BCKV/FMTTI/2019-20 / 18

Mild Steel Laboratory Cot Specification Dimensiom:3 feet x 7 feet supported on angle framed structure, finished in attaractive colour bunk bed heavly duty + mattress . Deuce Bunk Bed R.Ivh.Blue The bunk bed should be of length 215.7 x 84.3 x 165 (cm) .withmattresss dimensions of 206.4 x 97.2 (cm).

Laboratory Storage Locker Unit 4 Door with lock, with 1 Main Unit and 4 Add On Unit. PLU 4 Door Specification Unit 4 Door with lock, with 1 Main Unit and4 Add On Unit. PLU 4 DoorOverall size of 4 - Door PLU + Lkr (Base) shall be 380mm(W) x 450mm(D) x 1830mm(H). DMX Drg.- PL 13-A4-33797,R1 - 4 Sheets(Cam Lock) DMX Drg.- PL-13-A4-36467,R1-4 Sheets(Hasp.) Stackability shall have add - on units that can be stacked width wise to form bank of lockers having common side panel. Locking shall have 10 Lever cam lock with lock lever plus option of hasp arrangement . Material shall be CRCA 0.6 mm thickness . Construction shall be Rigid Knockdown construction , shelf shall be uniformly distributed load capacity per each shelf level is 35 Kg maximum . Finish shall be epoxy polyester powder coated to the thickness of 50 microns . Handle/Label holder shall be Aesthetically appealing Snap fit ABS plastic handle . Ventilation shall be attractive punched pattern for ventilation .

Laboratory Chair with Row Table Enlighten Specification A)Legs: - Legs are made of MS ERW tube section (157138) of size 75x25x2 mm thick oval tube with 5 mm thk HR brackets as per IS:2062 and 2mm thk CRCA brackets as per IS-513welded on to the tubes. Assembly is powder coated with epoxy polyester. - Leg height varies from 705 to 1005 in pitch of 50 as per layout. - Sturdy anchoring by anchor bolts on to base of 8mm thk plate for proper resting of Leg**. - Shoe made of ultramid -Nylon are provided at the bottom for covering the base plate. B)Side dads: - Two side clads made of e18 mm thk plate with 0.8mm thkpvc lipping and on the outside covered with welded metal structure made of 2 mm thk CRCA as per 1S-513 powder coated with Epoxy polyester . C)Worktop: - Worktop are made of 25 mm thick Pre-Laminated Board of El-P2 Grade and approved shade conforming to IS:12823:1990. All the edge of work surface are provided with machine pressed 2mm thick pvc edge band glued with hot melt glue. D)Seat: - Seat has self closing mechanism which will operate by means of dead weight . Seat understructure is made from combination of welded fabricated structure of 5mm Thk HR as per IS:2062 and 8mm thk ply as per 1S:303 with moulded PU foam of density 55 kg/cu.mtr. on top which in turn is covered with stitched upholstery made of leatherite as per INT/DSN/MSS/UPH1038 or foam back fabric as per TNT/DSN/MSS/UPH/013. Seat assembly is covered on bottom side by means of seat cover made of pp. E)Seat Back: - Seat back is made from combination of 8mm thk ply as per 15:303 with moulded foam on top which in turn is covered with stitched upholstery made leaterite as per INT/DSN/MSS/UPH/038 or foam back fabric as per INT/DSN/MSS/UPHJ013. F) Seat Support Frame : -Seat support frame is made from combination of MS ERW tube section (IS 7138) of size 80x40x2.5 mm thick rectangular tube and MS ERW tube section(IS 7138), of size 48x19.1x2 mm thick oval tube welded together . Assembly os powder coated with Epoxy polyester. CAP made of ultramidare provided from front to cover the oval tubes. G)Modesty: - Modesty is made of 25mm thick pre-laminated twin board of E1-P2 Grade and approved shade conforming to IS:12823:1990. All the edge of modesty are provided with machine pressed 2 mm Thick pvc edge band glue with hot melt glue.

