Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.7 LAccepted-AOC | L1 | Accepted-AOC Accepted | |
| 2 | L2₹30.1 L+₹1.4 L (4.85%)Rejected-Finance | L2 | Rejected-Finance Rejected due to bidder not L1 |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
27 Jul 2022, 12:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Sh K A Vardhan, IDSE
Office of the GE (Army) Camp Hanuman, Ahmedabad - 380 004
REPAIRS TO BR WORKS IN CENTRAL INSTITUTE AND OTM ACCN AT AGE BR1 AHMEDABAD
2022_MES_534410_1
8259/E8
Open Tender
Civil Works
Works
180 days
GE (Army) Ahmedabad
As per NIT
8 documents required · 8 mandatory
₹500
GE (Army) Ahmedabad
₹60,000
Yes
27 Sept 2022
29 Jun 2022
28 Jul 2022
29 Jun 2022
27 Jul 2022
13 Jul 2022
6 Jul 2022 - 6 Jul 2022
Amount
Demolition of Brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete.
Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons laid, bedded and pointed in any mortar.
Demolition of cement concrete (unreinforced) in ground floors and roof and paving not exceeding 15 cm thickness (below or above ground level) complete.
Demolition of cement concrete reinforced (reinforcement cut as required to facilitate demolition)Roofs, floors (other than ground floors), beams, staircases, RCC tank, landing, chajjas and similar suspended work complete.
Dismantling timber scantling 40Sqcm and over in section in any position in framed work as in rafters,
Dismantling of wrought iron work or mild steel work of any description not otherwise provided for.
Dismantling structural steel work including doors, gates but excluding framed truss etc complete.
Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings
Dismantling asbestos cement (corrugated or semi corrugated, etc) sheets in roof covering complete all as specified.
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.,) or insulation boards/slabs/blankets, any thickness, including cover fillets complete.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete.
Taking down chowkhats or frames area not exc. 1.50 Sqm each with shutters (without taking off shutters from the frames) complete.
Taking down chowkhats or frames area exc. 1.50 Sqm and n. exc 4.00 Sqm each with shutters (without taking off shutters from the frames) complete.
Taking down shutters of any description exc 1.0 sqm but n exc 2.0 sqm complete.
M&L for providing precast cement concrete louvres and jallies, 25mm thick (measured solid) type B0 1:2:4 using 12.5mm aggregate set in cement mortar 1:4, including all mouldings and demolition of old louvers and jallies complete.
Supply only integral water proofing compound conforming to IS: 2645 - 1975 specification complete all as specified and as directed
M&L for brick work with sub class 'B' bricks built in CM (1:6) straight or curved on plan & exc 6 m mean radius with old size bricks complete.
M&L brickwork with sub- class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete.
S&F 30mm thick flush shutter , Solid core , construction with solid board core and plywood face panels commercial type on both sides.
M&L for Second class hardwood Glazed and skeleton shutters, 35mm thick, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, cham-fered or rounded, mitred and rebated sash bars, any numbers and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. cla-use 8.20 (a); supplied and fitted to chowkats.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.
S&F Solid PVC door frame of size 50x47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube, supplied and fixed in opening as per specification and drawing complete as directed.
S&F 200mm extruded aluminium alloy tower bolts extruted sections anodised complete.
S&F in repairs Aluminiumn anodised barrel tower bolts 200mm length of extruded section complete.
S&F 300mm long aluminium alloy anodised sliding door bolts complete complete.
S&F in repair aluminium alloy anodised sliding door bolt with hasp and stapple ( bolt type) and fixing clips of sheet cast or extruded section with fixing bolts and sliding bolt of extruded section 300mm length & dia not less than 12mm with & including 6 Nos of bolts complete.
S&F 100mm long mild steel butt hinges, medium weight cold rolled complete.
S&F 150mm extruded aluminium alloy handles fabricated type anodised complete..
S&F in repair 150mm size aluminium anodised door handles complete.
S&F in repair Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed, cast iron body complete.
S&F in repairs door closer aluminium (extruded section) body hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg complete
S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete complete
S&F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and averaege width of aperture 1.40mm and fixed with stainless steel wire staples complete.
S&F framed work such as grills, gratings, etc.. with ends of bars shouldered and / or riveted, framed for ceiling; ladders; railings; framework of water tanks and similar work conforming to Fe-290 (Gde E- 165) complete.
S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats etc conforming to Fe.410-W (Gde-E-250, Quality-A) complete.
S&F rolled mild steel sections as in framing for cladding, glazing, framing for chajja and the like fixed with angle cleats and connecting plates, etc. conforming to Fe-290 (Gde E- 165) complete.
S&F roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-410-w (Gde E- 250) quality A complete all as specified.
S&F mild steel Gde Fe 410-O or Fe 310-O Chowkhats and frames of door shutters ( any type, size etc.) of angle, Tee or any section with MS plates/ gusset plates, cleats, hold fast etc including fixing of hinges by welding,.
S&F in repair 1.25mm thick Steel rolling shutters, without ball bearing, as specified including top cover, an?choring rod,hasp and staple and one shop coat of primer erected in position as indicated, complete: push pull or manual type complete.
S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified as specified
S&F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete.
S&F Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified as specified
S&F 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc fixed with L-type or J-type or cranked hook bolts complete all as specified specified
Refixing of asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc fixed with L-type or J-type or cranked hook bolts complete.
S&F 6mm thick asbestos cement two piece serrated ridge for corrugated or semi corrugated sheets fixed with L-type or J- Type or cranked hooks bolts complete.
M&L for 4 mm thick AC plain building boards fixed to MS frame as in ceiling complete.
S&F forex panel board, prelaminated both side with decorative choice lamination fixed in wall
M&L machine cut Kota stone slab 18 to 20 mm thick as in flooring or trades of step incl half round moulding over and including screed bed 15 mm thick in CM (1:6) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and polishing complete all as specified.
M&L machine cut Kota stone slab 18 to 20 mm thick as in riser of step including 10 mm thick rendring in CM (1:4) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and polishing complete all as specified.
M&L for 75 mm thick cement concrete type C-2 (1:3:6) using 40mm graded stone aggregate as in plinth protection including finsihing even & smooth without using extra cement and making dummy joints complete.
M&L for 75mm thick cement concrete type D-2 (1:4:8) (using 40 mm graded stone aggregate) as in subbase for floors complete.
M&L 25mm thick PCC (1:2:4) type B-0 (using 12.50mm graded stone aggregate) as in leveling course complete.
Roughening surface of old concrete / terrazo floor by peecking sweeping clean and washing down with water to remove dust etc. complete all as specified.
M&L for Glazed ceramic tiles coloured (300x450mm) x 7mm thick, in dado/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick backing coat of tiles in CM (1:4) complete all as specified
M&L for non skid ceramic (colored), 7 to 8 mm thick as in floor area of each tile exceeding 0.11 Sqm but n exceeding 0 .18 Sqm , set and jointed in neat cement slurry and pointed in white or colored cement to match incl and over screed bed or beeding layers of mortar 15mm thick in CM 1:6 in floors, complete. complete. 300x300
M&L for Non skid ceramic (colored), 7 to 8 mm thick as in floor area of each tile exceeding 0.18 Sqm but n exceeding 0 .38 Sqm , set and jointed in neat cement slurry and pointed in white or colored cement to match incl and over screed bed or beeding layers of mortar 15mm thick in CM 1:6 in floors, complete.
M&L for Non skid ceramic (colored), 7 to 8 mm thick as in floor area of each tile exceeding 0.18 Sqm but n exceeding 0 .38 Sqm , set and jointed in neat cement slurry and pointed in white or colored cement to match in vertical surfaces such as skirting over and including 10 mm thick backing coat in cement mortar 1:4 complete.
M&L Vitrified light shade Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and over and including screed bed or beeding layers of mortar 15mm thick in CM 1:6 in floors, complete. complete.
Vitrified light shade Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm set and jointed in neat cement slurry and pointed in white or coloured cement to matching vertical surfaces such as skirting over and including 10 mm thick backing coat in cement mortar 1:4
M&L for Chequered cement concrete tiles 300 x 300 x 25mm thick as in floor, paving etc set, jointed in neat cement slurry and pointed in cement slurry with grey cement and pigments over and including 15 mm thick screed bed or bedding layer of mortar with CM 1:6 complete.
Taking down cement plaster on wall of any description including racking out joints, hacking for key and scrubbing down with water etc complete.
M&L for 15mm thick rendering on surfaces other than fair faces of brick or concrete surfaces in CM (1:6) and finished even and smooth without using extra cement complete
M& L for 15mm thick rendering on fair faces of brick/ concrete surfaces in CM (1:4) finished even and smooth without using extra cement mixed with water proofing compound.( Note- Water proofing compound should be mesured and paid separately )
M&L for 10mm thick rendering on cement concrete as in ceiling with cement mortaar 1:3 complete.
M&L for applying two coats of cement base paint on new plastered surfaces of wall over a coat of primer complete all as specified and as directed.
M&L for prepartion of newly plastered or un plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistance primer after applying wall care putty to wall surface complete.
M&L for preparation of new plastered surfaces on walls and applying two coats of cement based paint over a coat of white cement primer complete.
M&L for complete removal of existing treatement and applying two coats of oil bound distemper with white wall care putty and a coat of primer, old plastered or un-plastered surfaces on walls complete.
M&L for preparation of new surfaces of ceiling plastered sheet and applying three coat of white wash complete
S&F for 3mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc. 0.5 Sqm in each pane.
S&F for 4mm thick figured glass, pin head type and glazing with oil putty in squares n. exc 0.5 sqm in each pane complete all as specified and as directed.
Hacking out old broken glass (any thickness, size, quality or description) form metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones.
M&L for Preparation of new or previously untreated wooden surfaces of any description, not otherwise, described, over 10cm width or girth and applying two coats of synthetic enamal paint over a coat of pink primer complete all as specified.
M&L for preparation of new or previously untreated surfaces of seamless calcium silicate ceiling and applying two coat of plastic emulsion paint over one coat of priming paints complete.
M&L for preparation of old decorative plastered or unplastered surfaces of walls including cornices etc and applying one coat of plastic emulsion paint complete.
M&L for preparation of new steel and iron surfaces of any description, over 10 cm with or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete.
S&F in repairs PVC(SWR) 110 mm dia soil waste and rainwater drainage pipes single socketed in any length with rubber ring joint laid in floor or fixed on walls complete.
S&F in repairs PVC(SWR) 75 mm dia soil waste and rainwater drainage pipes single socketed in any length with rubber ring joint laid in floor or fixed on walls complete.
S&F in repair 75 mm bore PVC (SWR) bends 75mm ( any radius), diminishing pieces or tapers ( larger bore measured) complete.
S&F 110mm dia PVC (SWR) branch piece single (single 'Y') equal or unequal with acess door complete.
S&F 4mm thick coloured textured designer ceiling board (Everest) of size 595X595 mm fixing with screws/clips including Tee grid suspension system of size 600 mm x600 mm type-1 made out of roll framed hot dipped galvanised steel zinc coated of not less than 120 gm/sqm ,main runner shall be 0.3 mm thick of section 24 mmX33 mm cross runner 0.3 mm thickof section 24 mmx25 mm,wall angle shall be 0.63 mm thick of section 24 mmx24 mm grid shall be suspended by 4 mm dia adjustable quick fit hanger rod, system exposed portion shall be pre painted polyster coated in off white/white in colour complete with material,fixing, jointing etc complete.
M&L for 12mm thick Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish (Frame work for ceiling shall be measured and paid separately)
All as item No. 82 above but 100mm sunk or raised moulding and curved edges, etc in ornamental intricate design icluding GI frame work complete.
M&L Gl frame work for seamless ceiling with size of grid 605 x 605mm comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit/ceiling at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (of any length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete.
Taking down of existing un-serviceable water proofing treatment , taking down cement plaster etc, of any description and claening of top surfaces of cement concrete flushing out junction of parapet walls and washing down with water complete.
M&L for water proofing treatment to non accessible RCC roofs by providing 10mm thick screed in CM 1:3 mixed with & including water proofing compound @ 3% by weight of cement & applying one coat of bituminous primer @ 0.30 kg/sqM&Laying APP based polymer modified membrane with polyster non woven reinforced of weight not less than 3 kg/sqm 3mm thick with polythene finished sealing with side over laps of 75mm & 100mm laps at the ends of membrane by torch application method & applying two coats of aluminium paint as per the manufacturer,s instructions complete.
S&F in repair 10mm thick multi wall Polycarbonate sheet of colour as approved, fixed in roofs, wall clading etc with screw, bolts as per manufacturers instruction complete.
S&F powder coated anodised aluminium door comprising frame of size not less than 100 x 44 x 1.98 mm thick with one or more rebates and shutters pull and push type or side hung type (with or without aluminium sash bars) comprising top & lock rails of section 83 x 44 x 1.98 mm thick, botom rail of section 114x44.5 x 1.95mm thick and stiles of section 83.5 X 44.45 mm X 1.98mm thick including necessary jointing cleat, glazing clip, rubber packing anodized aluminium beading, screws, anodized aluminium fittings such as hinges 100mm size (04 nos) handles 'D' type 125mm, floor door stoppers, mortice lock, with 5 mm thick tinted glass / preleminated particle board (Novapan) panel and making good of wall surface to match existing surface complete all as specified
S&F powder coated anodised Aluminium door frame of size 100 x 44 x 1.98mm thick with one or more rebates and shutters pull and push type or side hung type (with or without aluminium sash bars) comprising of top & lock rails of section 115 x 44 x 1.98 mm thick, botom rail of section 150 x 44 x 1.98mm thick and stiles of section 85 X 44mm X 1.98mm thick including necessary jointing cleat, glazing clip, rubber packing anodized aluminium beading, screws, anodized aluminium fittings such as floor spring or hinges 100mm size with hydrolic door closer, handles 'D' type 125mm, floor door stoppers, tower bolt 200 mm, sliding door bolt 300 mm or mortice lock,hydraulic door closer with 5mm thick tinted glass / preleminated particle board (Novapan) panel and making good of wall surface to match existing surface complete all as specified
S&F powder coated anodised Aluminium alooy sections sliding windows with frames of Jindal or equivalent and 3 track sliding shutters duly fitted with neoprene beading, glazing clips, two shutters tinted glass panes 4.8 mm nominal thickness one shutter with stainless steel wire cloth .36mm dia and average width of aperture 1.4mm , aluminium alloy handles/lock etc. complete. Note: Thickness of chowkhats/Frame section and sliding shutter section shall be minimum 1.5mm thick complete all as specified. (Note :Rates include all glazing/aluminium wire cloth, rubber packing, jointing cleats, glazing clips, aluminium snap beading, locking arrangements, handle, plastering and finishing the surface to match the exisiting surface after fixing of window.)
S&F aluminium anodised ventilator with fixed aluminium frame of size 65 x 40 x 1.98mm thick fixed in vertical position with aluminium vertical members and half portion to be provided with 4mm thick pin head glass and remaining portion to be louvered using 4mm thick pin head glass and louvered portion covered with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm incl necessary channel frame work, including rubber gasket and aluminium beading complete all as specified.
S&F 12mm thick toughnned glass door including SS handle, hinges and all necessary fitting & fixtues etc. as per manufacturer's Instruction complete.
S&F in repair aluminium powder coated fixed partition of aluminium frame as per following specifications : (a) Aluminium partition frame & middle rail not less than - 63.80 x 38.10 x 1.28 mm section. (b) 9 mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination fixed up to height not less than 0.90 m in bottom panel. (b) 5 mm thick glass pane- Fixed in top panel with jointing clips, glazing clips, rubber packing, screws etc complete. NOTE: - The rate included complete aluminium section with S&F of particle board and glass as specified above.
S&F Stainless Steel butt hinges 100mm size medium weight cold rolled mild steel complete
M&L in repairs aluminium deco grill medium grade of mesh size 75mmx75mm with 6mm square anodised aluminium bars fixed with aluminium frame of size 37x19x2mm complete
M&L in repairs Machine pressed 60mm thick glossy finish precast concrete inter locking tiles any shape and size conforming to IS 15658-2006 M-35 Grade with grey cement and pigment, laid over 20mm thick sand cushioning including watering and consolidation complete.
S&F in repair solid PVC wall lining/paneling consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame with 5 mm PVC fillet of width 35 mm for wall panelling for fixing to wall to make PVC frame complete.
Taking down and refixing Steel rolling shutters, with or without ball bearing, as specified including oiling/ greasing, reparing of parts and to make proper functional condition complete.
TECH SERVE SOLUTIONS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .