ADDN / ALTN TO KHETRAPAL AUDITORIUM AT IMA DEHRADUN

Amount

BUILDING WORKS

S&F FibretteTile of 'Wood fiber Cement Composite '1mm width wood fiber 15 mm thick of size 600x600/ 600x1200mm having excellent noise absorption of 1 NRC as per ISO: 354, Density 400 Kg/ m3, meets Fire Ratings as per BS 476 Part 5,6 and 7 class 1 and P, water resistant and thermal insulated. Installed on G.I studs 600x600mm center to center 2400mm X 50mm web thickness 0.5mm, flanges 15 & 50mm fully knurled giving it high strength, hot dipped galvanized steel with 120GSM zinc coating with a backing of 50mm 1000 GSM thick absorb wool tested as per Fire Retardant IS 15061-2002 for excellent results in ceiling complete including dismantling of existing ceiling with frame all as specified and directed. Make : Himalayan / Armstrong / Anutone

S&F stage wall side and stage ceiling with magnesite bonded wood fiber panels with superfine wood fibres & gypsum, patented with magnesite cement, edge profiles consist of Natural standard Square edge, having density 400kg/m3, Acoustic NRC upto 0.85, eco- friendly, Fire Ratings - Non-combustibility At 750 o C, Thermal Resistance, Water Vapour Diffusion Resistant, size 600 x 600/ 1200/ 2400 x 20 mm as approved installed on GI frame-system requires unfastening and refastening of fasteners if required and tiles will be screwed with screws on GI channel section of size 48mm x 32mm x 0.50mm thick making a grid of 600 x 600mm c/c. The frame is to be made in "proper line after leveling etc work complete including dismantling of existing wall and stage ceiling with frame all as specified and directed. Make :- Armstrong / Anutone / Brillante.

S&F wood grooved acoustic panels with lineal perforation of size 2440mm x 128mm x 15mm with 2mm slats at 15mm pitch made of medium density fibre board substrate with laminated facing (as per approved shade and finish) and melamine balancing layer on the reverse side. The panel shall provide a minimum sag resistance of RH 90. The edges of the panels shall be Tongue and grooved to receive special clip for fixing panel to aluminium extruded keel @ 60mm C/C. The back of panels fixed with non-woven acounstical fleece for sound obsorption behind this fleece 50mm thick rock wool of density 24 Kg/Cum shall be provided. The panels shall be mounted on special aluminium splings fixed over GI channel frame using special clip provided by the manufacture’s/company complete including dismantling of existing wall panels with frame all as specified and directed. Make :- Brillante / Armstrong / Anutone.

S&F acoustical wall panels fixed on GI channel frame of size 48mm x 32mm x 0.50mm thick making a grid of 610 x 610mm c/c and using spl clips and ply board as per manufacture instruction. The frame is to be made in proper line after leveling. The panels will be backed with Rockwool 50mm thick 96 kg/cum density inserted inside the grid of 610mm x 610mm. The frame to be covered by ply boards of 12mm thick (Make:- Marine/Century/Green ply) using self tapping screws. The top surface panels to be of 100% polyester fiber (Fire Retardant using FR) of 2400mm x 600mm / 1800mm x 600mm / 600mm x 600mm x 12mm thick as approved pasted using Heatex / SR505. Density to be 180-200kg/cum and NRC of 0.9 The panel should meet the stringent fire test required having Class ‘P’ rating for Ignitability test as per BS 476 part 5 and Class ‘1’ rating as per BS 476 part 7 for Surface Spread of Flame test. Class ‘P’ and Class ‘1’ are the highest rating. BS 476 part 6 Fire Propagation index, I = not greater than 4.11 complete as per manufacture’s instructions complete including dismantling of existing wall panels with frame all as specified and directed. Make :- Armstrong / Anutone / Brillante.

S&F Stage Proescinium: to be fabricated on site made with 48 x 36mm hard wood batten frame. In fill in 48mm thick 48 kg/cum of density Rock wool insulation padding, fixing on 12mm Water Proof Ply. Finishing with 0.8mm mica (Make with Merino/Green/Century) laminate with fevicol adesive & With Acriylic Sheets Cover Design as approved complete including necessary scaffolding at any height and dismantling existing Proescinium all as specified and directed. Make :- Century / Green Ply / Archildply.

S&F acoustical wooden stage flooring of 1st class teak wood INTER LOCKING planks of size 102mm wide and 38mm thick and length not less than 1.50m with tongue and groove joints on a layer of 19mm thick Marine ply, fixed to teak wood joint 50 x50mm at 600mm centre to centre in one direction and 60 x 50mm teak wood 600mm centre to centre on other direction, teak wood joint resiliently supported on 100 x 100mm rubber pads, the framework to be filled with 50mm thick insulation wool resin bonded insulation of density 24kg/cum. PU polishing of teak wood on the exposed surface. In horizontal/vertical plane (rate for flooring shall include providing additional frame required for housing microphone and power outlet junction-signal & Popup stage boxes, if required & incl. hinged ,18mm thick teakwood cover for the junction boxes complete including teak wood moulding front side complete including dismantling existing wooden floor all as specified and directed.

S&F for designing, fabricating, listing installation and finishing in position 60mm thick acoustic fire door with seasoned Hardwood frame (size 180x70mm) with rebate of required size door should have 6mm thick glass vision panel. Shutter to be made using frame of acoustic sandwich panel core, hardwood or marine plywood structure with stripping in the recesses and on the bottom, surface on both size with 2.5mm thick high-pressure laminate in the desired 19mm thick marine plywood. The core of the door is made up of a sandwich panel of different materials in order to achieve good sound refraction and therefore good acoustic performance. The door to be fabricated with 12mm thick commercial ply (Green/Century/Archid ply) veneer facing and finished with varnish on both sides. Wooden framework filled with Insulation wool with one layer of 80mm thick. 24Kg/Cum density insulation wool. The insulation should be supported with wooden batten of kail wood framework minimum 610mmx610mm to avoid sagging. The door will be fabricated using 90mmx70mm thick teakwood frame. The cost shall include all hardware fittings like heavy duty SS Hinges of suitable size, Handles, Tower bolts, Heavy duty Hydraulic door closers, fixing arrangements and panic bar of approved brand completed including taking down existing door shutter with frame and fittings all specified and directed. Make :- Navair/Global Fire / Absound overseas / Saint Gobain.

S&F CNC Design Cutting 12mm thick HDHMR Board, high density and high moisture resistance premium board with back fixing of 40% light transmission white acrylic sheet. Hard wood used for higher density of product special glue being used to make it water resistant product as per indian climate water resistance characteristics as per ISI standard ideal suitable substrate with sharp cut & round edge, ready & smooth surface work complete including dismantling of existing board all as specified and directed (Stage front side) Make :- Green / Century / Actiontesa.

S&F of auditorium chairs pushback chair of 21’’-24” ctc with manual / auto tip up seat in row with common arms with plastic cup holders / wood / PU waterfall arms in natural finish, logo embroidery, chair fully upholstered in standard foam laminated fabric with net backing. Chairs installed using chemical fasteners, nutboard as per manufacture instruction, manufacture should be a member of BIFMA complete including taking down existing auditorium chair and making good complete all as specified and directed. Note : Chair will be fixed after fixing of carpet. Make :- Wipro - Boxoffice Ballet, Pen workers - PW009 RB, Godjrej – Model Glamour.

S&F of wall WOODWORKS Walls paneling of size 600 x 1200 / 600 x 2400 or as approved size and 19 mm thick, have been NRC Rating D-20 mounting Up to 0.55 Recycled Content 92% materials Fire-retardant particle board surface finish painted, Ultra-violet clear semi-gloss coating Fire performance 25 or less, fixed / installed on Z clip as per manufacture instruction and with no kerfs in any of the edges, gap of 6mm between the panels and fastened to walls panels over 600 x 1200mm upto 600 x 2400mm shall be fastened to the wall with 6 Z clips two near each end and two on each side of the centre. Each Z clip should be secured to the back of the panel with two @ 8 x 5/8’’ modified truss head sharp point screws. Z clips shall be secured to the wall with appropriate fasteners as per manufacture instruction. There is no limit to length of run. Each panel is isolated from every other panel complete all as specified and directed. Make :- Armstrong / Anutone / Brilliante.

S&F of Calcium Silicate false Ceiling designer tile of size 595x595mm x 8mm thick in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gm/sqm both side inclusive) consisting of main T runner with suitably spaced joint to get required length and of size 24 x 38mm made of 0.30mm thick (minimum) sheet, spaced at 1200mm center to centre and cross ‘T’ of size 24 x 38mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main ‘T’ at 600mm centre to centre to form a grid of 1200 x 600mm and secondary cross ‘T’ of length 600mm and size 24 x 38mm made of 0.30mm thick (minimum) sheet to be interlocked at middle of the 1200 x 600mm panel to form grids of 600 x 600mm and wall angle of size 24 x 24 x 0.4mm and laying false ceiling tiles of approved texture in the grid including required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main ‘T’ runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x 1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasteners, 4mm GI adjustable rods with galvanized butterfly level clips of size 85 x 30 x 0.80mm spaced at 1200mm center to centre along main T’’ bottom exposed width of 15mm with black groove in centre of all ‘T’ sections shall be pre-painted with polyester paint. The tiles should have 100% water resistance & fire resistance as per BS 476 part- IV, Light Reflectance >75%. The tile should be Termite proof and thermal conductivity 0.15 w/m OKC of approved texture as per manufacture instruction complete at any height all as specified and directed. Make – Armstrong / Anutone / Brilliante.

M&L for Glazed Virtified tiles, Teakwood texture or any shade/pattern as approved 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 Sqm but not exceeding 1.30 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shall be laid over 15 mm thick bedding layer of CM 1:6 Complete incl. spacers as per manufacture instruction in all as specified and directed by Engr in Charge.

M&L for coloured Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, shall be laid over 15 mm thick bedding layer of CM 1:4 complete all as specified and directed by Engr in Charge.

M&L for Rendering 15mm thick on fair faces of brick work or concrete as in external surfaces in CM 1:4 with WPC as per manufacruer instruction complete all as specified and directed incl Neeru finish to plastering. (Note : WPC Shall be meassured & paid separately)

M&L Glazed coloured ceramic tiles in vertical surface 400 x 350 x 7mm / 300 x 600 x 7 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10 mm thick 1:4 CM as backing coat complete all as specified and directed.

M&L 40 mm thick Cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) as in flooring using extra cement finished even and smooth complete all as specified and directed.

M&L 25 mm thick Cement concrete type B-0, 1:2:4 (12.50mm graded stone aggregate) for sub base for laying floor finish complete all as specified and directed.

M&L 75mm dia centrifugally cast Hubless cast iron pipe in any length with EPDM rubber gasket laid in trenches or in floors complete all as specified and directed.

M&L 110mm dia Centrifugally cast hubless cast iron pipes, in any length with EPDM rubber gasket joint laid in trenches or in floors complete all as specified and directed.

S&F in repairs Grating doom 100 mm dia of PTMT (Minimum weight 25 gms) complete all as specified and directed.

S&F in repair 75 mm out side diameter Centrifugally cast hubless floor trap plain with grating including shielded coupling with EPDM rubber gasket complete all as specified and directed.

S&F 110 mm bore Centrifugally cast iron hubless bends any radius complete all as specified and directed.

S&F 75 mm bore Centrifugally cast iron hubless bends any radius complete all as specified and directed.

M&L for PCC type B-1, 1:2:4 (20 mm graded stone aggregates ) use in lacing course and similar items complete all as specified and directed.

Providing and laying water proofing treatment to vertical and horizontal surface in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) The existing surfaces both at horizontal & vertical shall be cleaned by removing all the loose mortar, laitance, dirt dust etc by chisel hammer/wire brush/jute brush and air blower machine. Two coats of elastomeric compound viz. beck bond WPC – 30 (Make – Beck India Ltd) / Master coat IRC (Make – Conchem India) over one coat on neat primer i.e. Super Latex (Make- Dr. Fixit) / Master bond (Make – Conchem) shall be applied on the cleaned surfaces. (b) Application of polysulphite sealant (Make- Dr, Fixit/STP/Chowskey) around any outlet pipe of 75mm bore (Approx 25mm wide and 10 to 12mm deep) in toilet / kitchen / washing areas and the like shall be given to make water tight. (c) Application of polysulphite sealant (Make – Dr Fixit/STP/Chowskey) around any outlet pipe of 100 mm bore (Approx 25mm wide and 10 to 12 mm deep) in toilet / kitchen / washing areas and the like shall be given to make water tight. Contd.....

(d) 15mm thick plaster in cement mortar 1:3 using liquid water proofing compound @ 200 ml per 50 kg (bag) of cement or as per manufacturer’s instructions shall be applied at both horizontal & vertical surface. However, deviation if any, shall be priced at the rate of 2% by weight of cement with dry WPC. The sunken portion shall be filled with lean concrete 1:5:10 using brick aggregate as approved by GE including fixing of sanitary items requiring embedding in cement concrete. (e) The sunken floor shall then be tested for leakage/seepage by ponding it with water for minimum 72 hours. There shall not be any seepage/dampness in the slab as seen underneath and sides.

M&L for Precast RCC Slabs type B1,1:2:4 (20mm graded stone aggregate) set in CM 1:4 CM complete all as specified and directed.

M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in brick work built in 1:4 CM complete all as specified and directed.

M&L Mild steel bars 10mm dia & over, TMT bars cut to length bent to shape required, including cranking, bending spirally for hoping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to complete all as specified and directed.

M&L 5 mm thick rendering on concrete or brick surface on ceiling in CM 1:3 complete all as specified and directed.

M&L three coats of white wash on newly plastered surface of ceiling incl preparation complete all as specified and directed.

S&F 15 mm outer dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete all as specified and directed.

S&F 20 mm outer dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete all as specified and directed.

S&F 25 mm outer dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.

M&L for 18-20mm thick Granite mirror polished, machine cut as in platform for wash basin and pantry counters with simple full round edge moulding and facia for pantry counters and double thick edge with full round moulded edge and of required size. The granite full round moulding shall be fixed with araldite adhesive to the counter top. The cost shall be inclusive of cutting for sink, basin, tap etc as when required and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. incl CM 1:4 20mm thick screed bed complete all as specified and directed.

S & F for factory made 30 mm thick fiberglass reinforced plastic (FRP) flush shutter in required colour made with fire retardant grade unsaturated polyester resin moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PIE) / Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically, with testing parameters of FRP laminate confirming to table 3 of IS:14856 : 2000,complete all as specified and directed. Make : Fiber ways, Rajshri, M/s Kumar Arch Tech Ltd.

S & F factory made fiber glass reinforced plastic (FRP) Door frames having three legged of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30mm thickness. The laminate doorframe molded with fire retardant grade unsaturated polyester resin. Doorframe laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiberglass from all side. MS stay shall be provided at the bottom to steady the frame confirming to IS:14856 complete all as specified and directed. Make : Fiber ways, Rajshri, M/s Kumar Arch Tech Ltd.

Taking down chowkhats or frames area exc 1.50 Sqm but not exc 4.0 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

S&F 150mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S&F 100mm stainless steel butt hinges complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts of extruded sections and fixed 150mm size complete all as specified and directed.

S&F Aluminium handles, cast type anodised of 150mm size complete all as specified and directed.

S&F mirror of any size and 6 mm thickness to be pasted on 12mm thick BWP type, 5 ply as base, to be fixed with SS studs complete all as specified and directed.

S&F frosted toughened glass partitions size 450 mm x 1000 mm x 6 mm thk., to be fixed with SS hardware complete all as specified and directed. The edge of glass to be 4 mm chamfered both sides.

S&F in repair white Wall Hung WC with UF soft close slim seat cover of approved shape (size: 360x500x380 mm) including S&F vitreous china concealed cistern with duel flush fitting, of flushing capacity 3 litre/6litre and adjustable 2litre/4 Litre including seat cover, and cistern fitting, nuts, bolts and gasket , etc complete all as specified and directed. Make- Jaquar cat part no.- ACS-WHT-87953 BIUF, Hindware cat part no.- 92592, Parryware cat part no.- SC19877 (F)

S&F in repair white vitreous china powered by 220 volt AC Model based infrared sensor operated urinal of (Size: 480x300x740mm) approx. having Flow rate at 45 psi ≤ 2.5 lpm with concealed urinal sensor, having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification complete all as specified and directed. Make- Jaquar cat part no.- URS-WHT-13263, Parryware cat part no.- ACDC-SUP-002, Hindware cat part no.- 60021.

S&F in repair Wash basin vanity in white color for over counter mounting (Size:420x420x140 mm), 32 mm dia CP waste coupling and connections pipe 450mm / 600mm long braided hose with nipple, nut, oring and rubber washer etc complete. with C.P. wall flange and rubber adopter for waste connection, complete including cutting and making good the walls, wherever required complete all as specified and directed. Make- Jaquar cat part no.- JDS-WHT-25939, Parryware cat part no.- C0438, Hindware cat part no.- 91067.

S&F Blush Tall Boy Deck Mounted Sensor faucet with Control Box (Battery Operated) complete including cutting and making good the walls where required complete all as specified and directed. Make- Jaquar cat part no.- SNR 51443, Parryware cat part no.- T7182A1, Hindware cat part no.- B00TRY8PH6.

S&F wall mounted CP Soap dispenser with metallic bottle etc complete all as specified and directed. Make- Jaquar cat part no.- CAN-CHR-1137N, Parryware cat part no.- T6513A1, Hindware cat part no.- B00TRY8BH7.

S&F hand shower (Health faucet) Flow rate at 45 psi ≤ 6 lpm with 1mtr long Easy Flex Tube in chrome finish and wall hook complete all as specified and directed. Make- Jaquar cat part no.- ALD-CHR-573, Parryware cat part no.- T9961A1, Hindware cat part no.- F160001.

S&F Toilet Paper Holder with flap complete including cutting holes in wall and making good the wall wherever required complete all as specified and directed. Make- Jaquar cat part no.- ACN-1153N, Parryware cat part no.- T6001C1, Hindware cat part no.- F880003CP.

S&F towel rail single towel rail 600mm long including fixing of brackets with CP screws with concealed fitting arrangement of approved quality and colour complete all as specified and directed. Make- Jaquar cat part no.- CAN-ABR-1111SM, Parryware cat part no.- T6001A1, Hindware cat part no.- F880005.

S&F first quality bottle trap (with internal partition) 32mm Size with 250mm & 190mm Long Wall Connection Pipes & Wall Flange etc complete all as specified and directed. Make- Jaquar cat part no.- ALD-CHR-769L300X190, Parryware cat part no.- T3201A1, Hindware cat part no.- F850003.

S&F of CP brass color soap dish of approved design complete all as specified and directed. Make- Jaquar cat part no.- B08CCBJV4V, Parryware cat part no.- T6503A1, Hindware cat part no.- F8800011.

S&F solid state no touch operating fully highgenic SS hand drier of best quality, to be operated with 230 volts, single phase, with fully hygienic condition, with all accessories including cutting and making good the walls, wherever required complete all as specified and directed. Make- Mitsubhishi/Mystair/Dlphy.

M&L Powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) incl powder coating of any colour (Thickness or powder coating not less than 50 micron).complete all as specified and directed.

M&L Powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc.incl Powder Coating (minimum thickness of powder coating 50 micron) complete all as specified and directed.

S&F premium quality Manually operated Roller blinds with Solar protection fabric of high tenacity Polyester Yarn with PVC Coating & Grey Backing, & offer 100% blackout / heat radiance. Fabric shall have GREENGUARD-Weight: 310 to 500 g/m2 (+/-5%), Thickness: 0.47 to 0.55 mm (+/-5%), Fabric Openness Factor: 0%, Tensile Strength (Warp/Weft): 160/170 daN / 5cm, Tearing Strength (Warp/Weft): 11/13 daN, Solar Transmission- 0%, Solar Reflectance 25-69%, Solar Absorption 28-31%, Fungistatic Treatment: Degree 0, Excellent (EN ISO 846-A). Roller Tube shall be of extruded Aluminum alloy 38mm O.D (or as per system dimension) with a minimum wall thickness of 1.0mm duly anodized for long life. Clutch shall be wrap spring design with high strength fiberglass reinforced polyester assembly and high carbon steel springs to transmit motion from driving to driven members of clutch mechanism. complete in all as specified and directed bt Engr in Charge. Make- Vista / Nova / SSG.

S&F of machine crafted box type cabinet bottom unit 560 mm depth using 19 mm Boiling Water Proof plywood (BWP) with 0.6 mm laminate the inside. The shutters will also be machine crafted with the same BWP, with 0.6 mm inside laminate while on the outside it will be 0.8mm laminate or 1mm laminate of glossy finish and a machined edge band of 2 mm. The hinges will be auto loaded hinges of “Hettich” make, which is of international standards. The shelf is to be adjustable with two slots provided at 300mm spacing so as to accommodate the shelf. The plywood should be of thickness 19mmBoiling Water Proof plywood (BWP) with 0.6mm laminate on top and bottom with Machine Cut edge band of 0.5mm thick complete all as specified and directed.

S&F of machine crafted box type over head unit 325 mm depth using 19 mm Boiling Water Proof plywood (BWP) with 0.6 mm laminate the inside. The shutters will also be machine crafted with the same BWP, with 0.6 mm inside laminate while on the outside it will be 0.8mm laminate or 1mm laminate of glossy finish and a machined edge band of 2 mm. The hinges will be auto loaded hinges of “Hettich” make, which is of international standards. The shelf is to be adjustable with two slots provided at 300mm spacing so as to accommodate the shelf. The plywood should be of thickness 19mmBoiling Water Proof plywood (BWP) with 0.6mm laminate on top and bottom with Machine Cut edge band of 0.5mm thick complete all as specified and directed.

BLANK

S&F for Stainless Steel (AISI 304 grade) non magnetic multilayer feuba nickel chrome plated for multipurpose utensils container of with the following items :- (a) Plain basket of size 510x470x100 or 520x485x100 mm -01Nos (b) Multi size plate basket of size 510x470x150 or 520x485x150 mm -01Nos (c) Cutlery basket, with perforated bottom & side of compacted /slots -01Nos for holding cutlery of size 510x470x100 or 520x485x100 mm (d) Plain basket of size 510x470x200 or 520x485x200 mm -01Nos (e) Cup & Saucer of size 380mm x 510mm x 100mm -01Nos (f) Dustbin holder of size 250mm dia and height 1400mm -01Nos (g) Including frame work, telescopic drawer channels, handles etc as required & all as specified sample & design to be approved by GE. Make- Hitachi / Godrej / Hacker.

BLANK

BLANK

BLANK

BLANK

BLANK

BLANK

BLANK

BLANK

S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F of -SS STORAGE RACK of size 900mm width and 375mm depth and height 2000mm and made of main 22 gauge and side 16 gauge - 5 SHELF 18g SS shelves double beeded on all sides, stiffed with 25 x 100 x 25mm hat channels, 38mm sq legs fitted with adjustable nylon bullet feets made out of 202 Grade stainless steel, anti rust and anti Magnetic complete all as specified and directed.

M&L for Granite (of shade telephonic black/ruby red/cadbuy brown/Ocean brown/White) slab of 18 to 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone Including grooving for anti-skid at suitable interval as directed, grinding and polishing complete incl Screed bed 1:6 15 mm thick complete all as specified and directed.

M&L 18-20 mm thick Granite (of any type) slab machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete incl CM 1:3 10 mm thick backing coat complete all as specified and directed.

Complete full rounding of staircase edges with double thick patti full round moulded edges of required size. The granite treads shall be fixed with cement groove on treads and the double thick patti moulded edge shall be joined with araldite adhesive to the tread nosing. The cost shall be inclusive of cutting, moulding, transporation, edge polishing, bottom patti complete all as specified and directed.

S&F stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement. Height of railing min 120 cm, vertical post of dia not less than 65 mm with ornamental top, at the interval of not more than 1.2 m, top rail 65 mm dia and middle rails min 2 Nos. not less than 25 mm dia, pattern all as approved by GE complete all as specified and directed.

Supply and fixing of toughened glass of 12 mm thickness on the ss railing with all accessories and hardware complete all as specified and directed.

M & L for waterproofing treatment to RCC roof by APP modified polymeric membrane (weight not less then 3.6 kg / Sqm) including taking down existing tretment as following step (i) The surface of roof, parapet and gutters, drain mouths etc over which waterproofing treatment is to be applied shall be cleaned of all foreign matter such as fungus, moss, dust etc by wire brushing and dusting. For cast iron drain outlets a grove shall be cut around to tuck in the treatment. Concrete angle fillets shall be provided at junctions between roofs and vertical faces of wall (parapet and other walls) around obstacles such as pipes chimneystacks, etc and other similar situation to ease up about corners. (ii) Primer conforming to IS: 3384-1965 @ 0.30 Kg/sqm to be applied on prepared surface, till the surface is properly impregnated. (iii) Apply a coat of bitumen 85/25 grade @ 1.20 Kg/Sqm over primer. (iv) Over the coat of bitumen as above APP modified polymeric membrane (weight not less than 3.6 Kg/Sqm) unrolled and bonded completely to the substrate with side over lap of 75 mm or end over lap of 100 mm. The overlaps are then sealed/ fused by flame or bitumen as per manufacture instruction. A coat of hot blown bitumen grade 85/25 @ 1.20 Kg/Sqm shall be applied on top of APP modified polymeric membrane and finally it will be finished with a coat of aluminium paint @ 0.20 Kg/Sqm as per manufacturer instructions.

Supplying & fixing panel of aluminium composite panel cladding in approved shape made out of 4mm thk ACP sheet material consisting of 3mm thick FR grade mineral core following NCB part IV fire and life safety (having 2 hours fire resistance in accordance to ASTM E119-12 and BS476 part 6 and7 class 0) sandwiched between two aluminium sheets (each 0.5mm thk of AA 5005/AA3105 grade) the aluminium composite panel cladding sheet shall be coil coated with kynar 500 based PVDF/ Lumiflon flurpolymer resin (having 70:30 ratio of PVDFand acrylic) Polymer (service) coating of bottom face as specified. (Overall weight of ACP shall not be less than 7.5kg/sqm). The main frame using shall consist of M10 X 100 SS anchor fasterner, 110 X 75 X 60 X 6 mm thk AL Bracket on beams& 100 x 70 x 60 x 6mm thk AL Bracket on walls,38mm X 38mmX 2.5 mm thik aluminium tube, AL pop rivets, 20mm X 20mm X75mm X 2mm thk angle AL cleat, M6 x 70mm S.S. nut bolt, EPDM gasket, weather silicon including 'H' frame/ Bamboo scaffolding etc. Services wherever required completed all as specified and directed including taking down existing ACP panel. (Make: Euro Bond / ALEX / ALTO BOND).

M&L for Chipping of unsound weak concrete / cover of reinforcement over RCC member up to 50mm maximum or as per site requirement by chiseling and disposal of rubbish from site and apply or rust remover cum passivator to remove rust from existing reinforcement and then applying a cement based polymer modified rebar corrosion protection system to existing reinforcement as per instruction of Engr-in-Charge. Make :- Sika / Fosroc / Dr Fixit.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L for 15 mm thick rendering in CM 1:4 on fair faces of brick wall, finished even and smooth without using extra cement mixed with WPC as per manufacturer instruction complete all as specified and directed. (Note : WPC Shall be meassured and paid separately)

Supply only integral water proofing coumpound complete all as specified and directed.

M&L Brickwork with subclass ‘B’ burnt bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

M&L Rendering 15mm thick 1:6 CM on fair faces of brick work or concrete surfaces complete all as specified and directed.

M&L two coats of Acrylic plastic emulsion paint over two (2mm thick) coat of interior wall care putty on New / Old prepared plastered wall surface complete all as specified and directed.

M&L for Complete removal of existing treatment of plastered surface complete all as specified and directed.

M & L for preparation of old decorated surface of exterior wall by removing existing teatment with machanical sander (rpm 1500-2700) along with internal dust extraction system for clean environment certified by reputed paint manufacturers, then washing the surface with Bleaching powder solution for treatment of fungal growth and applying two coats of exterior anti fungal acrylic emulsion paint (walmista of Berger paint or equitant in Asian paint, Nerolac etc having three years of performance warranty) over a coat of exterior water based primer of same make all as specified and prescribed by manufacture of paint and as directed. Note : (i) The old surface must be prepared in a manner so that there should not be any impression of dent and it should to made even all as per manufacture instruction before application of distempar part. The cost of all materials T&P and labour required of preparation of surface are deemed to be included in the rate quoted. (ii) The work must be got executed through authorised applicator of manufacturer and contractor shall submit copy of experience certificate of applicator issued by manufacturer (iii) The cost of scaffolding wherever required are deemed to be included in the rates quoted by the contractor.

M & L for preparation of old decorated neeru surface of exterior wall by removing existing teatment with machanical sander (rpm 1500-2700) along with internal dust extraction system for clean environment certified by reputed paint manufacturers, then washing the surface with Bleaching powder solution for treatment of fungal growth and applying two coats of exterior anti fungal acrylic emulsion paint (walmista of Berger paint or equitant in Asian paint, Nerolac etc having three years of performance warranty) over a coat of exterior water based primer of same make over Neeru finish all as specified and prescribed by manufacture of paint and as directed. Note : (i) The old surface must be prepared in a manner so that there should not be any impression of dent and it should to made even all as per manufacture instruction before application of distemper part. The cost of all materials T&P and labour required of preparation of surface are deemed to be included in the rate quoted. (ii) The work must be got executed through authorised applicator of manufacturer and contractor shall submit copy of experience certificate of applicator issued by manufacturer (iii) The cost of scaffolding wherever required are deemed to be included in the rates quoted by the contractor.

M & L for preparation of newly plastered surface of external wall as prescribed by manufacture of paint and applying two coats of exterior anti fungal acrylic emulsion paint (walmista of Berger paint or equitant in Asian paint, Nerolac etc having three years of performance warranty) over a coat of exterior water based primer of same make all as specified and prescribed by manufacture of paint and as directed at site by Engr-in-Charge. Note : (i) The newly plastered surface must be prepared in a manner so that there should not be any impression of dent and it should to made even all as per manufacture instruction before application of emulsion part. The cost of all materials T&P and labour required of preparation of surface are deemed to be included in the rate quoted. (ii) The work must be got executed through authorised applicator of manufacturer and contractor shall submit copy of experience certificate of applicator issued by manufacturer (iii) The cost of scaffolding wherever required are deemed to be included in the rates quoted by the contractor.

M & L for preparation of newly plastered neeru surface of external wall as prescribed by manufacture of paint and applying two coats of exterior anti fungal acrylic emulsion paint (walmista of Berger paint or equitant in Asian paint, Nerolac etc having three years of performance warranty) over neeru finish a coat of exterior water based primer of same make all as specified and prescribed by manufacture of paint and as directed at site by Engr-in-Charge. Note : (i) The newly plastered surface must be prepared in a manner so that there should not be any impression of dent and it should to made even all as per manufacture instruction before application of emulsion part. The cost of all materials T&P and labour required of preparation of surface are deemed to be included in the rate quoted. (ii) The work must be got executed through authorised applicator of manufacturer and contractor shall submit copy of experience certificate of applicator issued by manufacturer. (iii) The cost of scaffolding wherever required are deemed to be included in the rates quoted by the contractor.

M&L Complete removal of existing treatment and providing two coats of PU polishing on wooden surface complete all as specified and directed.

Demolition of brick work or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc but excluding ashler facings, dressed stone work and precast concrete articles complete all as specified and directed.

Demolition of Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Taking up or down 20mm steel tubing and connections complete all as specified and directed.

Taking up or down 15mm steel tubing and connections complete all as specified and directed.

Taking down chowkhats or frames area n exc 1.50 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

BLANK

S&F Stage finishing items as under : The stage is 33.5 meter wide at front and 25.04 meter at the back. It will have centre opening motorized main curtains, mid curtains, rear curtains, side wings and ceiling curtains (Frills) to cover the light fittings. All these items will be considered as one lot. The height of curtain is approximately 11 meter. 1. Main motorized curtain assembly - 3 No • 33500mm in two parts with 900mm (min) overlap when close and should be stitched into double gathering with masking frills. • Guide rails made of 1”x1” MS angle or pipe • Curtain Carriers: Standard carriers of plated steel with a pair of neoprene wheels riveted parallel to body. Equip carriers with plated-steel swivel eye for attaching curtain snap or S-hook. Provide quantity of curtain carriers sufficient for track length, to suit curtain fabrication. • Master Curtain Carriers: One master carrier, for each leading curtain edge, of plated steel with two pairs of neoprene wheels and with two line clamps per carrier. • End Pulleys and Floor Block: One dead-end, single-wheel pulley; one live-end, Double-wheel pulley; and one adjustable, floor block containing guarded ball bearing sheaves enclosed in steel housings. • 4 mm steel rope for movement. • Limit Switches: Fully closed and fully opened preset stops (mounted on drumassembly). • Gear box with three speed pulley.

• Cable drum with grooved drum and cable tension device to automatically takeup cable slack and retain cable in grooves. • Motor unit support with tension adjustment. • Remote control with open, close and stop operations. Reversible AC motor of 1 HP, 230V • Mounting of whole assembly should be such that, it gives noise free operation. 1.1 Curtains - 2 Nos • approx. size 18000mm x 11000mm 1.2. Mid Stage Curtain – 2 Nos • approx. size 16000mm x 11000mm 1.3. Rear Stage Curtain – 2 Nos • approx. size 14000mm x 11000mm • Curtain made of velvet curtain cloth complete fire reretardent with living 100% not less than 300 GSM alongwith Nava strip 50mm wide and eyelest of suitable size • 60% Fullness (additional fabric to be formed in pleats) • Easily removable from curtain carriers2. Ceiling curtains (Frills) 2 nos • Should cover full span of stage• Black cloth, inherently flame retardant

• 50% Fullness • 2 feet wide • ¾” MS pipe with 2mm wall thickness for support • Matching lace with main curtain at bottom 2. Side wings 6 Nos • 3ft and 2ft wide with hinged joint • height ~11 meter • Thick Black cloth (inherently flame retardant) to be used to cover the frame • Adjustable Angle (except back ones) • Made from 2”x1” 2mm thick pipe 2” square MS pipe running along the depth is to be fitted for supporting these wings. Make : Mayur/Omphile/Raymonds/ JC Goel

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. Incl Brushing neat cement slurry with 3.0kg of cement per sqm complete all as specified and directed.

M & L 600 x 600 x 10 mm thick endura tile polished, multicolour approved shade as in floors etc. set and jointed in neat cement slurry and pointed in white or colored cement to match including laid over 15 mm thick bedding layer of Cm 1:4 complete all as specified and directed

Supply and installation of projector cinema screen cloth of perforated HD mate fabric with borders of size 25.0 m x 10.0 m as per manufacture instruction on existing frame work complete all as specified and directed. Make – Suvira / Draper / Da-lite

Providing and fixing machine tufted loop pile high low Scroll Nylon CRI approved, Carpet effective pile height 6mm total pile weight not less than 1200 gm/sqm. Secondary backing action back not less than 55 gm/sqm in rolls of 3.66 mtr width as per size shade design and direction of Engr-in-Charge. The Carpet to be backed with 6mm thick PU underlay as approved complete including removing of existing carpet all as specified & directed. Make : Absound Floor / Heritage / CCIL.

M & L for providing extra reinforcement with TMT bars 10mm dia and over as per site requirement including cranking, bending spirally for hoping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to complete all as specified and directed.

M&L for providing, mixing & applying two component Epoxy resin concrete bonding coat on prepared RCC surfaces as per manufacture specification including preparation of surface complete all as specified and directed. Make :- Sika / Fosroc / Dr Fixit.

M&L for providing and fixing water tight centering and shuttering including bolting, strutting, propping etc. including removal of form work from column, beam etc complete all as specified and directed.

M&L for supply and apply a ready to use non shrink, cementitious free flow micro concrete up to thickness of 75mm complete all as specified and directed. Make :- Sika / Fosroc / Dr Fixit.

M&L for supply and apply a polymer modified cementitious bond coat, ratio polymer : water : cement of 1:4:6 by weight. Apply the patching mortar when the bond coat is tacky complete all as specified and directed. Make :- Sika / Fosroc / Dr Fixit.

Providing & fixing shear connectors of 8mm dia TOR steel up to 160mm length with anchor Fix ®-3+ / Mungo / Flscher FISV 390 / Hilti RE - 500 Epoxy resin RCC members including power drilling, Cleaning of holes insertion of epoxy, placing shear connectors in position to insure the bond as per manufacture recommendation complete as per site requirement and directed. Make :- Sika / Fosroc / Dr Fixit.

INTERNAL ELECTRIFICATION

Taking down carefully copper/Aluminum point wiring incl fittings (light, fan socket and power) complete including switches, ceiling rose lamp holder and regulator etc and removing from site and making good disturbed surfaces of walls/floors etc complete all as specified and directed by Eng-in-charge. Note: old point wiring obtained from Sl item no 107 to 112 and 164 as below complete all as specified and directed.

M&L point wiring with 1.5 Sqmm (nominal area) two single core PVC insulated unsheathed multi stranded copper conductor cable 1100 volts grade, FRLS-H grade in and including medium duty concealed PVC conduit 20 mm dia or higher and conduit fittings and all accessories with suitable size of Metal flush box suitable for mounting of modular switches, sockets, fan regulator etc with modular plate and frame of 01 module to 18 module as required at site, including contineous earth wire PVC insulated, unsheathed, multi stranded copper conductor cable 1.5 sqmm (nominal area) FRLS-H grade, green colour, up to common earth and connected to earth dolly compete all as specified and directed of the following. Note : 1. Point wiring should be carried out on surface mounted rigid PVC conduit or casing-caping on existing RCC beam, column, roof or false ceiling. 2. Colour code will be maintained as per IE rule i.e. Red/Yellow/Blue for phases, Black for Neutral and Green for earth wire. 3. Cost of Modular Metal flush box, modular plate and frame deemed to be included in quoted rate for point wiring. 4. Make of Modular metal flush box, modular plate and frame, switch, socket, regulator, bell push should be same. 5. Switch, socket, regulator, bell push will be measured and paid under respective item. Contd.....

(a) One light point /bell buzzer point controlled by one, 1 way switch.

(b) One light point controlled by two, 2 way switches.

(c) One ceiling fan/Exhaust fan point controlled by one-one way switch through Regulator.

(d) One three pin 5 Amp socket on same board with other switches.

(e) One three pin 5 Amp socket on independent board

All as per item No 106 above above but one 3 pin socket outlet 15 Amp independent board, with cable 2.5 Sq mm size, with earth continuity coductor of size 2.5 Sq mm complete all as specified and directed.

M&L for new point wiring with 1.5 Sqmm (nominal area) two single core PVC insulated unsheathed multi stranded copper conductor cable 1100 volts grade, FRLS-H grade in and including medium duty concealed PVC conduit 20 mm dia or higher and conduit fittings and all accessories with suitable size of Metal flush box suitable for mounting of modular switches, sockets, fan regulator etc with modular plate and frame of 01 module to 18 module as required at site, including contineous earth wire PVC insulated, unsheathed, multi stranded copper conductor cable 1.5 sqmm (nominal area) FRLS-H grade, green colour, up to common earth and connected to earth dolly complete all as specified and directed of the following. Note : 1. Point wiring should be carried out on surface mounted rigid PVC conduit or casing-caping on existing RCC beam, column, roof or false ceiling. 2. Colour code will be maintained as per IE rule i.e. Red/Yellow/Blue for Faces, Black for Neutral and Green for earth wire. 3. Cost of Modular Metal flush box, modular plate and frame deemed to be included in quoted rate for point wiring. 4. Make of Modular metal flush box, modular plate and frame, switch, socket, regulator, bell push should be same. 5. Switch, socket, regulator, bell push will be measured and paid under respective item. Contd....

(a) One light point /bell buzzer point controlled by one, 01 way switch.

(b) One light point controlled by two, 2 way switches.

(c) One ceiling fan/Exhaust fan point controlled by one-one way switch through Regulator.

(d) One three pin 5 Amp socket on same board with other switches.

(e) One three pin 5 Amp socket on independent board

All as per item No 113 above but one 3 pin socket outlet 15 Amp independent board, with cable 2.5 Sq mm size, with earth continuity coductor of size 2.5 Sq mm. Note : For item No 106 to 119 make of copper cable : RR Kabel / Polycab /Havells ; Make of PVC conduit : AKG / Polycab / Finolex

S&F modular switch 1 way 6 A 1 module complete all as specified & directed.

S&F modular bell push, 6 A, 1 module complete all as specified & directed.

S&F modular switch 2 way 6 A 1 module complete all as specified & directed.

S&F modular switch 1 way 16 A 1 module complete all as specified and directed.

S&F modular socket 6 A- 3 pin 2 module complete all as specified and directed.

S&F modular socket 6/16 A- 3 pin combined 2 module complete all as specified and directed. Note : For item No 120 to 125 and 135 Make : Legrand / Crabtree / Indoasian.

BLANK

BLANK

BLANK

BLANK

BLANK

BLANK

BLANK

BLANK

S&F ding dong bell AC 230 V single pole complete all as specified and directed.

S&F modular fan regulator , 120 watt - 2 module complete all as specified and directed.

S&F ceiling rose, 3 terminal / PVC / polycarbonate, isolated body 250 V AC complete all as specified and directed.

S&F sheet metal enclosure with socket plug top and MCBs single pole and neutral with a two pin and earth plug and socket complete with single pole MCB of 240V and 20 Amps complete all as specified and directed.

S&F Triple pole and earth enclosure (Industrial socket) with a three pin and earth plug and socket complete with one MCB TP, 32Amp, 415V, C-curve on surface or in recess with chained metal cover for the socket outlet and including connections, testing and commissioning complete all as specified and directed.

M&L for sub main wiring in replacement with 2 Single core PVC insulated unsheathed FRLS-H cable 1100 Volts grade heavy duty copper conductor multistranded of size 4.0 sqmm (nominal area) drawing in and including 20 mm or higher dia concealed rigid PVC conduit medium grade with accessories and fittings including chasing/ cutting and Insulated unsheathed FRLS-H cable copper conductor multistranded of size 4.0 sqmm as earth wire upto common earth and connected to earth dolly complete all as specified and directed. Note :- 1. Submain wiring will be carried out on PVC surface conduit or casing-caping only on existing RCC beam, column and roof. 2. Two runs of 4.0 sqmm copper cable for phase and neutral, one run of 4.0 sqmm copper cable for earth and one run of conduit shall be measured as one unit.

M&L for new sub main wiring with 2 Single core PVC insulated unsheathed FRLS-H cable 1100 Volts grade heavy duty copper conductor multistranded of size 4.0 sqmm (nominal area) drawing in and including 20 mm or higher dia concealed rigid PVC conduit medium grade with accessories and fittings including chasing/ cutting and Insulated unsheathed FRLS-H cable copper conductor multistranded of size 4.0 sqmm as earth wire upto common earth and connected to earth dolly complete all as specified and directed. Note :- 1. Submain wiring carried out on PVC surface conduit or casing-caping only on existing RCC beam, column and roof. 2. Two runs of 4.0 sqmm copper cable for phase and neutral , one run of 4.0 sqmm copper cable for earth and one run of conduit shall be measured as one unit.

M&L for sub main wiring in replacement with 2 Single core PVC insulated unsheathed FRLS-H cable 1100 Volts grade heavy duty copper conductor multistranded of size 6.0 sqmm (nominal area) drawing in and including 20 mm or higher dia concealed rigid PVC conduit medium grade with accessories and fittings including chasing/ cutting and Insulated unsheathed FRLS-H cable copper conductor multistranded of size 6.0 sqmm as earth wire upto common earth and connected to earth dolly complete all as specified and directed. Note :- 1. Submain wiring carried out on PVC surface conduit or casing-caping only on existing RCC beam, column and roof. 2. Two runs of 6.0 sqmm copper cable for phase and neutral , one run of 6.0 sqmm copper cable for earth and one run of conduit shall be measured as one unit.

M&L for new sub main wiring with 2 Single core PVC insulated unsheathed FRLS-H cable 1100 Volts grade heavy duty copper conductor multistranded of size 6.0 sqmm (nominal area) drawing in and including 20 mm or higher dia concealed rigid PVC conduit medium grade with accessories and fittings including chasing/ cutting and Insulated unsheathed FRLS-H cable copper conductor multistranded of size 6.0 sqmm as earth wire upto common earth and connected to earth dolly complete all as specified and directed. Note :- 1. Submain wiring carried out on PVC surface conduit or casing-caping only on existing RCC beam, column and roof. 2. Two runs of 6.0 sqmm copper cable for phase and neutral , one run of 6.0 sqmm copper cable for earth and one run of conduit shall be measured as one unit.

M&L for sub main wiring in replacement with 4 Single core PVC insulated unsheathed FRLS-H cable 1100 Volts grade heavy duty copper conductor multistranded of size 6.0 sqmm (nominal area) drawing in and including 25 mm or higher dia concealed rigid PVC conduit medium grade with accessories and fittings including chasing/ cutting and Insulated unsheathed FRLS-H cable copper conductor multistranded of size 2x6.0 sqmm as earth wire upto common earth and connected to earth dolly complete all as specified and directed. Note :- 1. Submain wiring carried out on PVC surface conduit or casing-caping only on existing RCC beam, column and roof. 2. Four runs of 6.0 sqmm copper cable for phase and neutral , two run of 6.0 sqmm copper cable for earth and one run of conduit shall be measured as one unit.

M&L for new sub main wiring with 4 Single core PVC insulated unsheathed FRLS-H cable 1100 Volts grade heavy duty copper conductor multistranded of size 6.0 sqmm (nominal area) drawing in and including 25 mm or higher dia concealed rigid PVC conduit medium grade with accessories and fittings including chasing/ cutting and Insulated unsheathed FRLS-H cable copper conductor multistranded of size 2x6.0 sqmm as earth wire upto common earth and connected to earth dolly complete all as specified and directed. Note :- 1. Submain wiring carried out on PVC surface conduit or casing-caping only on existing RCC beam, column and roof. 2. Four runs of 6.0 sqmm copper cable for phase and neutral , two run of 6.0 sqmm copper cable for earth and one run of conduit shall be measured as one unit.

M&L for sub main wiring in replacement with 2 Single core PVC insulated unsheathed FRLS-H cable 1100 Volts grade heavy duty copper conductor multistranded of size 10.0 sqmm (nominal area) drawing in and including 20 mm or higher dia concealed rigid PVC conduit medium grade with accessories and fittings including chasing/ cutting and Insulated unsheathed FRLS-H cable copper conductor multistranded of size 10.0 sqmm as earth wire upto common earth and connected to earth dolly complete all as specified and directed. Note :- 1. Submain wiring carried out on PVC surface conduit or casing-caping only on existing RCC beam, column and roof. 2. Two runs of 10.0 sqmm copper cable for phase and neutral , one run of 10.0 sqmm copper cable for earth and one run of conduit shall be measured as one unit.

M&L for new sub main wiring with 2 Single core PVC insulated unsheathed FRLS-H cable 1100 Volts grade heavy duty copper conductor multistranded of size 10.0 sqmm (nominal area) drawing in and including 20 mm or higher dia concealed rigid PVC conduit medium grade with accessories and fittings including chasing/ cutting and Insulated unsheathed FRLS-H cable copper conductor multistranded of size 10.0 sqmm as earth wire upto common earth and connected to earth dolly complete all as specified and directed. Note :- 1. Submain wiring carried out on PVC surface conduit or casing-caping only on existing RCC beam, column and roof. 2. Two runs of 10.0 sqmm copper cable for phase and neutral , one run of 10.0 sqmm copper cable for earth and one run of conduit shall be measured as one unit.

M&L for sub main wiring in replacement with 4 Single core PVC insulated unsheathed FRLS-H cable 1100 Volts grade heavy duty copper conductor multistranded of size 10.0 sqmm (nominal area) drawing in and including 25 mm or higher dia concealed rigid PVC conduit medium grade with accessories and fittings including chasing/ cutting and Insulated unsheathed FRLS-H cable copper conductor multistranded of size 2x10.0 sqmm as earth wire upto common earth and connected to earth dolly complete all as specified and directed. Note :- 1. Submain wiring carried out on PVC surface conduit or casing-caping only on existing RCC beam, column and roof. 2. Four runs of 10.0 sqmm copper cable for phase and neutral, two run of 10.0 sqmm copper cable for earth and one run of conduit shall be measured as one unit.

M&L for new sub main wiring with 4 Single core PVC insulated unsheathed FRLS-H cable 1100 Volts grade heavy duty copper conductor multistranded of size 10.0 sqmm (nominal area) drawing in and including 25 mm or higher dia concealed rigid PVC conduit medium grade with accessories and fittings including chasing/ cutting and Insulated unsheathed FRLS-H cable copper conductor multistranded of size 2x10.0 sqmm as earth wire upto common earth and connected to earth dolly complete all as specified and directed. Note :- 1. Submain wiring carried out on PVC surface conduit or casing-caping only on existing RCC beam, column and roof. 2. Four runs of 10.0 sqmm copper cable for phase and neutral , two run of 10.0 sqmm copper cable for earth and one run of conduit shall be measured as one unit.

M&L for new sub main wiring with 4 Single core PVC insulated unsheathed FRLS-H cable 1100 Volts grade heavy duty for AC copper conductor multistranded of size 16.0 sqmm (nominal area) drawing in and including 25 mm or higher dia concealed rigid PVC conduit medium grade with accessories and fittings including chasing/ cutting and Insulated unsheathed FRLS-H cable copper conductor multistranded of size 2x16.0 sqmm as earth wire upto common earth and connected to earth dolly complete all as specified and directed. Note :- 1. Submain wiring carried out on PVC surface conduit or casing-caping only on existing RCC beam, column and roof. 2. Four runs of 16.0 sqmm copper cable for phase and neutral , two run of 16.0 sqmm copper cable for earth and one run of conduit shall be measured as one unit. Note : For item No 139 to 149 make of Copper cable : RR Kabel/Polycab/Havells ; Make of PVC conduit : AKG/Polycab/Finolex

S&F NEW sheet metal enclosures DB SPN, 240 volt with 100 amps rated copper bus bar for double door 12 way IP-43DB's lk-09 suitable for one MCB SPN as incoming and 10 MCB SP as outgoing, mounting flush on wall and making good disturbed surfaces complete all as specified and directed. (MCBs shall be measured and paid separately). Make : Legrand 5076 12 / Crabtree / ABB.

S&F NEW sheet metal enclosures DB SPN, 240 volt with 100 amps rated copper bus bar for double door 8 way IP-43DB's lk-09suitable for one MCB SPN as incoming and 10 MCB SP as out going, mounting flush on wall and making good disturbed surfaces complete all as specified and directed. (MCBs shall be measured and paid separately). Make : Legrand 5076 11 / Crabtree / ABB.

S&F NEW sheet metal enclosures DB SPN, 240 volt with 100 amps rated copper bus bar for double door 4 way IP-43 DB's lk-09 suitable for one MCB SPN as incoming and 10 MCB SP as outgoing, mounting flush on wall and making good disturbed surfaces complete all as specified and directed. (MCBs shall be measured and paid separately). Make : Legrand 5076 10 / Crabtree / ABB.

Supply & fixing in replacement and Testing TP & N horizontal type, 4 way, 415 Volts, 50 Hz, indoor type double door sheet metal enclosure IP-43 DB's IK-09 flush mounted with 100 Amp Copper busbar for each phase with two neutral bar & two earthbar and cable ties for cable management including Provision of MCB 63 Amps, four pole as in comer including connecting terminal strip complete and SP MCBs as outgoing etc complete pre wired with suitable size copper conductor. The DB's shall hold type test certificate (CPRI) as per IEC 61439-3 complete all as specified and directed including taking out old unserviceable DB and removing from site and making good of disturbed surface. (Note :- MCCBs/MCBs shall be measured and paid separately). Make : Legrand 5077 25 / Crabtree / ABB.

Supply & fixing in replacement and Testing TP & N vertical type, 6 way, 415 Volts, 50 Hz, indoor type double door sheet metal enclosure IP-43 DB's IK-09 flush mounted with 250 Amp Copper busbar for each phase with two neutral bar & two earthbar and cable ties for cable management including Provision of MCCB 160A Amps, four pole as in comer including connecting terminal strip complete and SP MCBs as outgoing etc complete pre wired with suitable size copper conductor. The DB's shall hold type test certificate (CPRI) as per IEC 61439-3 complete all as specified and directed including taking out old unserviceable DB and removing from site and making good of disturbed surface. (Note :- MCCBs/MCBs shall be measured and paid separately). Make : Legrand 5077 46 / Crabtree / ABB.

Supply & fixing LED luminaire 600x600mm 35/36 watt, 220 volt AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders, & LED lamps suitable for roof ceiling including connecting up with driver three core flexible copper conductor of suitable size complete all as specified and directed. Make :- PHILIPS RC380B LED36S, HAVELLS PETAL2X2PLR36WLED857S, WIPRO slim panel D414065.

Supply & fixing round shape 12 watt, 220 volt AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders, & LED lamps suitable for roof ceiling including connecting up with driver three core flexible copper conductor of suitable size complete all as specified and directed. Make :- HAVELLS INTEGRAHEDLR12WLED857S, WIPRO wave downlight D541265, Philips 12W round AP plus ultraglow.

All as per item No-155 above but fixing on surface complete all as specified and directed. Make :- HAVELLS trim Clipon LED panel round, WIPRO wave downlight D711265, CROMPTON LSDSSV-12W-CDL.

Supply & fixing LED light fitting 1x20 watt, 220 volt AC decorative box type with driver, holders,including LED tube light connecting up with three core flexible copper conductor of suitable size from ceiling rose complete all as specified and directed. Make :- PHILIPS BN308C LED20S-6500 L120 PSU WH, HAVELLS Crystal glass LED tube light and regal batten, Crompton LDLL20-CDL WHITE.

Supply & fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt, 220 volt AC decorative type with driver, holders,including LED lamp connecting up with three core flexible copper conductor of suitable size complete all as specified and directed. Make :- PHILIPS 34034/14/86, WIPRO magma, Luker LMR 10.

Supply and Fixing in replacement Integral LED Street Light Luminaire comprising of pressure die cast aluminum housing heat resistant toughened glass with frame IP-65 protection road way luminaries with high power LED 60 watt with efficiency 100 lumen/watt at system level, CCT>5700K, with average life class 50,000 burning hours including GI brackete made out of 25 mm GI pipe medium grade and MS clamps for fixing of light fitting complete and connected with twin core PVC insulated copper flexible cable with existing point complete all as specified and directed. Make :- HAVELLS ENDURAPEARLNEOSL60WLED757PASYTOPC, PHILIPS BRP062 LED 65 CW SLA S1 PSU 062 LED 65 CW SLA S1 PSU, WIPRO 60W SKYLINE LR02-671-XXX-57-XX.

Supply & fixing LED wall bracket fitting 1x10 W, 220 volt AC including LED bulb, holders connecting up with three core flexible copper conductor of suitable size complete all as specified and directed. Make :- PHILIPS 31425 , HAVELLS GOBLE TO WL 2LS E27 GLD 1 n x7.5 W LED filament lamp, WIPRO 41226.

Supply & fixing LED wall bracket fitting 2x10 W, 220 volt, AC including LED bulbs, holders, connecting up with three core flexible copper conductor of suitable size complete all as specified and directed. Make :- HAVELLS goble to wl 2ls e27 gld 2 n x7.5 W LED filament lamp, PHILIPS 31426, WIPRO 41227.

Supply and fixing of up and down long wall sconce lights 2-6 watt, water proof (warm white lights) complete all as specified and directed. Make :- PHILIPS 58159 Gamma, Sparc light 8w up & down, SYSKA SSK-3011-6W.

Supply & fixing LED step light/ foot light fitting (at steps of inside of Hall) 1x3W, 220 volt AC including LED light driver, holders connecting up with three core flexible copper conductor of suitable size complete all as specified and directed. Make PHILIPS Cat No 34152, SYSKA SSK-3508+B-5W, Havells 4 module (AHOPFCWL04).

M& L for Wiring for group controlled (looped) call bell point, skirting light, reading light & step light with 1.5 sq. mm FRLS-H PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. complete all as specified and directed. Make of Copper cable : RR Kabel/ Polycab / Havells. Note : Per 5 light fittings controlled by one switch or MCB shall be measured as one Light point. In additional per 5 or less light fittings controlled by same switch or MCB shall be measured as one light point.

M& L for New Wiring for group controlled (looped) call bell point, skirting light, reading light & step light with 1.5 sqmm FRLS-H PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. complete all as specified and directed. Make of Copper cable : RR Kabel / Polycab / Havells. Note : Per 5 light fittings controlled by one switch or MCB shall be measured as one Light point. In additional per 5 or less light fittings controlled by same switch or MCB shall be measured as one light point.

S&F MCB SP, 5 to 32 Amps,240 Volt 10 KA 'C' curve conforming to ISI marked complete all as specified & directed .

S&F MCB SPN, 32 to 63 Amps,240 Volt 10 KA 'C' curve conforming to ISI marked complete all as specified and directed.

