PROVN OF AUTOMATIC FIRE DETECTION SYSTEM IN PETROLIUM OIL AND LUBRICANT AND PAINT STORE AT INS VISWAKARMA AND CERTAIN E/M MINOR AND REVENUE WORKS FOR PROVN OF SPLIT ACs GEYSER SIREN AND PROVN OF 3 EMERGENCY LADDER AT NAVY CHILDREN SCHOOL SVN COLONY

Amount

SCHEDULE 'A' PART-I:E/M WORKS

Supplying, installing testing and commissioning of the 01-loop analogue addressable control panels, Extendable from 01 to 01 loop circuits, and with up to 240 devices per loop, the control panels' compact styling and programming power makes it ideal for all small and medium site requirements. The large graphical display with easy to navigate menus provide fast and simple setup and maintenance. Panels support the range of Apollo/ Soteria/Honeywell protocol devices including their range of wireless accessories and soteria devices. The panels are supplied with a 3.4Amp internal switch mode power supply module. Panels are approved to European standards; EN54-2 & EN54-4. complete all as specified and as directed and consisting of the following terms and conditions :-

Notes:[a] The rate quoted shall also deemed to include for the following provisions also:-[i] Supply and installation of Batteries 12v 18/07Ah- 02 Nos[ii] Supply and installation of 24 volt Fault Torrent Network card with built in diagnostics and is fully monitored for both short and open circuit faults between nodes installed in fire alarm panel with maximum 200 Network nodes. [iii] Installation, commisioning and testing by OEM and submission of satisfactory test report on completion testing of whole system.[iv] The contractor shall provide proper Demo of the whole system on complete installation and shall provide 2 years Manufacturer/OEM warranty certificate for smooth functioning of complete system.Make: Apollo / Cooper / Notifier / Honeywell.

Supply, Installation, testing and commissioning of GSM communicator for converting the PSTN Ademco PSTN Contact ID codes of the fire alarm panels to readable SMS notifications and SIA - 09 IP over GPRS network to central monitoring station (CMS) and connecting to Fire detection and alarm system complete all as specified and as directed with following terms and conditions :- [a] GSM Module with 4G GSM version of 2G QUAD BAND (850/900/1800/1900 MHz).[b] Direct mount Antenna with SMA Male L-Type Connector-CDMA and WCDMA, 2.5 dBi Gain and 850-2100/2400 MHz[c] IP communicator for fire alarm control panels,[d] Supports full transmission Contact ID over IP SIA-DC09 event information to security monitoring station.

[e] 4/8 General alarm inputs including power supply voltage monitoring via SMS message, 800 remote control users via free short call[f] 800 users control by GSM call or using Maxim- Dallas i-Button keys,[g] Configuration using standard mini-USB cable.[h] Remote configuration and firmware upgrade,[j] Testing and diagnostic of the module via USB by using program SOFTWARE with features for troubleshooting and testing of the module via USB PC for saving time for installer and allow real time monitoring of module parameters, input/output and GSM modem status (IMEI, SIM registration) etc.[k] Shall Support up to 32 temperature sensors or 1 humidity/temperature sensor for automation purposes such as HVAC temperature control, alarm and control with extra sensor.(l)Free configuration and diagnostic software,[m] Free android APP and WEB cloud service with Software for Mobile/Tab's/PC's - 1 Set with each Panel[n] Central Alarm Monitoring at security through cloud-based software (With out end receiver) with PC/TAB/Mobile [Cost of PC/TAB/Mobile shall not be included in the rate quoted for this item].

Notes:[a] The rate quoted shall also deemed to include for the following provisions also:-[i] Installation, commisioning and testing by OEM and submission of satisfactory test report on completion testing of whole system.[ii] The contractor shall provide proper Demo of the whole system on complete installation and shall provide 2 years Manufacturer/OEM warranty certificate for smooth functioning of complete system.Make: Apollo / Cooper / Notifier / Honeywell.

