SPECIAL REPAIR TO ANNEXE BLDG NO P 481 IN TECH AREA UNDER AGE BR I AT AF STN JODHPUR

Amount

S&F in repairs single piece WC with UF soft close seat cover, hinges, Dual flush cistern, fittings, fixing accessories and acessories set, size 370x695x795 mm, including SS Trap-300 mm complete all as specified and directed. Make- Jaquar cat part No KUS-WHT-35851S300UF/ Kohler cat part no K-1381T-S-0 or equivalent makes as specified in Appx 'B' as approved by GE.

S&F in repairs half stall type urinal white of size 480x300x700mm with automatic sensor flushing valve with necessary fittings complete all as specified and directed. (Make of urinal - Jaquar cat part No KUS-WHT-13255/ Kohler cat part No K-20713IN-ER-0/ CERA calcia EFS Ivory including integrated flushing cistern or equivalent makes as specified in Appx 'B' as approved by GE.) (Make or sensor - Jaquar cat part no SNR 51097/ Kohler cat part No DC-24199N-Co1-CP or equivalent in makes as specified in Appx 'B' as approved by GE.)

S&F in repairs table top wash hand basin of size 820x450x150 mm size with click clack waste coupling 32 mm size full thread with 80 mm height and Sensor operated pillar tap complete all as specified and directed. (Make of WHB - Jaquar cat part No KUS-WHT-35931N/ Kohler cat part No K-2660IN-1-7/ CERA cat part no CATMEGA S2020160 or equivalent makes as specified in Appx 'B' as approved by GE ) (Make of waste coupling - Jaquar cat part no ALD-727 or equivalent makes as specified in Appx 'B' as approved by GE.) (Make of pillar tap - Jaquar cat part SNR 51033/ Kohler cat part no K-18656IN-ND-CP/CERA cat part No F6010103 or equivalent makes as specified in Appx 'B' as approved by GE.)

S&F bottle trap 32 mm size with 250 mm and 90 mm long wall connection pipe & wall flange complete all as specified and directed. Make - Jaquar cat part no ALD-769L250x190/ Kohler cat part No K-7314IN-CP/ CERA cat pat No F8060401 or equivalent makes as specified in Appx 'B' as approved by GE.

S&F rectangular shaped urinal partition with 8 mm thick frosted glass of size 1950 x 600 mm with necesarry SS brackets complete all as specified and directed. Make - Jaquar Model No 1810UF/ Kohler cat part no K-705098IN-SHP or equivalent makes as specified in Appx 'B' as approved by GE.

S&F automatic flash, touch free infrared hand dryer with power motor and carbon brush motor complete all as specified and directed. (Make - Jaquar cat part no HDR-SSF-AK2807/ Kohler cat part No K-5486T-2-OP or equivalent makes as specified in Appx 'B' as approved by GE.)

S&F 0.8 L capacity automatic soap dispenser with necessary fixing arrangements complete all as specified and directed. (Make - Jaquar cat part No SDR-BLC-DJ0160AS/ Kohler cat part No K-5486T-2-OP or equivalent makes as specified in Appx 'B' as approved by GE.)

S&F wall hook with necesarry fittings and fixing arrangements complete all as specified and directed. Make - Jaquar cat part no AKP35761P/ Kohler cat part No K-25349IN-AF/ CERA cat part no F5003113 or equivalent makes as specified in Appx 'B' as approved by GE.)

S&F Grab bar 300 mm long with necessary fittings and fixing arrangements complete all as specified and directed. Make- Jaquar cat part no AKP35701PS/ Kohler cat part no K-10701D-CP/ CERa cat part no B2210105 or equivalent makes as specified in Appx 'B' as approved by GE.

Supply and fix in repairs towel ring square with round flange with necessary fittings and fixing arrangements complete all as specified and directed. Make - Jaquar cat part No ACN -1121 N/ Kohler cat part no K-5631 IN-CP/ CERa cat part no F5014115RG or equivalent makes as specified in Appx 'B' as approved by GE.

Supply and fix in repairs stainless steel single towel rail 600 mm long with necessary fittings and fixing arrangements complete all as specified and directed. Make - Jaquar cat part No ACN -1111 SM/ Kohler cat part No K-5630IN-CP/ CERA cat part no F5014103RG or equivalent makes as specified in Appx 'B' as approved by GE.

Supply and fix in repairs toilet paper roll holder with stainless steel flap with necessary fittings and fixing arrangements complete all as specified and directed. Make - Jaquar cat part No ACN -1153 S/ Kohler cat part No K-25070IN-CP/ CERa cat part no F5013109CH or equivalent makes as specified in Appx 'B' as approved by GE.

Supply and fix in repairs health faucet with 8 mm dia, 1.20 m long flexible tube and wall hook with necessary fittings and fixing arrangements complete all as specified and directed. Make - Jaquar cat part No ALD-573/ Kohler cat part No 98100IN-0/ CERA cat part No F8035101MB or equivalent makes as specified in Appx 'B' as approved by GE.

Supply and fix in repairs glass shelf 600 mm long with necessary fittings and fixing arrangements complete all as specified and directed. Make - Jaquar cat part no ACN-1171N/ Kohler cat part No K-5636IN-CP/ Cera cat part No F5001114 or equivalent makes as specified in Appx 'B' as approved by GE.

Supply and fix in repairs corner glass shelf assembly with necessary fittings and fixing arrangements complete all as specified and directed. Make - Jaquar cat part no ACN-1173/ Cera cat part no F5005103 or equivalent makes as specified in Appx 'B' as approved by GE.

Supply and fix in repairs two way bib cock with wall flange complete all as specified and directed. Make - Jaquar cat part no ARI-39041/ Kohler cat part No K-16094IN-4-CP/ Cera cat part No F1018163 or equivalent makes as specified in Appx 'B' as approved by GE.

Supply and fix in repairs angular stop valve with wall flange complete all as specified and directed. Make - Jaquar cat part no ARI-39053/ Kohler cat part No K-80158IN-9AV-CP/ CERA cat part No F1005201 or equivalent makes as specified in Appx 'B' as approved by GE.

Supply and fixing in repairs of PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 sqm but not exceeding 4 sqm each and removing from site complete all as specified and directed.

S&F powder coated aluminium sections (minimun thickness of powder coating 50 micron) as in work for doors, windows, ventilators and partition fixed type with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size including neccesary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, CP brass/ stainless steel screws complete all as per architectural drawings and the directions of Engineer-in-Charge.

S&F for sheet glass 5 mm thick, ordinary quality and glazing with oil putty or wooden beads supplied with shutters in square exc. 0.5 sqm in each pane complete all as specified and directed.

Supply and fixing 12 mm thick toughned glass as in partition, designer door etc including approved etching patterns/ transculent/ frosted or reflective solar control film if required with stainless steel cleats and rails on floor, walls and ceiling and sealing the gaps with approved silicon sealant with other suitable accessories to fix door on floor spring and top pivot complete all as specified & directed by the Engineer-in-Charge.

S&F stainless steel 450 mm long handle (minimum dia of SS rod 25 mm) suitable for glass doors complete all as specified and directed.

S&F powder coated american door handles 200 mm long suitable for aluminium doors complete all as specified and directed.

S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed.

S&F stainless steel top pivot 150 mm long suitable for aluminium/glass doors complete all as specified and directed.

M&L for venetian blinds, vertical type, 100 mm wide with polyster fabric of approved colour and pattern with aluminium fittings, and top rail and nylon buttons/loops etc fixed cuttings and alteration if necessary wherever AC/coolers exists including dismantling old unserviceable venetian blinds complete all as specified and as directed.

Dismantling of boarding any description fixed in any position with nails complete all as specified and directed.

M&L for GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre complete all as specified and directed.

M&L for 8 mm thick seamless calcium silicate ceiling made out of 1800 x 1200mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25mm long self drilling and tapping screws having phillips head with under head cutter at 200mm centre to centre, including finishing the joint of face board with specially formulated jointing compound and 48mm wide fibre tape to provide seamless finish complete all as specified and directed. ( Note :- Frame work for ceiling shall be measured and paid separately.)

Supply & installation, testing & commissioning of hi wall split units BEE 5 star rated indoor/outdoor (evaporator & condenser shall be of copper), inverter type copper tubing of required size and communication cable as per provided by OEM for proper installation and outdoor unit including wall/floor mounted stand complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality of capacity 1.5 TR 230 volt AC supply complete all as specified and directed.

S&F voltage stabilizer for automatic operation,single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy + 2.5 % and of capacity 3 KVA complete all as specified and directed.

S&F copper tube(ISI marked) of size ⅝” or 3/8'' dia for any capacity of split type AC complete all as specified & directed.

S&F copper tube(ISI marked) of size ¼” dia for any capacity of split type AC complete all as specified & directed.

M&L for fire resistance, elastomeric Nitrile rubber tubing (NBR) for Pipe insulation thickness 10mm of size ⅝" or 3/8'' dia of split type AC's any capacity complete all as specified & directed.

M&L for fire resistance, elastomeric Nitrile rubber tubing (NBR) for Pipe insulation thickness 10mm of size ¼” dia of split type AC's any capacity complete all as specified & directed.

S&F flexible drain pipe (PVC BRAIDED hose pipe) of size 15 mm dia, for split type AC any capacity and any make complete all as specified & directed.

S&F in repair decorative wall mounted light fiting with LED light 8 watt including fixtures for fitting the same on wall complete all as specified and directed. Make - Cat part No.-LWWL02X203XW of Jaguar or equivalent makes as specified in Appx 'B' as approved by GE.

S&F in repair LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 v AC decorative type with driver and LED lamp inculding connecting up with three core flexible copper conductor cable of suitable size complete all as specified & directed.

S&F in repair light opal glass with chrome finish wall lamp 4 watt including fixing arrangement complete all as specified and directed. Make - Cat part No.-KWB-CHR-MB12021161A of Jaguar or or equivalent makes as specified in Appx 'B' as approved by GE.

S&F sheet metal enclosure vertical MCB DB TPN 04 ways, IP 43, with 200 amps rated bus bar 415 Volts suitable for 125 Amps TPN MCCB 36 KA as incomer, double door with magnetic locking system complete all as specified & directed.

S&F in repairs MCB 5 to 32 Amps SP 10 KA,240V 'C' Series complete all as specified & directed.

S&F MCCB, 125 Amps, 3 pole,16 KA, 415 volt with fixed thermal maganetic release all as specified and directed.

Savitri Enterprises

DEV INDUSTRIES