Selection of Bidder(s) for Supply, Installation, Testing and Commissioning of Development of Heritage Pathway with Decorative pole system with related comprehensive Civil, Electrical, Mechanical Work including all necessary equipment’s at near Khakrechi Darvaza with 3 (Three) years of Comprehensive maintenance, Morbi, Gujarat.

the Volume-I (Technical Bid only) of Morbi Municipal Corporation,

Tender in HARD COPY Dr. Ambedkar Bhavan, Gandhi Chowk,

4 Date, Time & Place of OPENING of the 10/07/2026 at 12:00 Hrs.

Volume-I (TECHNICAL BID ONLY) of Online Opening in the Office of:

Tender Morbi Municipal Corporation,

Dr. Ambedkar Bhavan, Gandhi Chowk,

Place for HARD COPY Opening of Tender:

Morbi Municipal Corporation,

Dr. Ambedkar Bhavan, Gandhi Chowk,

Municipal Commissioner

Morbi Municipal Corporation

Dr. Ambedkar Bhavan, Morbi -

This section relates to specifications for supply (wherever called for), installation, connection,

testing and commissioning of Heritage Pathway and Decorative Pole installation of the project.

The job comprises of the following:

1.1 Liaison work

1.2 Supply and Laying of L.T XLPE Cables with cable end termination.

1.3 SITC of Heritage Pathway and Decorative pole cable junction box and other accessories as

described in the scope of work of VOL-1 and BOQ.

1.4 Wiring of the fixture.

1.5 Earthling system installation.

1.6 Supply, Installation, Testing, and Commissioning (SITC) of Light Fixtures (Luminaires), including

associated wiring and Civil all related works as detailed in Volume-1 Scope of Work and Bill of

Quantities (BOQ).

Signature of Tenderer : City Engineer (MMC)

Name : Morbi Municipal Corporation

Company’s seal :

Name of Work : Supply, Installation, Testing and Commissioning of Development of Heritage Pathway

with Decorative pole system with related comprehensive Civil, Electrical, Mechanical Work including all

necessary equipment’s at near Khakrechi Darvaza with 3 (Three) years of Comprehensive maintenance,

Morbi, Gujarat.

Sr.No. Description Qty. Unit Rate Total

3.5M HEIGHT DECORATIVE SINGLE ARM POLE

SITC of 3.5M height Pole Made of mild steel pipe sections

89mm dia. & Top decorative bracket made of steel pipe

sections 60mm dia.(vertical) & gradually bent 33mm dia.

steel pipe sections. Decorative flower & curved designs are

made of steel. Arch. Base design with overall dimension of

260mm dia. & 200m height made of cast iron with weight

around 10kgs. Ring- 1(89mm/60mm, weight- 2.5kgs.) made

of cast iron. Entire pole & Bracket including all the cast iron

elements shall be made to provide pleasing aesthetics as

approved by Concerned Engineer in-charge. The pole should

be provided with an inbuilt junction box to fix 1no. of 32A

connectors and 1no. of 6A MCB, at the bottom - the inbuilt

box should have a flush door of suitable size. The decorative

pedastal to be provided with a suitable size base plate. This

base plate along with foundation bolts of suitable size to be

used for ensuring firm grouting into the specially designed

RCC foundation. wind pressure calculation as per IS

875(part-3) & structural calculation report as per EN40

should be submitted to verify the pole design. Pole & Cast

iron parts are painted in 3 layer coating(coating thickness-

100 microns minimum) in which 1st layer with etch primer,

2nd layer with epoxy primer & 3rd final layer with PU paint

- customised colour Metallaic NERI Grey.

Decorative Light Fixture, Light 851, Wattage 25-35W

Power Module LED, 3000k, Suspended

Light 851: it's upper square frame in single piece made of

die cast aluminum using pressure die-casting process,with a

decorative element with threaded tube male G 3/4" which is

also made of die cast aluminum using pressure die-casting

process, fixed on the top. Auxiliary and optical compartment

can be accessed by tilting the top frame. Lower frame with

hinge arrangement & four armed bracket made of die cast

aluminium in single piece using pressure die casting

process. a small decorative element made of cast aluminium

is provided at the bottom. Frosted Basket Screen made of

acrylic (PMMA) injection molded in single piece. Pure

polyester powder coating in Customized Metallic Grey

Colour. Silicone gasket between the upper and lower frames

ensures IP Rating - IP

Height – 650mm, Length - 325mm,Width-325mm,Weight -

LED source of high efficacy should be used . Colour

Rendering Index: Ra > 70. Electronic Power Supply for

LED Module, which offers Protection against Short Circuit,

Over- Voltage & Over- Current, with in-built surge

protection. LED Lifetime

>50,000hours. LM80 report from LED Manufacturer should

be submitted. Sample should be submitted for approval from

concerned engineer-in charge.

