ADDITION ALETRATION TO MAIN SECURITY GATE AT INF LINE AND SPL REPAIRS TO ROOF OF BLD NO T-32 SHUTTER OF T 46 AND T 102 AND CHAIN LINK FENCING AT BG LINE JAMNAGAR

Amount

Demolition of Brick Work built in Cement Mortar including all Quoins, Arches, Pillars, etc. of any descriptions, keep Serviceable Bricks in Safe Custody for re-use, complete all as specified and as directed.

M&L for Brick Work with Sub-Class ‘B’ Bricks (with Old Size Bricks), Straight or Curved on Plan exc. 6.0 meter mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed.

Demolition of cement Concrete of any description and in any position not otherwise specifically provided for

M & L for cement concrete 1:2:4 type B2 (40mm graded aggregate) in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases)

Taking down cement plaster on brick/ stone wall built in cement mortar or on concrete surface at any position & any description including racking out joints, hacking for key scrubbing down with water etc. complete all as specified & directed.

M&L 15 mm thick rendering in two layers of 10mm in CM 1:6 & top layer of 5 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces incl finished even and smooth w/o using extra cement all as specified.

M&L 10 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces finished fair and even.

M&L for preparation of new plastered and unplastered or concrete surfaces and applying three coat of white wash all as specified

M&L for preparation of surfaces plastered or unplastered new surfaces on walls and applying two coats of cement base paint complete all as specified and as directed.

M & L for preparing old decorated plastered surfaces on walls and applying one coat of white wash, complete all as specified and as directed.

M & L for preparing old decorated plastered surfaces of walls and applying one coat of cement based paint, complete all as specified and as directed.

Dismantling Timber Scantlings, 40 Sqcm and over in Section, in any Position, in Unframed Work, complete all as specified and as directed.

M&L for Second Class Hardwood in Scantling, Clean swan, fixed as in Unframed Work with Nails in any position, complete all as specified and as directed.

M&L for preparing surfaces of wood and wood based materials new or old and treated with two coats creosote of any description and girth not otherwise described , complete all as specified and as directed

Dismantling of AC /CGI/aluminium sheets in roof, cladding including ridges etc.,

High tensile galvalume sheets colour coated single skin high rib / multi rib TMP Profile Galvalume sheeting in roof having 1000-1020 mm width 28 mm high crest @ maximum 250 mm pitch (centre to centre) and minimum 190mm manufactured out of 0.50 mm TCT (total coated thickness) cold rolled steel, having yield strength 550MPa minimum and wall coated with 25 micron modified polyester paint system applied on Zincalume on top and with back coating on sheet shall be 7-10 micron epoxy paint. The sheet shall be supplied in length maximum upto 6-12 meters long to suit with structural dimensions and fixed with self tapping screws with built in gasket (with bitumen washer) of suitable size machine fixed as per manufacturer instructions and applying adhesive compound to joint overlap of sheets complete all as specified and directed by Engineer-in-Charge.

High tensile galvalume sheets colour coated single skin plain Galvalume sheeting in ridge and cladding having 1000-1020 mm width manufactured out of 0.50 mm TCT (total coated thickness) cold rolled steel, having yield strength 550MPa minimum and wall coated with 25 micron modified polyester paint system applied on Zincalume on top and with back coating on sheet shall be 7-10 micron epoxy paint. The sheet shall be supplied in length maximum upto 6-12 meters long to suit with structural dimensions and fixed with self tapping screws with built in gasket (with bitumen washer) of suitable size machine fixed as per manufacturer instructions and applying adhesive compound to joint overlap of sheets complete all as specified and directed by Engineer-in-Charge.

Demolition of RCC in any description and in any position not other wide specifically provided reinforced (reinforcement of cut as required to facilitate demolition etc) incl removal of demolished materials out side of MD land complete all as specified and directed.

M&L for cement concrete 1:2:4 (40mm graded stone aggregate) 100mm thick in floors,finished cement surfaces even and smooth with out using extra cement complete all as specified.

Use and waste of formwork to sides of columns with rough finished surfaces of concrete in square, rectangular or polygonal.

Use and waste of formwork to sides and soffits of floor or roof beams, beams with fair finished surfaces of concrete in flat.

Use and waste of formwork to chullah hoods, chajjas, troughs & similar items including edges with rough, finished surfaces of concrete in flat

M&L RCC 1:1.5:3 type A1 using 20mm graded aggregate Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilaster and buttresses ,complete all as specified and as directed.

M&L RCC 1:1.5:3 type A1 using 20mm graded aggregate as in lintel,beams , complete all as specified and as directed

M&L RCC 1:1.5:3 type A1 using 20mm graded aggregate as in chajjas , complete all as specified and as directed

M & L for mild steel TMT deformed or twisted bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia as in reinforcement of fencing posts,colums,plinth beams in fencing all as specified & directed.

S & F mild steelTMT deformed or twisted bars, 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders.cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with & including MS wire (annealed) not less than 0.9mm dia or securing with clips.

Fixing only Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. complete all as specified and as directed.

Taking down steel gate each leaf size exc. 1.5 Sqm but n. exc. 4 Sqm with bed blocks, pintel hinges & hold fasts, rectifying the defects such as straightening, welding etc and refixing in position with provision of bed blocks, new/old pintel hinges and hold fasts.as required all as specified and directed. .

Taking down and refixing only Steel rolling shutters after aligning greasing and servicing complete all as specified and directed

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground

Dismantling fencing wire mesh any type

Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil all as specified and directed.

Excavating in post holes (or similar holes) in hard dense soil each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,watering and removing surplus sol to a distance n exc 50m and making good surface

M&L PCC (1:3:6) nominal mix type C-2 (using 40 mm grade aggregate) as in foundations, fillings and mass Concrete complete all as specified as directed.

M & L for providing precast reinforced cement concrete 1:1.5:3 type A1 using (20mm graded stone aggregate) in precast post,fencing post,straining or terminal post,struts etc for fencing,average sectional area exc 100 and n exc 250 sqm with or without chamfered angles and flat ,splayed,rounded or mitred tops as direct and fixed all as specified and as directed

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire. Note-MS Flat & MS bar to be measured and paid separately

supply only chain link fencing made out of 4mm dia galvanised iron wire of mesh 75mm x 75mm size, complete all as specified and as directed

M & L MS round bars 10mm dia conferming to Fe-410W or Fe310 fixed independently i, including , hooking ends fixing chain link fencing as in bearing bars and binding with and including mild steel wire (annealed) not less than 0.9mm dia of securing with clips complete all as specified & directed.

S & F Mild steel works with angle iron,flat iron etc as in posts,struts in fencing incl cutting tops to shape as directed, drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc) including all necessary drilling,bolting or riveting etc and similar work confirming to Fe-290 Gde E-165.

S & F in repairs Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)

S & F 6 to12mm dia MS bolt made) of length exc 10cm but not exc 15cm with one washer and one nut all as specified & directed.

M&L for preparation surfaces of any description n exc 10 cm width or girth and applying two coats of aluminium paint over a coat of red oxide(Zinc chrome) including preparation of surfaces

M&L for preparation of new steel and iron surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and as directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. Or for shafts, wells, cesspits,manholes, pier holes, etc. N exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil.

M&L for providing plain Cement concrete 1:4:8 type D2 using 40 mm graded aggregate as in foundations, filling and mass concrete

M&L for providing Reinforced cement concrete (Nominal Mix) Type B1 1:2:4 (20mm graded aggregates) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for fair finished surfaces of flat area.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.

Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed

S&F MS Framed work such as grills, gratings, etc.. with ends of bars/sections shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 or of any other section including ornamental CI items for portions framed and hung as gates, including pintel hinges, stops, hand-made sliding bolts, etc.

M&L Pre cast cement concrete block type C1 in 1:3:6 Using 20 mm graded stone aggregate exc 10 CM in width and setting in CM 1;6 all as specified and directed.

M&L 20 mm thick rendering in two layers of 10mm on external concrete wall surfaces in cement plaster 1:4 with WPC incl finished even and smooth w/o using extra cement all as specified.

M&L 20-25 mm thick red stone cladding on boundary wall dholpur red stone with chemical and S.S fastner and clamp including necessary cement work and finishing work completed all as specified and directed.

M&L red/pink stone chatri with carving and intricate design ht 2.5' x 1.5' with chemical and S.S fastner and clamp including necessary cement work and finishing work complete all as shown in sketch all as specified and directed.

VINUBHAI P. CHANDRA

jitendra c joisar