Tender for Providing Electric Materials and Maintenance for Nagar Panchayat Dhanora for FY 2026-27

विद्युत वार्षीक देखभाल दुरूस्तीसह साहीत्य पुरवठा करणे

LED हयालोजन 30 वॅट only material only Supplying* LED Flood light fitting of 30-40W, including lamp, with PF > 0.95,class IP 65 and above class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete per specification No FG-ODF/FLS-2

LED लाईट 5 वॅट Supplying 5W-7W, 230V integral type LED Lamp suitable for B-22/E-27 base.

LED लाईट 10 वॅट Supplying 10-12W, 230V integral type LED Lamp suitable for B-22/E-27 base.

LED लाईट 14 वॅट Supplying & erecting 14W, 230V integral type LED Lamp suitable for B-22/E-27 base.

LED flood light 50 वॅट Supplying LED Flood light fitting of 50W, including lamp, with PF > 0.95,class IP 65 and above class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete per specification No FG-ODF/FLS-2

2x1.5 sq.mm FRLSH copper PVC insulated wire

2x2.5 sq.mm F.R copper PVC insulated wire

2x4 sq.mm F.R copper PVC insulated wire

2x6 sq.mm F.R copper PVC insulated wire

2x10 sq.mm F.R copper PVC insulated wire

Supplying and erecting PVC insulated PVC round sheathed 1 sq.mm (32 no. x 0.20mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV

Supplying PVC insulated PVC round sheathed 2.5 sq.mm (50 no. x 0.25 mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV

Supplying PVC insulated PVC round sheathed 4 sq.mm (56 no. x 0.30 mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV

सर्वीस वायर 2.5 mm

सर्वीस वायर 4 mm

सर्वीस वायर 6 mm

माडयुलर स्विच बोर्ड 18 Supplying PVC Surface modular switch box with double mounting plate for 16 / 18 module duly erected.

माडयुलर स्विच बोर्ड 12 Supplying PVC Surface modular switch box with double mounting plate for 12 modules duly erected.

माडयुलर स्विच बोर्ड 6 Supplying PVC Surface modular switch box with double mounting plate for 6 modules duly erected.

माडयुलर स्विच बोर्ड 4

सन्माइका बोर्ड 8x10

Wooden Board 8x10 लाखडी पाटी

केसीग पटटी 1 इंच

केसीग पटटी 3 इंच

केसीग पटटी 4 इंच

PVC Pipe 20mm

PVC Pipe 25mm

PVC Celing Rose

PVC pipe Accessories(coubpling ,bend,T ETC)

Steel saddle Clamp

लाकडी गुजी पॉकीट /गिट्टी

3/4 inchx5 Ft earthing pipe

GIतार 6 ते 14 नंबर

GI तार 18 नंबर

PVC Gujje pocket गिट्टी

flexible conduit hose पाईप 1 इंच

Supplying power strip with one switch 6A and 4 sockets each 6A,230 V combination with surge and spike protection unit complete.

स्विच 6 amp Supplying ISI mark modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.

स्विच 16 amp Supplying ISI mark modular type switch 16A duly erected on provided plate and box with wiring connections complete.

साकेट 6 amp Supplying ISI mark modular type 3 pin 6A multi sockets with safety shutter, duly erected on provided plate and box with wiring connections complete.

साकेट 16 amp Supplying ISI mark modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting two pole metal clad changeover switch 240 V, 32 A erected on angle iron/GI frame and duly connected with suitable wire leads complete

63 amp मेन्स Supplying pole metal clad switch and fuse 415V, 63A on angle iron / GI frame as per specification no. SW-SWR/MTP.

100A मेन्स Supplying triple pole metal clad switch and fuse 415V, 100A on angle iron / GI frame as per specification no. SW-SWR/MTP.

32 amp मेन्स Supplying triple pole metal clad switch and fuse 415V, 32A on iron / GI frame as per specification no. SW-SWR/MTP.