120 (One hundred twenty) Seater

80 (Eighty) Seater

Dining Chair Unwind Specification The seat and back are made uo injection moulded high impact ompound polypropylene polymer compound with indoor ompo UV Resistance. The Powder coated (DFT50+ microns) weled tubular frame is made from 2.22 + 0.03 cm x 0.16+/- 0.0128cm and 3.5+/- 0.03 cmx1.5+/-0.03 cm x 0.16 +/- 0.0128 cm M.S.E.R.W tubThe Shoes are made of high impact ompound polypropylene polymer ompound with indoor grad UV Resistance and pressed fitted with tubularfram. SIZE : (W)52.5cm*(D)55.8cm*(H)84.5cm*(seat H) 45.0 cm Seat Size 52.5cm(W) x 53.2 cm(D) Back Size 51.6 cm(W) x 40.5 cm (H)

Dining Table-six seater Specification Length : 150cm Width : 90cm Height :75.7cm TABLE METERIALS & SIZE :TOP: 19mm MDF board with okumeveneer,Color : Brown Black,LEGS: 720 x 103 x 20 solid wood , Color : Brown Black.

First Impression 3 Arch Specification Top shall be of Rubberwood with clean Matt PU finish 18 mm thick , inside radius - 700 mm , outside radius - 1350 mm and depth - 650 mm . Cork shall be 18 mm thick of rubber . Glass shall be Frostered 10 mm thick diamond cut finishing on edges , inside radius shall be - 1202.5 mm , otside radius - 1402.5 mm and depth - 200 mm . The Modesty Panel shall be MS Perforated sheet below worksurface : 0.8 mm (thick) x 665 mm ( height) x 1345 mm (flat length ) . Above Worksurface : 0.8 mm (thick ) x 260 mm (height) x 1345 mm (flat length) . The legs shall be of MS tube 1.6 mm thick diameter 50.8 mm and height 604 mm . .

Nova Pedestal for Reception Table (646H x 390W x 440D ) Specification Overall Dimensions of Free Standing Ped With Castors For Finnesse Table shall be 390mm(W)x440mm(D)x646mm(H). The construction & Material used shall be welded assembled , 0.8 mm thick CRCA for body shell , drawer front & tray , front side stiffener ,rear aide stiffener and 1.2 mm thick CRCA Top stiffener & Bottom stoffener . The drawer fronts shall be metal front straight edge . Locking shall be 10 lever cam lock & Central RH locking with actuator & lock channel mechanism for box-box-file Pedestal . The top panel shall be metal straight edge top . Castor should be swiveling non - lockable castors mounted below the body shell for free standing full height mobile pedestal and M8 Leveling stud for free standing pedestal . The anti-tipping mechanism shall have fifth roller arrangement mounted below file drawer to avoid toppling of unit when file drawer is pulled out . Partition in drawer shall be 1 no. Partition in box drawers with lock mounted . Plastic pencil tray shall be optional accessory . Finish shall be epoxy polyester powder coated to the thickness of 50 microns . Application shall be suitable for pushing below work surface which has got a clear height of 725 mm from below . For drawer pulling side wise tapered recess provided in shell behind drawer fronts .

Reception Chair Specification SEAT ASSEMBLY: The seat should be made up of 1.4 ± 0.1 cm thick liot - prejsedOyvira(Sel, moulded polyurethane foam and upholstered with fabric. MORE INTERIO DESIGN SEAT SIZE: 50.0cm (W)x 49.0cm(D). - - 2. BACK ASSEMBLY: The two part assembly upholstered with Mesh fabric should be made up of back outer injection moulded in glass filled Polyamide and back inner injection moulded in glass filled Polypropylene. The back consist of adjustable Lumbar support made of injection mouldedPolyoxymethylene (POM) which should be upholstered with foam and fabric having an adjustment of 5.5 ±0.5 cm. BACK SIZE: 48.0 cm(W) x 54.5 cm(H). 3. POLYURETHANE FOAM: The polyurethane foam for seat should be of density = 55 ± 3 kg/m3. 4. FOUR-WAY ADJUSTABLE ARMRESTS: It should be made of glass filled Polyamide arm structure with PU armtop and height adjustment of 9.0 ±0.5cm.The armtop has swivel,side-to-side and to-fro movements. 5. MECHANISM: The mechanism should be designed with the following features: • 360° revolving type. • Auto-balance synchro - tilt • 4 position (including upright lock) giving option of variable tilt angle to the chair. 6. SEAT DEPTH ADJUSTMENT: Seat depth adjustment should be integrated in the seat through a sliding mechanism. Seat depth adjustment range should be of 4.5±0.5 cm. 7. PNEUMATIC HEIGHT ADJUSTMENT: The CLASS-4 pneumatic height adjustment has stroke of 9.5 ± 0.5cm. 8. PEDESTAL ASSEMBLY: The pedestal should be injection moulded in glasss filled Polyamide and fitted with 5 nos. twin wheel castors. The pedestal should be 67.0 ±0.5 cm P.C.D. 10.TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in Polyamide having 6.0± 0.1cm wheel Diameter

