PROVN OF GUARD ROOM (2 PLUS 6) WITH ATT TOILET AT MAIN GATE TELEPARA COMPLEX AND SPECIAL REPAIR FOR REPLACEMENT OF OLD UNSV GI PIPE LINE AND CONNECTED ITEMS AT SOUTH ZONE TELEPARA AND ADDN/ALTN OF TOILET IN BLDG NO P-8(ADM BLOCK) AT BINNAGURI MIL STN

Amount

Schedule 'A'

Surface excavation not exceeding 30 cm deep and averaging15 cm deep and getting out in soft/loose soil complete all as specified and directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m depth for foundation etc or for shafts, wells cesspits manholes pier holes etc not exceeding 10 sqm on plan and not exceeding 1.5 m depth in soft /loose soil etc complete all as specified and directed.

M&L for PCC 1:4:8, type D2 (using 40 mm graded agg) as in foundation, filling and mass concrete complete all as specified and as directed.

Use and waste formwork to sides of concrete foundations, footings, bases of columns, raft and matt beams sides and soffits (if any) of foundation and plinth beams; and similar work ; vertical or to batter ,flat complete all as specified and as directed

M&L for RCC M25 (Design mix) in foundations, including rafts, footings, foundation beams, plinth beams; bases for columns,etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

Use and waste formwork to sides of pillars. posts. struts. piers. columns and stan-chions for fair finished surfaces of concrete, square complete all as specified and as directed.

M&L for RCC M25 (Design mix) in columns, pillars, piers, posts and struts complete all as specified and directed.

Form work to sides and soffits of floor or roof beam, beam hauchings, girders, bressummers, lintels, cantilevers, shelves, for flat fair finished concrete surfaces complete all as specified and directed.

M&L for RCC M25 (Design mix) in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed..

Form work to chullah hood, chajjas, troughs and similar items including edges etc for rough finished flat concrete surface complete all as specified and directed.

M&L for RCC design mix M-25 using 20mm graded aggregate as in chajja complete all as specified and as directed.

Form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200 mm thick (horizontal or sloping) for rough finished flat surface of concrete complete all as specified and directed

Use and waste the formwork to edges of concrete exe 10cm n.exe 20cm wide for flat fair finished surface complete all as specified and as directed.

M&L for RCC M25 (Design mix) in slabs supported on walls, beams, columns and Chhajja in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

M&L for mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and as directed.

S&F mild steel bars TMT 6 mm to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for coloumn , hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality confirming to complete all as specified and as directed.

All as per Ser item No 15.00 here-in-above, but 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders complete all as specified and as directed.

Returning filling in including spreading leveling watering and well ramming in layers n exc 25 cm in soft/loose soil complete all as specified and as directed.

Removing excavated material n exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified and as directed.

M&L for Brickwork with subclass B brick straight and curved on plan to exc 6 m mean radius built in 1:6 cement mortar complete all as specified and as directed.

M&L for half Brickwork with subclass B brick straight and curved on plan to any radius built in 1:4 cement mortar complete all as specified and as directed.

M&L for Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and as directed.

M&L for Treating the soil under plinth protection at the rate of 5.00 litre of emulsion per Sqm of the of surface area complete all as specified and as directed.

M&L for Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and as directed.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M & L for 50 micron thick polythene film laid in floor complete all as specified and as direcetd.

M&L for hardcore of gauge not exc 63mm, deposited, spreading and leveling in layers not exc 15cm thick, watered and rammed to true surface with broken stone or boulder complete all as specified and as directed.

M&L for 75 mm thick Cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base of floor, sub-bases etc for receiving the toping layer finish the surface even & finished rough to receive complete all as specified and directed.

M&L for 40 mm thick PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in floor finished fair and even as in flooring witrhout using extra cement complete all as specified and directed.

M&L for rendering 20 mm thick in two layer of (10+10) mm thick each layer in CM 1:4 and the top layer shall be mixed with WPC as per manufacturer's instructions on brick work or concrete surfaces of wall and finished even and fair complete all as specified and directed. Note-WPC shall be measured and paid seperately under relevant item of this schedule.

M&L for rendering 15 mm thick in CM 1:6 on fair faces of brick or concrete surface of wall and finished even and fair with out using extra cement complete all as specified and directed.

M&L for 5 mm thick rendering on fair faces of concrete surfaces as in ceiling,soffits of slab in CM (1:3) finished even and smooth (without using extra cement) complete all as specified and as directed.

M&L for preparation of new plastered surface and applying two coats of cement base paint over one coat of alkali resistant primer on wall etc complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat alkali resistant primer applied over 1-2 mm thick wall putty complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of ceiling and apply three coat of white wash complete all as specified and directed.

M & L Non - skid Ceramic tiles(colour) 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:6 etc complete all as specified and as directed.

M&L for 350x250mm/450x350 glazed ceramic coloured tiles in vertical surface not less than 7 to 8 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar (1:4) complete all as specified and as directed.

S&F pressed steel door frames of size 125 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc including one shop coat of priming complete all as specified and directed.

S&F 35 mm thick second class hard wood rail and style plain framed factory made paneled shutter (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS : 1003 (part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

Supply and fixing 2nd class hard wood (SAL) factory made 35mm thick glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc.(without sash bars) edges of framing, plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc. with sizes of members of shutters as specified in para 8.24(a) of SSR 2009 (Part I), complete all as specified and directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars, dovetailed or welded complete all as specified including providing one shop coat of zinc chrome primer complete all as specified and as directed.

All as per item No. 41 here-in-before but without glazing bars for gauzed shutter complete all as specified and directed including providing one shop coat of zinc chrome primer complete all as specified and as directed.

S & F steel ventilators with top hung shutter including hinges, steel peg stay, including one coat of shop coat of Zinc Chrome primer complete all as specified and directed

S&F 4 mm thick sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane, complete all as specified and directed.

Supply & fixing of figured glass 4mm thick, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and as directed by Engineer-in-Charge.

S&F galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and as directed.

S&F factory made soild panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supplying & fixing in the frame at site as per specification complete all as specified and directed.

S&F 100mm long stainless steel butt hinges medium weight with stainless steel pins complete all as specified and as directed.

S&F for aluminum anodized barrel tower bolts of extruded section 200mm long, ISI marked, complete all as specified complete all as specified and directed.

S&F extruded aluminium alloy handles, fabricated type., anodised,150 mm complete all as specified and as directed.

S&F 250 mm length of bolt aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed by Engr-In-Charge.

S&F 150 mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F mild steel 300 mm, ordinary rat tail rod pattern springs including roller and roller plate complete complete all as specified and directed.

M&L for painting to new wooden surfaces of any description not otherwise described over 10cm width or girth, and applying two coats of synthetic enamel paint over one coat of pink primer including preparation of surfaces complete all as specified and directed.

M&L for preparation of new painted steel surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F vitreous china squatting pan "ORISSA" pattern of size 580x440mm white, with integral foot rests (excluding flushing cistern & flush pipe) incl provisioning of lime concrete bedding ,connection to trap flushing pipe, syphonage pipe etc complete all as specified and directed.

S&F of 10 ltrs capacity PVC valveless, syphonic action type flushing cistern, low level, white with inlet ball valve, float and handle including brackets & flush pipe of polyethylene of low or high density or PVC 32mm dia complete all as specified and directed.

S & F vitreous china Urinal, half stall type, white (including flushing cistern, flush pipe and wate pipe) complete including providing and fixing plugs , bedding urinal against wall in CM 1:2 ,securing urinal to plug with and including 60mm long brass screw, pointing around urinal back in cement ,complete all as specified and as directed.

S&F vitreous china wash basin, white flat back, size 550 x 400 mm excl taps, waste chain and plug and porcelain stopper but incl brackets, waste pipe & CP waste coupling complete all as specified and directed.

S&F 15 mm Pillar tap cast copper alloy with capstan head chromium plated fancy type screwed down high pressure with or without letter hot or cold with long screwed shank and flynuts screwed for iron pipe and fixed in repairs complete all as specified and directed.

S&F GI tubing ISI marked medium grade,15mm bore with all fittings fixed to walls and ceiling or laid in floors including testing complete all as specified and directed.

S&F GI tubing ISI marked medium grade,20mm bore with all fittings fixed to walls and ceiling or laid in floors including testing complete all as specified and directed.

S&F PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F stop valves, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions for 15 mm bore dia of pipe complete all as specified and directed.

S&F bib taps cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15 mm bore dia of pipe complete all as specified and directed.

S&F for brass chromium plated tubular towel rail, 20 mm dia, D type 60 cm long between flange complete all as specified and directed.

S & F 125mm chromium plated shower roses with or without swivel joints,any size,including fixing to steel pipe or union complete all as specified and directed.