SITC of Exterior Up ligther 6W with high efficiency long

life COB LED mounted on MCPCB of fixture. Lumen

efficacy of LED >140 lm/W. IP 65 and IK05 Grey Pure

polyester power coated, Pressure die-cast aluminium

2 housing for efficient thermal management, sturdiness & 264 NOS 2,083

excellent corrosion resistance.High quality toughened glass

in clear finish for uniform light distribution.• Operating

temperature: -10 °C to +45 °C• Operating voltage range:

140 V - 270 V• Average life L70B50: 35000 hours

3 SITC of 5 to 8 ft Palm Tree. 132 NOS 595

SITC of high-quality Interlocking Concrete Paver Blocks of

Supstone 80mm thickness in red colorhe paver blocks shall

be of approved make, specifically SupStone or an equivalent

brand, conforming to IS:15658-2006 standards. The pavers

must be manufactured using high-strength cement concrete

with appropriate aggregates and UV-resistant pigments to

ensure long-lasting color and durability.The paver blocks

should be of M40 grade, having a minimum compressive

strength of 40 N/mm², with a maximum water absorption

not exceeding 6%. Dimensional tolerances shall be within

±3 mm for thickness and ±2 mm for length and width. The

HSN code for the item is

SITC of Vaccum Wetpress Kerb - 600 x 300 x 100 Grey

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured

cable multistrand Aluminium conductor for 1.1 KV. to be

6 laid on wall with necessary clamps or in existing trench / 200 Mtrs. 209

pipe of following size of cables (C) 3 1/2 Core 25 Sq. mm

(16 sq. mm 1/2 Core)

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured

cable multistrand / Solid Aluminium conductor for 1.1 KV.

7 to be laid on wall with necessary clamps or in existing 975 Mtrs. 143

trench / pipe of following size of cables (B) 4 core 6 Sq.

Providing and, fixing heavy duty flange type brass double

compression type cable gland with rubber ring for PVC

8 insulated armoured cable complete with out going tails, 8 Nos 76

insulating tape etc for following size of cables.(A) 3 & 1/2 /

4 core 25 Sq. mm

Solder less crimping type Aluminium lugs conforming to IS

suitable for cable of following size evenly crimped with

9 high pressure tool & connected to switchgear terminals with 8 Nos 17

brass/cadmium plated nut bolts in an approved manner. (C)

Solder less crimping type Aluminium lugs conforming to IS

suitable for cable of following size evenly crimped with

10 high pressure tool & connected to switchgear terminals with 370 Nos 6

brass/cadmium plated nut bolts in an approved manner. (A)

Supplying and erecting triple pole & neutral 440V / 500V

panel mounting Copper Busbars with four equal Nos. of

electrolyte bus having current density not more than

Amp. / sq.mm (Rated current / cross section area) duly

11 wrapped with colour insulating tape for phase sequence of 3 Rn.Mtrs. 2,290

following current carrying capacity, erected with necessary

bus bar supports /insulators, main cable socket to each bar,

erected in existing cubical panel with necessary

Providing and erecting Approved make Four pole moulded

case circuit breaker having breaking capacity ICU of 25 KA.

at 415 V,having normal current rating up to 25 A to 100A.

12 with Fixed thermal & magnetic release suitable to work on 1 Nos 7,210

A.C. supply 50 c/s. with all internal connections, spreader

tinned copper & complete erected in existing 16 G.M.S.

Providing & erecting 415 V MCB Four Pole for Motor &

Inductive Load (C Curve) having 10KA breaking capacity

& confirms to IS :8828 in existing box having following

capacity , ( C) 40 Amp. Cat III

Providing and erecting AC-3 duty 4 pole A.C. Coil with

NO & 2 NC aux contacts complete with 415V/220V

operating coil suitable for (L&T, BCH,T.C., Siemens, C&S

make).(B) For 40 A Rating

Providing and erecting Approved make RCCBs conforming

to IS: 12640 and having sensitivity of 30 mA and Short

Circuit withstand capacity of 10 KA and suitable for

operation on 3 phase and neutral 415V,50Hz. having

characteristic of quick action & tripping with all advance

feature & do not incorporate any electronic component for

following Max. rating erected as directed. (ii) 40Amps. FP.

providing and erecting Miniature circuit breaker single pole

6A to 25A suitable to operate on 240 V A.C. system and

having breaking capacity 10 KA to be erected in existing

box. confirming to IS 8828/1996 with ISI Mark, Cat III

Supplying & erecting earth pit of minimum bore dia.150mm

size approved make Earthing Electrode consisting Pipe-in-

Pipe Technology as per IS 3043-1987 made of corrosion

free hot dipped G.I.Pipes having Outer pipe dia of 50mm

having 80-200 Micron galvanising, Inner pipe dia of 25 mm

having 200-250 Micron galvanising, connection terminal dia

of 12mm with constant ohmic value surrounded by highly

conductive compound with high charge dissipation suitable

for following type of applications with chamber and heavy

duty cover. (A)(approved make OEM has to submit test

certificate including value of earth resistance of installation

17 duly stamped and signed by agency and officer Incharge has 5 Ea. 5,363

to ensure the value of earthing resistane mentioned in test

Certificate) & having back filling compound of (B) Inner

chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter

testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no

load & dry form, Sulphar content:- <2%(C) Back fill

Compound :- Earthing compound should be capable to

retain moisture for long time Necessary test report must be

submitted by Agency. (a) For Electrical Installation up to

440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

Providing and erecting Pipe type earthing having

cms.long and 2.5 cms. dia. galvanised iron pipe with

coupling and buch buried in specially prepared earth pit

complete with necessary 8 SWG earth wire.

Providing , erecting , fabricating the M.S. structure as per

requirement on site incorporating proper size of M.S. angles,

flats, bars, channels, sections complete with cutting,

19 welding, grinding & finishing duly painted with one coat of 65 Kg. 90

red oxide with erection on site as per direction of engineer

in charge with necessary grouting, cementing, plastering &

finishing complete.

Providing & laying approved make Double walled

corrugated pipes (DWC) of polyethylene(conforming to IS

14930 II )with necessary connecting accessories of same

material at required depth for laying of cable. below

ground / road surface for enclosing cable (A)50 mm outer

Making trench in Hard Murrum / Tar Road of suitable width

of 90 cms or required depth for laying any size of cable or

locating the fault all over the run and back filling the same

and making the surface as normal ground.

Supplying & erecting approved make Digital time switch

having lithium cell 6 years operative and operate battery

22 backup 1 channel day clock with 14 memory programme, 1 Nos 3,700

suitable to operate on 240V + 5%, 16A with, floating

contacts Minimum switching setup time 1 minimum & LCD

display. Also comprised permanent ON/OFF switching.

Programming switches & housed in fire proof thermoplastic

enclosure & transparent cover erected as required with

necessary connection erected as directed.

Supplying and erecting approved make suitable panel

23 indicator LED type lamp, lens cover, complete erected with 5 Ea. 50

necessary connections.

Providing & erecting L.T. Current Transformer with bar

primary 50/5 to 1000/5 ratio 15 VA burden erected in

existing CRCA box duly secured with insulating materials

connected to the meter

Supplying and erecting Ammeter / Voltmeter selector

25 switch for 3 phase AC Supply 500 V on existing panel board 3 Ea. 370

with necessary connections.

Supplying and erecting approved make Analog type moving

iron C.T operated Ammeter A C Current suitable slide in

scale 0- 400 Amp. with 3 Nos. of Current Transformer

erected on panel board with connections.

Supplying and erecting approved make Analog type

voltmeter moving iron with square/ Round Dial,

27 flush/pedestal mounting pattern for A.C.Voltage 0 to 500 1 Ea. 420

Volt range, erected on panel board with all connection,

providing and erecting Mains with ISI marked, 1.5KV grade

electrolyte multi stranded, annealed copper conductor with

heat resistant PVC insulated conforms to IS 694, IEC -

28 erected in existing pipe of following size (Specifically for 5 Mtrs. 157

control panel, relays, power switchgears, motor starters &

control wiring) with required size of copper lugs, nuts and

bolts if required. (G) One wire 16.00 Sq. mm

providing and erecting Mains with ISI marked, 1.5KV grade

electrolyte multi stranded, annealed copper conductor with

heat resistant PVC insulated conforms to IS 694, IEC -

29 erected in existing pipe of following size (Specifically for 30 Mtrs. 40

control panel, relays, power switchgears, motor starters &

control wiring) with required size of copper lugs, nuts and

bolts if required. (D) One wire 4.00 Sq. mm

providing and erecting Mains with ISI marked, 1.5KV grade

electrolyte multi stranded, annealed copper conductor with

heat resistant PVC insulated conforms to IS 694, IEC -

30 erected in existing pipe of following size (Specifically for 10 Mtrs. 29

control panel, relays, power switchgears, motor starters &

control wiring) with required size of copper lugs, nuts and

bolts if required. (C) One wire 2.50 Sq. mm

providing and erecting Mains with ISI marked, 1.5KV grade

31 electrolyte multi stranded, annealed copper conductor with 20 Mtrs. 12

heat resistant PVC insulated conforms to IS 694, IEC -

erected in existing pipe of following size (Specifically for

control panel, relays, power switchgears, motor starters &

control wiring) with required size of copper lugs, nuts and

bolts if required. (A) One wire 1.00 Sq. mm

Supplying and erecting Flexible PVC insulated multi strand

multi core 1.1 kv grade ISI marked copper wires of

following size to be erected as directed.(e) 1.50 Sq.mm

core round PVC sheathed

Providing & erecting weather proof, dust & vermin proof,

floor mounted front operated outdoor type double door

cubical panel board necessary IP-54 and above protection

as per approval from engineer incharge made from 14 SWG

thick CRC M.S. sheet for outer body & doors, 16 SWG

thick CRC M.S.sheet for internal partitions with necessary

accesories , supporting angles/ flats channel including

cutting, bending, drilling, welding, riveting with internal

partitions & cable alley as per requirements & instruction of

engineer-in-charge with erection of supplied switch gears,

BUSBARS, suitable size of inter connecting PVC copper

wire / copper-aluminium strips, rubber grommets, rib,

bakelite control fuses/MCB for measuring instruments,

earth bus & earth bolts, foundation flange - bolts-base

Plates, sufficient nos. of hinged doors, handles with locking

arrangement and rubber gasket,heavy duty end terminal

connection,danger notice board,necessary

ventilation,earthing strip complete. The Panel shall be

painted with epoxy powder coating. (The rates excludes the

cost of switchgears, bus bars, inter connecting mains &

Copper Aluminium strips, meters, Fuses etc. The dimension

shall be measured excluding base beams) The panel shall be

supplied with following approved manufacturers with

following size.(B) The standard companies switch gear shall

be used and only manufacturers at CPRI approved factory

(i) with 350 mm depth

Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured

34 copper cable 1.1 KV grade to be erected as directed of 1200 Mtrs. 158

following size. (E) 3 core 2.5 Sq. mm

35 M158 Coarse sand 20 Cu. Mtr. 279

Providing and fixing pre-cast concrete kerb stone of gray

cement based concrete block 30cm length,30cm height and

15cm thick of M250 grade concret as per approved design

and including excavation for fixing in proper line and

level,filling the joint with C:M 1:3 (1cement:3fine sand) etc

Excavation for foundation upto 1.5 m depth including

37 sorting out and stacking of useful materials and disposing 4 Cu. Mtr. 148

off the excavated stuff upto 50 Meter lead.(B)

Dense or Hard soil

Providing and laying cement concrete 1:3:6 (1-Cement : 3-

coarse sand : 6- hand broken stone aggregates

mmnominal size) and curing complete excluding cost of

formwork in (A) Foundation and Plinth

Supply, Installation, Testing and Commissioning of

Innovative Stone based Fencing Pole with 22 to 30 watt

LED lighting . on the theme of stone base pole height sould

be 0.85 mtr.(As per requirement & site condition).The pole

39 color, desing, logo another lettering, a written message, etc. 96 NOS 20,230

With custom mold making and design craftsmanship can

create on the stone intricate shapes and patterns, precisely

matching the representation of Mani Mandir/ Morbi

etc.Including All Civil Works.

( % Above OR Below : ............... in words .................................................) To be fill online only

 Quantity mentioned in BOQ is indicative and may vary as per the department requirement.

Signature of Tenderer : City Engineer (MMC)

Company's seal: Morbi Municipal Corporation