Kerala

Active

Works

Civil Works - Buildings

VAZHATHOPE GRAMA PANCHAYATH 2026 27 - PROJECT NUMBER 84/27-MAINTENANCE OF MANIYARANKUDY MUSLIMPALLI ANGANAWADI IN WARD 7

Local Self Government Department

Vazhathope | Idukki, Kerala

Amount: ₹2.1 LCloses: 23 Oct 20264d left

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published14 Oct 2026
Closes23 Oct 2026
Bid Opening24 Oct 2026

Tender Value

₹2.1 L

EMD Value

₹5,285

Closing Date

23 Oct 2026, 1:00 pm4d left

Tender Inviting Organisation

Name

Assistant Engineer

Address

LID EW Section Vazhathope

Work Description

VAZHATHOPE GRAMA PANCHAYATH 2026 27 - PROJECT NUMBER 84/27-MAINTENANCE OF MANIYARANKUDY MUSLIMPALLI ANGANAWADI IN WARD 7

Tender Information

Tender ID

2026_LSGD_878047_1

Reference Number

LSGD/CELSGD/34746/2026-2027

Tender Type

Open Tender

Product Category

Civil Works - Buildings

Form of Contract

Percentage

Location

Vazhathope

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

7 documents required · 7 mandatory

Fee/PreQual/Technical/Finance

RequiredBid submission letter as per item no-1 Part-VI (.pdf)

RequiredIntegrity pact certificate as per item no-3 PartVI (.pdf)

RequiredPreliminary agreement as per item no-2 PartVI (.pdf)

RequiredRequisition for e-payment as per item no-6 PartVI (.pdf)

RequiredAffidavit as per item no-4 Part- VI (.pdf)

RequiredBid documents with NIT (.pdf)

RequiredBoQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹555

EMD Fee Amount

₹5,285

Important Dates

Last Activity

14 Oct 2026

Published

14 Oct 2026

Bid Opening

24 Oct 2026

Download Starts

14 Oct 2026

Download Ends

23 Oct 2026

Submission Starts

14 Oct 2026

Bill of Quantities

PercentageBoQ_Ver3.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (14 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Building Maintenance
1.001	2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil	3.71	cum	257.63	₹956.58
1.002	50.6.1.1:Solid block masonry using pre cast solid blocks ( factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part 1 of 1979 for foundation and plinth with thickness 20 cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete	1.46	cum	6,408.03	₹9,381.36
1.003	5.1.2:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size derived from natural sources)	0.34	cum	10,488.77	₹3,545.2
1.004	5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more	20.28	kilogram	112.43	₹2,280.08
1.005	50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	314.03	kg	230.93	₹72,518.72
1.006	50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	108.33	kg	187.05	₹20,263.13
1.007	OD91751/2026-2027:Providing and fixing 0.35mm thick tile profile/Trafford sheets roofing up to any pitch and fixing with polymer coated J, or L hooks, bolts and nuts 8mm dia. G.I. plain and bitumen washers or with self drilling fastener and EPDM washers etc. complete (excluding the cost of purlins, rafters and trusses), including cutting sheets to size and shape wherever required.	65.93	sqm	621.1	₹40,947.88
1.008	50.12.2.1:Providing & fixing Poly carbonate corrugated sheet 0.8 mm thick as approved by the Engineer in charge and should be supplied in a single length of 12 M or as decide by the Engineer in charge. The sheets shall be fixed using self drilling / self tapping screw of size (5.5x55 mm) with EPDM seal complete upto any pitch in horizontal/ vertical/ curved surface, but excluding the cost of purlins, rafters, trusses, and including cutting to size shapes where ever required.	4.32	sqm	821.86	₹3,550.44
1.009	OD85402/2026-2027:Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of 6mm stone aggregates, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.	18	sqm	1,121.09	₹20,179.62

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.05 MB

Work Item Documents

MANIYARANKUDYANWDYBID.pdf

Tender Documents • 1.70 MB

BOQ_1492256.xls

BOQ • 0.32 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Building Maintenance
1.001	2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil	3.71	cum	257.63	₹956.58
1.002	50.6.1.1:Solid block masonry using pre cast solid blocks ( factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part 1 of 1979 for foundation and plinth with thickness 20 cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete	1.46	cum	6,408.03	₹9,381.36
1.003	5.1.2:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size derived from natural sources)	0.34	cum	10,488.77	₹3,545.2
1.004	5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more	20.28	kilogram	112.43	₹2,280.08
1.005	50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	314.03	kg	230.93	₹72,518.72
1.006	50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	108.33	kg	187.05	₹20,263.13
1.007	OD91751/2026-2027:Providing and fixing 0.35mm thick tile profile/Trafford sheets roofing up to any pitch and fixing with polymer coated J, or L hooks, bolts and nuts 8mm dia. G.I. plain and bitumen washers or with self drilling fastener and EPDM washers etc. complete (excluding the cost of purlins, rafters and trusses), including cutting sheets to size and shape wherever required.	65.93	sqm	621.1	₹40,947.88
1.008	50.12.2.1:Providing & fixing Poly carbonate corrugated sheet 0.8 mm thick as approved by the Engineer in charge and should be supplied in a single length of 12 M or as decide by the Engineer in charge. The sheets shall be fixed using self drilling / self tapping screw of size (5.5x55 mm) with EPDM seal complete upto any pitch in horizontal/ vertical/ curved surface, but excluding the cost of purlins, rafters, trusses, and including cutting to size shapes where ever required.	4.32	sqm	821.86	₹3,550.44
1.009	OD85402/2026-2027:Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of 6mm stone aggregates, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.	18	sqm	1,121.09	₹20,179.62

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Building Maintenance

1.001

2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil

3.71

cum

257.63

₹956.58

1.002

50.6.1.1:Solid block masonry using pre cast solid blocks ( factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part 1 of 1979 for foundation and plinth with thickness 20 cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete

1.46

cum

6,408.03

₹9,381.36

1.003

5.1.2:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size derived from natural sources)

0.34

cum

10,488.77

₹3,545.2

1.004

5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

20.28

kilogram

112.43

₹2,280.08

1.005

50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

314.03

230.93

₹72,518.72

1.006

50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

108.33

187.05

₹20,263.13

1.007

OD91751/2026-2027:Providing and fixing 0.35mm thick tile profile/Trafford sheets roofing up to any pitch and fixing with polymer coated J, or L hooks, bolts and nuts 8mm dia. G.I. plain and bitumen washers or with self drilling fastener and EPDM washers etc. complete (excluding the cost of purlins, rafters and trusses), including cutting sheets to size and shape wherever required.

65.93

sqm

621.1

₹40,947.88

1.008

50.12.2.1:Providing & fixing Poly carbonate corrugated sheet 0.8 mm thick as approved by the Engineer in charge and should be supplied in a single length of 12 M or as decide by the Engineer in charge. The sheets shall be fixed using self drilling / self tapping screw of size (5.5x55 mm) with EPDM seal complete upto any pitch in horizontal/ vertical/ curved surface, but excluding the cost of purlins, rafters, trusses, and including cutting to size shapes where ever required.

4.32

sqm

821.86

₹3,550.44

1.009

OD85402/2026-2027:Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of 6mm stone aggregates, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

sqm

1,121.09

₹20,179.62