Road Signage Work on Bhuresi Karethi to Sarkada Road in district Rampur.

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing (as per IRC:67-2012 clause 14.60)

Cautionary Sign- T-Junction/X-Junction Sign & zebra etc (90 cm equilaterial triangle)

Single Chevron (50x60cm)

Stop Sign Board (90 cm hight Octagonal)

Speed Limit (60 cm circular)

Cat Eyes (raised pavement marker). Supply & fixing of moulded cats eye with shank raised pavement markers made of polycarbonate moulded body and reflected pannel with micro prismatic lens capable of providing total internal reflection of the light entering the lens face conforming to ASTMD for 4280 type 'H' and complying to specification of categories a of MORTH CIRCULAR NO RW/NH/33023/10-07-DO-III 11-06-1997. The height, width and length shall not exceed 20 mm 150 mm and 105 mm and with minimum relfective area of 13 sqcm. and the each side slope to the base shall be 350. Fixing will be without nails but using with twin polymer shanks bitumen adhesive on bitumen roads as per manufacture's recmmendation including site clearence etc. and complete as per direction by E/I.

Repetitive bar/ Transvers bar marking by hot appiled Thermoplastic Marking of 300 mm wide and 5 mm height, at 1000 mm apart (one set is of 6 Strips). 5 mm height is achieved through six applications of thermoplastic, applied at an interval not less than 1 hour after the previous layer gets solidified, Alternatively, made of Mastic Asphalt or any equivalent material which would provide 15 mm high As per Circular No-62 Patrank Sankhya-879 MT/Samanya Varg / 60MT/ 2019 DT. 16-01-2019

Providing and fixing post delineators made of ABS round body fitted with 2 nos 100 mm dia high reflective reflectors and mounted on MS pipe of 65 mm dia duly powder coated anti-rust and anti theft steel to be installed as per direction of Engineer-in-charge.