CERTAIN MISC REPAIR WORKS FOR POP AND REUNION UNDER AGE B/R-I AT IMA DEHRADUN.

Material and labour for preparation of road surfaces and applying thermoplastic reflective paint in marking of minimum 2.5mm thick single coat as in centre line and edge line road marking of 150/100 mm width thermoplastic paint (Hot application) white/ yellow by indigenous modern propelled road marking machine as directed including all ingredients such as blinder, glass beads Titanium dioxide calcium carbonate inter fillers, thermoplastic requirement for glass beads shall be the table No 800.4 of MORTH specification including spraying of glass beads and ermoving of existing old paint etc all as per manufacture instructions complete all as specified and directed.

S&F, in repairs, Solar road stud having 3 LED's of colours red/yellow/blue/green tough pressure dia casted aluminium alloy of size 125x125mm height 20mm fixing with epoxy, LED's solar cells battery & light sensor well protected in side under tough unbreakable poly carbonate transparent sheet roof system workable for 3-4 (nights) after full charge by Solar in 8-10hours including removal of old unserviceable stud, complete all as directed. Make as approved by GE.

S&F, in repairs, cat eye's dual directional reflective of tough poly carbonate of retro reflective glass beads of colour white/red/yellow side provided with including removal of old unserviceable stud, complete all as directed. Make: Shakti, 3M, Tata BP solar, Dark eye.

S&F, in repairs, high intensity grade shedding retro reflective delinator post 75 mm outer dia, heavy duty steel pipe 1.2 m long head cap by hydraulic machine design and hold fast welded on delineator post bottom with one one coat of red oxide paint and two coats of stove enameled paint by heat process and three Nos reflective bands of white, red & yellow colour and covered by 14 gauge net grill and welded complete all as specified embedded in ground in 30x30x40cm deep pit (including excavation and removal of soil) filled with PCC 1:2:4 type B-1(using 20 mm graded crushed stone aggregate) and up to 30 cm high above ground level including necessary form work, two coats of cement base paint on concrete base, removal of old unserviceable delinator complete all as spd and directed. Make: Shakti, 3M, Tata BP solar, Dark eye

M&L for Brick work with sub class 'B' bricks (old size) straight or curved on plan exc 6.00m mean radius built in cement mortar (1:6) including demolition of existing brick work complete all as specified and directed.

M&L for Brick work with sub class 'B' bricks (except bricks) straight or curved on plan exc 6.00m mean radius built in cement mortar (1:6).

M&L Random rubble masonry built in cement mortar 1:6, uncoursed, well bonded, bedded and solidly hearted including demolition complete all as specified and directed.

All as per ser item No above but except stones and demolition complete all as specified and directed.

M&L for PCC type C-1 1:3:6 (using 20 mm graded crushed stone aggregate) as in surface channel and drain beads including all necessary form work including demolition complete all as specified and directed.

Extra performing fair finished drain or channels cement concrete using extra cement including forms, mould, mitied/ stopped ends etc. complete all as specified and directed.