Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.7 LAccepted-AOC | L1 | Accepted-AOC Admitted Found Reasonable for Acceptance | |
| 2 | L2₹12.8 L+₹2.0 L (18.3%)Rejected-Finance JJ BHAVAN TC 10 1378 2 GN 31 CHENCHERY ROAD NALACHIRA PO TRIVANDRUM 695 015 | TRIVANDRUM | THIRUVANANTHAPURAM | KERALA | 695015 | L2 | Rejected-Finance Rejected L1 being accepted | |
| 3 | L3₹13.5 L+₹2.7 L (25.1%)Rejected-Finance MAGHAM RAMAPURAM LANE MUKKOLA P O TRIVANDRUM 695 044 | TRIVANDRUM | THIRUVANANTHAPURAM | KERALA | 695044 | L3 | Rejected-Finance Rejected L1 being accepted | |
| 4 | L4₹14.7 L+₹3.9 L (36.5%)Rejected-Finance HOUSE NO 105 PANTHEERMA VILLAI NEAR NELLIKKAVILLAI CSI CHURCH VELLAYAMBALAM VENCODE P O KANYAKUMARI DIST TAMIL NADU 629 171 | VENCODE | KANYAKUMARI | TAMIL NADU | 629171 | L4 | Rejected-Finance Rejected L1 being accepted |
Tender Value
₹15.1 L
EMD Value
₹30,120
Closing Date
20 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Army Trivandrum
Office of Garrison Engineer Army, Thirumala Post, Trivandrum-06
As per tender documents
2022_MES_539814_1
GE (ARMY) TVM 9470/E8
Open Tender
Civil Works
Item Rate
180 days
Trivandrum
As per NIT
8 documents required · 8 mandatory
₹500
GE Army Trivandrum
₹30,120
Yes
11 Oct 2022
21 Jul 2022
29 Aug 2022
22 Jul 2022
20 Aug 2022
6 Aug 2022
Amount
M&L for Washing,rubbing down and stopping of distempered surfaces and applying one coat of oil bound distemper to wall including preparation of surfaces etc complete all as specified and directed.
M&L for preparing old surfaces of wall and applying two coats of oil bound distemper over a coat of primer including complete removal of existing treatment etc complete all as specified and directed.
M&L for Applying one coat of acrylic exterior emulsion water proof painting including prepartion of old surfaces of wall (up to four storey bldg) as per manufactures instructions ) etc complete all as specified and directed.
M&L brooming down and preparing old surfaces of ceiling and applying one coat of white wash an old decorated surfaces of ceiling etc complete all as specified and directed.
M&L Brooming down and preparing old surfaces of ceiling and applying one coat of oil bound distemper etc complete all as specified and directed.
M&L for Preparation of old wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint (upto four storey building) etc complete all as specified and directed.
M&Lfor preparation of old surfaces of steel of any description over 10 cm width or grith and applying one coat of synthetic enamel paint , etc complete all as specified and directed.
Taking down of cement plaster of any description including hacking out of joints, hacking for key, scrubbing down with water etc etc complete all as specified and directed.
M&L for 15mm thick rendering in cement mortar 1:4 on fair faces of concrete surfaces finished even and smooth (without using extra cement) etc complete all as specified and directed.
M&L for 15mm thick rendering in cement mortar 1:6 on fair faces of concrete surfaces finished fair and smooth without using extra cement etc complete all as specified and directed.
M&L for 5mm thick rendering in cement mortar 1:3 on fair faces of concrete surfaces finished even and smooth (without using extra cement) etc complete all as specified and directed.
M&L for Preparation of new surfaces of ceiling, and applying three coats of white wash etc complete all as specified and directed.
M&L for applying two coats of Acrylic emulsion water proof paint including priming coat of exterior primer including prepartion of new surfaces of wall etc complete all as specified and directed.
M&L for two coats of oil bound distember over a coat of primer including prepartion of new plastered surfaces of wall etc complete all as specified and directed.
Taking down chowkats or frames exc. 1.5 Sqm but not exc. 4 Sqm each (without taking off shutters from the frame) etc complete all as specified and directed.
Taking down chowkats with shutters (without taking off shutters from the frame) not exc 1.5 Sqm each etc complete all as specified and directed.
S&F Solid PVC Door Frame of size 50 mm X 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S Square tube, including fixing in opening etc complete as per specification & drawing.
S&F Factory made solid PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, including fixing in the frame at site etc complete as per specification & drawing.
M&L for Plain, solid, straigh chowkats and frames of 2nd class hardwood wrought , framed rebated on the solid, rounded or chamfered, put togther with glue pinned at joints, etc complete all as specified and directed.
S & F Mild steel flats as in holdfast,grill support to door/window etc complete all as specified and directed.
M&L 2nd class hard wood 35 mm thick Plain framed panelled shutters (any number of panels ), with panels of timber flat on both sides(feather edged) or of veneered particle board medium density wood particle board medium density, wood particle board with commercial face veneers fitted to chowkats all as specified and directed.