Supplying, installing and testing of Multisensor Detector with self built intelligence Complying with and type certified to EN 54 and conforming to IS – 11360 comprising of optical smoke and thermistor temperature sensors to give both combined signal as well as a separate heat signal for improved false along with isolator modules as required, provided as per area requirement below or above the false ceiling complete all as specified and as directed with following terms and conditions:- [a] Communications protocol: Honeywell/ Notifier/ Apollo/ Series 90/ XP95 5-9V peak to peak[b] Operating voltage: 17-28V DC[c] Quiescent current: 500μA peak[d] Power-up surge current: 1mA[e] Maximum power-up time: 10s[f] Alarm LED current: 3.5mA[g] Remote LED current: 4mA at 5V (measured across remote load)

[h] Clean air analogue value: 23 +4/-0[i] Alarm level analogue value: 55[j] Alarm indicator: 2 colourless Light Emitting Diodes (LEDs); illuminated red in alarm Optional remote LED[k] Dimensions:100mm diameter 50mm height 58mm (height in base)[l] Weight: Detector: 105g Detector in base: 160g[m] Materials: Housing: White polycarbonate V-0 rated to UL94[n] Terminals: Nickel plated stainless steel[n] Smoke element only: Chamber configuration: Horizontal optical bench housing infra-red emitter and sensor, arranged radially to detect forward scattered light[o] Sensor: Silicon PIN photo-diodeMake: Apollo / Cooper / Notifier / HoneywellNote: The rate quoted shall also deemed to include for 5 years on site replacement warranty for complete system and providing OEM warranty certificate and minimum 5 years SIM recharge for networking/communication & validity for complete system.

Supply and installation of UV Flame Detector with air Purging provision, Flickering LED indication for normal operation 24V DC, 4 Wire system with IHMB01XY complete all as specified and as directed.

Supply & Installation and Commissioning of Short circuit isolator module to be installed between every 20 nos. of devices to isolate the circuit from single short circuit on the analogue addressable loop cable, this is non addressable device with yellow LED for status indications, including all accessries all as specified and directed by Engr-in-Charge

Supplying, fixing and testing of Addressable dual action manual call point/ pull station, resettable type, having integrally mounted addressable module to monitor and report contact status complying with latest standards and is designed to interface with DIP switches of Metal body with anti-corrosive coated, with hex Key including all accessories complete all as specified and as directed.

Supplying, installing and testing of Addressable electronic loop sounder cum strobe with xenon flash tube duly integrated with In-built UL listed Isolator/ control Module with supervisory features and power supply inputs including all accessories, flush/ ceiling mounted type with box complete all as specified and as directed.

Supplying and fixing of stove enamelled rigid steel Conduit, 25 mm dia including all accessories, fixed to walls/ ceilings complete all as specified and as directed.

Supply, laying & testing PVC insulated, PVC sheathed cable galvanized steel strip or wire armoured, electric control cables (Heavy duty) with stranded copper conductor of size 1.5 sq mm ,2 core, 1100 Volt Grade

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 1.0 KVA

Material and labour for point wiring with 1.5 Sqmm PVC insulated and unsheathed copper cable 1100V, FRLS grade multistranded drawn in and including 25mm surface stove enamel steel conduit in walls/ceiling with tee, bend, elbows,junction box etc. with provision of PVC insulated 2.5 sqmm copper conductor cable as earth continuity suitable for flame proof switches, sockets regulator and connected the earth wire to common earth dolly for One light point/fan point controlled by one switch complete all as specified and as directed.

Material and labour for Switch socket combination 2 in 1, 3 pin, 6 and 16 Amp Modular type

M&L for sub main wiring with two run of 2.5 Sq. mm PVC un-sheathed, copper conductor cable, 1100 Volt, and one run of copper earth wire 2.5 Sq mm drawn through PVC surface/concealed of 25 mm dia, including taking down unsv sub main wiring of any type, complete all as specified and as directed by Engr-in-Charge. Note: Copper conductor 2 run and one run of copper earth wire along with PVC concealed conduict shall be measured as one length & Cutting of chases/walls and making good the disturbed surface are included in the quoted rate.

S & F Modular Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20A rating complete all as specified and as directed.

Supply and fix Water heater storage type, electric,capacity 25 litres, copper storage tank, BEE 5 star rated 2KW capacity including Hot and cold heavy duty pipes, complete installation, testing and commissioning all as specified and as directed by Engg-In Charge.

Supply and fixing of MCB 20 Amp, 240 Volt, SP, breaking capacity 10 KA 'C' series, complete all as specified

Supply and lay pipe galvanized, “Medium class”, including fittings 20 mm (3/4”) dia and all accessories complete all as specified and directed.

S & F Gate Valve 20mm complete all as specified and directed by Engr-in-Charge.

Supply and fix Valve, stop, screwed,15 mm (1/2”) dia pipe complete all as specified and directed.

S & F Brass CP mixer for mixing hot & cold water screwed down for iron pipe of 15mm dia complete all as specified and directed.

S & F Cock, bib, brass, screwed down For size 15 mm (1/2”) dia pipe complete all as specified and directed.

Material and labour for point wiring with 4.0 Sqmm PVC insulated and unsheathed copper cable 1100V, FRLS grade multistranded drawn in and including 20mm PVC conduit totally concealed in walls/ceiling with tee, bend, elbows,junction box etc. with provision of PVC insulated 4.0 sqmm copper conductor cable as earth continuity including 2.0mm thick prefabricated galvanised boxes with white modular cover plate of suitable size for fixing 15/16 Amps modular switch socket outlet and connected the earth wire to common earth dolly for 15/16 Amps Socket point controlled by one switch complete all as specified and as directed. Note:-(i) All the disturbed surfaces of wall / ceiling shall be made good to match the existing wall / ceiling finishes and the rate also include all the cutting, chasing and cementing work and as directed by the Engineer-in-Charge.

Supply and lay PP-R pipe including fittings 20 mm (3/4”) dia and all accessories complete all as specified and directed.

M & L for cutting to existing GI / PP-R Pipeline upto 25mm dia for taking connection upto 15/20mm dia GI Pipe including insertion of Tee complete all as specified and directed.

Supply, install, testing and commissioning of hi wall split inverter type units indoor/outdoor complete with cordless remote control unit and copper winding compressor, copper condensor for better indoor air quality with minimum 5 star rating and EER 3.2 of capacity 1.5 TR complete all as specified and directed by the Engineer-in-Charge.

Supply, install, testing and commissioning of hi wall split inverter type units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter, copper winding compressor, copper condensor for better indoor air quality with minimum 5 star rating and EER 3.2 of capacity 2.0 TR complete all as specified and directed by the Engineer-in-Charge.

M & L for sub main wiring with two run of 4.0 Sq. mm PVC un-sheathed, copper conductor cable, 1100 Volt, and one run of copper earth wire 4.0 Sq mm drawn through PVC concealed conduit of 25 mm dia, complete all as specified and specified. Note: Copper conductor 2 run and one run of copper earth wire along with PVC concealed conduict shall be measured as one length & Cutting of chases/walls and making good the disturbed surface are included in the rate.

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 4 KVA complete all as specified and directed by the Engineer-in-Charge.

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5 KVA complete all as specified and directed by the Engineer-in-Charge.

M&L for sub main wiring with five run of 4.0 Sq. mm PVC un-sheathed, copper conductor cable, 1100 Volt, and one run of copper earth wire 4.0 Sq mm drawn through PVC casing caping of 25 mm , complete all as specified and directed by Engr in Charge.

Supply installation & testing of Fire Alarm Sounders / Sirens Electronic type 3500m range horizontal single stage continous normal operation for atleast 50 minutes with sound level 65 DB to 120 DB measured at 1.5 Mtr with sound output variation of + 5 DB including galvalum sheet to cover siren all as specified and directed by Engr in charge.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting any type etc. and removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

S & F in Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V, complete all as specified and directed.