Supplying, marking SPMCB 6A to 32A, C-series (for motor/power) in provided distribution board as per specification no. SW-SWR/MCB

Supplying, SPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification no. SW-SWR/MCB

SupplyingSPMCB 40A to 63A C- series (for motor/power) in provided distribution board as per specification no. SW-SWR/MCB

Supplying, SPMCB 40A to 63A, B- series (for lighting) in provided distribution board as per specification no. SW-SWR/MCB

Supplying, DPMCB 6 A to 32 A B- series (for lighting) in provided distribution board as per specification no. SW-SWR/MCB

Supplying, DPMCB 40A to 63A, Bseries (for lighting) in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking TPMCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking TPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying double pole isolator only switch version of miniature circuit breaker of 40A with required wiring connections and lugs etc. in provided distribution board complete

Supplying triple pole isolators only switch version of miniature circuit breaker of 40A with required wiring connections and lugs etc. in provided distribution board complete.

Supplying triple pole isolators only switch version of miniature circuit breaker of 63A with required wiring connections and lugs etc. in provided distribution board complete

Supplying triple pole isolators only switch version of miniature circuit breaker of 100A with required wiring connections and lugs etc. in provided distribution board complete.

Supplying erecting and marking four pole isolators only switch version of miniature circuit breakers of 80/100A in provided distribution board complete.

Supplying, erecting & commissioning 2 pole RCCB 16/25A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB

Supplying, erecting & commissioning 2 pole RCCB 16/25A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB

Supplying, erecting & commissioning 4 pole RCCB 16/25A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB

Providing, 4 pole RCCB of electromagnetic type with 30/100/300 mA sensitivity and having capacity of 63A complete as per specification no. SWRCCB/RCCB

साधा बल्ब 200 वॅट

साधा बल्ब 100 वॅट

पॉनटेड /अ‍ॅन्गल बल्ब हेाल्डर Supplying Ceiling rose / Batten holder / Slanting holder / hanging cord switch / hanging bell push / pendent holder bakelite base 6A. erected on filled polypropylene board or polished double wooden block/ PVC junction box.

Ceiling fan Supplying and erecting regular/ standard model ceiling fan of 1400mm. Sweep complete erected in position as per specification no. FG-FN/CF

Ceiling fan Supplying and erecting Energy Saving BLDC Ceiling fan 230 V A.C. 50 cycles 1200 mm, max. energy consumption of 28W having service ratio (CMM/W) of Min. 8 , PF>0.9, THD<10% with IR remote control/ compatible speed regulator, Temperature Rise of Max. 40 deg. C, having external mounted control PCB completely erected in position as per specification no. FG-FN/CF

वाल फॅन Supplying cabin fan of A.C. 230 V. 50 cycles 400 mm. sweep complete with necessary brackets for fixing cabin fans, wire etc.

LED ट्युबलाईट 20 वॅट Supplying & erecting inverter LED batten 20W tube light fitting with polycarbonate housing, heat sink, integrated HF electronic driver, Min. 2600 mAh Lithium ion Battery with charging time of 8-10 Hours and backup time of Min. 3 hrs. with minimum 25% of initial Watts having luminous efficacy of 100 lumen/watt, CRI>80, CCT of 6500K and THD<=20% having useful life of minimum 25000 hrs. with overheating protection with 2 years warranty.

सिंलीग फॅन क्यॉपेसिटर Supplying condenser 2.5 micro farad for ceiling fan

सिंलीग फॅन रेगुलेटर Supplying electronic type step regulator for ceiling fan 600/ 900/ 1200/ 1400 mm. sweep, complete erected on provided switch board.

32 amp किटकॅट ग्रिप Supplying HC pattern porcelain fuse bridges with base & HC type fuse links 240V 32A erected on polished wooden block complete.

63 amp किटकॅट ग्रिप Supplying fuse bridges with base HC type fuse links 240V 63A erected on polished wooden block complete

100 amp किटकॅट ग्रिप Supplying fuse bridges with base HC type fuse links 415V 100A erected on polished wooden block complete.

ड्रिलमशीन 300 वॅट

ड्रिलमशीन 500 वॅट

ड्रिलबीट 6 नंबर

ड्रिलबीट 8 नंबर

अॅगल कटर मशीन

अॅगल कटर मशीन ब्लेड

रबरी हॅडग्लोज(Pair)

कुल्लर फॅन 4 ते 5फुट करीता

कुल्लर फॅन 7 ते 10 फुट करीता

समर्शिबल पंप 4 ते 5फुट करीता

समर्शिबल पंप 7 ते 10 फुट करीता

कुल्लर खस (सुखा)

कुल्लर वॉटर टॅक 4 ते 5 फुट करीता

कुल्लर कॉपेशिटर

कुल्लर वॉटर टॅक 7 ते 10 फुट करीता

टेब बंडल box

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

पावर प्लग कम्पलीट सेट

फयुज तार 16 नंबर

फयुज तार 18 नंबर

पेचकस सेट (लहान मोठा)

L N KEY सेट

लाकडी झुला

Extension बोर्ड 4or 6 way (3-5मिटर वायर)

Supplying and erecting Gate/garden light fitting with 300mm dia. glass bowl suitable for upto 12W LED lamp on provided pipe as per specification No. FG-ODF/GLT

Supplying and erecting LED Strip light 5m Length Max. 95 W IP20 class having minimum lumens output of 1600 Lumens/m, min. efficacy of 90 lumen/W, CRI>80, CCT upto 5000K, Beam Angle of 110 deg., THD<10%, p.f. >0.95, operating range of 230-270V, Life class of 30,000 Hrs. at L70B50 including driver with 1 year warranty.

Supplying and erecting LED Strip light 5m Length Max. 45 W IP20 class having minimum lumens output of 800 Lumens/m, min. efficacy of 90 lumen/W, CRI>80, CCT upto 5000K, Beam Angle of 110 deg., THD<10%, p.f. >0.95, operating range of 230-270V, Life class of 30,000 Hrs. at L70B50, including driver with 1 year warranty.

Supplying and erecting integrated LED Bollard Cylindrical/Cubical shaped 500mm 8W IP65 & IK10 class having extrusion aluminium housing with polycarbonate diffuser, having system lumens output of Min. 800 Lumens, min. efficacy of 100 lumen/W, CRI>80, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-240V, inbuilt surge protection of 2 kV, Life class of 25,000 Hrs. at L50B50, including driver complete with 2 Year warranty as per specification No FG-ODF/FLS2.

Supplying and erecting integrated LED Post Top 45W IP65 & IK10 class having die cast aluminium housing with UV protected polycarbonate diffuser, having system lumens output of Min.4500 Lumens, min. efficacy of 100 lumen/W, CRI>80, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-240V, inbuilt surge protection of 2 kV, Life class of 30,000 Hrs. at L50B50, including driver complete with 2 Year warranty as per specification No FG ODF/FLS2.

Supplying and erecting integrated LED round burial light 6W IP65 & IK10 class having pressure die-cast housing, having system lumens output of Min. 500 Lumens, min. efficacy of 85 lumen/W, CRI>80, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 100-240V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L50B50, including driver, salt spray tested for 500 Hrs. including making of recess of appropriate size for flushing into surface with 2 Year warranty as per specification No FG-ODF/FLS2.

Supplying and erecting bulk head LED fitting max. 10W with high transitivity diffuser with system lumens output of min. 1100 lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., THD<10%, p.f. >0.95, operating range of 140-260V, in built surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, IP66, IK09 rated on provided PVC Block / wooden board with 3 years warranty.

Supplying and erecting LED square / circular Max. 25 W down lighter/ Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2750 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.

Supplying and erecting LED square / circular Max. 18 W down lighter/ Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2000 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.

Providing and erecting air circulator 600 mm. sweep oscillating type, wall mounting 1440 RPM without speed regulator, overheat protection unit, totally enclosed, flame proof motor suitable for 230/250 volts single phase, 50 cycles A.C. supply, core lead wire and with moisture proof treatment to winding and with ‘E’ class insulation.

Supplying and erecting Electronic type cordless call bell erected on T.W. board having portable bell push working on 9V D.C. battery and (effective range upto 45 meter) bell on 250 V A.C. supply

32 amp DP Switch Supplying double pole switch surface type/ flush type 240V, 32A with indicator lamp & fuse as per specification no. SW-SWR/BDP.

Digital Multimeter TRMS 6000 Counts Ohmmeter Auto-Ranging Fast Accurately Measures Voltage Current Amp Resistance Diodes Continuity Duty-Cycle Capacitance Temperature (without battery)

PVC बॉक्स 4x4

MS अर्थीग प्लेट

सर्वीस ॲगल (एल टाईप )नट बोल्ट सहीत

करवत सेट

करवत पान

एम. सिल पाकिट

Supplying and erecting fresh air cum exhaust fan of light duty 250 V A.C. 50 cycles 300mm. 1400 RPM rust proof body & blades, wire mesh, duly erected, complete.

