GENERAL Supply Fabrication and irrection of Gas crematorium at Punnapra South Gramapanchayath Supply Fabrication and irrection of Gas crematorium at Punnapra South Gramapanchayath General Mechanical Work

Amount

supply of MS plate, Tees,, Angles etc for secondary chamber of size 1.25 m dia , height 1.25 m and plate thickness 5 mm .

OD14404/2023-2024:Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

OD20353/2023-2024:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

Front opening door of primary chamber , vertical sliding , counter weight balanced with view port of size 1 m dia 6 mm thickness inside insulation, view port ,sheet thickness 6mm

OD20355/2023-2024:Supply of MS plate IS 2062 B including cost of conveyance charges.

furnace bed (SS 304 grade ) and structure of size 2 meter length, 25 mm dia .

OD11700/2023-2024:Supply, fabrication and erection of furnace bed of size 2 m length 25 mm dia. SS 304 grade round rod including cost of labour, machinery , all lead and lifts, incidental and handling charges, etc. complete.

Thermal insulation for primary ,secondry and hot duct line etc with IS8 refractory bricks internal lining with min thick 230mm with high quality castable fire clay and mortars ,external Rock wool and as per TS6701 and ASTMC 680 including masonry

OD11664/2023-2024:Supply and buit up Thermal insulation for primary ,secondary, Carbon absorption system, chimney and hot duct line etc of size 229 mm x 114mm x76mm IS 8 refractory bricks to withstand 1500 degree celcius with high quality castable fire clay and mortars with specific type of curing to furnace, Outer skin temperature of the furnace wall to be maintained below 50 degree celcious, Rock wool and as per TS 6701 and ASTMC-680 including masonry work etc compete.

Supply and installation of self ignition SS burner system( high temperature withstanding) with ISI mark, burners are fully automatic with fan motor, pump, ignition transformer and electrodes, flame sensor,sequence controller, gas solenoid valve etc.

OD11709/2023-2024:Supply and installation of self ignition SS burner system( high temperature withstanding) with ISI mark, burners are fully automatic with fan motor, pump , ignition transformer and electrodes, flame sensor, sequence controller , gas solenoid valve, having 50-250 kw/hr or 43000-215000 kcal/hr capacity, 4 -19 kg/hr gas flow(L.P.G) & 5-25 m^3/hr(N.G), 200W, 2800 rpm, 50Hz combustion air blower, 230V single phase electric supply with flame dimension( length(mm) : 320 – 110, diameter(mm) : 140-230 )and Back pressure upto 5M bar depending on operating load, 4 Nos. for primary chamber and 2 Nos. for secondary chamber. High pressure full length burners on either side of primary and secondary chambers. Fully automatic burners with fan, motor, pump, ignition transformer and electrode, flame sensor, sequence controller, gas solenoid valve air/ gas pressure switches. Step less fully modulating operation, allows air gas fine tuning. Ability to obtain optimum combustion values by regulating combustion air and gas. Integrated with PLC control for burner trip alarm/ hooter and other specified safety features etc complete.

Dilution system with ID fan(ISI Mark), centrifugal type, 5HP 3Phase motor with belt drive,1650 CFM volume of air, 10’’ W/G pressure, dynamically balanced SS 304 impeller, 2 Nos. 0.5 Hp motor and blower with ISI mark for fresh air intake.

OD11447/2023-2024:Supply and fixing of Dilution system with ID fan ( ISI Mark), centrifugal type, 5 HP 3 Phase motor with belt drive,1650 CFM volume of air, 10’’ W/G pressure, dynamically balanced SS 304 impeller, as per the direction of deptl officers at site.

OD11448/2023-2024:Supply and fixing of 0.5 Hp motor with blower for fresh Air intake (primary chamber) with ISI mark as per the direction of deptl officers at site.

Cyclone separator with mist eliminator , Venturi Scrubber of size 300 mm dia, 3 mm thickness, 2000 mm height SS 304 grade.

