Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| Sl No | Description | Qty | Unit | rajan k L2 | BABU M G L1 |
|---|---|---|---|---|---|
| 1.00SCHOOL MAINTENANCE | |||||
| 1.00 | 11.39:Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS: 15622, of approved make in colours White, Ivory, Grey, fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete. | 24.6 | sqm | 1,504.77 ₹37,017.34 | 1,433 ₹35,251.8 Lowest |
| 1.00 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 75.6 | kg | 196.4 ₹14,847.84 | 187 ₹14,137.2 Lowest |
| 1.00 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | 242.78 | kg | 203.98 ₹49,521.86 | 194 ₹47,098.93 Lowest |
| 1.00 | OD148259/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 54 | sqm | 653.95 ₹35,313.3 | 622 ₹33,588 Lowest |
| 1.00 | OD148278/2025-2026:Supplying and fixing 160 mm PVC gutter including Cost ,Conveyance ,Labour as per direction from departmental officers including end cap . | 41 | metre | 598.5 ₹24,538.5 | 570 ₹23,370 Lowest |
| 1.01 | 50.18.9.19.1:Providing and fixing PVC pipes including fixing the pipe with clamps/ clips/ at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 mm dia 6 Kgf/cm2 - External work- Exposed on wall | 11.6 | metre | 425 ₹4,930 | 404 ₹4,686.4 Lowest |
| 1.01 | 9.156.1:Providing and fixing Pre-laminated medium density fibre board exterior grade (Grade-I) IS:14587:1998 marked, to backing or studding with screws etc. complete (Frames, backing or studding to be paid separately).Pre-laminated with decorative lamination on both side exterior Grade -I MDF Board 12 mm thick confirming to IS:14587. | 24.96 | sqm | 1,213.17 ₹30,280.72 | 1,155 ₹28,828.8 Lowest |
| 1.01 | 21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):
For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) | 62.4 | kg | 613.95 ₹38,310.48 | 584 ₹36,441.6 Lowest |
| 1.01 | 50.6.2.2:Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete | 1.75 | cum | 8,099.21 ₹14,189.82 | 7,713 ₹13,513.18 Lowest |
Tender Value
₹2.5 L
EMD Value
₹6,346
Closing Date
29 Sept 2025, 2:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SOORAJ V S
Office of the Assistant Engineer, LIDEW Section, Edavetty Grama Panchayat
Annual Plan-Maintenance of Govt UP School Thondikkuzha -Proj No -168/26-General Civil Work
2025_LSGD_798276_1
02/2025/AE/LIDEW/EDVTY
Open Tender
Civil Works - Buildings
Item Rate
180 days
EDAVETTY GP
Please refer Tender documents.
7 documents required · 7 mandatory
₹560
Yes
₹6,346
Yes
18 Nov 2025
18 Sept 2025
3 Oct 2025
18 Sept 2025
29 Sept 2025
18 Sept 2025
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1322917.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .