82/EUDC-II/2023-24

Amount

Part-A

Safe loading carriage including unloading and proper stacking of following materials from Central Store, Lucknow / JE Store to site of work.

ST Pole 11 M long

LT ABC 3x120+1x95+1x16 sq. mm

LT Cable 1x240 sq. mm

ACSR Rabbit/Weasel Condutor

Transformer 250 KVA

11 KV XLPE Cable 3x120/185

Line Material

Erection, Grouting , plinthing of Substation type double pole with ST Pole 11 M long including mounting of Top Channel, Dropper Channel, base angle with clamps and nut and bolts As per RESSPO norms (Only Poles shall be supplied by deptt.)

Fabrication, erection of single 11 mtr long STpole with fixing of Cross Arm and necessary clamps required including digging of pit and fixing of all accessories as per RESPO Norms. Cost of clamps borne by contractor .

Stringing & Sagging of ABC of 3x120 + 1x95+1x16 mm on erected single PCC pole including mounting of Clamps and connectors like Suspension clamp, Dead end with Eye Hook. (Only ABC will be provided by the department)

Grouting & Concereating STPole 11 Mtr Long as per Respo Norms

Laying of ACSR Rabbit Conductor as Per RESSPO Norms

Laying of 11 KV 3x70/120mm XLPE Cable in Single Circuit underground manual method Approximate 1Mtr Depth including digging of Trench Cutting of Road with Laying of as per agreement Nroms

Laying of Catanory Type Cable

Transformer 250 KVA

Construction of Transformer Plinth of size 2x2x1.5 Mtr with the help of first class bricks, coarse, sand and cement all the material supply by contractor.

Febrication and errection of fencing made of MS angle 40x40x5 mm and Ractangular wiremess around the Plinth (For 400 KVA).

Construction of Messanary Distribution Piller Box (T/F 250/400 KVA)

Pipe Type earthing with 20mtr deep boring and providing G.I. pipe 1.5 dia (20mtr G.I.pipe ) of tata jindal make and GI Strip 25x5mmx6 mtr long attached with clamps L Nut bolts and GI pipe All material shall be supplyed by the contractor

Hoisting of 11KV 3x185 Sq. mm XLPE cable on double pole with proper clamping & jumpering. The cable will be passed through MS pipe of size 200 mm dia & pipe will be clamped with pole at the bottom, middle & top of the MS pipe (All the material will be arranged by the contractor except cable.)

Earthing of Poles with M.S. earthing Rod

Providing & Fixing of 11 KV TPMO Set

L Piece

Supply & Errection of D.O. Fuse set

Making of Circuit

Dropper Channel

Top Channel

Providing & Fixing of Lug 250/400 sqmm

Other Petty works

Part-B

Maintenance of 11 KV RMU Cleaning of dust, spider web, foreign particles etc, Cleaning of all part with cleaning agents such as CRC-226, Check the tightness of all hardware, Regressing as recommended, general checking of ON/OFF Operation by manual and Electrical, General check-up of Relay, Magger testing, Lubricating the operating mechanism setting and adjustment, General check-up. Control circuit and operational test, Relay trip test checking & Complete testing of RMU, Insulation Resistance Test, Replacement of spares if required and Gas Re-filling if required.

Maintenance of Different Make 11 KV RMU

Cartage including loading unloading & Proper Stacking of RMUs from Working site to Company site & Company site to Working Site (If Required)

Supply of Spares parts for Different make 11 KV RMU

Closing Coil

Trip Coil

RMU Bushing

Over Current Earth fault Relay

Cable Boot

SF6 Gas

Hindustan Electric Work