Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.6 LAccepted-Finance | ₹1.6 L | L1 | Accepted-Finance L1 |
| 2 | L2₹1.6 L+₹1,678.35 (1.08%)Accepted-Finance | ₹1.6 L+₹1,678.35 (1.08%) | L2 | Accepted-Finance L2 |
| Sl No | Description | Qty | Unit | T SASI L1 | ARUN KUMAR A S L2 |
|---|---|---|---|---|---|
| 1.00Maintenance | |||||
| 1.00 | OD89311/2026-2027:providing and fixing pre coat galvanised iron profille sheets(size,shape and pitch of corrugation
as approved by Engineer-in-charge)0.35mm(+0.05%),total coated thickness with zinc coating
120 grams per sqm as parts is.277,m 240 mpa steel grace,5-7 microns epoxy primer on
bothside.of the sheet and polyester top coat 15-18 microns.sheet should have protective guard
film of 25 microns minimum to avoid scratches during transportation and should be supplied in
single length upto 12 metre or as desired by E ngineer-in-charges .The sheet shall be fixed
using self drilling/ self tapping srews of size(5.5*55mm) with EDPM seal,complete upto any
pitch in horizontal/vertical or curved surfaces,excluding the cost purlins,rafters and trusses and
including cutting to size and shape wherever required | 109.03 | sqm | 564 ₹61,494.05 Lowest | 570.4 ₹62,191.85 |
| 1.00 | 12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm) | 22.4 | metre | 531 ₹11,894.4 Lowest | 537.17 ₹12,032.61 |
| 1.00 | 10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 197.95 | kilogram | 110 ₹21,774.28 Lowest | 110.93 ₹21,958.37 |
| 1.00 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | 313.2 | kg | 182.7 ₹57,221.64 Lowest | 184.69 ₹57,844.91 |
| 1.00 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 0.29 | cum | 8,690 ₹2,502.72 Lowest | 8,780.33 ₹2,528.74 |
| 1.01 | 4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns | 2.88 | sqm | 364 ₹1,048.32 Lowest | 367.11 ₹1,057.28 |
Tender Value
₹1.7 L
EMD Value
₹4,237
Closing Date
27 Jul 2026, 6:00 pmClosed
Assistant Engineer
Office of the Assistant Engineer LID_EW Karode G P
Building maintenance
2026_LSGD_861233_1
AE/KRD/10/TEND/2026-27
Open Tender
Civil Works - Buildings
Item Rate
Karode grama panchayat
Please refer Tender documents.
10 documents required · 10 mandatory
₹555
Yes
₹4,237
Yes
21 Aug 2026
18 Jul 2026
29 Jul 2026
18 Jul 2026
27 Jul 2026
18 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Maintenance | |||||
| 1.001 | OD89311/2026-2027:providing and fixing pre coat galvanised iron profille sheets(size,shape and pitch of corrugation
as approved by Engineer-in-charge)0.35mm(+0.05%),total coated thickness with zinc coating
120 grams per sqm as parts is.277,m 240 mpa steel grace,5-7 microns epoxy primer on
bothside.of the sheet and polyester top coat 15-18 microns.sheet should have protective guard
film of 25 microns minimum to avoid scratches during transportation and should be supplied in
single length upto 12 metre or as desired by E ngineer-in-charges .The sheet shall be fixed
using self drilling/ self tapping srews of size(5.5*55mm) with EDPM seal,complete upto any
pitch in horizontal/vertical or curved surfaces,excluding the cost purlins,rafters and trusses and
including cutting to size and shape wherever required | 0.8 | sqm | - | - |
| 1.002 | 12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm) | 1 | metre | - | - |
| 1.003 | 10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 0.2 | kilogram | - | - |
| 1.004 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | 1 | kg | - | - |
| 1.005 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | - | cum | - | - |
| 1.006 | 4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns | 1 | sqm | - | - |
stage.html
html • 0.03 MB
tech_eval.pdf
fin_eval.pdf
finance_1456463.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.05 MB
SBD137.pdf
Tender Documents • 3.74 MB
BOQ_1456463.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .