AMC of Firefighting

Supplying, fixing, testing and commissioning of butterfly valve PN 1.6, with Bronze/ Gun metal seat duly ISI marked compete with Nuts, Bolts, Washers, gaskets, conforming to IS 13905 of following sizes as required.

- do - 150 mm dia

- do - 100 mm dia

- do - 80 mm dia

Supplying and fixing 63 mm dia, 15 mtr long CP hose pipe with 63 mm dia Male and Female Gun metal duly binded with GI wire, rivets etc conforming to IS 636 (Type -A) as required. Makes: As per list of recommended brands.

Supplying and fixing 63 mm dia, 15 mtr long RRL hose pipe with 63 mm dia Male and Female Gun metal duly binded with GI wire, rivets etc conforming to IS 636 (Type -A) as required.

Supplying and fixing First-Aid Hose Reel with MS construction spray painted in Post Office Red, Conforming to Is 884 with upto date amendments, complete with the following as required. (a) 36.60 Mtr long 20 mm (Nominal internal) dia water hose Thermoplastic/ Textile reinforced/ Rubber braided/ Polypropylene Type-2 as per IS:12585 (b) 20 mm (Nominal internal) dia gun metal ball/ gate valve and nozzle. (c) Drum and brackets for fixing the equipments on wall. (d) Connections from riser with 25 mm dia stop valve (gun metal) & MS pipe.

Supplying and fixing of hose cabinet of size 750 mm X 600 mm X 250 mm made of No.16 gauge SWG CRCA sheet with 6 mm thick glazed glass door including necessary locking arrangement suitable to accommodate 2 Nos of 15 mtr long Hose pipe,1 No branch pipe, mounted on wall OR raised brick platform and duly painted with Post office red externally and white internally with synthetic enamel paint complete in all respect, for external hydrant as required.

Supply and fixing 63 mm dia Gun metal branch pipe with 20 mm (Nominal internal diameter) size Gun metal to IS 903, suitable for instantaneous connection to interconnect hose pipe coupling as required.

Supply and fixing of 4 Nos of 9 Ltrs capacity round bottom sand buckets along with bucket sand, fire buckets with round bottom type enamel painted, white inside & red out side and letter FIRE in black out side & Handle with mounting bracket.

Supply and fixing of Fire bucket stand fabricated by MS Angles to install for Four numbers of buckets as per local fire officers standards.

Supplying and fixing single headed Internal/ External hydrant valve with instantaneous Single Headed Gun metal of 63 mm dia with Cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gun Metal cap and chain as required.

Providing and fixing of Pressure Switch in the MS Pipeline including connection etc as required.

Providing, laying, testing & commissioning of following classes MS Pipes conforming to IS 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets including transportaiton and painting with two coats of red oxide paint and one coat of post office red enamel paint and all labour charges and cost of all accessories etc., complete.

- do - 200 mm dia 'C' Class - MS pipe

- do - 150 mm dia 'C' Class - MS pipe

- do - 100 mm dia 'C' Class - MS pipe

- do - 80 mm dia 'C' Class - MS pipe

- do - 50 mm dia 'C' Class - MS pipe

- do - 40 mm dia 'C' Class - MS pipe

- do - 25 mm dia 'C' Class - MS pipe

Supply, installation, testing and commissioning of 25 mm dia Ball valve.

Supplying, installing, testing and commissioning of CI body Foot Valve with brass strainer with necessary flanges, nuts and bolts etc., complete on to the suction line.

- do - 150 mm nominal dia

- do - 100 mm nominal dia

Supply and fixing 4 way fire brigade connection of cast iron body with 4 Nos Gun metal Male instantaneous inlet couplings complete with cap and chain as required for 150 mm dia MS pipe connection, conforming to IS 904 as required.

Supply and fixing 2 way fire brigade connection of cast iron body with 2 Nos Gun metal Male instantaneous inlet couplings complete with cap and chain as required for 100 mm dia MS pipe connection, conforming to IS 904 as required.

Supply of following ISI marked, PVC insulated and shethed FRLS/ FRLS-H round copper cable for voltage up to 1,100 V as per IS 694/1990

- do - 4 Core 1.5 Sq. mm

- do - 2 Core 1.5 Sq. mm

Supply of Diesel including cost, conveyance and all incidental charges etc., complete.

Painting two (2) coats for new iron work with Ready mixed Synthetic Enamel paint in all shades Grade-I having VOC (Volatile Organic Compound) content less than 50 grams/ liter over a priming coat with Ready mixed Red oxide metal primer paint {total three (3) coats} of approved colour and make including brushes to have an even shade including cost and conveyance of all materials as directed during execution complying with standard specifications etc., complete.

Supply, fabricating, installing structural steel supports for fixing all sizes of MS Pipes from ceiling/ wall with MS Channels, Angles, Flats, Rods, as required at site with anchor fasteners, Clamps, threaded rods, nuts, bolts, washers etc complete with painting.

Supply of Semi-skilled (2nd Class) Welder as directed by the department.

Supply of Semi-skilled (2nd Class) Electrician as directed by the department.

Supply and delivery of bolts and nuts with double washers including conveyance etc., complete (1/2" to 1")

Supply of grease of approved brand and make.

Tar felt joint filler board 12 mm thick of approved brand and make.

Supply of following Powder Coated Metal Clamp

Service and replacement of following spares to diesel generators at SV Gosamrakshana Sala and Sri Srinivasa Ayurveda Pharmacy etc. complete as directed by the department during execution of the work (excluding GST)

- do - Caliberation of fuel pump

- do - Replacement of Engine Oil

- do - Replacement of Fuel filter

-do - Replacement of Oil filter

- do - Replacement of Coolent

Servicing charges for diesel engine, work includes cost of dismantling and re-assebbling of oil filter, fuel filter, coolant, greasing, cleaning, oiling etc., complete (Excluding GST)

Optical smoke detector with LED with standard base having capacity of min 126 address combination. Operating temperature -40°C to 70°C & Humidity 0-95%. The detector should have polling 360-degree viewable LED with 5 class approved response modes all approved with the relevant standards, drift compensation and transient rejection. The detector shall have facility to mount in different comprehensive environment like Hostile environment, precious storage, Warehouse and normal working environments. The detector should have a self-locking mechanism and requires a special tool to remove this detector. The detector should have a hard address inside the base. The detector must have nonvolatile memory to write the installation date & site codes. The detector should be made of fire-retardant material & should be melt above 100-degree C. The detectors must be openable for the cleaning of dust whenever required. All the other specs should be as per the specifications.

Supply, installation, testing & commissioning of analogue addressable loop powered sounder & Beacon with inbuilt isolator and having min 15 distinct sound patterns/ multitone to indicate exit doors and direct occupants for safe and fast evacuation and 100dB output with minimum 1Hz frequency flash rate designed for IP65 requirements and approved to operate in –10°C to +55°C temperature, complies with the essential requirement of the EMC Directive to be supplied with Junction Box, Glands and other mounting accessories for proper installations.

Supply, installation, testing & commissioning of dust and vermin proof (Resettable) addressable analogue manual call boxes along with isolators inbuilt having front reset mechanism with 170° viewable LED and can be viewed from the distance of 7 M also have inbuilt isolator having operating temperature from - 40°C - 70°C to initiate audio visual alarm in case of human detection of fire. The manual call point must be indoor type with IP 44 rating. The call point must be ressatable type without break glass.

Supply, install, test and commissioning of 4 loop addressable peer to peer networkable analogue addressable type fire alarm control panel with minimum 1,500 Character/ 240X64 Pixel/ 7 inch Touchscreen graphic LCD display. The panel should be equipped with sufficient numbers of loop with 20% spare capacity, with each networkable intelligent fire alarm control panel having SLC with capacity of min 250 detectors/ devices in any combination (Min 120 Detector) with key pad, dual flash-based microprocessor technology, inbuilt USB Port for upload and down load the configuration tools, RS232 serial port for direct PC or modem connection, inbuilt NAC's, min 20 programmable Zonal LEDs and operates on 240V AC + 10% with 50 Hz with built in charger.

The panel shall have fire, fault relays, option of BMS integration MODBUS/ BACKNET, graphical software for provision of TCP/ IP modules, remote access, class 'X' wiring with provision of both class 'A' and class 'B wiring in the SLC circuit, user friendly with communication facility to monitor & control the FACPs from a single window. The panel shall be suitable for minimum of 5,000 event record facility, event fetch from FACP facility and the single panel shall be suitable for min 2,000 fire zones and 200 Panels/ Nodes in one network with all other accessories required to successfully run the system. (The System cost shall be included of all necessary cards, modules, panel enclosure, CPU and associated accessories to complete the system design).

Supply and transportation of 2C X 1.5 sq.mm XLPE/ PVC insulated & PVC sheathed armoured cables of 1.1 KV grade with copper conductor as per lS 7098 Part-l -1988 etc complete.

Rewinding of the following various capacities of minor/ medium burnt motors single phase/ three phase with suitable gauge of insulated copper wire varnishing, tapping, fitting etc., complete with over hauling and replacement of termibnal plate/ minor hare ware items viz,soldering,bolts and nuts, hylum sheet strips, painting with approved colour etc., if any and to keep motor in good condition. (The rates are Excluding GST)

- do - 7.50 HP Submersible Electric Motors of any make.

- do - 12.50 HP Monoblock Electric Motors of any make.

Replacement of of following sizes of Ball bearings for single phase/ 3 phase motors. (The rates are Excluding GST)

Ball Bearings of SKF make No:6303

Ball Bearings of SKF make No:6304

Ball Bearings of SKF make No:6305

Ball Bearings of SKF make No:6306

Ball Bearings of SKF make No:6307

Ball Bearings of SKF make No:6308

Ball Bearings of SKF make No:6309

Ball Bearings of SKF make No:6310

Ball Bearings of SKF make No:6311

Ball Bearings of SKF make No:6312

Ball Bearings of SKF make No:6313

Ball Bearings of SKF make in india ball bearing No.6313 (DE & NDE) suitable for 60 HP squirrel/cage induction motors. (The rates are Excluding GST)

Supply of L&T make 3 Phase DOL ML 1.5 SASD for 15 HP control Panel Board with sheet metal box with MCB up to 15 HP of satndard make fully automatic, including cost and conveyance of all materials incidental charges etc,. Comlplete. (The rates are Excluding GST)

Providing fixing, testing and commissioning of 15 mm size quartzoid bulb type sprinklers of rating 68º C. pendent/ side wall with required accessories.