Road safety works from Ch. 35.929 Km (Jhumur Bridge) to Ch.88.60 Km (Hasimara)

High Mast Solar Light Supplying, Installation, Testing and commissioning 12.50 m High Mast solar light made up with S355JO/JR as per BSEN 10025 or equivalent having pole dimension of Top dia - 150mm, bottom dia - 360mm, thickness - 3 mm base plate - 520mm x 520mm x 25mm fixed on parapets on RCC foundation at Road Flank, and fitted with 6 nos 60 watt, 12 Volt solar lamp, 110- 130 Lumen/watt, IP-65/IP-66 for LED, Colour Temperature- Cool day light (5700K ±500K) with 150 Wp or above SPV Module , not less than 12.8 Volt - 60 Ah Lithium Ferro Phosphate solar battery including erection, insulation and all complete including all materials

Type - B, "THRIE" : Metal Beam Crash Barrier Providing and erecting a "Thrie" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 85 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 2 m high with 1.15 m below ground level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a space of channel section 150 x 75 x 5 mm, 546 mm long omplete as per clause 811

Painting Two Coats on New Concrete Surfaces Painting two coats, after filling the surface & applying a sealing primer, with synthetic enamel paint in all shades on new plastered concrete surfaces as per MORT7H's specification 03.6.2. (Reference to MORT&H's specification 803).

Painting on Steel Surfaces :- Providing and applying two coats of ready mix paint of approved brand on steel surface after through cleaning of surface to give an even shade (Reference to MORT&H's specification 803).

Tack Coat Providing and applying tack coat with Cationic bitumen emulsion (RS1) complying with IS:8887 using emulsion pressure distributor on the prepared bituminous/granular /cement concrete pavement surface cleaned with mechanical broom and high pressure air jet (Reference to MORT&H's specification clause 503). On bituminous surface @ 0.25 kg /sqm.

Bituminous Concrete Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder of approved grade@ 5.4% (min) for Gr.-2 , as per table 500-17, and mix design done as per table 500-10 and job mix formula as per cl. 505.3.3 and filler (Cement /hydrated lime /Rock dust ), transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory tandem roller and with pneumatic tyre roller of 12 to 15 tonne weight with a pressure at least 0.56 MPa as directed by E-I-C to achieve the desired compaction as per clause no 507.3.5 complete in all respects ref. to MORTH specification clause No.507. for Grading-2 ( 13.2 mm nominal maximum aggregate size), Layer thickness: 40mm

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes (Reference to MoRT&H's specification 803).

90 cm equilateral triangle

60 cm circular