Supplying triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted SP / TP MCBs of 36 poles/12 ways on iron/ GI frame (vertical busbar type) as per specification no. SW SWR/MCBDB

MCB बॉक्स 8 वे Supplying & erecting triple pole and neutral distribution board (TPNDB), SPMCB of 8 ways / phase (24 poles), with door, 1.2mm thickness surface/ flush mounted, IP 43 Protection on iron/GI frame (horizontal busbar type) as per specification no. SW-WR/MCBDB

MCB बॉक्स 12 वे Supplying & erecting triple pole and neutral distribution board (TPNDB), SPMCB of 12 ways /phase (36 poles), with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on iron/GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB

Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 2 ways (2 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification no. SW-SWR/MCBDB

Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 6 ways (6 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification no. SW-SWR/MCBDB

Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 10 ways (10 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification no. SW-SWR/MCBDB

Hand Dryer machine

Supplying and erecting electronic type Driver for Outdoor LED Fittings upto 25W suitable to operate on 230V A.C. 50 Hz. Having pf>0.95 and THD<10%.

Supplying and erecting electronic type Driver for Outdoor LED Fittings 26W 45W suitable to operate on 230V A.C. 50 Hz. Having pf>0.95 and THD<10%.

Supplying and erecting electronic type Driver for Outdoor LED Fittings 46W 75W suitable to operate on 230V A.C. 50 Hz. Having pf>0.95 and THD<10%.

Supplying and erecting electronic type Driver for Outdoor LED Fittings 76W 100W suitable to operate on 230V A.C. 50 Hz. Having p

Supplying and erecting electronic type Driver for Outdoor LED Fittings 101W 150W suitable to operate on 230V A.C. 50 Hz. Having pf>0.95 and T

Supplying 230/250V, 50Hz, evaporative air cooler (desert cooler) duct type having normal cooling capacity of 100cu.m per minute, with 15" exhaust, min 75 to 80 litres water capacity tank with galvanised steel sheet with grade 350 minimum, leak or drip free, front grill shall be made of non-corrosive material, circular opening shall be more than fan sweep but not exceeding more than 25mm, filter pads shall be made of wood wool or any other substitute placed in non-corrosive wire mesh and tightened at places with side panels, noise level should not be more than 65dBA at 1m distance, 3 core copper cable minimum 2m length & metal casing of the electrical components, metal frame or chassis of cooler cabinet and all exposed metallic parts, shall be provided with proper earthling complete as per specification no. AP-WCR/DAC

Supplying 230/250V, 50Hz, evaporative air cooler (desert cooler) duct type having normal cooling capacity of 120cu.m per minute, with 17" exhaust, min 75 to 80 litres water capacity tank with galvanised steel sheet with grade 350 minimum, leak or drip free, front grill shall be made of non-corrosive material, circular opening shall be more than fan sweep but not exceeding more than 25mm, filter pads shall be made of wood wool or any other substitute placed in non-corrosive wire mesh and tightened at places with side panels, noise level should not be more than 65dBA at 1m distance, 3 core copper cable minimum 2m length & metal casing of the electrical components, metal frame or chassis of cooler cabinet and all exposed metallic parts, shall be provided with proper earthling complete as per specification no. AP-WCR/DAC

Supplying and erecting ultra violet storage type water purifier ( RO+UV+UF) with softener for safe drinking water consisting of UV germicidal tube of 8W capacity choke made of copper wire and two indicator lamps, storage capacity of purified water 7 to 8 litre with activated carbon filter and softener operating on 230 V single phase A.C 3-5-1

Supplying and erecting 12V/180Ah tubular battery with battery terminal wire, duly charged with 36 months warranty complete

Providing annual comprehensive maintenance contract for 1.5TR split/window air conditioning unit complete as per terms and conditions. Job includes 1) quarterly servicing 2) on call repair 3) replacement of all spares within 24 hours 4) sending standby manpower for VIP movement. The job exclude sheet metal work and plastic material

Providing replacement of existing unservicable rotary/scroll compressor of air conditioner 1.5 TR by new one of same capacity with guarantee for one year with provided refrigerant complete.

Providing brazing pipes and checking leakages in the split/ window unit duly with dry nitrogen pressure in an approved manner.

Providing vaccumising the airconditioner system to 200 micron and charging with R32 refrigerant for 1.5TR window/split AC unit.

Supplying and erecting candle filter with filter pot for water cooler.

Supplying and erecting connector Pipe for candle filter of water cooler

Providing replacement of base tray of water cooler of any capacity.

electronic type 600 W dimmer

driver for indoor LED upto 9W

driver for indoor LED upto 10W-18W

driver for indoor LED upto 19W-24W

anchor type fastener fan hook,

fan hook of 10 mm. M.S. round bar grouted in RCC slab

Supplying and erecting ISI mark modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete. Note: Add Rs 57/- for additional two module box with double mounting plate if required. (only material)

Providing temporary illumination consisting of white/colour series lights with 8mm LED miniature lamps of 2 to 3.4V [1000nos] with cap with required switchgears erected and dismantled with rotor effect as approved with scaffolding up to three days.

Providing and fixing temporary electronic rotating machine to give running effect to strips lights and miniature lights up to a load of 5000 W 230v, 50Hz, complete with mains and required switchgears with continuous earth wire and dismantling up to three days.

Providing, maintaining and operating temporary public address system on hire consisting 02 Nos. solid state heavy wattage amplifier 250 watts ( one for working and another for stand by emergency ) working on AC / generator and 24 volt car battery supply, 06 Nos. of matching of 100 volt line (200 watts) box type speakers/sound column, 02 Nos super sensitive microphone with suitable size of microphone holding stand. The system shall be in a fully automatic change over operation in case of failure of supply for one day.

Providing, maintaining and operating temporary PA audio mixing consoles - stereo with built-in MP3 player, 48V phantom supply on all channels professional mixer with 24 digital effects, 2 Group outputs. Mixer shall have 12 MIC and 10 line balanced mono inputs with enhanced headroom & each input channel has a gain control, 4 band active EQ controls, AUX1, AUX2, AUX3/EFX, AUX4/FX and PAN control with channel mute switch, with easy and accurate monitoring of left & right output levels through individual 12 segment LED array, 11 preset EQ settings & headphone output with level control for output monitoring. The system shall be in a fully automatic change over operation in case of failure of supply for one day

Providing temporary illumination consisting of LED flood light fitting 100w, having colour temp up to 6500k, IP65, housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete erected with mains, switchgears with continuous earth wire erected and dismantled with using scaffolding up to three days

Providing temporary illumination consisting of water proof LED Par Light, 54 pieces x 3W, 230v, 50Hz, with RGBW controller complete erected with mains, switchgears with continuous earth wire erected and dismantled with using scaffolding up to three days

Providing, commissioning and maintaining temporary CCTV system with 8 channel NVR, IP video/audio input - 1 no, IP based 2.0 MP, Full HD, IR IP dome camera - 2 nos, IP based 2.0 MP, Full HD, IR IP PTZ camera - 2 nos, 2TB Hard Disk - 2 no, 32'' Full H D professional Display - 1 no, 8 port PoE Switch - 1 no, Power supply unit to camera - 1 no, On Line UPS UPS - 1 no with necessary mains, switchgears on hire basis for one day 14-1-56

Providing temporary digital projector having Full HD 1080p resolution with White and Colour Brightness at range of 3000-4000lm,HDMI port, USB port, AV port, computer port with spring loaded white screen connected with necessary mains, required switchgears and maintaining the same during the function including dismantling.

Providing temporary illumination consisting of LED rope light having 4 to 6 W capacity per meter [multi colour] and consisting suitable power adaptor with mains, switchgears erected and dismantled with using scaffolding and maintaining the same up to 3 days

Providing temporary illumination consisting of flood light fitting 200 W complete LED fitting having colour temp up to 6500k, IP65, housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete required switchgear erected and dismantled with using scaffolding up to three days.

Hiring charges for supplying and maintaining temporary 415V, 50 cycles AC generating set 11 to 25 kVA (excluding 25 kVA) capacity with necessary fuel, mains, switchgears and accessories complete with continuous running on load/no load as per requirements complete with self certification. 14-2-3

1) Above rates are applicable for first day. For subsequent five days, the above rate shall be reduced by 10% 2) The above rates are inclusive of transportation. 3) The above note does not include preparatory and testing period, and no additional amount shall be paid for that. 4) The above rates are with on load working of DG set upto 5 hours per day. For additional working hours exceeding average 5 hours per day cost of diesel shall be considered as per actual. 5) Lumpsum provision for the additional fuel (if DG set is to be used for more than five hours) shall be made as a seperate item in the estimate of temporary D G Set. (Fuel payment shall be made on the basis of actual consumption and invoice produced by Contractor.

Providing earthing with copper earth plate size 30 x 30 x 0.315 cm complete with all materials, testing & recording the results as per specification no. EA-EP

Providing pipe type earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rod complete with all materials testing and recording the results as per specification no. EA-EP

Providing earthing with copper earth plate size 60 x 60 x 0.315 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover with minimum 25 kg Carbon based environment friendly back fill Ground Enhancing compound complete with all materials, testing & recording the results as per specification no ESE -LA ONLY Materials

Ladder on rent for street maintenance of atleast 9 meter pole

ENGINEER /ELECTRICIAN SAFETY JACKETS

DURACELL ULTRA ALKALINE 9V BATTERIES

DURACELL ULTRA ALKALINE AAA BATTERIES

LED Torch Portable Rechargeable Led Lamp Cum Torch with Upto 4hrs Backup

Supplying and erecting quartz electronic time switch having 24 hour dial to work on 250 V 50 cycle AC having built in rechargeable nickel cadmium batteries to run the time switch on failure of supply having switch contact rating up to 16A to use independently or in conjunction with contactor.

Supplying and erecting two pole power contactor 230 V, 12 A for time switch complete erected on provided wooden block/ box, with necessary materials.

Supplying and erecting two pole power contactor 230 V, 32 A for time switch complete erected on provided wooden block/ box, with necessary materials.

Supplying and erecting four pole power contactor 430 V, 16 A for time switch complete erected on provided wooden block/ box, with necessary materials.

Supplying and erecting four pole power contactor 430 V, 40 A for time switch complete erected on provided wooden block/ box, with necessary materials.

Supplying and erecting programmable digital almanac timer microcontroller based with real time clock to operate on derived switching “ON” and switching “OFF” street light as per daily sunset and sunrise respectively automatically having 4 digit LED continuous time display, relay output 230 V / 10A with 10 hrs. battery backup and manual over drive facility capable to drive different capacity contactors timer erected in provided M.S. box.

Supplying and erecting G.I. stay set for poles, including loop insulators at inaccessible height with anchor plate 300x300x6mm., straining screws, G.l. stay wire 7/10 SWG, G.l. stay rod 20mmx1.8m length and pole clamps duly erected in provided cement concrete foundation complete.

Supplying and erecting pipe post made from G.I. pipe 40mm dia 3m overall length, with two bends, fixed to pipe at the top & bottom, round bended erected with MS flat welded MS bolts 15cm long duly grouted in wall with necessary clamps, nuts and bolts etc. duly painted with two coats of aluminium paint complete.

Supplying and erecting guarding loop using G.l. wire no. 8SWG for LT OH line of horizontal formation erected with 20SWG G.l. wire as binding wire and 50mm section on each side complete.

Supplying and erecting fibre/PVC spacers for LT overhead line 3 to 5 conductors complete erected.

Supplying and erecting pole clamp made from 50x6mm MS flat for pole or pipe, post erected with 15mm bolts and nuts duly painted with one coat of red oxide and two coats of aluminium paint complete

Supplying and erecting pole clamp made from 50x10mm MS flat for pole or pipe, post erected with 15mm bolts and nuts duly painted with one coat of red oxide and two coats of aluminium paint complete.

Supplying and erecting ‘D’ type pole clamps, fabricated from 50x6mm MS flat with 15mm bolts and nuts fixed to steel tubular pole duly painted with one coat of red oxide and two coats of aluminium paint complete.

Supplying and erecting C type (half) clamps for pole made from 50x6mm flat for fixing cross arms by means of 15mm bolts and nuts painted with one coat of red oxide and two coats of aluminium paint complete.

Dismantling the existing pole up to 6 m height with brackets, clamps, insulators, stay from the c.c. foundation and making the site clear by refilling the pits with excavated materials and bringing it to the ground level.

Dismantling the existing pole above 6 m height with brackets, clamps, insulators, stay from the c.c. foundation and making the site clear by refilling the pits with excavated materials and bringing it to the ground level.

Dismantling the existing overhead line including G.I. wires of all sizes without damaging & making the coils in suitable sizes.

Providing pipe type earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rod complete with all materials testing and recording the results as per specification no. EA-EP

Supplying and erecting GI wire of high purity of required sizes used for earthing or any other purposes on wall with necessary G. I. Clamps fixed on wall/cable/ conduit with screws complete.

Making cement concrete foundation including excavation (60 x 60 x 150) cm deep in 1:3:6 cement concrete 20 x 25 mm stone metal, (45 x 45 x 45) cm /45 cm dia. x 45 cm height plinth duly plastered, with necessary curing and finishing complete. (above 6 m to 9 m poles)

Making cement concrete foundation including excavation (60 x 60) cm x deep 1/6 of pole length in 1:3:6 cement concrete 20 x 25 mm stone metal, 45 cm x 45 cm x 45 cm /45 cm dia. x 45 cm. height plinth duly plastered, with necessary curing and finishing complete. (for above 9 m poles)

Making cement concrete foundation including excavation (60 x 60 x 150) cm deep in 1:3:6 cement concrete, (20 to 25) mm stone metal with necessary curing and finishing complete.(for stay).

Painting of pipe pole up to 6 m length along with street light / pole brackets / clamps etc by scrapping the existing paint complete as per specification no CW -PTG/PTP.

Painting of steel tubular / rail / RSJ pole above 6.0 m length along with street light pole brackets, clamps etc by scrapping the existing paint complete as per specification no CW -PTG/PTP.

Painting of feeder pillar / switchgears and frame of panel board with single coat of red oxide & two coats of approved quality enamel paint by scrapping existing paint painting the same complete. (while calculating square meter area, area of angle iron frame on which the switchgears are erected shall be considered if required

Painting identification number by indelible ink marker / enamel paint on fittings / equipment with the help of ladders if necessary by dismantling and refitting the enclosures, tubes etc if required the same and refitting complete.

Supplying, erecting, testing and commissioning 120 W amplifier suitable to operate on 230 Volts A.C. / 12 Volts D.C. supply complete as per specification no. FF-PA/AFR

Supplying, erecting, testing and commissioning 15 to 30 Watts sound column or ceiling mounted complete as per specification no. FF-PA/SOC

Supplying, erecting, testing and commissioning stand mounted/handheld type wired microphone having 2 mV/Pa sensitivity, impedance level limit 300 ohms and 50 - 16000 Hz suitable to operate in -10 deg C to +55 deg C with min. 7 metre shielded cable and 3 Pin Professional XLR Connector, stereo jack complete as per specification no. FF-PA/MIC

Supplying, erecting, testing and commissioning rust free microphone floor stand of chrome plating/powder coating or S.S. material , 500 mm to 1500 mm height and sturdy mechanism ensuring trouble free movement complete.

Supplying, erecting, testing and commissioning of 2 core shielded cable complete as per specification no. FF-PA/MCC

Supplying, erecting, testing and commissioning of 1.5 sq. mm speaker wire complete.

Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts routed in wall complete.

Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts routed in wall complete.

D.E. Open Jaw fix spanner 12 piece set - 6 -32 mm

Bi-hexagon Ring spanner 12 piece set - 6-32mm

Ball pen hammer with handle 800 gm

Combination side cutting plier 200 mm KDPE coated

Adjustable wrench crome vanadium 250 mm - 30 mm

Pipe wrench stillson pattern carbon steel 450 mm - 60 mm

Pipe wrench stillson pattern carbon steel 600 mm - 76 mm

Screw driver Engineering pattern 6 X 300 mm

Screw driver Engineering pattern 8 X 200 mm

Screw driver Engineering pattern 5 X 200 mm

Screw driver Engineering pattern 5 X 300 mm

Screw driver with green neon bulb line tester 3.6 X 60 mm

Hack saw frame 300 mm size with heavy duty blade

Tool box fabricated from MS sheet of 18 SWG of size 50 X 30 X 30 cm with locking arrangement

Cold chisels chrome vanadium hexagonal 19/14 - 200 mm

Chain pipe wrench IS 54123 -- 210 - 4"

Chain pipe wrench IS 54123 -- 210 - 6"

25 mm dia heavy duty 1.2 m long crow bar

12 mm size 2 NT capacity wire rope 3 m long with dog bolt 2 Nos.

50 mm size G.I. "B" class pipe 1.5 m long with coupling on both side, for use as lever

Central punch Chrome Vanadium steel 175 mm

Triangular file 300 mm size of "Standard" make

Half round file of 300 mm size " Standard" make

Bearing puller three legs -- 8"

Bearing puller three legs -- 10"

Bearing puller three legs -- 12"

Hydraulic flip flop crimping tool suitable for 6 to 500 sq mm size cable lugs (Usha-Ismail or similar make)

Hand operated crimping tool with set of dies ranging from 6 to 185 sq mm cable lug, in pairs of hand ratches

Insulator tester (Megger) cranking type having metal body of range 100 Volts 1000 Ohms.

Earth Tester - 4 terminals of range 0-10-100-1000-10000 Ohms

Tong Tester ( Clip on meter ) of range 0-10-30-100-1000 Amps and 0-300-600 Volts

Engineer's precision steel level of size 300 mm

Precision stainless steel rules 500 mm

Allen Head Wrench Crome Vanadium 10 piece - 6-10mm

Tubler box spanner set with Tommy bar 8 piece- 6-22mm

Diagonal cutting pliers 150 mm PVC coated

Long nose pliers carbon steel 200 mm PVC coated

Water pump pliers chrome vanadium 259 mm - 40 mm

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 10 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying and erecting rolled steel joist (girder) pole 125 x 70 mm (13.3 kg/m) with base plate in provided foundation as per specification no. OH-PL/RSJ

Supplying and erecting M.S. pipe pole ‘B’ class 80 mm dia 6 m long with pole cap, base plate in provided foundation as per specification no. OH-PL/GIP

Providing pipe type earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rod complete with all materials testing and recording the results as per specification no. EA-EP

Supplying and erecting all aluminium stranded conductors 7/2.21 mm. complete. (Gnat) (73.77kg/km) as per specification No. OH-CON/AAC

Supplying and erecting all aluminium stranded conductors 7/3.10 mm. complete. (Ant.) (145.0 kg/km) as per specification No. OH-CON/AAC

Supplying and erecting 3 phase 5 core 16 sq.mm. (3x16+1x25+1x16) Aerial bunched aluminium cable along with necessary accessories for LT distribution on provided LT pole as per specification no. OH-CBL/ABC

Supplying and erecting 6 Way AB cable distribution box on provided pole with necessary accessories as per specification no. OH-ABC/JBS

Supplying and erecting integrated LED street light fitting 23 to 25W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 2300 Lumens, min. efficacy of 100 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3Years warranty as per specification No FG-ODF/FLS2.

Supplying and erecting integrated LED street light fitting 26 to 30W IP65 & IK08 class having single piece pressure die-cast aluminium housing , having system lumens output of Min. 2600 Lumens, min. efficacy of 100 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FG-ODF/FLS2.

Supplying and erecting integrated LED street light fitting 40 to 50W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 4400 Lumens, min. efficacy of 110 lumen/W, CRI>70, CCT upto 6500K,THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FG-ODF/FLS2.

Supplying and erecting integrated LED street light fitting 70-75W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 7700 Lumens, min. efficacy of 110 lumen/W, CRI>70, CCT upto 6500K,THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FG-ODF/FLS2.

Supplying and erecting integrated LED street light fitting 100-110W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 11000 Lumens, min. efficacy of 110 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FG-ODF/FLS2.

Supplying and erecting integrated LED flood light fitting Max. 70W IP65 & IK07 class having pressure die-cast aluminium housing, having system lumens output of Min. 8400 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver with U shaped bracket with 3 Years warranty as per specification No FG-ODF/FLS2.

Supplying and erecting integrated LED flood light fitting Max. 120W IP65 & IK07 class having pressure die-cast aluminium housing, having system lumens output of Min.14500 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver with U shaped bracket with 3 Years warranty as per specification No FG-ODF/FLS2.

Supplying and erecting integrated LED flood light fitting Max. 155W IP65 & IK07 class having pressure die-cast aluminium housing, having system lumens output of Min. 18600 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver with U shaped bracket with 3 Years warranty as per specification No FG-ODF/FLS2.

Excavating hard Rock or bituminous road by chiselling for preparing pit for pole / stay/earth plate / for laying cable/ pipe & clearing the site by removing debris & making the site as required complete.

Making cement concrete foundation in 1:3:6 cement concrete, (20 to 25) mm. stone metal duly plastered with necessary curing for complete. (pole muffing or any other purpose).

Please Enable Macros to View BoQ information