Supply and Fixing of Flameproof cum Waterproof LED Bulk Head light fitting of 40W, IP66 protection of Cast Aluminum alloy material and Heat and Impact resistance toughen 'A' clear glass having Anti corrosive epoxy powder coated finish omplete with all accessories pre wired and including connecting up with three core flexible copper conductor cable with suitable size. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size, complete all as specified and directed.

Supply and fix flame proof exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers including making suitable hole for fixing Exhaust fan complete all as specified and directed.

Supply and fixing of Factory made sheet metal enclosure for DBs (Fixed flush to the wall), SPN, 240 volt, 8Way, DD, IP-42 protection with 100 Amp rated bus bar and 1.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s , complete all as specified and as directed.

Supply and fixing of MCB 6 to 32Amp, 240 Volt, SPN, breaking capacity 10 KA 'C' series, complete all as specified and as directed.

Supply lay and testing of cable in trenches/walls XLPE insulated, armoured electric cable (heavy duty 1100volt grade with stranded aluminium conductor of size 25sqmm 4.0 core complete all as specified and directed by Engr-in-charge.

Excavation in trenches not exc.1.5m wide and not exceeding 1.5m in depth and getting out in hard/dense soil for laying of cable complete all as specified.

Returning, filling in, including spreading, levelling, watering and well ramming in layer not exceeding 25 cm thick complete all as specified

Removing excavated surplus soils meterial not exc.50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified.

Material and labour for natural river sand as cushioning of cables, including spreading and punning down complete all as specified and directed by Engineer in charge. Note : punned thickness shall be measured for payment purpose

Supply and laying in trenches old size bricks common burnt clay sub class 'B' complete all as specified & directed

Material and labour for 50 mm dia GI steel tubes 'light grade' for cable protection including sealing both ends complete all as specified and as directed by Engineer-in-charge.

Material and labour for cutting existing road/PCC/drain for laying of underground cable and including necessary earth work and making good to match with the exisitng surface with PCC1:3:6 type CI using 20mm graded aggregates complete all as specified and as directed.

SCHEDULE 'A' PART-II:B/R WORKS

Excavation in post holes in soft/loose soil each n.exc 0.5 cum getting out returning,filling in and ramming earth or broken rubble mixed with earth around in layer n exc 25 cm, watering and removing surplus soil to a distance n.exc 50mtr and making good surface all as directed.

Removing Excavated soils not exceeding 50 M and depositing where directed at a level not exceeding 1.5 M above the starting point.

S&F structural steel for posts and struts in framed work including cutting tops to shape as directed,drilling holes etc.

Rolled mild steel work as in Stairs [framed] including stringers, treades, landing, balusters, hand rails etc. including cleats, brackets, etc. of Fe 410 -W (Gde-E- 250) quality-A Fe complete upto 2nd floor all as specified and as directed.

S & F rolled mild plates (plain or chequered) channels, square cut or notched, forming holes with riveted, bolted or welded attachment conforming to Fe 290 Gde E-165.

S & F Mild steel flats (40x6mm thick) for hand rails, wind ties, posts and struts in fencing screwed or welded to shape as directed, including all necessary drilling, bolting or riveting etc., and similar work confirming to Fe 410 - O or Fe 310 - O

M&L for cement concrete Type B2 1:2:4 (40mm graded aggregate) in foundations, filling and mass concrete.

M&L for 75 mm thick PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) for sub base of flooring /hard standing including finishing the surface even and rough to receive the topping layer.

M & L Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade

M&L for sand cushioning including watering for Interlocking tiles complete all as specified and as directed.

S&F for collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete

Preparation of newly untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxied priming.

Demolition of reinforcement cement concrete as in parapet wall complete all as specified and directed.

MVV Prasad (BID ID -3291503)

MURALI KRISHNA ASSOCIATES (BID ID -3288219)

SHIKHARA PROJECTS (BID ID -3288222)