S/R to S.I.Qtr. At Baria

Earth work in excavation in Hard soil upto 3.00mtr depth with initial lead and lift including dressing and levelling the bed complete .s per direction of the Engineer-in-charge.as per direction of the Engineer-in-Charge as per approved specification.

Sand filling as per approved drawing and technical specifications as per Section 2100 of MoRT&H Specifications for Road & Bridge works (4th Revision) complete as per direction of the Engineer-in-charge.as per direction of the Engineer-in-Charge as per approved specification.

Plain cement concrete (1:4:8) nominal mix in foundation as per Drawing and Technical Specification complete as per direction of the Engineer-in-charge.as per direction of the Engineer-in-Charge as per approved specification.

Brick work with Flyash bricks 25cm x 12cm x 8cm size having crushing strength not less than 75kg/cm2 with dimensional tolerance ±8 percent in cement mortar (1:6) in Foundation & Plinthwith portlabd slag cement (PSC) immersing the bricks for minimum 6 hours in water before use with necessary projections, splays, cutting, circular moulding, corbelling etc. inclduing cost, conveyance, taxes, royalites, loading and unloading of all materials and all labour for scaffolding, watering and curing, sundries, T&P etc complete as per direction of the Engineer-in-Charge as per approved specification.

Brick work with Flyash bricks 25cm x 12cm x 8cm size having crushing strength not less than 75kg/cm2 with dimensional tolerance ±8 percent in cement mortar (1:6) in Super structure with portlabd slag cement (PSC) immersing the bricks for minimum 6 hours in water before use with necessary projections, splays, cutting, circular moulding, corbelling etc. inclduing cost, conveyance, taxes, royalites, loading and unloading of all materials and all labour for scaffolding, watering and curing, sundries, T&P etc complete as per direction of the Engineer-in-Charge as per approved specification.

Supplying and fixing A C sheet with ridges including supply of A C sheet, nut & bolts, bitumen washers, labour charges, cariiage, royalty & taxes as per applicable as per direction of the Engineer-in-Charge.

Removing old lime or cement plaster from walls including racking out joints 12mm deep and removing the debris within intial lead & lift of 50 m and 150 respectively complete as per direction of the Engineer-inCharge as per approved specification

16mm thick cement plaster on the rough side of brick masonry wall with cement mortar of mix (1:6) using portland stag cement (IS 455) with inclduing raking out joints to a depth of 12mm, scrapping and cleaning the surface and finishing the plastered surface smooth to proper plumbs and level as per direction of the Engineer-in-Charge including cost of all materials, conveyance loading and unloading, all taxes and royalities, all labour for scaffolding, watering and curing, sundries and T&P etc complete as per direction of the Engineer-in-Charge as per approved specification.

Distempering two coats inside walls with approved make distemper ao approved shed on new work to givean even shed including cost of all materials with taxes, all labour, scaffoldings, sundries T&P etc complete as per direction of the Engineer-inCharge as per approved specification.

Supplying, fitting, fixing of Vitrified tiles (60cm x 60cm: colour) in dadoo in all floors over 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including cost, conveyance and taxes of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge.

Painting two coats with approved weather seal paints of approved colour, shade on wall surface over a coat of wall primer including sand papering, polishing the surface, cost, conveyances, taxes of all materials and cost of all labour with T&P etc, complete as per specification & direction of Engineer-in-charge.

Supplying of M.S.Doors, M.S. Gate etc including cutting, fabricating, cost, conveyance of all materials etc.complete as per the instruction of Engineer-in-Charge .

Painting two coats with approved paint on Iron/wood work with Enamel paint including cost of all materials with taxes, all labour, scaffolding, sundries T&P etc complete as per direction of the Engineer-in-Charge as per approved specification.