OD11517/2023-2024:Supply and fixing of Cyclone separator with mist eliminator, Venturi Scrubber of size 300 mm dia, 3 mm thickness, 2000 mm height SS 304 grade including cost of machinery , all lead and lifts, incidental and handling charges, etc. complete.

Supply of MS Plate for Chimney (IS 2062 B grade plate)

OD11990/2023-2024:Supply of MS plate IS 2062 B grade for chimney of size length 30 m, bottom diameter 1 meter and top diameter is 325 mm .including cost of conveyance charges

Supply and fabrication of 6'' dia MS pipe of thickness 7 mm for chimney connection

OD11586/2023-2024:Supply and fabrication and erection of 300mm dia MS pipe of thickness 5 mm for chimney connection including cost of labour, machinery , all lead and lifts, incidental and handling charges, etc. complete.

Foundation for Chimney of in the ratio of 1:1.5:3 (1 cement, 1.5 part fine sand and 3 part 20 mm aggregate stone) of size 1.5x1.5x2.5 m.

OD11852/2023-2024:Foundation for Chimney in the ratio of 1:1.5:3 (1 cement, 1.5 part fine sand and 3 part 20 mm aggregate stone)

Supply and installation of Lightening arrester including all accessories.

OD11576/2023-2024:Supply & installation of lightening arrester including all accessories

provision for Earth pit for waste water collection.

OD11677/2023-2024:Providing Earth pit to collect the waste water from the water tank including cost of labour, machinery , all lead and lifts, incidental and handling charges, etc. complete.

Supply of MS plate, MS Tees, Angles etc for Primary Chamber of size 3.2x 2.1x 1.5 M (Interior dimension) made with MS plate of thickness 5mm

OD11207/2023-2024:Supply of 5 mm MS plates for primary chamber confirming to IS 2062GrB including cost of conveyance charges

OD11218/2023-2024:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

Supply of Temp. controler and indicator, temp. sensor, k-type thermocuples panel board ,safety controler.solid state digital type temperature indicator controller 0 to 1200c in each chamber. The sensors must be inserted at the top of the chambers.

OD11519/2023-2024: Supply and fixing of Temperature controller , panel board and safety controller including cost of machinery , all lead and lifts, incidental and handling charges, etc. complete.

Supply ,Fabrication and erection of Stretcher type Trolley Fully SS with Ss bed and provisionj for easy sliding of the body in to the primary chamber with min, size of 11 ft X 3 ft X 2ft

OD11864/2023-2024:Supply ,Fabrication and erection of Stretcher type Trolley Fully SS with Ss bed and provision for easy sliding of the body in to the primary chamber with min, size of 11 ft X 3 ft X 2ft, including cost of labour, machinery , all lead and lifts, incidental and handling charges, etc. complete.

Fabrication and erection of Activated carbon adsorption unit of inside dimension is 900mm dia, & 1000mm height. inside lining and purifier ( used to limit odorous emissions)

OD11590/2023-2024:Fabrication and erection of Activated carbon adsorption unit of inside dimension is 900mm dia, & 1000mm height. inside lining and purifier ( used to limit odorous emissions) including cost of labour, machinery , all lead and lifts, incidental and handling charges, etc. complete.

OD15715/2023-2024:Supply of good quality charcoal for activated carbon absorption system to used to limit odorus emissions.

Supply and installation of Pressure gauge, Copper pipes, gas tubes, valves, LPG regulator, LPG Cylinder 12 Nos., safety controller valves, ball valves, MS pipes etc are complete

OD11860/2023-2024:Supply and installation of Pressure gauge, Copper pipes, gas tubes, valves, LPG regulator, LPG Cylinder 12 Nos., safety controller valves, ball valves, MS pipes etc are complete as per direction of deptl officer at site.

Fabrication and erection of primary chamber

OD11983/2023-2024:Fabrication and erection of primary chamber of gas crematorium. of size 3.2mx1.5mx2.1m including cost of labour, machinery , all lead and lifts, incidental and handling charges, etc. complete.

Fabrication and erection of secondary chamber of size 1.2 m dia. 1.2m height

OD11985/2023-2024:Fabrication and erection of secondary chamber of size 1.25 m dia. 1.25m height, including cost of labour, machinery , all lead and lifts, incidental and handling charges, etc. complete.

Fabrication, erection of chimney 30 m height, 1 m bottom dia., 0.325m dia top from bottom upto 18m height MS sheet with 8 mm thickness. from 18 m to 30 m MS sheet thickness 6mm.

OD12330/2023-2024:Fabrication, erection of chimney 30 m height, 1 m bottom dia., 0.325m dia top from bottom upto 18m height MS sheet with 8 mm thickness. from 18 m to 30 m MS sheet thickness 6mm including cost of labour, machinery , all lead and lifts, incidental and handling charges, etc. complete.

Supply of 3mm MS plate IS 2062 B grade for hot duct line

OD12388/2023-2024:Supply of 3 mm MS plate IS 2062 B grade for hot duct line of size 400x400x3mm including cost of conveyance charges.

Fabrication of hot duct line

OD12395/2023-2024:Fabrication of hot duct line of size 400mm x 400 mm, plate thickness 3mm., including cost of labour, machinery , all lead and lifts, incidental and handling charges, etc. complete.

Supply, Fabrication and Erection in correct position and alignment by welding SS water storage tank in 304L Grade as per approved specifications, drawings and directions of deptl officer at site including cost of all materials, labour,

OD12396/2023-2024:Supply, Fabrication and Erection in correct position and alignment by welding SS water storage tank in 304L Grade as per approved specifications, drawings and directions of deptl officer at site including cost of all materials, labour, machinery , all lead and lifts, incidental and handling charges, etc. complete.

Supply and fixing of MS flange in various size. for chimney joints

OD12593/2023-2024:Supply and fixing of MS flange in various size for chimney joints including cost of machinery , all lead and lifts, incidental and handling charges, etc. complete.

Painting all exposed surface with one coat zinc rich primer and one or more coat epoxy paint

85.115:Cost of painting with 2 coats of enamel paint over 1 coat of zinchromate primer as per IS1477:1994 after hand and power tool cleaning including cost of all materials, labour charges, cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

OD16099/2023-2024:Providing temporary platform for demolishing existing civil structure, concreting and plastering including cost of all materials, labours etc. complete

Foundation bolt and various size nut bolt with washer

OD12578/2023-2024:Supply of Foundation bolt and various size nut bolt with washer ( Foundation bolt size 25mm dia, 1200 mm length - 20 Nos.) including conveyance charges

Front door operating gear mechanism

OD12466/2023-2024:Front door operating gear mechanism for safe opening/ closing operation.

Supply of MS plate IS 2062 B grade of 3 mm thick for carbon absorption unit.

OD14389/2023-2024: Supply of MS plate IS 2062 B grade of 3 mm thick for carbon absorption unit including cost of conveyance charges.

OD14393/2023-2024:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

Supply of 12 mm MS plate for stifiner for chimney of size 300x300mm.

OD16109/2023-2024: Supply of MS plate IS 2062 B grade of 8 mm thick for chimney stiffener of size 300x300x8mm including cost of conveyance charges

Fabrication & erection of stiffiner of 8 mm thick MS plate for chimney.

OD16117/2023-2024:Fabrication & erection of stiffener of 8 mm thick MS plate for chimney. including cost of labour, machinery , all lead and lifts, incidental and handling charges, etc. complete.

KERALA STATE INDUSTRIAL ENTERPRISES LTD

KEERAL SAFE INDUSTRIAL EQUIPMENT PVT LTD

Bidder Name

KERALA STATE INDUSTRIAL ENTERPRISES LTD

Hi Teck Crematorium Pvt Ltd

KEERAL SAFE INDUSTRIAL EQUIPMENT PVT LTD