Renovation of Varanippalam in Malampuzha Grama Panchayath, Palakkad District.

Amount

CIVIL WORK

15.3 : Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge.

5.1.2 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size

5.9.6 : Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts

5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

85.101 : Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

9.48.1 : Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by welding

85.102 : Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

85.103 : Supply of MS checquered plates including cost of conveyance charges

50.10.1 : Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

od130268/2021_2022 : Fabrication structural steel confirming to IS2062Gr for bridge structures including drilling for bolt holes as per approved specifications, drawings and directions of departmental officer at site including cost of labour, machinery, incidental and handling charges for fixing handrails and allied works etc complete but excluding cost of material already supplied

od130290/2021_2022 : Erection bridge unit in galvanised structural steel including straightening by bolting as per approved specifications, drawings and directions of departmental officer at site including cost of labour, machinery, consumables, incidental and handling charges for fixing and allied works etc complete but excluding cost of galvanised materials, bolts etc

FINISHING WORK

13.50.3 : Applying priming coat:With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron /steel works

13.52.1 : Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work

PROVISION FOR NAME BOARD

od130498/2021_2022 : Supplying and fixing Granite board size of 0.60mX 0.45 m, fixing with CC 1:2:4 including all charges

CEMENT: Cement make: Use Malabar cement only as per Govt. direction and in case of non availabilty of Malabar cement use Ultra Tech, Dalmia, Ramco or eq. brand in the order of preference.

RCC: (Assessment of strength of concrete by Cube testing at Approved Govt labs as per IS) Cement make: Use Malabar cement only as per Govt. direction and in case of non availabilty of Malabar cement use Ultra Tech, Dalmia, Ramco or eq. brand in the order of preference.

STEEL REINFORCEMENT: Make: Tata,Vaishak, SAIL, JSW or eq primary make in the order of preference

CENTERING & SHUTTERING: (Centering and shuttering for different category of work may be considered separately.)

Epoxy paint : Make: Asian, Berger, Nerolas or eq. in the order of pref.

MS structurals as per IS2062: 1999, IS808 :1989

Note :1 All materials, Items, Equipment shall be best branded items with IS and approved by client/KEL

2:Rate is inclusive of installation, testing and commissioning cost for all items

3.Rate isExclusive of GST.

4.Work should be executed as per DSR/PWD/Irrigation Dept. specification and direction of Engineer at site.

P MOHAMMED