Storage Cabinet(Drawer type) Specification SERIES TOOL STORAGE CABINET . CODE: F DF 1090 52 04 .Dimensions (in mm): 717 L X 600 D X 1000 H . Number of Drawers: 6 . Each drawer Load Capacity: 70 KG . Height of Each Drawer: 150 mm . Overall Cabinet load capacity: 800 kg . COLOUR: BLUE RAL - 5012

Tool Cabinet(Door Type) Specification SERIES PERFOM CABINET . Dimensions (in mm): 1023 L X 555 D X 2000 H . Number of Shelves: 4 . Each Shelf Load Capacity: 100 KG . Overall Cabinet load capacity: 800 kg . COLOUR: BLUE RAL - 5012.

Sofa –Three seater Specification SERIES PERFOM CABINET . Dimensions (in mm): 1023 L X 555 D X 2000 H . Number of Shelves: 4 . Each Shelf Load Capacity: 100 KG . Overall Cabinet load capacity: 800 kg . COLOUR: BLUE RAL - 5012 .

Sofa Single Seater Specification Overall Size : Width : 111cm Depth : 93.5cm Height : 89cm Seating Height : 47.5cm. stitching: thread- polyester. pitch- 5 stitch per inch( pitch of thread i.e. stitch per inch). leather/pvc/fabric: (pu/pvc/cotton/ polyester/ composite)- fabric：d3/d5/d6 leather look fabric 100%polyester. thickness (mm) :0.9mm. weight (gsm) : 250g/m2. tensile strength {wrap/weft} (kg/cm) :nil. bursting strength (kg/cm2) :nil. colour fastness to rubbing {dry /wet} (scale 1-5) :grade4. frame material (tropical wood / pine wood/ rubber wood): solid plywood frame. moisture content ( 10 – 12 %) :less than12%. thickness of plywood used(mm) :9mm/12mm/18mm/30mm. standard of plywood used: {required standard : is 303 commercial plywood}. seat foam: (density, type)- thickness (mm) :100mm. density (kg/m3):30. type of foam (virgin/composite/moulded/ slabstock) :seat foam:5cm pure foam 3030(30density)+5cm rebond foam. covering :decron sheet spec.150g 70g. back foam: (density, type)- solid decron 7d/64mm. belt/ webbing material:nylon webbing- width of belt (mm) :back:45mm/seat:50mm..

Lab Stool-Revolving type Specification seat assembly: li should be circular type 0 30.0±0.5cm and made up of 0.1±0.012cm thkcr steel. it should be welded to the understructure and black powder coated ( dft 40-60 microns )understructure assembly: the understructure should be made of ms tube 0 2.2±0.03cm x 0.16±0.0128cm thkmserw tube. it should be welded to the ms fabricated circular seat assembly and black powder coated ( dft 40-60 microns ). the understructure should be provided with black pp injection moulded ferrules.

Lab Table with Granite)Top Specification Providing & fixing L 2400 x D 600 mm clear granite counter, including 18mm thick posished granite front facia, cutting and creating hole in slab and stone with counter alternative storage below and above granite top made with CRCA steel with epoxy power coated finish with 50 microns +/- 10) .

3 Seater Chair on Beam Specification The seat and back are made up with injection moulde high impact strength polymar compound with indoor grade UV resistance. Seat size 52.5 cm x 53.2 cm. Back size 51.6 cm x 40.5 cm. Poder coated welded tublar frame fitted on obe Beam supported by two pedestal

GLORY FURNISHERS PVT LTD

Godrej and Boyce Mfg. Co. Ltd.