Integrated Permanent Hawker Zones for Regulated Vendor Activity near Major Pushkaram Corridors 4 Priority zones along the Bund Road and ghat approach corridors (Phase -1). (Under Pushkaram Funds) (2nd Call)

Dismantling of existing structures like culverts, bridges, retaining walls and other structures comprising of brick masonry, including disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specification Clause 202 MORD / MORTH (Brick / Tile Work)

Construction of granual surface course by providing well graded material like 2.36mm to 5mm size HBG Material,spreading in uniform layers with motor grader on prepared surface,mixing by mix in place method with rotavator at OMC,and compacting eith three wheel 80-100 KN static roller/vibrator roller 80-100 KN capacity to achieve the desired density,complete as per technical specification clause 402 MORD.

Supply of precast concrete blocks for paving of M -40 grade and thickness not less than 80mm for Medium Traffic Areas confirming to IS 15658: 2006 in all shapes and designs as per the manufacturers specification and labour charges for laying & fixing of precast concrete blocks for paving of all grades, any thickness, all sizes & shapes including all labour charges for loading and unloading, laying to desired lines and levels complete excluding cost of cement, sand, water, electricity etc., complete as per S.S. and as directed by the Departmental Authorities.

Supply and fixing of Ornamental Vaccume Dewatering pimple finished splay CC Kerb of make not less than M40 Strength of size 600 x375 x 100 mm thick with bottom thickness of 100mm upto height of 300mm and top width of 50mm thick chamfering with 45 degree at starts at 300mm height to 375mm(as per drawing) can be laid on existing CC Bed jointing with C.M(1:3) excluding seigniorage charges including cost and conveyance of all materials to work spot,all labour charges etc., complete as per ss and as directed by the site engineer.

Providing and constructing RCC M25 vending counter plinth of size 2400 x 900 x 600 mm with 18 mm granite top, including reinforcement, formwork, plastering and finishing etc., complete as directed by the site engineer.

VRCC M25 and above grade

Supply, Delivery, Laying and fixing of Granite Stone

Design, fabrication, supply and erection of standardised vending canopy module of size 3.0 m x 3.0 m x 2.7 m clear height, comprising 75 x 75 x 3 mm MS SHS columns, 50 x 50 x 3 mm SHS rafters and purlins, 0.5 mm pre-coated profile roofing sheet with edge flashing, and a 450 mm high ACP fascia band carrying UV printed vendor number, zone name, licence QR code and Pushkaram branding - hot-dip galvanised and PU painted in the approved identity colour

Supply, erection, testing and commissioning of 5.0 m high octagonal galvanised street light pole with 60 W LED luminaire (IP66, 130 lm/W), single-arm bracket, RCC M25 foundation, junction box, earthing and looping including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the site engineer.

Supply and installation of individual bay electrical point comprising MCB, energy sub-meter, 2 nos. 6/16 A sockets, 1 no. LED batten and FRLS wiring in PVC conduit from the zone distribution board, including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the site engineer.

Supply and installation of zone electrical distribution board with MCCB incomer, SPD, energy meter, RCCB protection and IP65 outdoor enclosure with mounting pedestal including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the site engineer.

Supply, laying and jointing of 63 mm dia. HDPE PE-100 PN-8 water supply main with valves, specials, thrust blocks and connection to the existing RMC distribution network including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the site engineer.

Providing and constructing a shared water point cum wash unit with 3 taps, stainless steel sink, RCC platform, splash apron and connection to the drainage system including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the site engineer.

Providing and constructing RCC M25 covered drain of internal size 300 x 400 mm with precast RCC cover slabs, incl. excavation, PCC bed, plastering and connection to the existing storm water / sewer network including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the site engineer.

Providing and constructing a grease trap cum silt chamber of internal size 1.2 x 0.9 x 1.0 m in RCC M25 with removable cover, for food-vending bays including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the site engineer.

Supply and installation of twin-bin segregated waste station (2 x 120 litre HDPE bins) on a powder-coated MS stand with segregation instruction graphics including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the site engineer.

Supply and fixing of illuminated Hawking Zone identification totem of size 900 x 2400 mm in MS box section with ACP cladding, UV print, internal LED illumination and RCC foundation, displaying zone name, permitted vendor count, operating timings and grievance contact including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the site engineer.

Supply and fixing of NO HAWKING ZONE regulatory sign of size 900 x 600 mm in 2 mm aluminium with Class-I retro-reflective sheeting on 100 NB GI post with RCC M20 foundation, as per the zoning plan under the Street Vendors Act, 2014 including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the site engineer.

Supply and fixing of bilingual Do's and Don'ts / vendor code-of-conduct board of size 1200 x 900 mm in 3 mm ACP with UV print on MS frame, covering hygiene norms, price display, waste segregation, footpath obstruction and emergency lane discipline including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the site engineer.

Providing thermoplastic road marking of 2.5 mm thickness for vending bay demarcation, pedestrian movement lane, emergency access lane and no-vending hatching, with reflective glass beads as per IRC 35 including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the site engineer.

Providing Plain Cement concrete (1:4:8) (Cement: fine aggregate: coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, on all materials including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15cm layers finishing top surface to the required level curing etc. complete for finished item of work (APSS No. 402).

Supply and fixing of MS bollards of 900 mm height and 100 mm dia. filled with concrete, hot-dip galvanised and PU painted, for separating the vending platform from the carriageway including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the site engineer.