.

armoured cable multistrand / Solid Aluminium

conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe of

following size of cables. (a) 4 core 6 Sq. mm

[Approved Make - Avocab, Havells, Finolex,

RRKabel, L&T, Polycab]

48b 600 (b) 4 core 10 Sq. mm [Approved Make - Avocab, 140.39 Mtr.

Havells, Finolex, RRKabel, L&T, Polycab]

49 100 Providing and erecting XLPE (IS:7098)(I)-88 ISI 153.52 Mtr

armoured cable multistrand Aluminium conductor

for 1.1 KV. to be laid on wall with necessary

clamps or in existing trench / pipe of following

size of cables(A) 4 core 16 Sq. mm. [Approved

Make - Avocab, Havells, Finolex, RRKabel, L&T,

50a 120 Providing and erecting XLPE(IS:7098)(I)-88 ISI 183.82 Mtr

armoured cable multistrand Aluminium conductor

for 1.1 KV. to be laid on wall with necessary

clamps or in existing trench / pipe of following

size of cables (A) 3 1/2 core 25 Sq. mm ( 16 Sq.

mm 1/2 core) [Approved Make - Avocab,

Havells, Finolex, RRKabel, L&T, Polycab]

50b 80 (b) 3 1/2 core 35 Sq. mm ( 16 Sq. mm 1/2 core) 220.18 Mtr.

[Approved Make - Avocab, Havells, Finolex,

RRKabel, L&T, Polycab]

51a 24 Providing and, fixing heavy duty flange type brass 38.38 No.

cable gland with rubber ring for PVC insulated

armoured cable complete with out going tails,

insulating tape etc for following size of cables. (a)

2 to 4 core 6 Sq. mm

51b 2 (b) 2 to 4 core 10 Sq. mm 38.38 No.

51c 8 ( c ) 2 to4 core 16sqmm 47.47 No.

52a 8 Providing and, fixing heavy duty flange type brass 66.66 No.

double compression type cable gland with rubber

ring for PVC insulated armoured cable complete

with out going tails, insulating tape etc for

following size of cables.(A) 3 & 1/2 / 4 core 25 Sq.

53a 56 Solder less crimping type Aluminium lugs 6.06 No.

conforming to IS suitable for cable of following

size evenly crimped with high pressure tool &

connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved

manner. (a) 1.5/ 2.5/4/6 Sq.mm

54 900 Providing & laying approved make Double walled 62.62 Mtr.

corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with

necessary connecting accessories of same material

at required depth in existing trench for laying of

cable. below ground / road surface for enclosing

cable . (a)50 mm outer dia. [Approved Make -

Veronica, Dutron, Rex, Gemini, Duraline]

55 900 Making trench in Hard Murrum / Tar Road of 74.74 Mtr.

suitable width of 90 cm or required depth for

laying any size of cable or locating the fault all

over the run and back filling the same and making

the surface as normal ground.

56 6 Supplying and erecting B class galvanised iron 343.40 No

pipe 32 mm outside dia 45 cm long duly welded on

20 cm x 20 cm x 3 mm thick M.S. base plate,

erected on wall or corner for mounting street light

luminaire with necessary hardware materials duly

Total without GST ₹

*All Rates are Exclusive of GST

I/We am/are willing to carry out the work at…………………….% above/below

percent(Should be written in figures and words) of the estimated rate mentioned above.

Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct……………% below Add……………….…% Above

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the

Engineer-In-Charge and as per GR No. MIS/102010/17(2)/k-1 of dtd. 29/01/2011 for which no extra

payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills.

4. Rates quoted include clearance of site (prior commencement of work and at its close) in all respects and

hold good for work under all conditions, site, moisture, weather etc.

5. The quoted rates should be inclusive of cost of minor rectification work which may have to be done for

correcting the distoration caused during transportation of the gate components.