Renovation of kichen at TRH Holiday Home Almora

Supplying and fixing Single Stock Pot SS 600x600x850

Supplying and fixing Single Sink Unit SS 450x600x850

Supplying and fixing Dobule Burner Range SS 1200x600x850

Supplying and fixing Hood wtith Filter 1800x600x450

Supplying and fixing Hood wtith Filter 1500x600x450

Supplying and fixing SS Hood Ducting Line 450x450x2400

Supplying and fixing Tow Door Under Caunter Chiller SS

Supplying and fixing SS Hot Bain Marie with 6 Pan

Supplying and fixing Pik up Counter SS1200x600c850

Supplying and fixing SS Tandoor

Supplying and fixing SS Refrigertor Under Counter

Supplying and fixing SS Oven Under Counter

Supplying and fixing SS Work Table 2 under self Size 1200x600x850mm

Supplying and fixing Cabinet in HDHMR Board 1 s.q.fit

Supplying and fixing SS Clean Dish Table 1050x600x850

Supplying and fixing SS Dish Rack with 5 Shelf 1800x600x850

Supplying and fixing SS Three Sink units 1800x600x850

Supplying and fixing SS Garbage bin 80 Lit

Supplying and fixing SS Rack for Grocery 3 Shelf 1800x1200x300mm

Supplying and fixing SS Rack 5 Shelf 900x450x1800mm

Supplying and fixing Cylinder Trolley

Supplying and fixing 12 mm toughened glass

Supplying and fixing LPG gas line fitting with 20psi controller and connector

5.1.2 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement -All work up to plinth level : (1 cement : 1.5 coarse sand (zone-Ill) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

4.1.8 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1 :4:8 (1 Cement : 4 coarse sand (zone-Ill) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)

7.1.1 Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1 :6:12 (1 cement: 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1 :6 (1 cement: 6 coarse sand)

16.68 Providing and laying 60 mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.

6.4.2 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1 :4 (1 cement: 4 coarse sand) Cement mortar 1 :6 (1 cement: 6 coarse sand)

11.46.3 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1 :3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 800x800 mm

Providing and fixing pine wooden false ceiling

9.147.A1 .1 Providing and fixing factory made uPVC glazed/wire mesh windows/ doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and lnline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusionwelded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh I Glazing of plain/ toughened/ laminated/ double glass unit with I without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately. Note:- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for (i) Sites with basic wind speed > 45 m/sec as per IS 875 - Part 3 (ii) Sites with structure height more than 20m for all wind speeds 9.147.A1 Two track two panels sliding window with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body. Using R2 series with frame (40 mm & above) x (40 mm & above) & sash (25 mm & above) x (50 mm & above) with zinc alloy (zamak) powder coated touch locks with hook (Height upto 1.2 metre).

13.46.1Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm)

13.114 Melamine polishing on wood work (one or more coat).

Supplying and fixing vanity For wash basin

Supplying and fixing wash Basin Jaguar

Please Enable Macros to View BoQ information