S & F tubular towel rail 20mm dia brass chromium plated complete all as specified and directed.

S & F brass chromium plated brackets complete all as specified and directed.

S & F rotational moulded polyethylene water storage tank (cylindrical vertical type three layered with closed top)1000 litre capacity conforming to IS -127701 (1989) hoisted and fixed in position complete all as specified and directed

S&F of 20 mm dia PVC ball cock (PVC float valves) complete high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed as required to use reduser and check nut etc complete all as specified and as directed.

S&F of PVC (SWR) floor trap, plain with grating including jointing with solvent cement outer dia 75 mm cement concrete (1:2:4), type B1 including complete all as specified and as directed.

S&F 75mm bore PVC (SWR) pipes single sockets in any length with rubber ring joints fixed to wall or laid in floor complete all as specified and as directed.

S&F 75mm bore PVC (SWR) Bends including fixing clip complete all as specified and as directed.

M&L for PCC 1:3:6 type C2 using 40mm graded stone aggregate, 75mm thick in plinth protection laid in panels and finished even and fair including necessary form work complete all as specified and directed. Note : Joints 12mm wide to the full depth of PCC shall be provided at every 3 meters and at every change of direction and shall be filled with mixture of bitumen and sand 1:3 by weight. Cost of this provision shall be deemed to be included in quoted rate for concrete in plinth protection complete all as specified and directed.

Supply only integral water proofing compound conforming to IS-2645-1975 specification complete all as specified and as directed.

M & L screed bed or bedding layer 15 mm thick screed bed or bedding layer in CM (1:4) mixed with WPC as per manufacturer instruction for laying of APP membrane complete all as specified and as directed. by the Engr-in-Charge.(Note:- WPC shall be measured and paid seperately under relevant item of this schedule.)

M&L for water proofing treatment to non accesible RCC roof slab, including parapet comprising with the following courses of treatment/specified from bottom to top:- (a) Applying bituminous primer @ 0.40 Ltr per Sqm over plastered surface of roof including parapets surfaces (b) Over the priming coat laying one layer of APP based polymeric membrance of approved manufacturer, 4 mm thick of weight not less than 4.6 Kg/sqm reinforced with non woven polyster fabric of weight not less than 150 gms per Sqm. Polymeric members shall be taken to a height of 60 cm (min) and then inserted inside the groove of parapet wall and shall be finished by a membrance flashing. (c) Appluying one coat of aluminium paint on top of APP for heat resistance @ 100ml/Sqm as per manufacturer etc complete all as specified and directed. (Note :- (i) Laying APP based polymeric membrance shall be done by torch of method or as per manufacturers Instructions. (ii) A minimum over lap of 100mm and 75 mm should be made at the end and side respectively.

Demolition of brick or stone/boulder masonary work, built in cement mortar or cement lime mortar including all quions, arches, pillars, etc. but excluding precast concrete articles etc. complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M&L RCC type B-1(1:2:4) using 20mm graded aggregate in slabs supported on walls, beams, columns and Chhajja in floors, roofs, landings, balconies, canopies deck slabs and in shelves and the like complete all as specified and as directed.

M&L for Granite (of any type) tiles 18 to 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting , grinding and polishing laid over 15mm thick screed bed in CM 1:4 complete all as specified and as directed.

Taking down cement plaster on brick work wall or concrete surfaces including racking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed.

S & F in repair Bowl with cistern for coupled WC white, of size 375x650x800mm with S trap 205mm with PP soft close seat cover,hinge,fixing accessories,cistern fittings and accessories set of make jaquar complete all as specified and as directed.(CAT NO - ARS WHT 39751S250PPZ)

S&F in repair Swan Neck Pillar tap ,brass chromium plated of Make Jaquar ,flange handle controlled for wash bashin including one faucet, one check nut and washers , screwed for iron pipe 15mm bore complete all as specified and as directed

S&F of Table Top wash hand basin vitreous China, white, flat back (420x420x135mm) cutting for and pinning ends of brackets and waste coupling of PTMT for glazed ware basin etc with long screwed shanks and fly nuts,full threaded flage end bedded in white cement incl PVC waste pipe with CP/PTMT coupling for required length .of Make Jaquar (Cat No -ARS WHT 39901)

S & F in repairs Vitreous China Half stall urinal White complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement of make - Jaquar (Cat no - URS WHT 13255)

S&F in Repair Curved Shape Urinal partition with Frosted Glass of 8mm thick and Chrome Size 900mm x 450mm of Make Jaquar (CAT No - JSE CHR 810UC450X) fitted to Wall complete all as specified and as directed.

S&F in repair stop valve, fancy type chromium plated (medium) screwed down, high pressure with crutch or butterfly handle, screwed both end for iron pipe or for union of 15mm bore complete all as specified and directed.

S&F in repair PVC (SWR) 110 mm bore pipes single socketed in any length with rubber ring joints incl PVC clamp with nut and bolts laid in trenches or in floor complete all as specified and as directed.

S&F PVC in repair (SWR) 110 mm bore bends of pressure rating @ 6kgf/sqcm complete all as specified and as directed.

S&F PVC in repair (SWR) 110 mm bore vent cowl of pressure rating @ 6kgf/sqcm complete all as specified and as directed.

S&Fin repair for stainless steel soap dish best quality fixed to plugs with chromium plated brass complete all as specified and as directed.

S and F in repair health faucet connecting with 15mm dia pipe with chromium plated (CP) finishing etc complete all as specified and as directed.

S&F in repairs Bib taps fancy type cast copper alloy, chromium plated for 15mm bore pipe, screwed for iron pipes or for brass ferrule all complete as specified and as dierected.

S&F in repair CP towel ring complete all as specified and directed.

Taking up or down 20mm dia steel tubing & connection including cleaning for refixing or removal to store complete all as specified and as directed.

Taking up or down 15mm dia steel tubing & connection including cleaning for refixing or removal to store complete all as specified and as directed.

S&F in repair Powder coated aluminium louvered ventilators of size 600X600mm with glass louvers, without sash bars of aluminium sections weighing not less than 0.605kg/m for frame of size 40x20x2mm including necessary jointing cleats, glazing cleats, rubber packing , anodised aluminium snap beading,screws, anodised aluminium fittings and 5.5mm thick tinted glass fixed in panels with suitable locking arrangements including taking down of old existing steel ventilator and making good disturbed surface of wall complete all as specified and as directed.

Taking down chowkat or frame with door shutter (without taking off shutter from the frame) n.exc. 1.5 sqm each, making good disturbed surfaces and removing materials from site of work complete all as specified and as directed.

S&F of factory made solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with printed sheet ,PVC sheet reinforced with 19x19mm MS square tube and 1.2mm wall thickness complete all as specified and as directed.

S&F of Factory Made Solid PVC Door Shutter With Wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing,including3X SS but hinges100mm,2X150mm long AluTower bolts,2X125mm long Alu Handles complete all as specified and as directed.

S&F IN REPAIR 75mm long stainless steel butt hinges medium weight with stainless steel pins complete all as specified and as directed.

S&F in repair of 150 mm long Aluminium anodised barrel tower bolt of extruded section and as directed.

S&F in repair Aluminium anodiesed ,cast type door handle 150mm long complete all as specified and directed.

Dismantling and taking out old unserviceable rusted GI water mains and removal complete all as specified and directed by Engineer-in-charge for following sizes:- (a) 15 mm nominal dia. complete all as specified and directed.

(b) 20 mm nominal dia. complete all as specified and directed.

(c) 25 mm nominal dia. complete all as specified and directed.

(d) 40 mm nominal dia. complete all as specified and directed.

(e) 50 mm nominal dia. complete all as specified and directed.

S & F GI tubing medium grade ISI marked laid in trenches/laid under floor including all fittings such as elbow,union,reducer,tees,bends etc and short length complete all as specified and directed by Engineer-in-charge confirming to IS-1239 for following sizes:- (a) 15 mm nominal dia. complete all as specified and directed.

(b) 20 mm nominal dia. complete all as specified and directed.

(c) 25 mm nominal dia. complete all as specified and directed.

(d) 40 mm nominal dia. complete all as specified and directed.

(e) 50 mm nominal dia. complete all as specified and directed.

S & F GI tubing medium grade ISI marked on wall/laying on floor/ceiling including all fittings such as elbow,union,reducer,tees,bends etc and short length complete all as specified and directed by Engineer-in-charge confirming to IS-1239 for following sizes:- (a) 15 mm nominal dia. complete all as specified and directed.

(b) 20 mm nominal dia. complete all as specified and directed.

(c) 25 mm nominal dia. complete all as specified and directed.

(d) 40 mm nominal dia. complete all as specified and directed.

(e) 50 mm nominal dia. complete all as specified and directed.

Laying of old serviceable steel water tubing,as obtained from ser item No 1 here-in-before with providing all new fittings in trenches all complete as specified and directed by Engineer-in-charge confirming to IS-1239 for following sizes:- (a) 50 mm nominal dia. complete all as specified and directed.

(b) 40 mm nominal dia. complete all as specified and directed.

(c) 25 mm nominal dia. complete all as specified and directed.

(d) 20 mm nominal dia. complete all as specified and directed.

(e) 15 mm nominal dia. complete all as specified and directed.

Laying of old serviceable steel water tubing,as obtained from ser item No 1 here-in-before with providing all new fittings on floor/ceiling all complete as specified and directed by Engineer-in-charge confirming to IS-1239 for following sizes:- (a) 50 mm nominal dia. complete all as specified and directed.

(b) 40 mm nominal dia. complete all as specified and directed.

(c) 25 mm nominal dia. complete all as specified and directed.

(d) 20 mm nominal dia. complete all as specified and directed.

(e) 15 mm nominal dia. complete all as specified and directed.

Supply and fix in replacement class 1.0 gun-metal gate valves, ISI Marked, confirming to IS-778, with iron wheel head, screwed both ends of size 50 mm nominal dia. complete all as specified and directed.

Supply and fix in replacement class 1.0 gun-metal gate valves, ISI Marked, confirming to IS-778, with iron wheel head, screwed both ends of size 40 mm nominal dia. complete all as specified and directed.

Supply and fix in replacement class 1.0 gun-metal gate valves, ISI Marked, confirming to IS-778, with iron wheel head, screwed both ends of size 25 mm nominal dia. complete all as specified and directed.

Supply and fix in replacement class 1.0 gun-metal gate valves, ISI Marked, confirming to IS-778, with iron wheel head, screwed both ends of size 20 mm nominal dia. complete all as specified and directed.

Supply and fix in replacement class 1.0 gun-metal gate valves, ISI Marked, confirming to IS-778, with iron wheel head, screwed both ends of size 15 mm nominal dia complete all as specified and directed.

Dismantling existing UNSV valves pits and costruction of new brick masonary Valve pit chamber of size 600mmx600mmx600mm depth(internal dimensions) with brick work in cement mortar (1:4) , 40mmx40mmx6mm angle iron frame ,MS handle 300mm long bend to shape and riveted to MS sheet made of , Mild steel sheet cover wuith angle frame, locking arrangement , lock with keys in duplicate, steel handle ,plastering and painting etc with necessary Excavation & Earth Work including dismantling of old damaged valve pit and removing from site complete all as specified and directed.

S & F in repair for cast iron bib tap ,15mm bore screwed for iron pipes complete all as specified and directed.

S & F in repair for cast iron bib tap ,20mm bore screwed for iron pipes complete all as specified and directed.

M&L for Concealed type Point wiring with 1.5 Sqmm (nominal cross-sectional area) PVC insulated unsheathed single core malti stranded copper FRLS cable working voltage 1100 volts grade conforming to IS-694 with stranded copper conductor in including PVC conduit of adequate size having a wall thickness not less than 1.5 mm with all accessories (including cutting chases & making good the disturbed surface to its original specification) including 1.5 sq mm (nominal cross sectional area) PVC insulated unsheathed single core multistranded copper conductor FRLS cable as earth continuity conductor connected to main switches/DB's or common earth dolly complete all as specified and directed for the following :- (a) One light point controlled by one way switch 5/6 amps.

(b) One ceiling fan/Exhaust fan point controlled by one way switch 5/6 amps.

(c) One socket out let 5/6 amps point on the independent board

(c) One socket out let 5/6 amps point on the same board

All as per item No 142.00 here-in-above but wiring with 2.5 sq mm single core multistranded copper conductor for one socket out let 15/16 amps point on the independent board complete all as specified and directed

All as per item No 142.00 here-in-above but wiring with 4 sq mm single core multistranded copper conductor for one socket out let 15/16 amps point on the independent board complete all as specified and directed

S&F switch piano flush type 5/6 amps single pole one way complete all as specified and directed.

S&F in repair switch piano flush type 5/6 amps single pole one way complete all as specified and directed.

S&F socket 2 in 1, 5 Pin, 5/6 amps, white ivory finish flush type complete all as specified and directed.

S&F in repair socket 2 in 1, 5 Pin, 5/6 amps, white ivory finish flush type complete all as specified and directed.

S&F of socket outlet 2 in 1, 5 Pin 5/15 Amp multipurpose 230 volt flush type complete all as specified and directed by Engr-in-Charge.

S&F in repair of socket outlet 2 in 1, 5 Pin 5/15 Amp multipurpose 230 volt flush type complete all as specified and directed by Engr-in-Charge.

S&F switch piano flush type 15/16 amps single pole one way complete all as specified and directed.

S&F in repair switch piano flush type 15/16 amps single pole one way complete all as specified and directed.

S&F ceiling rose, bakelite, surface type, 220/240 volts, three terminals complete all as specified and directed.

S&F in repair ceiling rose, bakelite, surface type, 220/240 volts, three terminals complete all as specified and directed.

S & F lamp holder, insulated body, with back plate suitable for batten/angle fittings complete all as specified and directed.

S & F in repair lamp holder, insulated body, with back plate suitable for batten/angle fittings complete all as specified and directed.

S & F deluxe fan Electronic regulator 120/280 volts AC 50 Hzs rotary step white/ivory finish complete all as specified and as directed.

S&F LED tube light fitting 4 feet with aluminium housing & integrated driver, with high efficient LEDs 20/22 watt, with all accessories, suitable for operation on Ac, single phase 220 / 230 Volts, 50 Hz supply, complete all as specified and as directed.

S & F LED street light fitting 45 watt in aluminium PDC housing, toughened glass cover with IP66 protection complete all as specified and as directed.

S&F Sheet metal enclosure for 8 way Distribution Boards (DB’s), double door, single pole & neutral with 200 amps rated bus bar, IP-20 protection suitable for fixing MCB"S/isolators complete with and including taking down old unsv one complete all as specified and as directed.

S&F MCB Single pole and neutral 40 amps, 240 volts, ‘C’ curve, 10KA all complete as specified and as directed.

S&F MCB Single pole, 5 to 32 amps, 240 volts, ‘C’ curve, 10 KA all complete as specified and as directed.

M&L in replacement for Earthing complete with galvanised steel plate electrode of size 600x600x6.30mm thick burried directly in ground with earth pit not less than 2.25 meter deep below normal ground level with top edge of plate not less than 1.5 meter below normal ground level connected to galvanised 4 mm dia earth lead by means of nuts bolts check nuts GI washers earth wire protected by galvanised iron pipe 15mm bore (Light grade) for building LT wall panel all as directed including concrete pit in PCC (1:3:6) type CI, precast RCC cover slab of size 30x30x10 cm with one handle for lifting made out of 8 mm diameter MS bar finnel wire mesh 20 mm bore galvanised iron pipe (medium grade) for watering charcoal or coke and salt in alternate layers necessary earth work in soft/loose soil with and including taking down the old one complete all as shown in electrical plate No 3 of SSR Part I 2009 including testing on completion all as specified and directed. Note: The Rate for Taking down the old unsv Earthing shall be deemed to be included in the unit rate complete all as specified and as directed.

M & L for street light bracket made out of GI pipe light grade 25 mm dia 1.2 mtr length bent to shape and reduced to required size at top upto 1.2 mtr length by cutting, welding and well finishing including MS clamp of flat iron of size 25 x 5 mm suitable length 2 Nos complete with drilling, hole, fixing with nuts bolts and washers including painted with two coats aluminium paint over a coat of red oxide primer complete all as specified and directed.

Supply & fixing of ceiling fans with all accessories 230 V,1200 mm sweep. BEE 5 star rated conforming 2 IS 374 : 1979 complete with pre wired with 3 core cable complete all as specified and as directed.

Supply & fix exhaust fans hevy duty AC single phase 230/ 240 V of size 300 mm sweep with louver complete all as specified and directed

Supply and lay dry river sand filling for under ground cable protection with a layer of 8cm deep before laying and 15cm covering above the top edge of cable after laying complete all as specified and as directed.

Supply and laying sub class B bricks of size 25cmx12.5cmx7.5cm (+/-10% tolerance) for protection of UG cable with width equal to length of bricks as mechanical protection laid dry and flat complete all as specified and as directed.