S&F Aluminum door/windows using powder coated aluminum sections, including necessary joining cleats,glazing clips, rubber neoprene packing, handles aluminum snap beading screws etc powder coating of any colour (thickness of powder coating minimum 50 micron ) complete all as specified and directed.
S&F Door closer hydralulically regulated designation No 3 universal type, suitable for door shutters of 851 to 1000 mm width and weight between 61 to 80 Kg and fixed using aluminium extruded section all as specified and directed.
S&F Brass Mortice lock of 4 Levers, vertical type, of size 100mm etc complete all as specified and directed.
S&F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor (Overall length of cover plate 150mm) etc complete all as specified and directed.
S&F Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty etc complete all as specified and directed.
S&F 12mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to fimber frame work etc complete all as specified and directed.
M&L for Sheet glass ordinary quality and glazing with rubber neoprene packing in square exc 0.5 sqm in each pane 5.5 mm thick glass all as specified and directed .
M&L for preparation of new wooden surfaces and applying two coat of synthetic enemel paint over a coat of prink primer etc complete all as specified and directed.
S&F in repairs 100 mm butt hinges extruded aluminium alloy with galvanised mild steel hinge pin anodised , type C21complete complete all as specified and directed.
S&F Aluminum anodised, barrel tower bolts of extruded section, 150mm long etc complete all as specified and directed.
All as per item No 31 here-in-before but 200mm long
S&F Aluminum alloy anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast - aluminum alloy and fixed of 300mm long etc complete all as specified and directed.
S&F in repairs 150mm long aluminum handles cast type anodised etc complete all as specified and directed.
S&Fin repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads etc complete all as specified and directed.
M&L for sheet glass ordinary quality 3 mm thick and glazing with oil putty or wooden beads n.exc 0.50 sqm in each pane etc complete all as specified and directed.
S&F in repair Bib tap fancy type brass CP size 15mm dia of pipe with crutch or butterfly handle screwed down screwed for iron pipe or ferrule and fixed etc complete all as specified and directed.
S&F in repair PVC connection 15mm dia 450mm long with 02 Nos brass check nuts with washer etc complete all as specified and directed
S&F in repairs waste fittings brass chromium plated 32 mm/40mm dia for wash hand basin, glazedwore sinks etc with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed all as specified and directed
S&F in repairs viterous china wash basin, white flat back size 550mm x 400 mm including brackets with waste fitting pipe including cutting for and pinning in ends of brackets or erecting stand with grating fixing to floor making good, etc complete all as specified and directed.
S & F in repairs chromium plated brass shower roses 125 mm size with or without swivel joints including fixing to steel pipe or union. all as specified and directed.
Supply and fix in repairs PVC valveless, syphonic action type flushing cistern low level, white, with inlet, ball valve, float and handle incl brackets capacity 10 ltrs and connection to pipe complete etc complete all as specified and directed.
S & F in repair Pillar taps 15mm dia cast copper alloy with capstion heads, chromium plated , fancy type screwed down high pressure, with or without lettered 'Hot' or 'cold' with long screwed shanks and fly nuts screwed all as specified and directed.
S & F in repairs Stop valve 15 mm dia cast copper alloy,screwed down, high pressure fancy type, chromium plated with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed etc complete all as specified and directed.
S & F in repairs Stop valve cast copper alloy,screwed down, high pressure fancy type chromium plated with long shank and cup (concealed type) screwed both ends for 15mm dia iron pipe or for unions and fixed, all as specified by Engineer -in-Charge.
S&F in repair grating 125 mm dia with waste hole etc complete all as specified and directed.
S& F in repairs vitreous china squatting pan , 'orissa' pattern, size 580 X 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe ) including connection to trap, and to flushing pipe ,antisyphonage pipe, etc. complete includig making good to floor.
S&F in repair of viterious china wash down water closet pan (padestal pattern), superior fancy type white (excl fixing bolt, flushing cistern and flush type) incl connection to drain (or outgoing pipe) and to flushing pipe, anti syphonage etc with seat cover etc complete all as specified and directed.
S&F in repair plastic water closet seat cover any colour closed pattern with flat bottom and cover and mild steel chromium plated hinging device etc complete all as specified and directed.
S&F in repair Health faucet brass, CP with push bottom flexible PVC pipe with steel lining of 1 mtr long PVC chromium plated suitable for 15mm dia pipe etc complete all as specified and directed.
Taking down GI Tubing medium grade, removing 15 mm dia bore etc complete all as specified and directed.
Taking down GI Tubing, medium grade 20 mm dia bore ,etc complete etc all as specified and directed.
S&F UPVC pipes of pressure rating 10kgf/cm2 fixed to walls complete or laid in floors outer dia 15mm etc complete all as specified and directed.
All as per item No 55 here-in-before but for 20mm dia.
Demolition of wall and ceiling boards fibre, pulp, insulation, etc or insulation board/slabs/blankets, any thickness, including cover fillets etc complete all as specified and directed.
M&Lfor Non asbestos fibre cement building boards decorative type ,4mm thick fixed or laid/ inserted to timber/GI/Aluminium framework with screws on ceiling etc complete all as specified and directed.
M&L for Anodised aluminum snap grid frame work for false ceiling size 605 x 605 mm etc complete all as specified and directed.
S&F Plain mild steel wire,3.15 mm dia galvanised class 3,in detached work such as for mosquito nets and fixing to straining bolts, hooks, eyes, etc complete all as specified and directed.
S&F in repairs viterous china wash basin, oval type including brackets with waste fitting and pipe including cutting for and pinning in ends of brackets or erecting stand with grating fixing to floor and making good, etc complete all as specified and directed.
M & Lfor Granite 25mm thick (of any type ) work ( table rubbed and polished ) in steps , jambs , pillars , window cills , cooking plateform and like in cement mortar ( 1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite etc complete all as specified and directed.
Dismantling of single layer Mangalore pattern or similar tiles in roofing including ridge tiles etc complete all as specified and directed.
S&F Roof tiles , mangalore pattren, interlocking at side joints, laid dry (upto four storey building) complete all as specified and directed
All as per item No 64 here-in-before but except tiles.
S&F Ridge or hip tiles to suit mangalore pattern of roofing tiles, bedded and jointed in cement mortar 1:6 etc complete all as specified and directed.
All as per item No 66 here-in-before but except tiles.
M&L for rendering in CM 1:3, 10mm thick, mixed water proofing compound @ 3% by weight of cement finished even and smooth without using extra cement etc complete all as specified and directed. Note : Supply only WPC will be paid seperately.
Supply only integral water proofing compound.
Dismantling fillets for tiles battens, rafters, purlins etc under 40 sq.cm in section (framed work) all as specified and directed by engr-in-charge.
M&Lfor second class hard wood clean sawn plain fillets square, rectangular or triangular in section, secured with nails or brads sectional area exc 13 but n exc 25 sq.cm complete all as specified and directed .
All as per item 71 here-in-before but except fillets
S&F 110mm dia of PVC (SWR) pipes including bends/branch pipes single socketed in any length with rubber ring joints laid in trenches or in floors or fixed to walls includingTaking down cast iron pipes/ PVC pipe including fittings by burning out lead joints etc to facilitate dismmentling old serviceable fittings/pipe laid in trenches floors or fixed to walls all as directed including earth work. Demoltion of PCC/Brick work and making good to match with existing surfaces (upto four storey building) including necessary scaffolding etc complete all as specified and directed.
All as per item ser No.73 here-in-before but 160mm dia
Taking down existing aluminium door frames including shutter exc. 1.5 Sqm but not exc. 4 Sqm and re-fixing the same opening after carry out the necessary repair all as speified and directed
S & F in repairs worn out wooden pelmet boxes / cub board of 18/19 mm prelaminated particle board, exterior grade prelaminated one side with decorative choice lamination other side balancing white lamination, fixed with screws etc complete all as specified and directed.
All as per item ser 76 here-in-before but thickness of board 12 mm thick.
S&F Continuous (Piano) hinges, mild steel bright finished or electrogalvanised, width of flaps( when open) 40 mm etc complete all as specified and directed.
S&F Ball catches with 8mm dia steel ball, catches with 8mm dia steel ball and brass body and striking plate including in and fixed etc complete all as specified and directed.
Writing letters or figures(Block, Roman, Italic or Indian) not exc 30Cm high with thick paint so that they stand out boldly and solidly without showing brush marks etc complete all as specified and directed.
All as per item no 80 here-in-before but for rewritng or repainting of existing writing
M & L for one or more coat of French polishing on old wooden surfaces of any description, width or girth including cleaning and prepartion etc complete all as specified and directed.
M & L for preparing old plastered surfaces of wall or floor surfaces and applying one coat of terracota paint complete all as specified and directed.
Cutting/cleaning small trees, saplings,shrubs and under growth complete roots from brick walls,chajjas etc including taking out complete roots from inside walls/chajjas and making good surfaces in cement concrete 1:2:4 type B1 or in cement mortar (1:4) to match the existing surfaces all as specified (Upto four storey building) etc complete all as specified and directed.
S&F PVC ventilator fixed type with solid frame 45 mmx70 mm including louvers frosted glass of size3 mm thick including MS guard bar of 10 mm dia spacing 150 C/C and stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with PVC beading including painting to steel surfaces, etc complete all as specified and directed.
Taking down exterior steel windows by cutting of existing hinges and replacing with new hinges/parts including necessary welding,painting etc complete to make window shutter operational etc complete all as specified and directed.
JEETH CONSTRUCTION
B.LAMBODHARAN
DJ GROUP
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .