SPECIAL REPAIR TO BATHROOMS OF BLDG NO P 154 AND P 155 AT MIL STN GANDHINAGAR

Amount

Supply only, liquid water proofing compound. complete complete all as specified and directed.

M&L for PCC 1:3:6 type C2 (using 40 mm graded granite stone aggregate) in surface channel and drains, etc.

M& L providing precast cement concrete (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in landing / cover slab etc setting in CM 1:6

Reinforced Cement Concrete 1:2:4 (using 20 mm graded granite stone aggregate) for slabs suspended on walls, beams and columns, in floors, roofs, landings and in shelves and the like.

M&L for Brick work with sub class 'B' bricks, straight or curved on plan exc. 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

Brick work with sub-class `B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4

M& L cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth

Rough finished flat form work to soffits of suspended slabs such as roof slabs, floor slabs and similar work not exce 200 mm thick.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide

Taking down cement plaster on brick or stone wall etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

M&L for rendering cement plaster 15 mm thick in double layer 1st coat shall be 10 mm thick in CM (1:6) and 2ndcoat shall be 5mm thick in CM (1:4) mixed with water proofing compound on brick work or concrete surfaces, complete all as specified and directed. Note: WPC shall be measured and paid separately)

M&L for rendering cement plaster 10mm thick in cement mortar (1:6) on brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering cement plaster 5mm thick in cement mortar 1:3 on fair faces of concrete in ceilings, chajjas, fins facia etc. finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of white cement as primer complete all as specified and directed.

M&L for preparation of old plastered surfaces of wall and applying one coats of cement base paint complete all as specified and directed.

M&L for preparation of old plastered surfaces of wall and applying one coats of white wash complete all as specified and directed.

M&L for preparing newly plastered surfaces of walls and applying three coats of white wash.

M&L for preparing new plastered or un-plastered ceiling surfaces and applying three coats of white wash complete all as specified and directed.

M&L for preparation of old plastered surfaces and applying one coats of white wash on ceiling complete all as specified and directed.

Taking up or down steel tubing and connections for 15mm bore of pipe complete all as specified and directed.

Taking up or down steel tubing and connections for 25mm bore of pipe complete all as specified and directed.

Taking up or down steel tubing and connections for 40 mm bore of pipe complete all as specified and directed

S&F, steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors for 15mm bore of pipe complete all as specified and directed.

S&F, steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors for 25mm bore of pipe complete all as specified and directed.

S&F steel water tubes, medium grade, galvanized with all fittings and fixed to walls and ceilings or laid in floors for 40 mm bore of pipe complete all as specified andd directed

Refixing old serviceable steel tubing and connections in new or old position (walls, ceilings, floors etc.) for 15mm bore of pipe complete all as specified and directed.

Refixing old serviceable steel tubing and connections in new or old position (walls, ceilings, floors etc.) for 25mm bore of pipe complete all as specified and directed.

Refixing old serviceable steel tubing and connections in new or old position (walls, ceilings, floors etc) for 40 mm bore of pipe complete all as specified and directed

S&F, 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls including stack clamp complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls including stack clamp complete all as specified and directed.

S&F, 75mm bore PVC (SWR) bend, any radius with access door complete all as specified and directed.

S&F, 110mm bore PVC (SWR) bend, any radius with access door complete all as specified and directed.

S&F, 75mm bore PVC (SWR) bend, any radius complete all as specified and directed.

S&F, 110mm bore PVC (SWR) bend, any radius complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and directed.

S&F, 110 mm bore PVC (SWR) junction single , (Single T) equal or unequal with access door complete all as specified and directed.

S&F, 75 mm bore PVC (SWR )junction single , (Single T) equal or unequal with access door complete all as specified and directed.

S& F 110 mm PVC (SWR) vent cowl

S& F 75 mm PVC (SWR) vent cowl

Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for.

Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and directed.

M&L, Non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular), area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set & jointed in net cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM 1:4 complete as specified and directed.

M&L for coloured glazed ceramic tiles of size 300 x 450 x 7mm thick on vertical surfaces such as skirting/dado, set and jointed in neat cement slurry and pointed in coloured cement to match over and including rendering 10mm thick in cement mortar (1:3) complete all as specified and directed.

M&L for 25 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) complete all as specified and as directed by Engineer - in - Charge

M & L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

Demoltion of stone slab and tile laid bedded and pointed in any mortar of any description or any thickness in floor/apron etc

M&L for water proofing of sunken portion consisting of under mention item i) Plastering in CM 1:3 ,15 mm thick with WPC at all around and base of sunken floor with proper slope.(ii) Applying a coat of bituminous primer @ 0.5 Kg /sqm and then pasting of polythene film ,150 micron , with cold back adhesive .(iii) Fixing 25 mm dia GI pipe (medium grade ) spout of length 45 cm (iv) Providing PCC 1:5:10 type E2 complete all as specified.(v) The process of (i) to (iv) Shall only be done after demoltion of existing old treatment complete

S&F, in repairs, vitreous china squatting pan, 'Orissa’ pattern, white of size 580mm x 440mm with integral foot rest, P or S trap (excluding flushing cistern and flush pipe) complete all as specified and directed.

S&F in repair two way bib taps with hand faucet with 1.2 mtr brass flexibile tube and wall hook mounted type chromiun plate for EWC.

S & F in repair PVC Low level flushing cistren 10 Ltr capacety including all itting such as flush pipe brackets(Complete).

S & F Vitreous Ware wash down water closet (Pedestal), white (ETWC) and fixed in repairs including seat cover with brass screws and excluding flush pipe and flushing cystren

S&F in repair 75 mm outer dia PVC (SWR) floor trap, plain with Grating including joining with solvent complete all as specified and directed.

S&F, in repair, vitreous china wash basin, white, flat back of size 550mm x 400mm including brackets grouted in cement mortar 1:2 in wall complete all as specified and directed. Note :- Supply only pillar taps, waste fittings, PVC connection, PVC waste pipe shall be measured and paid separately.

S&F in repair vitreous China counter wash basin, oval type, flat back, 560 x 470 mm size, snow white, inserted in granite slab chromium plated waste pipe of suitable length including taking down existing wash basin complete.

Soap dish in repair vitreous China white, approximate size 160x 160x90mm

S&F, in repair, only PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

Supply only 32mm, waste fittings, brass chromium plated for glazed ware sink, basins, etc. with long screw shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

Supply only PVC waste pipe 32mm bore of size 450mm to 600mm long complete all as specified and directed.

S&F, 40mm bore, high density polyethelene pipe (HDPE) of pressure rating 6kgf/sq.cm fixed to walls, ceilings or in floors etc. complete all as specified and directed.

S&F in repair pillar taps cast copper alloy with capstan head, chromium plated, screwed down high pressure, with or without lettered ‘hot’ or ‘cold’ with long screwed shanks and fly nuts, screwed for iron pipes 15mm bore complete all as specified and directed.

S&F, in repair, long body bib taps, cast copper alloy, fancy type, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule of 15mm bore complete all as specified and directed.

S&F, in repair angular stop cock, size 15mm bore.

S & F in repairs chromium plated with long shank and cup (concealed type) 15 mm bore Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as directed. (Make Jaquar only)

S&F, in repair, brass chromium plated shower rose with or without swivel joint, 125mm size complete all as specified and directed.

Taking down steel window/ventilator including grills of any description, n. exc 1.5 Sqm each complete all as specified and directed

S&F, Aluminium anodised windows/ ventilators with one or more rebates including joining cleat for fixing etc complete with frames, shutters and grills of size directed by Engineer-in-charge including handles, tower bolts, grills, etc complete all as specified and directed. Note:- sheet glass, wire cloth, lock, etc shall be measured and paid seperately.

S & F 3 mm thick fugured glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane

S&F Aluminium alloy wire cloth. 0.45 mm nominal dia of wire and average width of aperture 1.4 mm and fixed with aluminium wire staples

S&F in repair, vitreous china bowl urinal flat back, of size 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing flush pipe grating and union for discharge pipe. (exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sqm each complete all as specified and directed.

S&F, factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying and fixing in opening as per specifications complete all as specified and directed.

S&F aluminium anodised, barrel tower bolts of extruded section with length of bolt 150 mm and fixed complete all as specified and directed

Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each

S&F, 35 mm thick 2nd class hard wood plain framed panelled shutter (two panel) with lock rail and panel of 12 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS 1003 (Part -I), Klin seasoned and chemically treated and complete all as specified and directed.

M&L for preparation of new wooden surface of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy.

Preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint.

S&F, stainless steel butt hinges of size 100mm complete all as specified and directed.

S&F extruded aluminium alloy handles, fabricated type, anodised of size 150 mm complete all as specified and directed.

S & F Granite 18-20 mm thick (of any type) work (table rubbed and polished) in steps, platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade

Rounding to edges of stone slabs one edge, such as steps, cooking plateform, and other similar situations complete all as specified and directed.

S&F,in repair brass chromium plated, tubular towel rail 20mm dia, D type, 600mm long complete all as specified and directed.

S&F in repair PTMT towel Ring of fixed with and including Chromium plated brass screws and wooden/plastic cleats.

