C/o Motorable Bridge at Giri River Between Chabyoga (Pachhad) to Shalamu (Rajgarh) District Sirmour H.P

Earth work in excavation for foundations of bridge structures including abutments, Piers, wing/return walls in all kinds of soil including soft rock in accordance with lines, levels,grades and cross-sections as shown in drawings and as per technical specifications including setting out providing and maintaining necessary shoring strutting and bracing dewatering where required removal and disposal of roots vegetation,stumps and other deleterious matter dressing of sides and bottom to correct profile and backfilling with approved material in layers including watering ramming and compaction to required density complete in all respects as per clause 304,305 .All earth work in cutting exccavation including rock excavation shall be carried out true to lines grades side slopes width,camber super elevation and level as shown on the drawings or as suitable sites and safe disposal of unsuitable cut materials in specified manner treaming filling of uneveveness blindage and finishing of the road to specified dimension or as directed by the Engineer-in- Charge.If the foundation of the structure is in an area with stagnant water or water is met with in the excavation due to spring seepage rain and other causes it sall be remove by suitable diversion bailing out or pumping as directed and the area of the the foundation or embankment shall be kept dry. The land for dumping sites shall be arranges by the contractors himself and nothing extra shall be paid on this account. Any loss to the public or private property during the course of excavation shall be the sole responsibility of the contractor which shall have to be duly compensated by him in all cases. The rates are uncluding all taxes imposed by the Govt. (Expect GST)

Providing and Constructing Driven cast-in-place vertical M35 (Grade Thirty Five) 20mm (Twenty millimeter Nominal size) R.C.C. Pile excluding Reinforcement complete as per Drawing and & Technical Specification.Clause 1100 &1700 The work shall include setting out, driving of casing/temporary casing (if required), boring/driving operations, cleaning of pile bore, placing of concrete through tremie method, withdrawal of casing, cutting of pile head to required level, and disposal of excavated material. The rate including the cost of formwork. The rate including octroi, royality, Malkana, toll tax, or other taxes but excluding GST imposed by the Government. including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.

Plain/Reinforced Cement Concrete M15 (Grade Fifteen) 40mm (Forty millimeter nominal size of aggregate ) in Open Foundation and below approach slab complete as per Drawing and Technical Specifications. Clause 1500, 1700 & 2100 including the cost of formwork. The rate including octroi, royality, Malkana, toll tax, or other taxes but excluding GST imposed by the Government. including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.

Providing and laying Plain/Reinforced Cement Concrete M35 ( Grade Thirty Five) 20mm (Twenty millimeter nominal size aggregate) in Open Foundation complete as per Drawing and Technical Specifications. clauses 1500, 1700 & 2100 including the cost of formwork. The rate including octroi, royality, Malkana, toll tax, or other taxes but excluding GST imposed by the Government. including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.

Supplying, fitting and placing HYSD (Fe 500) bar reinforcement in Foundation complete as per drawings and technical specifications Clauses 1600. The rate including octroi, royality, Malkana, toll tax, or other taxes but excluding GST imposed by the Government. including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.

Providing and laying Plain/Reinforced cement concrete Grade M 35 (Grade Thirty Five ) 20mm (Twenty millimeter nominal size aggregate) in sub-structure complete as per drawing and Technical Specifications Clause 1500, 1700 & 2200 including the cost of formwork. The rate including octroi, royality, Malkana, toll tax, or other taxes but excluding GST imposed by the Government. including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.

Providing and laying Plain/Reinforced cement concrete Grade M 40 (Grade Forty ) 20mm (Twenty millimeter nominal size aggregate) in sub-structure complete as per drawing and Technical Specifications Clause 1500, 1700 & 2200 including the cost of formwork . The rate including octroi, royality, Malkana, toll tax, or other taxes but excluding GST imposed by the Government. including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.

Supplying, fitting and placing HYSD (Fe 500) bar reinforcement in substructrue complete as per drawings and technical specification Clauses 1600 & 2200. The rate including octroi, royality, Malkana, toll tax, or other taxes but excluding GST imposed by the Government. including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.

Providing and laying back filling with boulder-stones as per specification to a thickness of not less than 600mm (six hundred miillimeter)with similar size towards the soils and bigger size towards the wall and providing over the entire surface behind abutment wing wall return walls; to the full height-compacted to firm condition complete as per drawing and technical specification Rural Road. The rate including octroi, royality, Malkana, toll tax, or other taxes but excluding GST imposed by the Government. including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.

Supplying, fitting and fixing in position true to line and level POT-PTFE bearing consisting of a metal piston supported by a disc or unreinforced elastomer confined within a metal cylinder, sealing rings, dust seals, PTFE surface sliding against stainless steel mating surface, complete assembly to be of cast steel/fabricated structural steel, metal and elastomer elements to be as per IRC: 83 part-I & II respectively and other parts conforming to BS: 5400, section 9.1 & 9.2 and clause 2006 of MoRTH Specifications complete as per drawing and approved Technical Specifications. The rate including octroi, royality, Malkana, toll tax, or other taxes but excluding GST imposed by the Government. including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.