State Plan 2018-19 UWSS to Ottapalam - Replacement o old and damaged AC/ GI80mm to 300mm using 300mm DI K9- 1250m, 160mm PVC - 20290m, 150mm GI-4020m at various locations in Ottapalam Municipality in Palakkad District-Balance Works.

Amount

Working Charge

100.1.1:Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed, within a lead of 50m, in all kinds of soil.

100.1.5:Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed, within a lead of 50 m, in Ordinary Rock.

15.43.2:Dismantling manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer -in-Charge:Bituminous road

100.8.1:Fencing one side of trenches, 1.50m height with two rows of 10cm plastic caution tape in vertical casuarina pole (girth 15cm to 24cm) fixed at 2m intervals.

100.25.7:Cutting of 300mm AC pipes of all classes diametrically, the cut being diametrically perpendicular to the axis of pipe and smoothening of the cut ends etc., complete.

100.9.11:Laying uPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipeline to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipeline with water to the required test pressure (excluding cost of pipes and specials): 160 mm nominal outside diameter pipes.

100.12.11:Conveying and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc., but excluding cost of pipes and fittings for External work: 150mm diameter nominal bore.

100.12.2:Conveying and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc., but excluding cost of pipes and fittings for External work: 20mm diameter nominal bore.

100.31.2.4:Conveying and fixing C.I. sluice valves (with cap) by providing bolts, nuts, rubber insertions etc., complete, but excluding the cost of the valve (tail pieces, if required, will be paid separately): 150mm diameter, Class II.

100.31.1.1:Conveying and fixing C.I. sluice valves (with cap) by providing bolts, nuts, rubber insertions etc., complete, but excluding the cost of the valve (tail pieces, if required, will be paid separately): 80mm diameter, Class I.

OD28133/2023-2024:Fixing 25 mm CI Air valve using 25mm GI pipes and specialsand 160x32 mm PVC Saddle after necessary earth work excavation including charges for conveying, cutting, laying and jointing the pipe with specials,charges for bailing out water and providing caution boards, conveying suitable size AC/PVC pipe from the section store for protection, refilling the trench etc. complete but excluding the cost fof Air valve, GI pipe, specials and protection tube.

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

OD28135/2023-2024:Reinstating water service connection ( up to consumer premises) from the newly laid distribution line using suitable size ISI marked brand new PVC/GI/MS saddle piece after necessary earth work excavation in all kinds of soil and refilling the trench, including all cost for conveying, cutting, threading, laying, jointing the 20 mm ASTM (Sch. 80) GI (M) pipe and specials such as bends, unions, GM valve etc. excluding the cost of pipes and specials(including cost of PVC specials from 140mm to 75mm)

100.41.39:Supply, stacking, spreading and consolidating of Quarry Muck in the trench of pipe line, including carriage, loading, unloading & stacking up to any lead.

OD28136/2023-2024:Interconnection work with new line(300/160/150mm) to existing line (160/140/110/90/75mm) including necessary earth work, conveyance of materials and labour etc ,but excluding cost of specials

OD28137/2023-2024:Supplying and fixing 150mm CI surface box and protection tube for valves including cost of surface box, protection tube, conveyance, labour charges etc. complete

Cost of Materials

OD28092/2023-2024:Supply of 150 mm GI pipe (Medium)

100.98.440:Supply of CI Air Valve, Conforming to IS 14848 - 2000, Single Orifice, Small Orifice Type S1, Size 25mm.

100.98.460:Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Cap PN 1.6, Size 150mm.

100.98.457:Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Cap PN 1.6, Size 80mm.

OD28094/2023-2024:Supply of 150 mm CID Joint(Class10)

OD28096/2023-2024:Supply of 160 mm PVC R/Joint

OD28097/2023-2024:Supply of 20 mm P/E ASTM (Sch.80) Pipe

OD28098/2023-2024:Supply of 20 mm GI pipe

OD28099/2023-2024:Supply of 20 mm GI Union

100.98.49:Supply of PVC Saddle Piece (Average rate of 200/160/140/110/90/75/ 63/ 50 mm).

OD28100/2023-2024:Supply of 20 mm GM Stop cock

OD28101/2023-2024:Supply of 25 mm GI Elbow

OD28102/2023-2024:Supply of 25 mm GI Hex Nipple

OD28103/2023-2024:Supply of 20 mm GI Elbow

OD28104/2023-2024:Supply of 20 mm ASTM MTA

OD28105/2023-2024:Supply of 20 mm Ferrule

OD28106/2023-2024:Supply of 20 mm GI Hex nipple

OD28107/2023-2024:Supply of 150/100/80 mm MS saddle (Heavy)

OD28109/2023-2024:Supply of 160x110/90/75 mm PVC Reducer

OD28110/2023-2024:Supply of 160 mm PVC TEE

OD62473/2023-2024:160 MM PVC END CAP

OD28111/2023-2024:Supply of 160 mm PVC MTA/FTA (Cl.3)

OD62485/2023-2024:160mmX90/45 degree Bend

OD28112/2023-2024:Supply of 150 mm x100/80 mm GI Reducer

OD28113/2023-2024:Supply of 150 mm GI TEE

OD28114/2023-2024:Supply of 150 mm GI Coupling

OD28115/2023-2024:Supply of 150 mm MS Flange set

OD28116/2023-2024:Supply of 150 mm x 90/45 degree GI Bend

OD28124/2023-2024:Supply of 80 mm CID Joint(Class10)

OD28125/2023-2024:Supply of 100 mm CID Joint (Class10)

OD28126/2023-2024:Supply of 125 mm CID Joint(Class10)

OD28127/2023-2024:Supply of 200 mm CID Joint(Class10)

OD28128/2023-2024:Supply of 75 mm PVC R/Joint

OD28129/2023-2024:Supply of 90 mm PVC R/Joint

OD28130/2023-2024:Supply of 110 mm PVC R/Joint

OD28131/2023-2024:Supply of 140 mm PVC R/Joint

Bidder Name

SANTHOSH JACK