Supply, laying, jointing & testing in trenches or passing through pipe, 1100 volts grade, XLPE insulated , FRLS screened, PVC bedded, galvanized steel strip or wire armoured LT electric power UG cables, heavy duty with stranded aluminium conductor of cross sectional area 16 sqmm 2 core with and including all fixing & connecting accessories such as Alluminium cable lugs, cable gland, nut, bolts, washer etc complete as specified and as directed. (NOTE: Earthwork & Excavation, GI pipe, bricks for protection etc shall be measured and paid separately under relevant items of this schedule 'A').

S&F MCCB 3P 16 KA of rating 100 A fixed type setting including electric connection complete all as specified and as directed.

Supply and fix Gun metal ,globe Gate Valves with iron wheel head of 25 mm dia bore complete with all accessories complete all as specified and as directed.

Supply and fix Gun metal ,globe Gate Valves with iron wheel head of 20 mm dia bore complete with all accessories complete all as specified and as directed.

Constuction of new brick masonary valve pits of size 600x600x600 mm (internal dimension) with brick work in CM1 1:4 40mmx40mmx40mm angle iron frame , MS handle 300mm long bent to shape and riveted to MS sheet including excavation and earth work, Concrete work 3.15mm thick Ms sheet cover with locking arrangement hinges and handle rendering work, painting to all steel surface with two coat red oxide primer complete all as specified and as directed.

M & L for 75mm thick PCC 1:2:4 type B-2 (using 40mm graded aggregate) for floor, footpath etc complete all as specified and directed.

M&L chequred cement concrete tiles 30cmx30cmx25mm thick set jointed and pointed in neat cement slurry in floors set with grey cement and no pigment laid over 20mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.

M & L for providing cement concrete type B-2(1:2:4) ( 40 mm graded agg ) in surface channels and drains complete all as specified and as directed.

M & L for PCC 1:2:4 type B-1 (20mm graded aggregate) as in providing cement concrete lintel up to 1.5 clear span ,cills, steps,parapets and railing upto 60cm in height,coping,kneelers,apex stone,bed plates,kerbs complete all as specified and as directed.

M&L for 15mm thick rendering in cement mortar (1:4) on fair faces of brick walls or concrete surfaces in mixed with water proofing compound by weight of cement or as per manufacturer instructions, finished even & fair without using extra cement complete all as specified and as directed.

Providing precast cement concrete in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain with plain fair faces, including chamfers weatherings throating etc. and setting in mortar complete with joints to match, type B-1(20mm graded aggregate) Set in CM1: 6 complete all as specified and as directed.

M&L for concrete bed in cement concrete 1:3:6 type C2 to drain pipes of 150 mm bore including packing under and hunching against the sides of pipes after they are laid and tested complete all as specified and directed.

S&F for SGSW drain pipe of size 150 mm dia (grade A) laid in trenches and jointed in cement mortar (1:1) complete all as specified and directed

M & L for on site hume pipe septic tank designed to carry sewage and sullage water ,excavation in any type of soil, PCC 1:4:8 below foundation ,vent shaft ,connection etc.,complete for 10 users.complete all as specified and directed

M & L for sokage wells size 1.8M dia x 3.0M effective depth and excavation ,in any type of soil ,foundation in PCC 1:3:6,walls of honeycombed masonary with top ring of M25 concrete including intercepting chamber and screen chamber made of brick masonary in CM , RCC cover slab in M25/ SFRC cover ,interconnecting pipes of RCC/DWC complete filled with brick bats of size complete all as specified and directed

M&L for concealed sub main wiring alongwith eath wire of size of 2 run of 6.00 sqmm + 1 run of 6.00 sqmm (nominal cross-sectional area) PVC insulated unsheathed single core cable of working voltage 1100 volts grade with stranded copper conductor drawn in PVC rigid non- metallic conduit complete all as specified and as directed. NOTE : (i) Three run of submain wiring cable alongwith 25 PVC conduit pipe shall be measured as one unit length.

S & F IP 20,class I , LED Micro light fitting 1x10 W ,(or nearest next higher waattage) 5700K, waal/surface mounted with aluminium housing 2feet long ,integerated type, with high efficiency PMMA diffuser,intgrated high efficiency electronic driver & surge suppressor of 2KV or more luminaire efficiency > 95 lumens/Watt ,power factor > 0.90 ,operating range -140 to270V ,50 Hz fixed with 02 Nos of PVC round/square blocks ,screw etc complete including 01 no 10W LED lamp with all accessories internally prewired and including connecting up with andincluding twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed

L. B. SHARMA

S. G. CONSTRUCTION

N K Construction

S S SHARMA