Supply and fixing of MCB TPN, 63 Amps, 415 Volt,10 KA 'C' curve complete all as specified and directed.

Supply and fixing of MCCB, 3 Pole, Adjustable type,160 Amps with breaking capacity 36 KA complete all as specified and directed.

Supplying and fixing 63 Amps, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the extisting MCB DB complete with connections, testing and commissioning etc. complete all as specified and directed.

Supplying and fixing 40 Amps, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. complete all as specified and directed.

Supply and fixing of ceiling fan 1200 mm sweep, AC, 230V,50Hz,Minimum air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current (BLDC) motor including remote control with dry cells ,three blades, down rod of suitable length ,three core flexible copper conductor of suitable size and accessories complete all as specified and directed. (Colour of ceiling fan will approved by GE). Make : Orient electric automiser, Crompton Energion HS 1200, Havells efficiencia.

Supply and fix ceiling fan 1400 mm Sweep, AC, 230V,50Hz, copper wound, double bearing with three blade, down rod of suitable length, three core flexible copper conductor of suitable size and accessories complete all as specified and directed. Make : HAVELLS SS 390, Crompton Aura-1400, ALMONARD BO74W8CD7B.

Supply and fixing exhaust fan steel body AC single phase 230 V of size 300 mm sweep with blades and frame and louvers complete all as specified and directed. Make- HAVELLS Ventil DSP, Crompton Trans Air, ALMONARD BO6W5GWSMW.

Supply and fixing exhaust fan steel body AC single phase 230 V of size 380 mm sweep with blades and frame and louvers complete all as specified and directed. Make- HAVELLS Turbo Force, Crompton heavy duty 380mm

Supply and fixing modular blanking plate on existing modular plate & switch complete all as specified and directed.

S&F Modular AC Box, SPN type with 3 pin plug and socket with and including one MCB SP,25 Amp, C Curve type, 10 kA including connection complete all as specified and directed. Make : Legrand / Crabtree / ABB.

M&L for Earthing complete with copper earth plate electrode 60×60cm×3.15mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to copper earth lead strip 20x3 mm by means of bolts, nuts, check nuts and washers of copper / brass all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion complete all as specified and directed. (04 Nos earthing for int elct. & 04 Nos for Lighting protection system) Note : 1. Upto 7.5 Mtr copper strip included in quoted rate for earthing. Additional copper strip will be measured and paid under respective item. 2. On testing after completion if the desired earth resistance is not obtained the earthing will be redone at no extra cost.

Supply and fixing of earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 20x3 mm copper strip with saddles / insulators at 50cm distance, complete all as specified and directed.

M&L for Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead strip 25x4 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion complete all as specified and directed.

M&L Test point terminal block made of gun metal or phosphorus bronze of size 75x75x25mm, drilled and screwed including 3 Nos 8 mm dia 25 mm long hexagonal head screws, complete all as specified and as directed.

M&L Single pointed air termination Copper rod , 12 mm dia , 300 mm long, complete all as specified and as directed.

M&L Galvanised iron tubing, medium grade, 25 mm bore, for lighting protection rod fixing on roof with plain cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate, complete all as specified and as directed. Note : PCC 1:2:4 shall be measured and paid separately.

M&L for plain cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate, complete all as specified and as directed.

Supply and fixing of earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 25x4 mm GI strip complete all as specified and directed.

STAGE LIGHT

Supply of par light of Indoor LED par 54 LED Par 150w-200w, voltage -110v -250v / 50-60HZ,lamp-TX high power LEDS; 3w x54 LED, (R 14pcs; G14pcs; B14pcs; W12pcs) working position; any safe working position LED display,channel-4/5/7 CHS, Beam Angle-15/25/45/60°, IP Grad-IP20, control mode- master/ slave synchronization, DMX-512 control and auto matic run funcation, construcation-Aluminium and plastic body, silver, white and black optional, (PLS-PL-5403) complete all as specified and directed. Make- PLS 5403 INDOOR, Stan-S-041B, Jia-J163 54 x 3W RGBW.

Supply of LED Cob 24 (4in1) Light 300W RGBW 12w Each x24 LED,80* reflector,Die- casting aliminium housing silver,white,black ect optional master slave synchronization,DMX 512 control,Auto run,0-100% liner dimmer,no noise,quite working whiout heating problem super even mixing colour with COM 4in 1 LEDs for complete all as specified and directed. Make- PLS 2412 FOUR IN ONE, Stan-S-151, Jia-J484 LED 19 x 15W.

Supply of LED Profile spot ULTRA BRIGHT Specification Voltage : AC90-240V, 50/60Hz Power Consumption : 200W LED : 200W Warm White / 2 in 1 / 4 in 1 Service Life : 60000 hours Lens Angle : 19/26/36° Optional Dimmer : 0-100% Linearly Adjustable Ambient Temperature : -25°C -+45°C Control Signal DMX512, Master-Salve, Sound, Auto Control Channel : 1/3CH (Single colour), 2/5CH (2in1)N.W 6 kg, G. WSKG Dimensions : 450*280*mm Packing Size : 650*300*300mm complete all as specified and directed. Make- PLS UBPL 200, StanS-204,Jia-J491 200W LED PROFILE J491 200W LED PROFILE.

Supply of FOG MACHINE 3000 watts complete all as specified and directed. Make- PLS-ZB-3000, Stan-LF-3000, Jia-J121 SMOKE DMX 3000W.

Supply of Jambo Strobe Type : PL 1500 DX strobe projector Application fields : for internal projections in exhibition areas,booths, show-rooms;discos, disco-pubs, entertainment places;for internal or external projections for stages,hows, strongly crowed events;theatres, multipurpose places; for broadcast, photographer's studios, and studios projections. Power Supply : 230V 50Hz - 120V 60Hz Lamp's complete all as specified and directed. Make- PLS-PL-1500DX, Stan-S-060, Jia-J518 17R 350W.

Supply of MINI PEARL Frequency 50/60 Hz Mating number of Fixtures 96 The Number of Scenes That Can be Saved 60 The Number of Scenes That Can Run Simultaneously 10 The Total Number of Steps in a Multi Step Scenario 4600 Scene Time Control Fade In, Fade Out LTP Sliding Graphics Can be Stored for Each Scene 5 Fader Scenes / Dimming Size complete all as specified and directed. Make- PLS-24/48 Light controller, Canara,Martin, Stan-PEARL 2048, Jia-J330 BABY PEARL.

Supply of Beam light sharpy 10R, Voltage : 110V~240V/50-60Hz, Ballast : Electronic ballast Lamp : 280W / 10R Color temperature : 8500K Life Span : 2000H Colour Wheel : 14 Color + Blank Color Wheel Gobo Wheel : 17 Fixed Gobo + Blank Gobo Prism : Rotation 8-face prism/16 Prism, Bilateral Rotation Lens : High Precision Optical Lens Wash Effect : Adjustable Wash Effects Angle Focus : Linear adjustment Dimmer : 0-100% Linear Adjustment Pan / Tilt : X Axis 540°,Y Axis 250° Automatically Accurate Positioning Beam Angle : Parallel Beam Angel 0 - 3.8° Strobe : Double lens strobe (0.5-9 times / second) Control Mode : Standard DMX512, Automatic and Master / Slave Mode Channel : 16 / 20 Channels complete all as specified and directed. Make- PLS 300w LED 3 in 1 with Zoom Moving Head/ Stan-BEAM 10R YELLOW/Jia-J488 10R 280W

Supply of 2.5 sqmm, 3 Core,1100 Volt, Flexible ABC Conductor, PVC Type D Insulated, Cores laid up, Overall Shielded by Al-mylar along with ATC drain wire & Overall PVC Type ST-3 Sheathed Cable complete all as specified and directed. Make:- Havells WHSFDSKB32X5 / Polycab / RR Kabel.

S&F Aluminum Cable Tray Galvanized Coating 40x100m, 16 gauge for cable management complete all as specified and directed. Make : Legrand /L&T / Hensel.

Supply of Heavy Duty PVC Junction Box with Indicator and 6/16 A Six Pin Switch Socket Combined, White Electric 3 in 1 complete all as specified and directed. Make:- Cona / Indoasian / Anchor.

Supply of DMX Splitter 1 in 8 out (DLMC) complete all as specified and directed. Make- Jia-J447 SPLITTER, PLS, Canara, Martin, Stan-DMX-SPLITTER.

Supply of DMX cables for male to female microphone audio sound, moving head lights, stage lighting data signal wire, spotlight, par light, mixer stereo amplifier, 3-pin male XLR to 3-pin female XLR, in different colours and in length of 1mtr, 2mtr, 3mtr, 6mtr, 9mtr,12mtrs for stage to control room complete all as specified and directed. MAKE:- OCTOPUS / HACUHO / VRCT / MOUNTAIN ARK.

Fixing, installation and testing charges of lights from S.No 182 to 193 above complete all as specified and directed.

LED ILLUMINATED SIGNAGE

Supply, installation, testing & commissioning of LED signage boards of required sizes with EXIT sign writing with 5/10 mm red LEDs including installation of the boards from ceiling / wall using suitable chain / brackets etc complete all as specified and directed.

CABLE NETWORKING

Supplying and drawing 2 pair 0.5 mm High Conductivity Solid Annealed Bare Copper industrial Telephone (Switchboard) Cables with High Density Polyethylene Insulation, Paired, Polyester and Sheathed with High Oxygen Index, Fire Retardant, PVC Compound, Grey Outer Sheath generally conforming ITD Specification in separate surface / recessed PVC conduit complete all as specified and directed. PVC conduit will be masured and paid separately. Make : Havells WHTTATEA2P50 / Polycab / RR Kabel.

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm Electrolytic Grade solid annealed Copper conductor,Jelly Field, Aluminium Foiled and Aluminium wire Braided and protected with PVC sheath in separate surface / recessed PVC conduit complete all as specified and directed. PVC conduit will be masured and paid separately. Make: Havells WHOJTTKARG06 / Polycab / RR Kabel.

Supplying and drawing 1 run of Electrolytic grade solid annealed bare copper conductor,4 Pair unshielded twisted pair (UTP) Industrial cables for LAN Network UTP CAT 6 COMPUTER LAN CABLE WITH STAR SEPARATOR 305 m - Grey/Blue in separate surface / recessed PVC conduit complete all as specified and directed. PVC conduit will be masured and paid separately. Make:- Havells WHLJTTERCAT6 / RR Kabel / Polycab.

S&F of 25 mm dia rigid non-metallic PVC conduit medium grade, ISI marked inclusive of all junction boxes, tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc suitable for LAN/Telephone/TV cable all as specified and directed. Make : AKG / Polycab / Finolex.

S&F of 20 mm dia rigid non-metallic PVC conduit medium grade, ISI marked inclusive of all junction boxes, tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc suitable for LAN/Telephone/TV cable all as specified and directed. Make : AKG / Polycab / Finolex.

S&F of 32 mm dia rigid non-metallic PVC conduit medium grade, ISI marked inclusive of all junction boxes, tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc suitable for LAN/Telephone/TV cable all as specified and directed. Make : AKG / Polycab / Finolex.

S&F of DLP-UPVC 100x50 mm size cable management/ Trunking system including top cover, internal angle, external angle, T Joint, base joint, cover joint, flat angle, divider and end cap on surface/recess complete etc complete all as specified and directed. Make : Legrand / Schneider / L&T

S&F of DLP-UPVC 32x20 mm size cable management/ Trunking system including top cover, internal angle, external angle, T Joint, base joint, cover joint, flat angle, divider and end cap on surface/recess complete etc complete all as specified and directed. Make : Legrand / Schneider / L&T.

Supplying, Installation, Testing and Commissioning of following size screen slim type LED TV Supported Internet Services Netflix, Prime Video, Zee5, Sony Liv, Youtube, Hotstar, Apple TV,Connector Type Wi-Fi, USB, HDMI, digital audio , on the existing wall/floor including wall/floor mounting kit suitable for 100-240V, 50/60Hz, AC Power Supply connections etc complete all as specified and directed :- Contd.....

163cm (65 Inch) Slim LED TV UHD 4K. Make : SAMSUNG 163 cm (65 inch) Ultra HD (4K) LED Smart TV (UA65NU7090KXXL)/Sony Bravia 164 cm (65 inches) 4K Ultra HD Smart Certified Android LED TV 65X9000H (Black) (2020 Model)/LG 165.1 cm (65 Inches) Smart 4K Ultra HD LED TV 65UP7550PTZ (2021 Model, Black).

80cm (32 Inch) Slim LED TV Full HD. Make : SAMSUNG 80 cm (32 Inches) Wondertainment Series HD Ready LED Smart TV UA32T4340AKXXL (Glossy Black) (2020 Model)/Sony Bravia 80 cm (32 inches) HD Ready Smart Android LED TV KD-32W830 (Black) (2021 Model) | with Alexa Compatibility/LG 65NANO80.

DRINKING WATER SYSTEM

S&F water cooler electric driven having approx storage capacity 120 ltr, AC, 230V, 50Hz, single phase and nominal cooling capacity 60 ltr per Hr complete all as specified and directed. Make : Blue Star NST80120B / LG / Voltas.

S&F voltage stablizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V t0 250 V with output voltage stablized at 230 volt with accuracy ± 2.5 % and capacity 2 KVA complete all as specified and directed. Make : V-GUARD / Blue Star / AE.

S&F RO plant of out put capacity 25 ltr/hr electrical & non - storage Water Purifier with RO + UF Purification technology including connecting water supply complete all as specified and directed. Make : KENT PERK (11010) RO + UF Water Purifier (White/ Blue) / Aquaguard/Blue Star.

AIR CONDITIONING

Taking down/ dismantiling of old existing split air conditioner & voltage stablizer any size incl necessary repair works and extra copper tubing if requred, refilling the refrigerant and fixing the same to the location complete all as specified and directed.

Supply and install split AC indoor/outdoor 2TR with in built Heating and Cooling operation and digital Inverter twin rotary compressor, AC,230V,single phase, with cordless remote control unit and complete all as specified and directed. Make- Blue Star / LG / Voltas 2 Ton 3 Star Split Inverter AC (243VH SZS(R32), White) Hot & Cold.

S&F voltage stablizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V t0 250 V with output voltage stablized at 230 volt with accuracy ± 2.5 % and capacity 5 KVA complete all as specified and directed. Make : V-GUARD / Blue Star / AE.

HOT WATER HEATER

Supply and fix electric water heater storage type of capacity 25Ltr, steel body,copper inner tank, heating element 2KW, BEE 5 Star rated with all accessories such as safety valve, thermostate, NRV, Connection piece etc, complete all as specified and directed. Make- Havells monza DX/Usha Aquerra/ Racold Classico

LAN SYSTEM

Supplying, Installation, Testing and Commissioning of 24 Ports 10BASE-T, 100BASETX, and 1000BASE-T (Auto Uplink on all ports) with 2 f 1G SFP (Small Form-factor Pluggable) ports for fiber Gigabit Ethernet modules L2 managed switch in the existing Rack including termination with terminal connectors, configuration and programming etc complete all as specified and directed. (Warranty as per OEM) Make : Netgear /Cisco/ HP

Supply, installation, testing and commissioning of 24 PORT Patch Panel complete with accessories etc complete all as specified and directed. Makes: CISCO/ Netgear/ AMP/HP

Supply and fixing of CAT-6, 24-AWG following length ready made Patch cable complete with accessories etc complete all as specified and directed : - Makes: Netgear / AMP / Legrand / D-Link Contd…..

(a) 1.00 Mtr Patch Cable

(b) 3.00 Mtr Patch Cable

Supplying and fixing of following size powder coated wall/floor mounted type AV/Internet Equipment rack with top and bottom cable entry including power manager, selves and standard accessories complete all as specified and directed. :- (Make : HCL / D-Link / Netrack / HP) Contd......

(a) 6U Rack

SURVEILLANCE

Supply, installation, testing and configuring/ programming of bullet type IP full HD night vision surveillance camera with following specifications on the wall surface / ceiling / existing pole including 128 GB SD Card complete all as specified and directed. Make - Camera - Hikvision/ Honeywell/ UNV/ Bosch Make : SD Card - Sandisk/HP/Samsung/Kingston Contd....

Megapixel: Not less than 5 MP Image Sensor: 1/2.9" Progressive Scan CMOS Optical lense : 2.8mm to 12mm Vari-focul Frame Rate: 20fps (2944 x 1656) Video Compression: H.265+/H.265/H.264+/ H.264 No of streams: 3 Nos Wide Dynamic Range : 120dB Power Supply: PoE / 12 VDC IR Distance: up to 50 meters Ingress protection: IP67 Impact Protection: IK10 Network Storage Slot : Supports upto 128GB MicroSD Card Network interface: 1 f RJ45 10M/100M Certifications: UL listed, CE Day/Night Functionality : IR cut filter with auto switch

Supply, installation, testing and configuring /programming of Dome type IP full HD night vision surveillance camera with following specifications on the wall surface / ceiling / efisting pole including 128 GB SD Card complete all as specified and directed. Make - Camera - Hikvision/ Honeywell/ UNV/ Bosch Make : SD Card - Sandisk/HP/Samsung/Kingston Contd....

Resolution: Not less than 5 MP Image Sensor : 1/2.9" Progressive Scan CMOS Optical lence : 2.8mm to 12mm Vari-focul Frame Rate : 20fps (2944 x 1656) Video Compression: H.265+/H.265/H.264+/ H.264 No of streams: 3 Nos Wide Dynamic Range : 120dB Power Supply: PoE / 12 VDC IR Distance: up to 30 meters Ingress protection: IP67 Impact Protection: IK10 Network Storage Slot : Supports upto 128GB MicroSD Card Network interface: 1 f RJ45 10M/100M Certifications: UL listed, CE Day/Night Functionality : IR cut filter with auto switch

Supply, installation, testing and configuring / programming rack mountable dual OS Network Video Recorder having following features suitable for operation on 240V, 50Hz AC power supply including terminations with end connectors complete all as specified and directed. Make - Hikvision/ Honeywell/ UNV/ Bosch Contd.....

IP video input: 64 IP channels (Upto 12MP Resolution) Video Compression: H.265+ HD Video Output: HDMI1/VGA1 and HDMI2/VGA2 HD Video Output: HDMI1/VGA1 and HDMI2/VGA2 Decoding formats: H.265+/H.265/H.264+/ H.264 MPEG4 Decoding capability: 2-ch @ 12 MP / 4-ch @ 8 MP / 8-ch @ 4 MP/16- Hard Disc: 8 SATA hot swappable interfaces for 8 HDDs Capacity : up to 10TB for each HDD Disc Array: 4 Nos RAID0, RAID1, RAID5, RAID6, RAID10 Network interface: 2 x RJ45 10/100/1000 Mbps USB Interfaces: Front 2 x USB 2.0, Rear Panel 1 x USB 3.0 Certifications: ONVIF compliant, UL listed, CE, RoHS

Supply, installation, testing and configuration of 4 TB Surveillance Hard Disc Drive in the existing NVR (per NVR 4 x 4TB HDD) with all accessories complete all as specified and directed. Make:- WDBU6Y0040BBK-WESN / Seagate STKM4000400 / Samsung M3 4TB.

Supply, installation, testing and configuration of UL Listed PoE Gigabit switch of 8 x 10/100/1000Base T -PoE Ports with 2 x 100/1000 Mbps SFP port to connect the cameras and extend it to the other PoE and NVR including end termination with terminal connectors and power supply adopter complete all as specified and directed. (Make : Netgear / CISCO / HP)

Supply, installation, testing and configuration of UL Listed PoE Gigabit switch of 24 x 10/100/1000Mbps PoE Ports with 2 x SFP port to connect the cameras and extend it to the other PoE and NVR including end termination with terminal connectors and power supply adopter complete all as specified and directed. (Make : Net gear/ CISCO/ HP)

Supply, installation, testing and configuration of UL Listed 8-Port Gigabit Unmanaged Desktop PoE Switch including end termination with terminal connectors and power supply adopter complete all as specified and directed. (Make : Net gear/ CISCO/ HP)

Supply, installation, testing and configuration of 12 port LIU Loaded (Wall / Rack Mounted) with Single mode SC-SC adaptors, SC Pigtail for optic fiber cable, Splice trays and splice protectors including OFC slicing and end termination etc complete all as specified and directed. (Make : Tyco/ D-Link/ Cisco/ HP)

Supply, installation, testing and configuration of Single mode 10/100/1000(Gigabit) Media converter including end termination with terminal connectors, OFC Slicing and power supply adopter complete all as specified and directed. (Make : Net gear/ D-Link/ CISCO/ HP)

Supply, installation, testing and configuration of Single mode SFP Uplink Module for distance upto 10KM including end termination with terminal connectors and OFC Slicing complete all as specified and directed. (Make : Net gear/ D-Link/ CISCO)

Supplying and fixing of following size powder coated wall / floor mounted type AV Equipment rack with top and bottom cable entry including power manager, shelves and standard accessories complete etc as reqd :- (Make : HCL / D-Link / Netrack) Contd.....

a) 6U Rack

b) 42U Rack (with Cooling Fans - 2 Nos)

Supply, installation, testing and commissioning of 55" Professional 24x7 LED Display with 4K UHD, HDMI,USB including wall mounting kit (as per OEM) complete all as specified and directed. Make : Samsung Business QM55R 55 inch 4K UHD 3840x2160 24/7 Commercial Signage LED Display for Business, HDMI, Wi-Fi, and 3-Year WRNTY, 500 nit (LH55QMREBGCXZA), Black/Professional Display Panel Sony Bravia 55 inch 4K Ultra HD HDR, Model Name/Number: FW-55BZ40H/LG UP80, 55 (139.7cm) 4K Smart UHD Display.

S&F of following size outdoor type PVC junction boxes (IP66) on the existing CCTV Poles and wall surface including fixing accessories complete all as specified and directed. (Make : Hensel / GEWISS / Tyco ) Contd…..

a. 100mm x 100mm x 70mm

Supply, installation, testing and commissioning of Fiber Terminal Box complete on the existing wall / surface with accessories including necessary splicing, jointing, termination etc complete all as specified and directed. Make : Tyco / RPG

Supplying and drawing of ready made 10 Mtrs Long HDMI Cable on surface/ in the existing Pipe / false ceiling including termination on both the ends etc complete all as specified and directed. (Make : NT / Extron / Kramer)

Supply and Laying of following core single mode armoured fiber optic cable in the efisting DWC PIPE / in trench / on wall / in CMS / in U rack connection including slicing and termination where ever required etc complete all as specified and directed. Make : Finolex / LAPP / D Link / Polycab Contd.....

a. 12 F Core

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel / PVC conduit required as following :- Contd….

a. 1 run of cable

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ DWC Pipe / CMS/ PVC conduit required as following :- Contd…..

a. 1.5 sqmm 3 core flexible cable

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required :- Contd.....

a. 40 mm dia (OD-40 mm & ID-32 mm nominal)

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit complete all as specified and directed. :- Contd…..

Fabrication and supplying of GI pole of size 50mm dia, 'B' class 4.50 Mtrs with 6mm MS base plate (300mm x 300mm x 6mm ) long with drilling holes for wire entry, earthing stud top cover including one coat of Zinc chromite primary paint, two coats of Aluminium paint etc complete all as specified and directed. Make:-Tata / Jindal / JSW.

BLANK

M&L for Plain Cement concrete 1:3:6 type C2 using 40 mm graded stone aggregate, filling and mass concrete for pole foundation including excavation and refilling all as specified.

Providing and making steel pole collar with cement concrete (1cement : 3 coarse sand : 6 stone aggregate of size 20mm) of specified size and shape including form work, plastering if required, curing etc complete all as specified and directed. (volume of pole/ pipe not to be deducted)

Supply, installation, testing & commissioning of 3 KVA Online UPS System with 1 Phase Input , 1 Phase output and with 12V/28AH SMF Battery 6Nos and MS Rack etc complete all as specified and directed. Make : UPS - Numeric / APC / Emerson Battery : Amaron / Panasonic

Supply, installation, testing & commissioning of 600VA Online UPS etc complete all as specified and directed. Make : UPS - Numeric / APC / Emerson

UPS SYSTEM

Supply, installation, testing and commissioning of 20 KVA UPS with Three Phase Input/ Three Phase Output True Online UPS system including 12V 42AH SMF batteries - 30 Nos with battery Interlink Cable & open type MS Rack including accessories complete all as specified and directed. Make- SIEMENS, V-GUARD, Microtech.

Supply, installation, testing and commissioning of 10 KVA UPS with Three Phase Input/ Three Phase Output True Online UPS system including 12V 42AH SMF batteries - 18 Nos with battery Interlink Cable & open type MS Rack including accessories complete all as specified and directed. Make- SIEMENS, V-GUARD, Microtech.

Supply, installation, testing & commissioning of ceiling mounted type PIR sensor 360° IP 41 for corridor Lighting management with infrared detection angle of not less than 2 x12 m suitable for 230 volts 50Hz AC Supply on ceiling/false ceiling surface complete all as specified and directed. Make- Philips / Schneider / HPL.

FIRE ALARM SYSTEM

Supplying, installation, testing & commissioning of intelligent analog addressable Smoke Detector, highly sensitive , equipped with Dual Chamber Ionization Detectors to detect the smallest smoke particle to activated a loud 85db alarm, battery operated, independent of power supply complete all as specified and directed. Make: Bosch / Eaton / Ceasefire model / Honeywell.

Supply, Installation, Testing and commissioning of 2 -loop Main Control Panel with all facility like Open & Short circuit fire and fault condition & All other Accessories strictly as per 1S:2189. Make: Eaton / Cooper / Ayzo.

Supplying, installation, testing & commissioning of response indicator on surface/recessed MS Box having two LED, metallic cover complete with all connections etc complete all as specified and directed. Make- Bosch, Eaton, Cooper, Ayzo.

Supplying, installation, testing & commissioning of analog addressable fire alarm control panel micro processor based network and expandable with dual stage alarm facilities like hooter, fire/fault indicators, audio visual signals, auto learn features, PC networking connectivity, communication facility with battery backup for 8 hrs normal operation and 15 minutes alarm operation. The control panel shall be provided with hot redundant CPU(degraded mode is not acceptable). The control panel, battery charger etc. shall be UL listed. The panel should be 1 loop capacity & it shall be capable to extend upto 2 loops. The panel shall consist 640 characters LCD display and for networking with software and programming including maintenance free batteries complete all as specified and directed. Make : Bosch / Eaton / Ceasefire / Honeywell.

Supplying, installation, testing & commissioning of addressable manual call point complete all as specified and directed. Make- Bosch, Eaton, Cooper, Ayzo.

Supplying, installation, testing & commissioning of addressable horn cum strobe complete all as specified and directed. Make- Bosch, Eaton, Cooper, Ayzo.

Supplying, installation, testing & commissioning of fire fighter telephone handset complete all as specified and directed. Make- Beetel, Agni, Motorola, Honeywell.

Supplying, installation, testing & commissioning of fire fighter phone jack complete all as specified and directed. Make- Beetel, Agni, Motorola, Honeywell.

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete all as specified and directed.

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel / PVC conduit complete all as specified and directed :- Contd…….

a. 2 X 1.5 Sq.mm

b. 3 X 1.5 Sq.mm

c. 4 X 1.5 Sq.mm

d. 5 X 1.5 Sq.mm

e. 6 X 1.5 Sq.mm

Supplying and fixing of following sizes of PVC conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit complete all as specified and directed. (For Fire Alarm System) :- Make : AKG / Polycab / Finolex. Contd......

Supplying, installation, testing & commissioning of fault isolator complete with base complete all as specified and directed. Make : Agni / Honeywell / Palex.

Supplying, installation, testing & commissioning of addressable fire control module complete all as specified and directed. Make : Agni / Honeywell / Palex.

Supplying, installation, testing & commissioning of addressable beam detector with short circuit isolator (inbuilt or separate) complete with emitter and receiver including connections with remote test features etc complete all as specified and directed. (For Auditorium) Make- Bosch, Newtech, Cooper, Ayzo.

FIRE FIGHTING SYSTEM

Supply erection testing and commissioning of electric motor driven main fire pump set suitable for automatic operation and consisting of following: complete in all respect as required :- (a) Horizontal type, multistage Centrifugal split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal confirming to IS 1520. (b) Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Suitable cement concrete foundation duly plastered with anti vibration pads. (e) 1600 LPM at 30m head Make- - Kirloskar, Jyoti, TULLU, KSB.

Supplying, installation, testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Diesel Driven Pump) (a) Horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. (b) Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, efhaust pipe eftended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc as required. (c) M.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered and with anti vibration pads. (d) 1600 LPM at 30m head Make- - Kirloskar, Jyoti, TULLU, KSB.

Supplying, installation, testing and commissioning of electric driven pressurization pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump) (a) Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS : 1520. Suitable HP squirrel cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS : 325 (b) M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered and with anti vibration pads. (c) 180 lpm at 56 m Head Make- - Kirloskar, Jyoti, TULLU, KSB.

Supply & fixing of Fire Hut for keeping Safe 01 Nos. Terrace Pump complete all as specified and directed.

Supply, installation, testing & commissioning of horizontal type submersible pump set suitable for operation on 3 Phase, 415V, 50Hz power supply with 40 mm dia delivery line in the existing open well including weather proof joint, connecting the delivery pipes etc complete all as specified and directed. Head range : 8 --16 Mtrs Discharge LPS : 4.8--1.9 (Priming pump for wet riser system) Make- Kirloskar, Jyoti, TULLU, KSB.

Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 including fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete all as specified and directed :- Make- NATIONAL TUBE, BHARAT CONDUIT, BCW KANPUR. Contd......

(a) 150 mm. Dia

Supply, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete all as specified and directed :- Make- NATIONAL TUBE, BHARAT CONDUIT, BCW KANPUR. Contd......

a. 25 mm dia

b. 32 mm dia

c. 40 mm dia

d. 50 mm dia

e. 65 mm dia

f. 80 mm dia

g. 100 mm dia

h. 150 mm dia

j. 200 mm dia (wall thickness 6.3 mm)

Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain complete all as specified and directed :- Make- ZOLOTO, LEADER, AUDCO, KIRLOSKAR. Contd......

a. Single headed Gunmetal

Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal / Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal / Stainless Steel cap and chain complete all as specified and directed : Make- ZOLOTO, LEADER, AUDCO, KIRLOSKAR. Contd.......

a. Single headed Gunmetal

Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes complete all as specified and directed :- Make- ZOLOTO, LEADER, AUDCO, KIRLOSKAR. Contd......

a. 40mm dia

b. 100mm dia

c. 150mm dia

Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipments on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. Make- Bosch, Newtech, Cooper, Ayzo, Eaton. Contd......

a. 30 Mtrs

Supply, Installation, Testing and commissioning of 2-way 63 mm instantaneous Inlet connections for Fire Brigade Connection complete all as specified and directed. Make: Tulsi / Newtech / Bosch.

Supply, Installation, Testing and commissioning of 63 mm dia 15 Meters long, Reinforced Rubber Lined, (RRL) IS: 636, Type-A, ISI marked Hose Pipe complete with 63 mm dia Stainless Steel male and female coupling conforming to as per IS: 903 complete all as specified and directed. Make: Tulsi /Newtech / Bosch.

Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling complete all as specified and directed :- Make- Bosch, Newtech, Cooper, Ayzo. Contd......

a. Gun metal

Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 complete all as specified and directed :- Make- Bosch, Eaton, Cooper, Ayzo. Contd......

a. 4 way - 150 mm dia M.S. Pipe

Supplying and fixing air vessel made of 250 mm dia, 8mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade complete all as specified and directed.

Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of efternal and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete all as specified and directed. Make- ZOLOTO, LEADER, AUDCO, KIRLOSKAR.

Supply,fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories complete all as specified and directed :- Contd…..

a. pendent type Sprinkler Make- Bosch, Newtech, Cooper, Ayzo, Eaton.

Supplying & fixing of pressure switch in M.S. pipe line including connection etc complete all as specified and directed.

Supplying, fixing, testing & commissioning of installation control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc of following sizes complete all as specified and directed :- Make- ZOLOTO, LEADER, AUDCO, KIRLOSKAR. Contd.......

a. 150mm dia

Supplying and fixing weather proof standard hose box with double door of size 750mm x 600mm x 250mm Depth made of 1.6 mm thick MS sheet having double opening glazed door with 6 mm thick glass suitable for accommodating 2 number 15 Mtrs long 63 mm dia hose pipe, 1 no short branch pipe mounted on wall & duly painted with Post office RED externally and white internally with synthetic enamel paint complete in all respect for internal hydrant complete all as specified and directed.

Supplying and fixing FRP hose box with double Door of size 750mm x 600mm x 250mm Depth made of FRP having double opening glazed door with 6 mm thick glass suitable for accommodating 2 number 15 Mtrs long 63 mm dia hose pipe, 1 no short branch pipe mounted on wall & duly powder coating paint with Post office RED complete in all respect for internal hydrant complete all as specified and directed.

Constructing masonry Chamber 120 x 120 x 100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) ,including necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 as per standard design.

Supply and testing of following size 1.1 kV grade XLPE insulated, PVC sheathed Aluminium conductor, armoured underground power cable confirming to IS:7098 of earthed system complete all as specified and directed :- Contd…...

a. 150 sqmm 3.5 core

b. 50 sqmm 3 core

c. 25 sqmm 3 core

Supplying and drawing of 3 core 2.5 sqmm FLAT PVC Insulated & PVC Sheathed Industrial copper conductor Cable for submersible pump motors on the existing delivery lines with suitable complete all as specified and directed.

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including efcavation and refilling the trench but efcluding sand cushioning and protective covering etc., complete all as specified and directed :- Make- Finolex, Supreme Industries, Durton. Contd......

a. 120 mm dia (OD-120 mm & ID-103 mm nominal)

Supply & laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe complete all as specified and directed :- Make:- Havells / Polycab / GRANDLAY. Contd…….

185 sqmm 3 core

Supply & laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct complete all as specified and directed :- Make:- Havells / Polycab / GRANDLAY. Contd….....

a. 35 sqmm

b. 95 sq mm 3.5 core

c. 185 sqmm 3.5 core

Supply & laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface complete all as specified and directed :- Make:- Havells / Polycab / GRANDLAY. Contd…..

a. 35 sqmm (clamped with 1mm thick saddle)

b. 95 sqmm 3.5 core (clamped with 25x3mm MS flat clamp)

c. 185 sqmm 3.5 core (clamped with 25/40 of 3mm MS flat clamp)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade complete all as specified and directed :- Contd.......

a. 3 core 25 sq. mm (25mm)

b. 3 core 50 sq. mm (32mm)

c. 3.5 core 150 sq. mm (50mm)

Supplying and fixing 6 SWG Dia GI wire on Surface or in recess for loop Earthing complete complete all as specified and directed.

Supplying and fixing of 10000 litrs capacity water tank (for priming purpose) made up of virgin / FDA Grade plastic material including suitable fixing accessories for surface /roof mounting etc complete all as specified and directed. Make- Finolex, Supreme, Industries, Durton.

Supplying and fixing in position the industrial type pressure gauges with gun metal / brass valves with pressure gauge and socket of suitable size complete all as specified and directed. Make- Bosch, Newtech, Cooper, Ayzo, Eaton.

EXTERNAL ELECTRIFICATION

Supply, installation, testing & commissioning of cubical type Indoor Main LT panel suitable for 415V, 3 Phase, 4 Wire 50 Hz AC supply system having of following Size 350mm (deep) fabricated in compartmentalized design from CRCA sheet steel of 2 mm thick for frame work and covers, 3 mm thick for gland plates i/c cleaning & finishing complete with 7 tank process for powder coating in approved shade, TPN Aluminium Alloy bus bars of high conductivity, connections, interconnections with adequate size copper wire, aluminium bus,RYB LED type indicating lamp with toggle switch, cables, connectors etc. along with necessary nuts & bolts, clamps, grouting bolts, DMC/ SMC bus bar supports, fabrication shall be done in transportable sections, entire panel shall have a common GI earth bar of size 25mm f 5mm at the rear with 2 nos. earth stud, and control wiring with 1.5/2.5 sq mm. PVC insulated FRLS copper conductor single core cable, cable alleys, cable gland plates in two half, i/c providing following switch gears:- (MCCBs shall be with ROH & Spreader terminals. MCCBs upto rating of 200A shall be of 36KA rating with TM release. MCCBs of rating above 200A shall be of 50KA with MP release) contd....

Main Panel : (Essential Panel & Non Essential) Incoming : a) 800 A FP MCCB breaking capacity 50 KA with MP release, Rotary Handle & Spreader Terminal - 1 No. b)630 A FP MCCB breaking capacity 50 KA with MP release, Rotary Handle & Spreader Terminal - 1 No. c) 800 A TPN Al. Bus Bar - 1 Set. d) Multi function meter with suitable size CTs - 2 Sets Outgoing : a) 630 A FP MCCB breaking capacity 50 KA with MP release, Rotary Handle & Spreader Terminal - 2 Nos b) 400 A FP MCCB breaking capacity 50 KA with MP release, Rotary Handle & Spreader Terminal - 2 Nos Bus Coupler 630A FP MCCB with Rotary Handle & Spreader Terminal -1no Bus coupler and Incomers shall be interlocked with Electric and Mechanic interlocking arrangements contd....

Sub Panel : (Essential Panel) Incoming : a) 200 A FP MCCB B/C 36 KA with Rotary Handle and spreader terminal - 1 No. b) 200 A TPN Al. Bus Bar - 1 Set. c) Multi function meter with suitable size CTs - 1 Set Outgoing : d) 63 A TPN MCCB B/C 36 KA with Rotary Handle and spreader terminal- 5 Nos contd....

Sub Panel : (Non-Essential Panel) Incoming : a) 250 A FP MCCB B/C 36 KA with Rotary Handle and spreader terminal - 1 No. b) 250 A TPN Al. Bus Bar - 1 Set. c) Multi function meter with suitable size CTs - 1 Set Outgoing : d) 100 A TPN MCCB B/C 36 KA with Rotary Handle and spreader terminal- 5 Nos

S&F Type A (2mm thick) insulating mat ISI marked suitable for up to 33 kv conforming to IS:15652 including pasting the mats on floor with addisive suitable for electrical mats etc complete all as specified and directed.

S&F Type B (2.5mm thick) ISI marked insulating mat suitable for 11 kv conforming to IS:15652 including pasting the mats on floor with addisive suitable for electrical mats etc complete all as specified and directed.

S&F ISI marked/ PESO approved CO2 gas type fire extinguisher of following capacity and rating confirming to IS: 15683 with extruded aluminium can having spray painted exterior, discharge EPDM hose pipe & horn, pressure gauge, carrying handle, controllable discharge mechanism etc on wall surface using suitable mounting accessories complete complete all as specified and directed. (4.5kg,55B,13s discharge time)

S&F ISI marked / PESO approved ABC type fire extinguisher of following capacity and rating confirming to IS: 15683 with eftruded aluminium can having spray painted efterior, discharge EPDM hose pipe & horn, pressure gauge, carrying handle, controllable discharge mechanism etc on wall surface using suitable mounting accessories complete all as specified and directed. (5kg, MAP 90,13s discharge time)

S&F of 4 Nos. 9.5 Litre capacity GI buckets painted in post office red colour, with ‘FIRE’ stencil lettering in white paint, mounted on MS angle iron frame, hanging brackets, filling with sand, fixing in ground in cement concrete etc complete all as specified and directed.

S&F First Aid Box suitable for industrial work place as approved by St. John Ambulance Brigade / Indian Red Cross on wall surface complete all as specified and directed.

S&F bi-lingual (English and Local Language) shock treatment chart duly mounted on wooden/ aluminium frame with 3mm thick glass complete all as specified and directed. (Chart shall have an approximate dimension of 0.5m x 0.75m)

Supplying of 11KV FRP earth discharge rod cum operating rod safety devices for use in electrical substation complete all as specified and directed.

Supplying of electrical insulating safety gloves for use in electrical substation up to 33 kV complete all as specified and directed.

Supply, installation, testing & commissioning of 4.2 Mtr long decorative type Street light pole Integrated with 24 W LED Module with driver suitable for 240 V 50 Hz Single Phase AC supply, built in control box and control gear tray with prewired terminal connector for loop in loop out arrangement, SP MCB including foundation nut bolt, CC foundation as per OEM Standard , base plate, complete all as specified and directed. Make- Havells 4mPole with ENDURAPEARLSL25WLED757SASYTOPCMP, K-lite KP-4110 KP-45.

Supply, Installation, Testing & Commissioning of Decorative type Bollard fitting 8 W LED Module with driver suitable for 240 V 50 Hz Single Phase AC supply including foundation nut bolt, CC foundation, base plate, complete all as specified and directed. Make :- Havells CONENXGBLS8WLED857PSYMTOPCM, Crompton LBLSN-10-CDL, Philips Pylon Pedestal 78171.

Supplying and embedding following dia G.I. pipe 2 mtr length (medium class) in pole collar/ foundation (during casting) for cable entry including bending the pipe to the required shape complete complete all as specified and directed :- Contd.......

a) 40 mm dia

Supply, Install, connect, testing and commissioning of Step down Transformer out door type copper wound three phase, 4 wire, 415/433 volts 50Hz on primary side,11000 volts, 3 phase, 3 wire on secondary side 415/433, Copper wound oil immersed, naturally cooled, with tapings on primary side to vary secondary voltage from (-) 7.5 % to (+) 7.5 % with steps at every 2.5 % variation with standard fittings / fixtures, with extended cable end box on LT side with neutral brought out complete with initial fill of transformer oil to appropriate level as suggested by the manufacturer, temperature gauge, breather, bucholz relay, cooling coil, suitable size cable glands on LT side, bushing on HT side all as specified confirming to IS : 1180:2014 Part-I of capacity 200 KVA including standard accessories, fitting as per manufactures specification the following : (a) Lifting lugs for transformer and tank (b) Earthing terminals and tatting diagram plate. (c ) Air release device. (d) Oil filling inlet pipe with plug (e) Drain out gate valve. (f) Conservator with level indicator. (h) Initial oil filing with new oil to required level as per IS 335. (j) Delta/star type connection (k) ONAN cooling (l) DNY 11 vector group (m) Cable end box suitable for 3 1/2 core 400 sqmm XLPE cable on LT side. (n) Danger notice plate - 1 No (o) Thermometer with pocket

Supply and erect 2 pole structure on 11 mtr steel Tubular pole consisting of anti-climbing device, PCC foundation & cross arms with GI pipe for cable protection and danger notice plate along with suitable size of nuts bolts and washers etc. All rates shall deemed to be included in quoted rate complete all as specified and directed. Make:- Tata / Jindal / JSW Steel.

M&L for Shackle Type, Porcelain, vitreous, white, brown or green insulator including galvanised mild steel 31x3mm straps, washers, 12mm insulator bolts, washers and nuts, working pressure 11000 volts, height 150mm complete all as directed.

Supply and install HT 11 KV outdoor type gang operated air-break switch suitable for horizontal or vertical mounting fixed type complete with 9 insulators of rating upto 200 Amps complete all as specified and directed.

Supply and fixing lightning arrestor HT 11 KV 10 KA station class complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) with stranded aluminium conductor 11000 volts grade of size 95 sqmm 3 core complete all as specified and directed.

Supply and fix cable joining kit for 11KV grade cable for outdoor termination heat shrink type joint complete with joining material and accessories suitable for 3 core XLPE Aluminium Conductor cable of size 95 sqmm 3 core complete all as specified and directed.

M&L for earthing complete with using galvanized mild steel earth plate (electrode) 600 mm x 600 mmx 6 mm thick buried directly in ground, earth pit not less than 2.25 mtr deep below ground level with top edge of the earth plate not less than 1.50 m below ground level and earth plate surrounded with adequate quantity of charcoal dust mixed with salt to be packed thickness of 15 cm all round the plate using GI earth strip 32x6 mm as earth lead moulded and rivetted to earth plate at one end and connected to main equipment at switch/control board at another end, GI earth lead protected in and including 15 mm dia GI ‘medium grade’ pipe from upper end of earth plate upto equipment with & including 20 mm dia bore GI pipe ‘medium grade’ as water pipe from earth chamber to upper edge of the earth plate, GI funnel with wire mesh fixed on water pipe and provision of PCC 1:2:4 type B1(using 20 mm graded stone agg) as in pits chamber and RCC pit cover 50 mm thick of precast RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as per electrical plate No.3 of SSR Part-I 2010 and testing on completion all as specified and directed.

M&L for earthing complete with using galvanized mild steel earth plate (electrode) 600 mm x 600 mmx 6 mm thick buried directly in ground, earth pit not less than 2.25 mtr deep below ground level with top edge of the earth plate not less than 1.50 m below ground level and earth plate surrounded with adequate quantity of charcoal dust mixed with salt to be packed thickness of 15 cm all round the plate using 4 mm dia GI earth lead wire as earth lead moulded and rivetted to earth plate at one end and connected to main equipment at switch/control board at another end, GI earth lead protected in and including 15 mm dia GI ‘medium grade’ pipe from upper end of earth plate upto equipment with & including 20 mm dia bore GI pipe ‘medium grade’ as water pipe from earth chamber to upper edge of the earth plate, GI funnel with wire mesh fixed on water pipe and provision of PCC 1:2:4 type B1(using 20 mm graded stone agg) as in pits chamber and RCC pit cover 50 mm thick of precast RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as per electrical plate No.3 of SSR Part-I 2010 and testing on completion all as specified and directed.

Supply, install, testing and commissioning of diesel engine driven generating set 415 Volts, complete with Engine instrumentation control panel consisting of monitoring system housed in the Power control panel with net output of 200 KVA, 3phase 0.8 power factor, 50 HZ, 1500RPM, self excited self regulated brushless AC silent (Acoustic enclosure as per CP CB norms) generator suitable for ambient conditions and conforming to conditions under IS-8528 with following (after considering all de-rating factors):- (a) Alternator :- Standard design alternator rated at 200 KVA net output at site after considering de-rating as per site conditions at power factor 0.8 AC 3phase, 4wire, 415 Volts, 50 cycles, 1500 RPM, self excited, self regulated screen protected drip proof IP-23 enclosure brushless design with hub and shield ball/roller bearing with winding in each pole faces insulating class 'H' band of voltage, regulation +/- 1% of rated voltage from no load to full load. The alternator shall be conforming to IS4722/BS2613, Suitable for close coupling with space heaters of suitable capacity of make Caterpillar /Cummins

(b) Diesel Engine :- Adequate capacity not less than 248 HP diesel engine suitable to above alternator (exact BHP should be as per suitable manufacturer equivalent model) of kirloskar or equivalent. Water cooled turbo charged with after cooler to drive independently above alternator directly coupled through flexible coupling multi cylinder, multi stroke direct injection cold starting, 1500 RPM as per relevant IS / BS 5514 part -5 with an over load capacity of 10% for 1 hour in any 12 hours continuous running complete with standard accessories all as specified and required for safe handling and operations. Salient feature shall be as under :- (i) Fly wheel with housing (ii) Air cleaner (iii) Fuel filter (iv) Fuel injection system with injection pump solenoid switch, nozzles, electronic governor etc. (v) Lubricating oil filter (vi) Lubricating oil pump. (vii) Electric starting eqpts comprising of the following :- (a) Batteries of capacity as recommended by manufacturer copper leads of adequate size complete with initial charging. (b) Starter motor (c) Starter gearing. (d) Start and stop push button (e) Battery charging gen with regulator. (f) Ignition Key / switch.

(viii) Silencer complete with exhaust piping upto and out side the building adequate to create draft for safe exhaust without transferring vibration to building/walls duly insulated with asbestos roping of 50 +/ - 10 mm circumference. (ix) Engine protection devices including audio indicators and cut off system during following instances : - (a) Low lubrication oil pressure (b) high coolant temperature. (c) Over speeding of engine. (x) Radiator cooling system comprising of :- (a) Radiator with radiator fan and fan belts. (b) Water pump. (c) Thermostat. (d) Radiator fan& Belt guards. (xi) Hour meter. (xii) RPM indicator. (xiii) Fuel tank capacity adequate for 12 hours running at full load with level indicating arrangement stop cock, drain plug and fuel supply pump complete with piping from tank to pump and to engine including return of over flow. (xiv) Air intake system.

(xv) Hand priming pump. (xvi) Common base plate for mounting engine and alternator. (xvii) Exhaust system as per manufacturer design (xviii) Turbo charger with after cooler (xix) Anti corrosive resistor (xx) Fuel off solenoid (xxi) AVM's (xxii) Electronic instrumentation panel

Supply and lay cable PVC insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 240 Sqmm 3.5 core armoured with multi-stranded aluminium conductor cable conforming to latest IS, laid in trenches/ducts or fixed to poles/walls or laid under roads/paths/drains/culverts duly protected in galvanised steel pipe of suitable sizes all bare conductor of cable duly insulated 1.1 KV grade heat shrinkable sleeve including cable gland and lugging etc at both ends all complete all as specified and directed. Note : Excavation, earth work, cable sand cushioning & cable protection shall be measured separately.

All as per sl no. 383 above but 35 sqmm 3.5 core

All as per sl no. 383 above but 16 sqmm 2 core

Supply and fixing of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100,volts grade, cross-sectional area 35 sqmm 3.5 core armoured with multi-stranded aluminium conductor cable conforming to latest IS, laid in trenches/ducts or fixed to poles/walls or laid under roads/paths/drains/culverts duly protected in galvanised steel pipe of suitable sizes all bare conductor of cable duly insulated 1.1 KV grade heat shrinkable sleeve including cable gland and lugging etc at both ends all complete all as specified and directed. Note : Excavation, earth work, cable sand cushioning & cable protection shall be measured separately.

Supply & fixing LED spike light 5-12 watt weatherised IP65 complete all as specified and directed. Make :- Philips Anthracite COB 31385, Wipro Garnet COB D930765, SLV Garden spotlight halogen GU10.

M&L for Excavation in trenches n. exc. 1.5 mtr wide and n. exc. 1.5 mtr in depth for laying of underground cable, foundation of pole and getting out in soft/loose soil complete all as specified and directed.

M&L for Returning, filling in excavated soil in trenches including spreading, levelling, watering and well ramming in layers n. exc. 25 cm thick complete all as specified and directed.

M&L for Removing of excavated soil to a distance n. exc. 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

M&L for laying local dry clean sand filling for cushioning in trenches around under ground cable complete all as specified and directed.

M&L for laying well burnt brick, old size in trenches, as protection of under ground cable complete all as specified and directed.

EXTERNAL WATER SUPPLY

S&F for galvanised steel tubes, “Medium class”, supplied and laid complete including fittings 40 mm (1.5”) dia complete all as specified and directed.

S&F for galvanised steel tubes, “Medium class”, supplied and laid complete including fittings 25 mm (1.”) dia complete all as specified and directed.

S&F for Stop valve of size 40 mm, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F for Stop valve of size 25 mm, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

M&L for construction of brick masonry valve pit of size 600mm x 600mm x 600mm (internal dimension ) one brick thick wall built in CM (1:4 ) on 100 mm thick PCC (1:4:8 ) type D2 (using 40mm graded stone aggregate ) as in foundation, and 15mm thick rendering in cement mortar (1:4) both externally and internally, external plaster shall be up to 15cm below GL, providing valve pit cover made of 3.15 mm thick MS sheet/plate, including provision of hinges, handle and locking arrangement including 50x50x5mm angle iron frame fixed on top of valve pit by means of MS hold fast 40x5mm and 150mm long, embedded in PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) including two coats of anti-corresive paint over a coat of red oxide zinc Chrome primer and necessary earth work in soft/loose soil including demolition of old unserviceable existing valve pit & pit cover complete all as specified and directed.

M&L for Drilling and tapping cast iron water mains (in position) for branch connections of the internal dia 20 mm complete all as specified and directed.

M&L for supply, installation, testing and commissioning of submersible pump set electric driven Single phase, 50Hz 160-260 volt grade complete with 10 meters submersible cable and suitable starter capacity for motor 1.0 HP. Discharge capacity 3.7 LPS in 12 Mtr Head complete all as specified and directed. Make:- KIRLOSKAR / Crompton / Havells.

Supply & fixing of adjustable type, 3/4" brass fountain nozzles complete all as specified and directed.

Supply & fixing of waterproof/ underwater LED fountain lights under water 15-20W, 220V, 50 Htz complete all as specified and directed. Make :- PHILIPS, CROMPTON GREAVES, Wipro.

STATIC WATER TANK (100 KL CAPACITY)

Rough excavation not exceeding 1.5 m deep and getting out in hard/dense soil complete all as specified and directed.

All as sl item No 404 above but exc 1.5 m and up to 3 m deep complete all as specified and directed.

M&L for cement concrete type C-2 1:3:6 (using 40 mm graded stone aggregates) as in foundations, filling and mass concrete complete all as specified and directed.

Returning & filling in including spreading leveling watering well ramming in layers n.exc 25 cm thick complete all as specified and directed.

Removing excavated material exc. 500 m but n exc. 1.5 Km and depositing where directed complete all as specified.

M&L Rough finished curved form work to sides of concrete foundations, footings, base of columns, raft and raft beams, sides and soffits (if any) of foundations and plinth beams, and similar work, vertical or to batter finished rough complete all as specified and directed.

M&L Rough finished formwork to edges of concrete flats, treads, breaks in floors,window cills, concrete railings,openings in concretewalls, floor and roofs n exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similarwork exc 10cm but n exc 20cm wide complete all as specified and directed.

M&L RCC Design Mix M-30 (20mm graded stone aggregate) Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L 10 mm thick 1:3 CM rendering on fair face of brick work or concrete surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for TMT bars 10mm dia and over cut to length bent to shape reqd including cranking, bending spirally for hooping for columns, hooking ends and binding with incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in reinforcement to concrete complete all as specified and directed.

M&L for TMT bars 6 to 8 mm dia cut to length bent to shape reqd including cranking, bending spirally for hooping for columns, hooking ends and binding with incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in reinforcement to concrete complete all as specified and directed.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

Supplying and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of static water tank., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) The existing surfaces both at horizontal & vertical shall be cleaned by removing all the loose mortar, laitance, dirt dust etc by chisel hammer/wire brush/jute brush and air blower machine. Two coats of elastomeric compound viz. beck bond WPC – 30 (Make – Beck India Ltd) / Master coat IRC (Make – Conchem India) over one coat on neat primer i.e. Super Latex (Make- Dr. Fixit) / Master bond (Make – Conchem) shall be applied on the cleaned surfaces. (b) 15mm thick plaster in cement mortar 1:3 using liquid water proofing compound @ 200 ml per 50 kg (bag) of cement or as per manufacturer’s instructions shall be applied at both horizontal & vertical surface. However, deviation if any shall be priced at the rate of 2% by weight of cement with dry WPC. 9.3.6. (c) Static water tank shall then be tested for leakage/seepage it with water for minimum 72 hours. There shall not be any seepage/dampness in the wall and floor as seen underneath and sides.

ROAD / PATH

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. Incl Brushing neat cement slurry with 3.0 kg of cement per sq. metre complete all as specified and directed.

M&L PCC 1:3:6 type C1 (20 mm graded stone aggregate) for copings, kerbs including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

M & L for Rubberised polished precast coloured interlocking paverblock any shape and size confirming to IS 15658-2006 of 80mm thickness M-40 grade complete with & including 25mm thick sand cushioning layer complete, all as specified and directed.

DUCTING FOR CENTRAL AC PLANT

Supply and fixing Plain, galvanised, Mild steel sheeting of size 22 Gauge with grade of zinc coating 275 complete all, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed. Make:- Tata / Jindal / JSW steel.

Supply and fixing Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Supply & Fixing of Rivets , nut bolts etc complete all as specified and drected.

M&L for plastering in CM 1:4, 10mm thick on fair faces of brick work or concrete surfaces complete all as specified and directed.

Supply and fixing of aluminium diffuser of size 600x600 mm complete all as specified and directed. Make:- HVAC / Air World / CARRIER.

Supply and fixing of aluminium grill of suitable size complete all as specified and directed. Make:- HVAC / Air World / CARRIER.

Supply, installing, commissioning and testing of commercial Air curtain unit for prevention of dust and conditioned air losses, single phase, 220 V, 50 HZ, made out of MS/CRCA sheet of minimum thickness 18 gauge finished with two coats of red oxide primer and final coat of synthetic enamel paint (oven baked) with MS-CRC 18 gauge square perforated suction grills, Aluminium alloy fans and single phase electric motor, nozzles etc, complete with fittings and accessories so as to produce 1 - 1.5 m/sec air velocity at floor level for door opening as specified for the size of air curtain 34" x 78" complete all as specified and directed. Make:- Mitsubishi / CROMPTON / PIONEER.

All as per Sl no. 428 above but air curtain of size 46" x 78". Make:- Mitsubishi / CROMPTON / PIONEER.

All as per Sl no. 428 above but air curtain of size 58" x 78". Make:- Mitsubishi / CROMPTON / PIONEER.

All as per Sl no. 428 above but air curtain of size 70" x 78". Make:- Mitsubishi / CROMPTON / PIONEER.

Note : Tenderers may note that amount of credit Rs 3,19,320.00 will be deducted from the total amount arrived, at the time of Acceptance of contract.

Siya constructions

Nexus Infratech