Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.1 LAccepted-AOC | L1 | Accepted-AOC L1 AND ACCEPTABLE |
Tender Value
₹37 L
EMD Value
₹74,000
Closing Date
2 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE AHMEDABAD
CWE AHMEDABAD
PROVN OF 3D PRINTED G PLUS 1 NCOs AND OR FAMILY ACCN (02 DUs) AT AHMEDABAD CANTT
2022_MES_514813_2
87087
Open Tender
Civil Works
Lump-sum
90 days
AHMEDABAD
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GE (A) AHMEDABAD
₹74,000
Yes
20 Aug 2022
30 May 2022
4 Jul 2022
30 May 2022
2 Jul 2022
20 Jun 2022
Amount
Excavation in trenches in soft/ loose soil n, exc 1.5 mtr deep & wide and getting out in any type of soil and n. exc 10 sqm on plant complete all as specified and directed.
M&L mild steel TMT bar 10 mm dia or above as in rainforcement cut to length bend to shape required and binding with and incl mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.
M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate in foundation, filling, mass concrete complete all as specified and directed.
M & L for 3D printed concrete wall panel and parapet all as specified and directed by Engr-in-Charge.
S & F structural steel in joist, channel, purlins, rafter where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming Fe-410-W (Gde-E-250) all as specified and directed.
M & L for providing 3D printed reinforced cement concrete M25 design mix as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc complete all as specified and as directed
M & L for providing 3D printed reinforced cement concrete M25 design mix as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs, shelves, stair case and the like complete all as specified and as directed
M&L for PCC (1:3:6) type C-2 using 40mm graded aggregate 75mm thick as in plinth protection all as specified
Returning, filling in, including, spreading, levelling, watering and well ramming in layers n exc, 15 cm
Removing excavated material n. exc 50m and depositing where directed at a level n. exc 1.5m above the starting point
M&L for 5mm thick rendering in CM 1:3 finished even and smooth without using extra cement on ceiling, chajja etc complete all as specified and directed
M&L for 15mm thick cement plaster in cement mortar 1:4 on concrete or brick surface and finished even and smooth w/o using extra cement complete all as specified and directed. (Water proofing compound measured and paid seperately)
M&L for integral water proofing compound
M&L for 15mm thick cement plaster in cement mortar 1:6 on concrete or brick surface and finished even and smooth w/o using extra cement
M&L for preparation of new surfaces of wall and applying two coats of cement base paint over one coat of primer complete in all respect as specified
M&L for preparation of new plastered surfaces on walls and applying two coats of oil bound distemper with 2mm thick white wall care putty and a coat of primer complete all as specified and directed.
M&L for preparation of newly plastered surfaces of wall and applying three coats of White wash all as specified
M&L for preparation of newly plastered surfaces of Ceiling and applying two coats of White wash all as specified
M&L for Non Skid ceramic coloured tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.18 Sqm but n. exc 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in CM 1:6 all as specified.
All as per item No 19 above but on vertical surfaces incl 10mm thick backing coat of tiles in CM 1:4 complete as specified.
M&L for Non Skid ceramic coloured joint free tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.06 Sqm but n. exc 0.11 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed CM 1:6 complete all as specified and directed.
M&L for Glazed ceramic coloured joint free tiles of size 450 x 300 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match 15mm thick Backing coat CM 1:4 complete all as specified and directed.
M&L 18-20mm thick Granite (of any type) work (tablee rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade complete all as specified and directed.
M&L machine cut Kota stone slab 18 to 20 mm thick as in flooring or tread of step incl half round moulding over and including screed bed 15 mm thick in CM (1:6) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and polishing complete all as specified.
M&L machine cut Kota stone slab 18 to 20 mm thick as in riser to step including 10 mm thick rendering in CM (1:4) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and polishing complete all as specified.
S&F pressed steel frames size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete as specified.
S&F pressed steel frames size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete as specified.
S&F Flush shutters 30mm solid core construction, with block board core and plywood face panels, commercial type on both sides
M&L for 2nd class hardwood glazed and skeleton shutters, 35mm thick, open rebated and prepared to receive glass, gauge, etc., divided into squares, with plain, chamfered or rounded, mitered and rebated sash members, any numbers and mited beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a) supplied and fitted to chowkats
S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples
M&L Preparation of New surfaces of wood or wood based materials of any description not other wise described, over 10cm width or girth and applying Two coat of synthetic enamel paint, incl one coat Primer complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30mm thick (stylel) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat molded plain colour PVC "C" channel having a VC sheet strip of 20mm width stuck inside with solvlent cement for stiles and plain colour,PVC sheet for top rail, lock rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stlyles and rail with suitable PVC sheet beading and joined together with solvlent cement and fixing in the frame of site as per specification and drawing given in page No 146 of SSR Pt-II (2004) (make Raj shree or equivalent)
S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, S&F in opening as per specification & drawing complete all as specified.
S&F 150mm long aluminium anodised barrel tower bolt of extlruded section
S&F Stainless steel butt hinges medium weight, 100mm long complete all as specified and directed.
S&F butt hinges 100 mm size heavy weight cold rolled mild steel complete all as specified and directed
S&F Continuous (piano) hinges, width of flaps 30mm mild steel, bright finish or electrogalvanised
M&L for 150mm long extructed aluminium handle fabricated type complete all as specified and directed.
S&F aluminium alloy anodised sliding door bolt with hasp and stapple (bolt type) and fixing clips of sheet cast or extruded section with fixing bolts and sliding bolt of extruded section 300mm length & dia not less than 12mm with & including 6 Nos of bolts complete all as specified and directed.
S&F aluminium powder coated framed windows, any pattern, fixed/ side hung/ sliding three track, powder coated aluminium sections of approved make, with or without sash bars, suitable for 5 mm thick glazing and Aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm wire guaze, including necessary rubber packing, joining cleats, glazing clips, aluminium snap beading, handles, locking arrangement setc, frame of window should be not less than 1.5 mm thick section complete all as specified and as directed. Note :Rates include all glazing /aluminium wire cloth, rubber packing, jointing cleats, glazing clips, aluminium snap beading, locking arrangements, handle etc.
S&Faluminium anodised ventilator with fixed aluminium frame of size 65 x 40 x 1.98mm thick fixed in vertical position with aluminium vertical members and half portion to be provided with 4mm thick pin head glass and remaining portion to be louvered using 4mm thick pin head glass and louvered portion covered with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm incl necessary channel frame work, including rubber gasket and aluminium beading complete all as specified.
S&F mild steel bars conforming to Fe 290 Gde E-165 as in guard bars or similar works including welding etc complete all as specified.
S&F for Framed work as in doors or gates of angle or other section conforming Fe410-W(Gde E-250) quality A with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; MS hand rails, balusters etc also fastening and fixing complete
S&F 110mm bore PVC pipe single socket in any length laid in trenches and floor complete all as specified and directed.
S&F 75 mm bore PVC pipe single socket in any length laid in trenches and floor complete all as specified and directed
S&F PVC (SWR) vent cowl 75mm bore
S&F PVC bends any radius 110mm bore
S&F PVC bends any radius 75mm bore
S&F PVC (SWR) 110mm dia branch piece, single ‘Y’ double or unequal
S&F PVC (SWR) 75mm dia branch piece, single ‘Y’ equal or unequal
M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified.
S&F 25mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed as specified and directed
M&L for water proofing treatment to roofs by providing 10mm thick screed in CM 1:3 mixed with & including water proofing compound @ 3% by weight of cement & applying one coat of bituminous primer @ 0.30 kg/sqm & laying APP based polymer modified membrane with polyster non woven reinforced of weight not less than 3 kg/sqm 3mm thick with polythene finished sealing with side over laps of 75mm & 100mm laps at the ends of membrane by torch application method & applying two coats of aluminium paint as per the makes approved by the Engr-in-Charge.
INTERNAL WATER SUPPLY AND SANITARY WORKS
S&F PVC floor trap with grating including jointing waste pipe in runlead 75mm dia fixed in jointing with solvent cement complete as per direction by Engr-in-Charge.
S&F vitreous china water closet Squatting Orissa patern white size 580 x 440mm with integral foot rest with P or S trap including, fush pipe etc complete all as specified.
S&F CP health faucet fixed to water closet any type of WC complete all as specified and directed.
S&F vitreous china wash basin, white flat back size 550 x 400mm including waste pipe, brackets and cutting for and pinning in ends of brackets or errecting stand but excl taps, chain and plug complete all as specified and directed.
S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long
S&F ibrass CP shower rose 125mm size with or without swivel joint and fixing to steel pipe
S&F C.P towel Rail 60cm long ‘D’ type 20mm dia complete all as specified
S&F for steel water tubing medium grade galvanised incl short length fixed to wall ceiling or laid in floors with all fittings (Such as bends, elbow, tee, short pieces, connections back buts dimnishing pieces, caps and plugs union etc) of 15mm bore complete all as specified
All as per srl item No 62 above but 20mm bore and -ditto-
S&F stop valves/ gate valves/ angle cock 15mm borefancy type chromium plated screwed dowh gigh pressure, brass polished finished with crutch or butterfly handles screwed both ends for iron pipes or for unions and fixed complete all as specified and directed
All as per item No 64 but concealed type with long shunk and cup
S&F CP bib taps cost copper ally with crutch or butterfly handles screwed for iron pipe or for brass derrule and fixed to 15mm bore pipe complete all as specified and directed
S&F low density PVC connection commercial quality 450mm long incl PTMT nuts at both sides of 15mm bore and fixed complete all as specified and directed.
S&F pillar taps cast copper alloy with capstan head, chroumium plated fancy type. Screwed down high pressure with or w/o lettered "Hot" or "cold" with long screwed shanks and fly nuts of 15mm bore complete.
S&F PVC flusing cistern low level 10 Ltr capacity of approved make including fixing of brackets connection to WC with CI brackets and making good disturbed area complete all as directed.
S&F 1000ltr Rotational moulded polyethlene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I 1000 litres capacity complete all as specified and directed.
M&L15mm ball brass valves, high pressure with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed.
M&L Salt-glazed stoneware gully trap 125 x 100 mm, setting and jointing with solvent cement
Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exc 10 cm girth on brick walls complete all as specified and directed
S&F 40mm dia PVC waste pipe flexible 750mm long including nut washer cup bracket complete all as specified and directed by Engr-in-Charge
M&L 32mm dia low density poly ethylene pipes (LDPE) of pressure rating 6Kgf/cm2 fixed complete to wall, ceiling or in floors etc
S&F kitchen sinks made of stainless steel 1mm thick with drainage board over all size 915mm x 460mm bowl size 410mm x 330mm x 160mm fixed in repairs complete all as specified and directed by Engr-in-Charge
ROAD AND PATH
Surface dressing in soft/loose soil n exc 15 cm deep trimming of natural ground (removing vegetation/ shurbs/ brushwood). Undergrowth and carring away rubbish to a distance of 50 metre complete all as specified and directed.
M&L for precast cement concrete Type B1 1:2:4 (20mm graded aggregate) in appex stone/ kerb stone with plain fair faces including chamfers, weathering throting etc and set in cement mortar 1:4 complete with joints to math size and shape as approved by Engr-in-Charge
M&L 100mm thick cement concrete type D2 1:4:8 (40mm graded stone aggregate) incl necessary formn work as in sub base of path complete all as specified
M&L sand filling 50mm thick over floor or in foundations incl well ramming complete all as specified and directed.
M&L for 60mm thick machine pressed pre-cast coloured designer type concrete inter-locking paver block any shape and size conforming to IS 15658-2006 of 80mm thickness, M-35 grade with grey cement and pigment
SEWAGE DISPOSAL
Excavation in trenches n. exc 1.5mtr deep & wide and getting out in any type of soil and n. exc 10sqm on plant complete all as specified and directed.
M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate in foundation, filling, mass concrete complete all as specified and directed.
Returning, filling in, including, spreading, levelling, watering and well ramming in layers n. exc, 15 cm
Removing excavated material n. exc 50m and depositing where directed at a level n. exc 1.5m above the starting point
M&L brick work with sub class "B" old size bricks straigth or curved on plan exc 6m mean radius built in CM (1:4) complete all as specified.
M&L half brick thick brick work with sub class "B" bricks straigth or curved on plan exc 6m mean radius built in CM (1:4) complete all as specified.
M&L for 15mm thick cement plaster in cement mortar 1:4 on concrete or brick surface and finished even and smooth w/o using extra cement complete all as specified and directed. (Water proofing compound measured and paid seperately)
M&L for integral water proofing compound
M&L for PCC (1:2:4) type B-0 using 12.5mm graded crushed stone aggregate as in coping/ benching in man hole etc, finished even and smooth using extra cement incl necessary form work
M&L for PCC (1:3:6) type C-2 (Using 40mm graded stone aggregate) to bed of drain pipe incl. packing under and haunching against the pipe after they are laid and tested for 150mm bore complete all as specified & directed.
M&L for laying and jointing RCC Class NP-2 drain pipe with collars of internal dia 150 mm complete all as specified and directed.
S&F factory made 50mm thick precast man hole cover, Size 1200mm x 300mm
S&F factory made 50mm thick precast man hole cover, Size 600mm x 300mm
M&L for cutting into existing manholes for connecting new drain pipe making good to pipe & rendering cutting out existing benching for and forming branch channel (1/2 round or ¾ in section) in cement concrete 1:2:4 type B-1 smooth finish and reforming benching as required complete for 150mm internal dia pipe all as directed.
INTERNAL ELECTRIFICATION
M&L for modular point wiring complete with 1.5 Sq mm single core PVC insulated but unsheathed multistranded copper conductor FR-LSH cable (RYBN) 1100 volts grade drawn through and including non metallic rigid PVC heavy duty concealed conduit with wall thickness not less than 1.8 mm including conduit accessories like bends, tees junction boxes, etc fixed concealed/ recessed in wall or ceiling etc including 1.5 Sq mm, single core, PVC insulated but unsheathed multi stranded copper conductor FR-LSH cable (Green) 1100 Volts grade as earth continuity wire connected to earth dolly and including modular sunken galvanized terminal boxes of same make of switch/ socket/ regulator with sleek and curvy cover plates, for mounting of modular switches, sockets, fan regulators complete for the following :-
(a) One light/ Exhaust fan point controlled by one switch.
(b) One fan point controlled by one switch.
(c) One light point controlled by two, two way switches.
(d) One socket outlet 6 amp controlled by one switch on the same board with other switches.
(e) One socket outlet 6 amp controlled by one switch on independent board.
(f) One bell point controlled by one bell push.
Point wiring with 1100 volts grade PVC insulated FR-LSH multistranded copper conductor cable 2.5 sqmm (Phase - Red/ Yellow/ Blue, Neutral - Black) and earth continuity conductor 2.5sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20mm dia ISI marked ivory colour with all conduit fittings/ fixing accessories and modular sunken box with top plate/ frame of same manufacture for one 16 amp socket outlet Modular type for controlled by one switch on independent board complete.
S&F angle holder, insulated polycarbonate body with back plate complete. Make- Havells Reo/ Anchor Penta PC/ SSK/ CONA as approved.
S&F modular switch one way 6 amp 1 module all as approved.
S&F modular switch one way 16 amp 1 module all as approved.
S&F modular switch two way 6 amp 1 module all as approved.
S&F modular bell push, 6 amp, 1 module.
S&F modular socket 6/16 - 2/3 pin combined 2 module all as approved.
S&F modular socket 6 amp 2/3 pin combined 2 module all as approved.
S&F modular hum free electronic step fan regulator, 100 watt 2 module all as approved
S&F bell multi music type, AC, 240 volts complete.
S&F ceiling rose 6 amp, 3 plates polycarbonate body complete.
M&L for submain wiring alongwith earth continuity conductor with PVC insulated FRLSH multistranded copper conductor cable (Phase - Red, Neutral - Black, Earth - Green) drawing into and including concealed rigid non metallic PVC conduit, medium grade, ISI marked ivory colour 20mm dia alongwith accessories of nominal sizes 2 x 6 sqmm + 1 x 6 sqmm earth continuity conductor complete.
M&L for submain wiring alongwith earth continuity conductor with PVC insulated FRLSH multistranded copper conductor cable (Phase - Red, Neutral - Black, Earth - Green) drawing into and including concealed rigid non metallic PVC conduit 20 mm dia, medium grade, ISI marked ivory colour alongwith accessories of following nominal sizes 2 x 4 sqmm + 1 x 4 sqmm earth wire complete.
S&F LED batten (4 Ft) indoor decortive aluminium extruded T5 LED battens duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficacy of 100+ lumens per watt and total power consumption not more than 20watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a color temperature of 6500K, CRI>80, THD < 10% and PF > 0.95 complete.
S & F LED fixtures 8 watt including connection.
S&F MCB distribution board powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required with following ratings & ways:-
SPN, 240 volts, 8 ways.
S&F MCB distribution board ETPN, 415 volts, 4 ways powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required.
S&F MCBs as per load requirement 'C' series of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of following ratings:-
(a) Single pole 6 to 16 amp as approved.
(b) Double pole 32 amp as approved.
(c) Four pole 63 amp.
S&F air ventilation fan 250 mm in toilet in rectangular in shape, PVC body, white colour 230V including louber shutter complete all as specified and directed.
S&F in exhaust fan in kitchen of 230 mm sweep, with bird protector heavy duty motor, double ball bearings, 510 CMH, single phase, 1350 rpm, powder coated metallic finish blade 3Nos, noise level 40-45 dB, 230V, 40 Watt, 50Hz, with louver shutter and mounting acessories including making openings for exhaust air through brick wall and making good by plastering rendering etc around the wall openings complete all as directed.
M&L for earthing with galvanised steel earth plate electrode 600mm x 600mm x 6mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of steel bolts, nuts, check nuts and washers all as shown in electrical plate no 5 connected to earthing test point all as specified or indicated including testing on completion with and including 15 mm bore light grade G.I. protection pipe (upto 7.5 metre beyond outer edge of earth pit) PCC pit in mix 1:3:6 type C1 with RCC 1:2:4 type B-1 40 mm thick cover reinforced with 6mm dia M.S bars 3 nos both ways with lifting hook made out of 6mm dia bar, watering arrangement with funnel and wire mesh and 20mm bore light grade G.I. watering pipe, common salt and charcoal filling, necessary excavation and earth work complete.
S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230V, 1200 mm sweep, min air delivery 210 CFM complete all as specified and directed.
HOT WATER SUPPLY
S&F water heater 25 litre capacity BEE star rating 5, vertical pattern in approved colour, heating element 2.0 KW, adjustable temperature setting knob for temperature setting between 20 C to 75 C, outer tank made of non metallic engineering plastic, inner tank made of extra thick superior cold rolled steel provided with high density PUF insulation complete and with all fitting and fixing accessories including PVC pipe connection complete
EXTERNAL ELECTRIFICATION
Supply, laying and testing of LT UG cable, XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sqmm 4 core complete all as specified and directed.
Excavation in soft/ loose soil in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth and getting out complete.
Returning filling with earth obtained from excavation including spreading watering and consolidation in layers not exceeding 25cms thick complete.
Removing surplus soil to a distance not exceeding 50m and depositing at a level not exceeding 1.5m above the starting point complete.
S&F steel tubes light grade galvanised with all fittings fixed to walls/ floors/ poles/ road crossing etc of 40mm bore complete.
M&L for sand filling in trenches with clean dry fine sand unwashed including gently punning around cables complete.
Supplying and laying old size bricks, common burnt clay building bricks sub class 'B' designation 75 laid in trenches over sand for cable protection complete.
Boring holes in soil for under reamed piles and getting out and disposal of soil to a distance n exc. 50m for a pipe of dia 40mm in size complete.
EXTERNAL WATER SUPPLY
Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m deep in soft/ loose soil including forming sides and bottom surface to required levels/ slops/ gradients and getting out complete.
Returning, filling in trenches including spreading levelling, watering well, ramming in layers n.exc 25 cm in soft/ loose soil complete.
Removing excavated material to a distance n exc 50m and depositing at a leve n exc 1.5m above starting point complete.
M&L for galvanized iron water tubing medium grade ISI marked with all fittings laid in trenches for the 20 mm bore complete.
Cutting existing steel tubing for alterations or aditions of pipe size 40/50 mm bore and screwing complete.
M&L for stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe 20mm bore complete.
M&L for gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe 50mm bore complete.
S&F steel tubes light grade galvanised with all fittings fixed to walls/ floors/ poles/ road crossing etc of 40mm bore complete.
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .