SPECIAL REPAIRS TO BLDG NO T-15, T-17, T-18 AND T-30 OF FIELD HOSPITAL UNDER GE SHIKARGARH IN ARMY AREA JODHPUR

Amount

Demolition of cement concrete of any description and in any position not otherwise specifically provided for (such as copings, bands of any type, roof padding, kerbs etc overall thickness and removing the dust debris etc to a distance not exc 250 meter from site and disposing the same complete all as specified and as directed by Engineer in charge.

M&L for Cement concrete 1:2:4 type B-0, (using 12.5mm graded crushed stone aggregate) as in mass concrete etc., to make up undulations as in leveling course over roof with rough finished surfaces complete all as specified and as directed.

M&L for carrying out water proofing treatment for roofs in the following stages - (i) Rendering 10mm thick in 1:4 mixed with integral water proofing liquid all as per manufacturer's instructions over concrete surfaces finished even and smooth with out using extra cement. (ii) First coat of bitumen primer confirming to IS 3384 @0.300 Kg/ Sqm over plastered surfaces (iii) Second layer of 3.0 mm thick APP modified polymeric membrane with centre core of Single non woven polyster reinforcement and having weight 3.6 Kg/ Sqm with mineral gravel finish on top complete laid with blown type bitumen grade 85/25 @ 1.20 Kg/ Sqm complete all as specified and as directed.

Supply only Integral water proofing Liquid ISI Marked.

Taking down cement plaster of any description and in any position of brick/concrete surfaces on walls/celing etc. including racking out joints, hacking for key, scrubbing down with water etc & prepared to receive new plaster complete all as specified and directed.

Racking out joints/pointing to square rubble masonry Jodhpur type regular coursed built in cement mortar (1:3) complete all as specified and as directed.

M&L for 15 mm thick rendering / plastering in CM 1:6 on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing finished fair and even and smooth without using extra cement complete all as specified and as directed.

M&L for 15mm thick rendering/ plastering in CM 1:4 on stone masonary surfaces or other than fair face of stone work or on one side of lathing finished even and smooth complete all as specified and as directed.

M&L for rough cast rendering on wall surface over 10mm thick in CM 1:3 complete all as specified and as directed.

Preparing new plastered surfaces and material & labour for applying two coats of distemper oil emulsion on walls including over a coat of chalk whitening/ suitable primer etc., complete all as specified and as directed.

Preparing new plastered surfaces and material & labour for applying two coats of cement base paint on walls complete all as specified and as directed.

Preparation of old decorated plastered/ unplastered surfaces of ceiling and M&L applying one coat of white wash complete all as specified and as directed.

Preparation of old decorated plastered surfaces of walls, chajjas ,fascias roof projection etc and M&L applying one coat of cement base paint complete all as specified and as directed.

Demolition of concrete (unreinforced) in ground floor not exceeding 15cm thickness below or above ground level including floor finishes and removing debris from the site all as specified and as directed.

Dismantling glazed tiles/ kota stone/ terrazzo tiles any type as in dado/ skirting etc including cement mortar bedding ( but not backing ) complete all as specified and as directed.

M&L for 25mm thick cement concrete 1:2:4 type B-0 using 12.5 mm graded crushed stone aggregate as in floors/ leveling course to floors/ sub base under floors finished rough and prepared to receive floor finishes complete all as specified and as directed.

M&L for machine cut Kota stone slab as in flooring 18mm (+ 2mm) thick laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:6), set and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing, cutting and polishing (mirror type) complete all as specified and as directed.

M&L for machine cut Kota stone slab as in skirting, dado of length not less than 500 mm each unit, 18mm (+ 2mm) thick laid over & including 10 mm thick screed bed of rendering in cement mortar (1:4), set and jointed in cement slurry mixed with pigment to match the shade of slab including rubbing, cutting and polishing (mirror type) complete all as specified.

M&L for machine cut pre polished (mirror type) Kota stone slab as in window cills 18mm (+ 2mm) thick laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:4 set and jointed in cement slurry mixed with pigment to match the shade of slab including rubbing, cutting etc; complete all as specified.

Rounding of or moulding to edge (half round) of stone of any description including rubbing and polishing (Granite/ mirror finish) complete all as specified and as directed.

M&L for Jodhpur stone slab patti 40 to 50mm thick set in over and including 15mm thick cm 1:4 and jointed & pointed in neat cement slurry as in floors, plinth protection, steps etc; complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor not exceeding 15cm thickness below or above ground level including floor finishes and removing debris from the site all as specified and as directed.

M&L for 75mm thick PCC 1:4:8 type D-2, (40mm graded stone aggregate) as in sub floor, sub bases, floor and paving etc; complete all as specified and as directed.

M&L for 60mm thick factory made pre cast cement concrete rubber moulded laquer finish using chemical and admixture inter locking tiles having compressive strength not less than 350 kg/ Sqcm, of shape and colour as approved by GE , laid over and including 25mm thick compacted approved sand cushioned surface, joints filled by fine sand and compacting the top surfaces of paver blocks after laid etc of approved make all as specified and as directed.

M&L for factory made precast cement concrete solid blocks M-30 Grade, using 20 mm graded crushed stone aggregate as in kerb stones of any size (with plain or interlocking joints as directed) set in cement mortar 1:4 for path edgings etc; embedded in position including all necessary excavation, tamping ground arround blocks and removal of rubbish/ surplus soil etc., complete all as specified and directed by Engineer-in-Charge.

M&L for cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in kerbs or benching etc including necessary form work complete all as specified and as directed.

M&L for Jodhpur stone roof slabs, self faced 7.5cm to 10cm thick, 25cm to 35cm wide, hoisted and set, jointed and grouted in lime mortar 1:3 or cement mortar 1:6 complete all as specified and as directed.

Taking down chowkats or frames of any description exc 1.5 Sqm and n.exc. 4.00 Sqm each (without taking off shutter from the frames) including cutting hole to size to receive fresh PCC / block for inserting hold fast and making good the disturbed surface with PCC 1:2:4 or CM 1:3 as required at site after insertion of hold fast complete all as specified and as directed.

Taking down chowkats or frames of any description n.exc 1.5 Sqm each (without taking off shutter from the frames) including cutting hole to size to receive fresh PCC / block for inserting hold fast and making good the disturbed surface with PCC 1:2:4 or CM 1:3 as required at site after insertion of hold fast complete all as specified and as directed.

Pressed steel framed made out of 1.25mm thick MS sheet, of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, complete all as specified and directed.

M&L cement concrete (1:3:6), type C-1 using 20mm graded stone aggregate as in filling of steel chowkhats including necessary form work complete all as specified.

S&F 35mm thick factory made flush door shutter, solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S&F 35 mm thick factory made, 2nd class hard wood , glazed and skeleton door shutters open rebated and prepared to receive glass/ gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass etc , size of members of shutters as specified in clause 8.24 (a) of MES Schedule Part-I Section-8, kiln seasoned and chemically pressure treated and fitted to chowkats complete all as specified and as directed.

S&F for mild steel barrel tower bolts, stove enameled black, with bright bolt, 200 mm long and fixed with steel screws complete all as specified.

S&F for 250mm long mild steel, sliding door bolt, plate/ bolt type, stove enameled black, with bright bolt not less than 12mm dia with and including a minimum six bolts and nuts, four on bolt plate and two on staple plate complete all as specified.

S&F for 150 mm size mild steel pressed handle oval type stove enameled black complete all as specified and as directed.

S&F for half round door stopper (6 to 7cm long double rod/ plate) of aluminium alloy body and tongue, anodised with rubber nosing including fixed to door with four Nos screws etc; complete all as specified and as directed.

S&F 125mm size single action spring hinge bright finished body of mild steel with steel wire spring heavy duty all as per the samples of Make : YANE/ EVERBRITE or equivalent complete all as specified and as directed.

S&F of Factory made steel window box type using ERW hollow 'P' section comprising double frame for and including gauged and glazed Skeleton shutter jointed internally with flat iron 40x4mm complete including grill of 8/10mm square bars as directed by Engineer in charge, fixed horizontally @ 10cm c/c, hinges, handle, tower bolts, stops, lugs etc. all as shown on drawing No CEJZ/TD/20 sheet 1/3 to 3/3 complete all as specified and directed. Note: Guard bar/ grill shall be measured and paid separately under respective item of Sch 'A'.

S&F for mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks, cooler stand ,support using Angle Iron,MS Flat Iron, tubular section etc and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

S&F Sheet glass ordinary quality 4 mm thick and glazing with oil putty or fixed with wooden beads or fixed with rubber gasket in squares any size of pane complete all as specified & as directed.

S&F for galvanised mild steel wire cloth,0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples all as specified and as directed.

Decorative mild steel curtain rods 32mm dia (powder/ PVC coated) including fixing brackets & side cups complete fixed in repairs i.e., including taking down the existing unserviceable curtain rods complete all as specified and directed

Preparing new or previously untreated surfaces of wood and wood based material of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

Preparing new or previously untreated surfaces of steel or iron work of any description and girth over 10cm and applying two coats of synthetic enamel paint complete all as specified and as directed by Engineer in charge.

M&L for mild steel framed work as in brackets MS angle iron nut & bolts etc conforming to Fe 410- W ( Gde E-250) quality A complete

Taking down carefully copper/Aluminium point wiring including (light, fan, socket or power complete fittings, such as switches, ceiling roses, pendant holders, Batten holders, shades concial fan regulators, light or power sockets etc) removing materials from site all as directed.

Taking down carefully UNSV main switch and DB's including MCBs of any size make, type and capacity all as directed.

M&L for One light/Fan point controlled by one /way switch, point wiring complete with multistrnaded copper conductor 1.5 sqmm size PVC insulated FRLS unsheathed cable 1100 volt grade, conforming IS 694 & color code , drawn in including PVC casing capping suitable capacity , making food disturbed surface complete, sunk in pressed steel terminal boxes of required size not less than 1.6 mm thick factory made and factory painted with top cover 3 mm thick plastic laminated sheet fixed with brass screw and washer with all accessories including single core solid conductor copper 1.5 sqmm size solid PVC insulated unshethed cable as earth wire to common earth and connected to earth dolly drawn in same conduit complete all as specified.

.-ditto- as per items No 49 but One 3 Pin 5 Amps socket outlet on same board

.-ditto- as per items No 49 but One 3 Pin 5 Amps socket outlet on independent board.

.-ditto- as per items No 49 but using 2.5 Sqmm PVC insulated, unsheathed cable for one 3 Pin socket outlet 15 Amps on independent board.

S&F 20/ 22 Watt LED Batten with extruded aluminium housing With in Built LED strip, LED shall be having LM80 complied as per L70 standard leds with 6000-6500k CCT, Maximum power consumption shall be 20/22 Watt with min, 1800 system lumens, 3 stage CCCV driver with voltage range of 150-270 AC and DC output operating voltage of driver should be complied to SELV norms not exceeding 72 DC only . All as specified & directed by Engr-in-Charge .. Make :- WIPRO/BAJAJ/PHILPS.

S&F connecting, and commissioning of Wall Light fixture 60 watt LED, IP-66 protected ingle piece Die-cast aluminum housing and heat sink having heat resistive toughened glass at bottom. individual LED shall be having LM-80 complied as per L70 standard LEDs with 5700-6000K CCT. Optics shall be with proper distribution having lenses of either PMMA of polycarbonate material. Maximum power consumption shall be 60 Watt with min 6000 system lumens. 3 stage CCCV driver with min, 4kv surge protection voltage range of 150-270V AC and DC output operating voltage of driver should be complied to SELV norms not exceeding 72 DC only. and including 40 mm light grade pipe and MS clamp with nut & bolt all as specified as directed by Engir-in-Charge.

Supply and fixing switch piano, flush type ,single pole one way 5/6 Amps 240 Volts. Make : LEGRAND/GM/SSK

S/F switch socket combination 2 in 1, 3 Pin, and 5 Amp flush type universal. Make : LEGRAND/GM/SSK

S&F switch socket combination 2 in 1,5 Pin 5 and 15/16 Amp flush shuttered type ISI mark. complete all as specified and as directed.

S/F ceiling rose surface bakelite three terminal 65 x 50 mm three terminal 250/230 volts ISI marked complete all as specified and as directed.

Supply and fixing, Distribution board (concealed flush to wall), , double door type in sheet metal enclosure when MCB to be used with 200 A rated copper bus bar confirming to relevant IS TPN 8 way complete all as specified.

S&F MCB SPN 6-32 Amps,240 Volts `C` Curve

S&F MCB SP 6-32 Amps,240 Volts `C` Curve

Supply and Fix stepped type electrnic fan regulator flush type on the existing phenolic laminated sheet all as directed,

M&L for Earthing complete with GI steel earth plate eletrode 60 cm X 60 cm X 6.0 mm thick barried directly in ground vertically to a depth not less than 2.25 metres below ground level with top edge of earth plate at a depth not less than 1.5 metres below level ground, connected to Gl iron or steel earth strip 32mmx6mm by means of nuts, bolts checks nuts and washers made of Gl iron or steel earth strip protected by Gl iron pipe 40 mm bore, medium grade and connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6:) type C1, pre-cast RCC cover slab 30 cm X30 cm X 10 cm with one lifting handle made of 8 mm dia ms bar funnel wire mesh,20mm bore GI or steel pipe medium grade for watering, charcoal or coke and salt in alternate larges, necessary excavation and earth work in any type of soil complete all as shown in electrical plate No 3 of MES schedule part-I and testing after completion. complete all as specified and as directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth and getting out in soft/loose soil for removing/laying of cable etc as directed by Engineer-In-Charge.

Returning, filling excavated soil in trenches including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick each all as directed by Engineer-In-Charge.

Removing of surplus excavated spoil not exceeding 50 M distance and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified.

M&L filling in trenches with fine sand cushioning for LT UG cable including compacting after filling complete all as specified and directed. Note : sand to be filled 23cm and carefully punned to 18 cm thickness. Punned thickness will be measured for the purpose of payment.

Supply and laying 40 to 50 mm thick roughly hammer dressed Jodhpur stone slab cover 25 cm to 30 cm wide and not less than 60 cm long dry laid aboutting each other with gap between adjacenet slabs not exceeding 10 mm for underground cable for protection.

Supply and laying in trenches/fixed on walls/poles of passing through pipe, PVC insulated armoured heavy duty LT U/G electric cable with aluminium conductor 1100 volts grade with suitable cable glands and lugs etc as required of following sizes:-(a) 25 Sqmm x 4 core

Supply and fix GI tubing light grade for protection of cable at wall/trench with fixing accessories as directed of following sizes:-(a) 40 mm dia

S&F ceiling fan 1200 mm sweep complete with all accessories including fan blades of white colour & electronic fan regulator, 5 star rated, connecting up complete with including three core flexible PVC insulated multi stranded copper conductor of size 1.0 sqmm from ceiling rose/connector to fan (earth wire to connected to fan hook), Model: Bajaj/Havells/Khaitan.

Supply and fix GI Tubes, 32mm dia 'light grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

KRISHNA CONSTRUCTION COMPANY

m/s Firoz khan

Shri Ram Traders Co

SHRI BHIKSHU ART AND CONSTRUCTION CO

AB Constructions

Dwarka Enterprises

Hariom Construction Company

Bhagwati Construction Company

M/S gayatri construction company

HOODA CONSTRUCTION COMPANY

M/S Dharam Chand Lal Chand Jain