Supply, Installation, Testing and Commissioning of Semi Modular Operation Theatre At.SDH Bardoli & SDH Mandvi Di.Surat

Name of Work :Supply, Installation, Testing and Commissioning of Semi Modular Operation Theatre At.SDH Bardoli & SDH Mandvi Di.Surat

Estimated Estimated Rates Total Amount

Estimated Estimated Rates Total Amount

may be Item Of Work Unit may be more

more or or less

less In Figure In word

Supply, Installation, Testing and Commissioning of 50 mm thick Pre Fabricated Modular Operation Theater Panels

(Walls and Ceiling) made out Polyurethane foam injected at 40 Kg/m3 sandwiched between

0.8 mm thick GP and SP sheet on front side and 0.5 mm GP and SP/PPGI sheet on back-side. The inner surface walls

be fixed to the bricks wall with essential support. There will be minimum possible cavity/gap in between solid and steel

walls and will be variable to suit the architects lay out for the flush mounting of the equipments. The wall and ceiling

panels must comply with necessary provision of to JIS Z 2801/ISO 22196, BS EN 1363-1:2020, EN 1363-2:1999, EN

52210-2:1984-08, DIN 4102-1, Class A2. Any Third-party compliance certificate mandatory. Panel should be covered

6550.00 Rupees Six Thousand Five Hundred Fifty Only Sq Mtrs.

with protective sheath of 300 d.f.t Anti-bacterial Paint having undergone Washability/Water resistance Test JIS K

5663.7.12, permeability test less than 200 unit of permeability, Anti-bacterial effect against staphyloccoccus aureus,

Escherichia coli (via HALO test) and safety and causative agents such as formaldehyde, toluene, xylene,

paradichlorobenzene etc. Third party (NABL approved Lab) certification for EGP and thickness test certificate to be

at time of supply.

The flooring within the surgical theatre should consist of a minimum of 2mm thick antistatic seamless PVC, ensuring

durability and safety. This floor should be smooth, non-slip, and made from an impervious material with sufficient

conductivity to dissipate static electricity effectively, yet not so conductive as to risk electric shock to personnel. The

PVC used should be of very high quality, particularly designed for electrostatic charge dissipation, and should not be

less than 2 mm in thickness. The installation process should utilize continuous rolls, and joints should be seamlessly

welded using special PVC thermal welding units with welding bars of the same color to ensure uniformity and prevent

contamination. The sheets should be highly durable, capable of resisting shocks, indentations, and scratches. The

conductive material should be uniformly impregnated within the PVC as grains to enhance its antistatic properties.

Additionally, the flooring should be inert to body fluids, chemicals, and disinfectants, and remain unaffected by

temperature variations typical within an operating theatre. It should efficiently discharge electric charges up to 2 kV,

and the electrical resistance (point to ground) should be maintained within 2.5x10^4 to 5x10^6 ohms, ensuring no

2 78.90 buildup of electrical charge beyond 100 volts. Floor installation should be performed by skilled workers from 4250.00 Rupees Four Thousand Two Hundred Fifty Only Sq Mtrs.

accredited agencies authorized by the PVC sheet supplier. The installation should include a conductive copper grid

beneath the PVC sheet, supported by liquid epoxy compounds to create a uniform and level surface. Copper strips

should be made visible by grinding and not project more than 0.5mm above the floor level to prevent damage to the

PVC sheet, with one earthing lead brought out from every 150 sq.ft area and attached to the main earthing strip/ground.

The flooring should also be mechanically shockproof, scratchproof, flame retardant, and antimicrobial. Corners of the

flooring should be uniformly curved, and a concealed cove-former (aluminium) should overlap the wall panel to a

height of approximately 25mm and be sealed perfectly and uniformly. Before laying the PVC, suitable self-leveling

compounds should be used to prevent any undulations within the operating theatre. The final surface should be non-

corrosive to biological fluids and detergents, with a color that is uniform, pleasant, and matching with the ambience as

approved by the respective consignee.

SB Semo modular OT Page

Estimated Estimated Rates Total Amount

Estimated Estimated Rates Total Amount

may be Item Of Work Unit may be more

more or or less

less In Figure In word

The door to the surgical theatre should be a hermetically sealed, single sliding door measuring 2.1 meters in height and

meters in width. The door should be equipped with a controller capable of being operated by elbow switches, foot switches, and

a touchless sensor, providing multiple, accessible control options. The track for the door should be made from stainless steel or

aluminum, with the running surface for the top rollers angled appropriately to minimize resistance and facilitate smoother

movement. The door leaf should be suspended using high-quality hard plastic rollers with double bearings at the top. These

rollers should run under the stainless steel or aluminum track to ensure smooth and noiseless operation. The opening and closing

mechanisms of the door should be controlled by a microprocessor for precise electromechanical movement. The material of the

door should be either SMS or HPL, with a color that matches the interior design. The door should be designed to be strong yet

lightweight for ease of use. In case the automatic mechanism fails, the door should still be able to open and close effortlessly

manually. The handle of the door should be made from stainless steel with a matte finish and equipped with a high-quality

cylindrical or ESPg lock for security. The door leaf should incorporate a high-quality synthetic rubber gasket with long

durability to ensure hermetic sealing and maintain a 99.99% air tightness at a minimum pressure of 75Pa. The floor on either

side of the door should be perfectly level, with a maximum permissible difference of +1mm, to avoid any tripping hazards or

3 2.00 unsealed gaps. The overall thickness of the finished door should range from 30-60mm, with the inner part of the door filled with 295000.00 Rupees Two Lakh NinetyFive Thousand Only Nos.

CFC-free polyurethane foam, approximately 48mm thick, sealed airtight to block any microbial ingress. The door and its controls

should comply with IEE regulations, utilizing DC brushless or PMDC motors that are effectively isolated from mains power to

ensure safety and reliability. Additionally, the door should include a vision window measuring 300mm x 300mm, featuring

double-glazed panels that are hermetically sealed to maintain the integrity of the seal.

The movement of the door should be as quiet as possible, and the time to start moving after

receiving a signal should be adjustable between 0.5 to 20 seconds.The door controller should be CE marked, BIS certified, or

IEC 60601 certified to meet international and national safety standards. A test certificate for the hermetically sealed door frame

should be included in the pre-dispatch documents to verify compliance with the specified standards and functionality.

Hatch boxes should be provided in each operating theater to facilitate the safe and efficient removal of waste materials

to the dirty linen area or adjacent corridor. Each hatch box should be equipped with two doors, operated electrically or

motorized, designed such that only one door can be opened at a time to prevent cross-contamination. UV lighting

4 2.00 should be installed to ensure sterilization and should remain on when both doors are closed, automatically turning off 115000.00 Rupees One Lakh Fifteen Thousand Only Nos.

when either door is opened. Indicators should be provided on both sides of the operating theater to monitor the door

open/close status. The material of the hatch box should also be SS304 grade stainless steel, with a minimum size of

Supply, Installation, Testing and Commissioning of Storage Units - Storage units should be constructed with same

material, as wall and ceiling panels. The shelves, made of glass and, should be removable for cleaning. The unit should

5 3.00 be divided into two or more parts, each with individual glass doors equipped with a high-quality locking system. The 85000.00 Rupees EightyFive Thousand Only Nos.

overall size of the storage unit should

be approximately 200 cm (H) x 120 cm (W) x 35 cm (D).

SB Semo modular OT Page

Estimated Estimated Rates Total Amount

Estimated Estimated Rates Total Amount

may be Item Of Work Unit may be more

more or or less

less In Figure In word

Supply, Installation, Testing and Commissioning of Double-Bay Scrub Sink - The scrub station should be compact,

designed for use in the OT complex, and facilitate pre-procedural scrubbing. It should be made from heavy gauge type

304 stainless steel with a minimum thickness of 1.5mm and feature seamless welded construction polished to a satin

finish. The scrub sink should have a front access panel for easy maintenance of water control valves, waste

6 1.00 connections, stoppers, and strainers. Hands-free operation should be enabled through infrared sensors with 126000.00 Rupees One Lakh TwentySix Thousand Only Nos.

programmable adjustments. Thermostatic mixing valve control should maintain constant water temperature and be

located behind the access panel. Timing should be adjustable to meet individual usage requirements, and units should

have reduced anti-splash fronts. An additional knee/foot-operated switch should also be provided for enhanced

AIR HENDALING UNIT Make:KrVelocity: Not More Then 10 mt/second. , Canvass Connection-Heavy duty, non

partical shreding,Fire Retardentuger,Nikotra only , Type: PLUG,Drirect Driven,Dynamically Balanced Selection of fan-

Should run comfortably at 50 HZ at rated capecity. Motor Make:Siemence,B.B,Crompton,ABB , Type:TEFC, IP:55,

Foot Mounted, VFD compitable and I2 generation Safety: Motor should have interlocked with AHU Motor

door/excess/Fire DamperType-TWO TIRE, Floor Mounted , Inner const.:0.6mm plain G.I , Outer const.:0.8 mm G.I. Rupees Twelve Lakh TwentyFive Thousand

7 2.00 Pre coated / Powder coated Thickness of Insulation: 25mm,PUF injected having density 40 to 42 kg/m3. ,Colour:As 1225000.00 job

approved by CLIENT CONDENSING UNIT :

Condensing unit for AHU with all assesories and instalation (Copper pipie provide 3 mtr Only Extra will charged

extra) consider 1200 sqfeet insulation and ducting

Double Dome OT Light with Ceiling mounted Double Dome LED OT lights having following features and enclosed

technical specifications, having Mobile App Connectivity, Battery Backup

-Light intensity Ec - 160 000 & 160 000 lux, - Light intensity adjustment - 10 – 100% (using Digital Capacitive Touch

(Fully Remote Controlled)

- Color temperature Tc (with adjustment)

-Light field diameter d10 at Ec - 100 - 150 mm

-Working range - 1 m

8 2.00 390000.00 Rupees Three Lakh Ninety Thousand Only Nos.

-Color rendering index 93Ra

- Focusing Preset: Adjustable

- LED Average life - 50000-60000 hrs

- Diameter of Light - not less than 650 mm per dome

- Power Consumption - not more than 120W

OT Light should be BIS marked; manufacturer should have CDSCO License for this product under Class A, Compliant

to IEC standards such as IEC60601-1:2005+A2:2020, IEC 60601-2-41:201 (Relevant Test Certificates to be submitted

with Bid) Clause-wise Technical Compliance to be

SB Semo modular OT Page

Estimated Estimated Rates Total Amount

Estimated Estimated Rates Total Amount

may be Item Of Work Unit may be more

more or or less

less In Figure In word

Single-arm surgery/anesthesia pendant designed for Operating Theatres should feature a compact, modular

configuration to meet the precise requirements of hospitals, enabling customization to suit specific operational needs of

both Operating Theatres and Intensive Care Units. It should be equipped with robust ceiling support capable of

mounting a selection of arms. The extension arm, pivotal for functionality, should allow horizontal movement with a

radius of 800-900mm and provide a level rotation ranging from 0 to 330/340 degrees, with both the extension arm and

terminal box designed to rotate together and independently for maximum versatility. The pendant should support a net

loading capacity of min. 100 kg, accommodating a variety of medical instruments and devices securely. For medical

and electrical services, it should offer configurations that include at least two oxygen outlets, two vacuum outlets, one

medical air, one medical air at 7 bar, and an optional nitrous oxide outlet (In-scope of MGPS vendor) Additionally,

9 2.00 there should be six main sockets, each capable of supporting 5 to 15 amps, conforming to universal standards to 284000.00 Rupees Two Lakh EightyFour Thousand Only Nos.

facilitate the operation of various medical and electronic devices. In terms of materials and construction, the pendant

should be crafted from high-strength aluminum alloy with a sealed design to enhance durability and maintain sterile

conditions. The arm itself should be made from high-density aluminum alloy extrusion, ensuring both strength and

reliability. Installation of the pendant should be ceiling-mounted to provide a reliable and firm setup, optimizing space

usage in the Operating Theatre or ICU while seamlessly integrating with existing medical systems for managing

medical gas, electrical services, data communication, and equipment. Additionally, the pendant should include practical

features such as a stainless steel IV pole and a ward vacuum unit clamp to further enhance its utility in a medical

setting. With a net weight of approximately 105 kg, accessible by the equipment carrier, the pendant should be robust

yet manageable, ensuring it meets the rigorous demands of modern medical environments.

In Words :- Rupees SixtySix Lakh NinetyThree Thousand Nine Hundred SeventyFour Only

1 The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in

S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost

of difference of cement consumption have been deducted from the rate of original item at the rate of input rate mentioned in all the tender. Input rate is Rs. 5234/- per MT.

5 GST extra applicable in case of work based on SOR 2023-24 only.

6 Servicable materials available after Demolishing / Dismentalling any item should be hand over to the concerned as per instruction of PIU engineer in charge.

Dy. Executive Engineer Divisional Accountant Executive Engineer

PIU Zone-7 Surat PIU Zone-7 Surat PIU Zone-7 Surat

SB Semo modular OT Page