M&L for 25mm thick precast cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate as in louvers or jallies (measured solid), including all mouldings but excluding frame, set in cement mortar (1:4) complete all as specified and directed.

M&L providing cement concrete (1:2:4) type B1(using 20mm graded stone aggregate) as in cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exc. 15cm thickness (below or above ground level) all as specified and directed.

Dismantling of cast iron, PVC or reinforced concrete drain pipes jointed in cement mortar for 110mm and 75mm bore of pipe from wall/floors etc complete all as specified and directed.

Taking down carefully copper/aluminum point wiring (light, fan,socket or power) complete,including fixture and fitting such as as switches, ceiling roses, pendants, regulators, sockets,etc excluing light fittings etc,removing materials to store for keeping in safe custudy or for taking credit ( credit for above items should be made as per conditions separately) and making good disturbed surface of walls, ceiling, floor etc to match with the existing surface.

M&L for wiring with and including multi stranded copper conductor 1.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed, FRLS cable, 1100 volts grade, ISI marked with valid CML number, drawing through in and including medium grade, rigid non metallic, PVC concealed conduit of 20mm bore and including cutting chases for conduits and sunken boxes, its accessories & including with multi stranded copper conductor 1.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed, FRLS cable, green colour, 1100 volts grade, ISI marked with valid CML number as continuity earth wire terminating with provision sunken concealed terminal boxes complete all as specified and directed for the following :-

(a) One light/fan point controlled by one switch

(b) One multi purpose socket 5 Amps, Independent board.

M&L for wiring with and including multi stranded copper conductor 2.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed, FRLS cable, 1100 volts grade, ISI marked with valid CML number, drawing through in and including medium grade, rigid non metallic, PVC concealed conduit of 20mm bore and including cutting chases for conduits and sunken for boxes, its accessories & including with multi stranded copper conductor 2.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed, FRLS cable, green colour, 1100 volts grade, ISI marked with valid CML number as continuity earth wire terminating with provision of sunken concealed terminal boxes complete all as specified and directed for the following :-

S&F switch piano, flush button single pole, one way 5 Amps complete all as specified and directed

S&F socket outlet 2 in1, 3 pin, 5 Amps, flush type complete all as specified and directed

S&F socket outlet multipurpose, 3 pin, 5 &15 Amps flush type complete all as specified and directed

S&F switch piano flush button single pole, one way 15 Amps complete all as specified and directed

S&F Ceiling rose, PVC/poly carbonate,isolated body, three terminals.

S&F lamp holder, insulated body with back plate for batten fittings complete.

S &F fix in repair Distribution Board SPN 8 way, 240 volts, factory made powder coated, double door with neutral and earth link, suitable for fixing MCB,s complete including connecting.

S & F in repair MCB’s single pole, 6 to 32 Amps 240 volts with ‘C’ curve, fixed in sheet metal board complete including connecting.

S & F in repair MCB’s SPN, 32 Amps 240 volts with ‘C’ curve, fixed in sheet metal board complete including connecting.

S&F, in repairs, slim LED light fitting, batten type, with poly carbonate round shape diffuser grey end cape housed is in ideal replcement solution with eligently designed in caps, 20 watt complete set flexible three core copper conductor cable of suitable size and testing on completion all as specified and directed.

S&F, in repairs, slim LED light fitting, batten type, with poly carbonate round shape diffuser grey end cape housed is in ideal replcement solution with eligently designed in caps, 10 watt complete set flexible three core copper conductor cable of suitable size and testing on completion all as specified and directed.

S&F in repair LED lamp 9 watt 230 volts complete all as specified and directed.

M & L in replacement sub-main wiring with 2 single core 2.5 Sqmm PVC insulated, unsheathed, 1100Volts grade, copper multi stranded conductor drawn in and including PVC casing caping and assessories including drawing a run of PVC insulated, unsheathed, 650/1100Volts grade, copper conductor multi stranded 2.5 Sqmm size as continuous earth wire drawn through and connected to main switch/ DB and testing on completion. Note: (i). 2 run of main conductor and one run of earth conductor shall be measured as one length.

M&L, in repairs, earthing complete with galvanized steel earth plate electrode of 60 cm x 60 cm x 6mm thick buried directly in ground [earth pit not less than 2.25 metre deep below normal ground level] with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized earth wire of 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No. 3 of MES SSR Part I all as specified and testing on completion.

Priya Construction co.

DATTA SURYAKANT CHAUDHARI

DMA PROJECTS

VIJAY CONSTRUCTION CO

Ramdev and Sons

ALBA AC AND REF SERVICES

Shree Builders

Haritwal traders