JJM-Edamalakudy-Noorady

Amount

Supply,Laying,Testing and Commissioning of 80mm GI RWPM at NOORADI

OD36354/2023-2024:Supply of 80 mm GI pipe ( Medium)

OD36355/2023-2024:Conveying and fixing by welding G.I. pipes including trenching and refilling etc., but excluding cost of pipes for External work: 80mm diameter nominal bore.

100.39.2:Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work: 80mm diameter pipe.

18.17.6:Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :80 mm nominal bore

100.98.440:Supply of CI Air Valve, Conforming to IS 14848 - 2000, Single Orifice, Small Orifice Type S1, Size 25mm.

100.32.1:Conveying and fixing C. I. Single Acting Air Valve of approved quality with bolts, nuts, rubber insertions etc., complete, but excluding the cost of air valve (tail pieces, if required, will be paid separately): 25mm Single Acting Air Valve.

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

OD36870/2023-2024:Conveying and supplying Steel reinforcement for RCC to the work site from Pettimudy by 4X4 vehicle. The rate arrived as per the existing rate for conveyance provided to vehicle owners by the Civil supplies department.

5.9.2:Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

OD36771/2023-2024:conveyance charge for the items like accro spans, props, scaffolding pipes, shuttering sheets, adjustable sheets, generators, tools, welding equipments, planks, runners, reppers, tierod, grinders, shuttering oil, accelerator or retarders for concrete, nails

Supply, laying,Testing and Commissioning of Distributions system and providing FHTCs to Nooradi-Working Charges CWPM - Working charges

OD36358/2023-2024:Supply of 80 mm GI pipe ( Medium)

OD36359/2023-2024:Supply of 100mm GI medium pipe

OD36360/2023-2024:Conveying and fixing by welding G.I. pipes including trenching and refilling etc., but excluding cost of pipes for External work: 80mm diameter nominal bore.

OD36361/2023-2024:Conveying and fixing by welding G.I. pipes including trenching and refilling etc., but excluding cost of pipes for External work: 100mm diameter nominal bore.

100.39.2:Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work: 80mm diameter pipe.

100.39.3:Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work: 100mm diameter pipe.

18.17.6:Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :80 mm nominal bore

100.98.440:Supply of CI Air Valve, Conforming to IS 14848 - 2000, Single Orifice, Small Orifice Type S1, Size 25mm.

100.32.1:Conveying and fixing C. I. Single Acting Air Valve of approved quality with bolts, nuts, rubber insertions etc., complete, but excluding the cost of air valve (tail pieces, if required, will be paid separately): 25mm Single Acting Air Valve.

100.60.21.1.1:Providing 15mm ( 1/2 inch ) GM Air Valve in the water meter assembly for 15mm water connection, using 20mm ( 1/2 inch ) PE Pipe, PE80, PN16, Conforming to IS 4984: 2016 or later edition and PP PN 16 Compression specials including cost of materials, consumables, hire for tools and labour charges etc. complete and as per the directions of the department officers.

OD36362/2023-2024:Providing 15mm (1/2 inch) house connection with 15mm water meter from existing AC / GI mains up to 125 mm dia., up to a length of 5m using 15 mm ( 1/2 inch ) GI Pipe, Medium, Conforming to IS IS-1239 (pt-I) 1990. or later edition and Compression / GM / Brass specials viz. brass ferrule, brass hexagonal nipple, GM full way wheel valve, bend, MTA, FTA, couplers, GI / MS Service Saddle of suitable size etc. and connecting with the mains, testing the joints etc. complete including trenching and refilling in all kinds of soil up to a depth of 1.50m for main line tracing and trench of average cross section 0.3m x 0.75m for laying connection pipe and service pipe, fixing water meter, lighting, watching, providing caution boards, traffic control etc. complete including cost of materials, hire for tools, cost of consumables and labour charges, including the cost of tested Class B Multijet water meter with ISI mark and Cast iron Water Meter box of minimum size 300mm x 200mm x 150mm, but excluding charges for cutting the concrete / tarred / bituminous roads etc, and as per the direction of the departmental officers.

OD36363/2023-2024:Construction of Stand post using 75 mm PVC pipe filled with cement concrete and concrete base slab for suitable size including charges for cost of PVC pipe ,concrete and Labour etc completed as per direction

18.12.1:Providing and fixing G.I. pipes complete with G.I fittings including trenching and refilling etc. External work15 mm dia nominal bore

OD36364/2023-2024:Providing 15mm CP Brass Tap in the water meter assembly for 15mm ( 1/2 inch ) water connection, using 15mm ( 1/2 inch ) GI Medium pipes, with specials including cost of materials, consumables, hire charges for tools and labour charges etc. complete and as per the direction of departmental officers.

OD36772/2023-2024:conveyance charge for the items like accro spans, props, scaffolding pipes, shuttering sheets, adjustable sheets, generators, tools, welding equipments, planks, runners, reppers, tierod, grinders, shuttering oil, accelerator or retarders for concrete, nails

Design and construction of 0.25MLD Slow Sand Filter at Nooradi and 0.05LL Clear water sump cum Tank at Nooradi

2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

OD36345/2023-2024:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5m to 3m, disposed earth to be levelled and neatly dressed.All kinds of soil.Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.

2.31:Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared

100.99.1:Add extra for the rate of Earth Work Excavation to account for the difficulty of excavation and the idling of the labour / machinery.

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

OD36349/2023-2024:Conveying and supplying cement, Fine aggregate, and coarse aggregates for 1:2:4 grade concrete to the work site from Pettimudy by 4X4 vehicle. The rate arrived as per the existing rate for conveyance provided to vehicle owners by the Civil supplies department.

5.33.1:Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work upto plinth level

5.33.2:Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work above plinth level upto floor V level

5.34.1:Extra for providing richer mixes at all floor levels. Note:- Excess/less cement over the specified cement content used is payable/ recoverable separately.Providing M-30 grade concrete instead of M-25 grade BMC/RMC. (Note:- Cement content considered in M-30 is @ 340 kg/cum).

OD36779/2023-2024:Conveying and supplying cement, Fine aggregate, and coarse aggregates for M30 grade concrete as per specification

5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

5.9.5:Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers

5.9.2:Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

5.9.3:Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform

5.9.6:Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts

5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

OD36348/2023-2024:Conveying and supplying Steel reinforcement for RCC to the work site from Pettimudy by 4X4 vehicle. The rate arrived as per the existing rate for conveyance provided to vehicle owners by the Civil supplies department.

50.6.1.2:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement: 6 coarse sand) etc complete.

13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

OD36827/2023-2024:Conveying of cement plaster and crystalline slurry to the work site from Pettimudy by 4X4 vehicle. The rate arrived as per the existing rate for conveyance provided to vehicle owners by the Civil supplies department.

21.1.1.1:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionAnodised aluminium (anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15)

21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness

21.17:Providing and fixing anodised aluminium grill ( anodised transparent or dyed to required shade according to IS : 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P brass/stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge.(Only weight of grill to be measured for payment ).

OD36830/2023-2024:Conveying of aluminium work for doors,windows and aluminium grill to the work site from Pettimudy by 4X4 vehicle. The rate arrived as per the existing rate for conveyance provided to vehicle owners by the Civil supplies department.

11.36:Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

OD36836/2023-2024:Conveying and supplying Tile to the work site from Pettimudy by 4X4 vehicle. The rate arrived as per the existing rate for conveyance provided to vehicle owners by the Civil supplies department.

22.23.1:Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineerin- charge. The product performance shall carry guarantee for 10 years against any leakage.For vertical surface two coats @0.70 kg per sqm

22.23.2:Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineerin- charge. The product performance shall carry guarantee for 10 years against any leakage.For horizontal surface one coat @1.10 kg per sqm.

10.6.1:Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x1.25 mm M.S. laths with 1.25 mm thick top cover

10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

OD36660/2023-2024:Conveying of paint to the work site from Pettimudy by 4X4 vehicle. The rate arrived as per the existing rate for conveyance provided to vehicle owners by the Civil supplies department.

100.36.1:Filling water with 5000 litre tankers fited in lorry and conveying water from a distance of 5 km (average) to the reservoir site and pumping the water into the reservoir of height not less than 3 m using 5 HP diesel engine pump set , hire for tanker lorry, tools and other appliences and cost of water etc. complete.

100.41.33:Supplying and fixing 500mm dia C.I. manhole cover with frame (medium duty) charges including all cost, labour charges etc., complete.

OD36829/2023-2024:Conveying of C.I Manhole cover,galvanised iron sheets, to the work site from Pettimudy by 4X4 vehicle. The rate arrived as per the existing rate for conveyance provided to vehicle owners by the Civil supplies department.

13.71:Lettering with black Japan pint of approved brand and manufacture

100.55.1:Supplying of 2 to 6 mm and 6 to 12 mm size fine pebble (pebbles shall be hard, clean, free from clay, dust and other impurities), stacking in standard heaps for measurement including cost, conveyance up to 5 km and labour charges for stacking, spreading, testing and as per the directions of the department officers etc. complete as per CPHEEO specifications.

100.55.4:Supplying and stacking for measurement of filter sand having effective size 0.45 to 0.70 mm and uniformity coefficient 1.30 to 1.7, of specific gravity in the range of 2.55 - 2.65 and hard and clean, free from clay, dust and other impurities including cost of materials, labour charges and conveyance of materials up to 5 km and as per the directions of the department officers etc. complete and as per CPHEEO specification.

OD36346/2023-2024:Supplying and fixing 80 mm CI vent cowl as per the direction of Dept.officers.The charges including all cost labour charges for fixing etc. complete

OD36347/2023-2024:Supplying and providing water level indicator to the tank using scale fabricated out of 2mm thick MS plate with in the frame work of suitable size MS square tube, 160mm PVC pipe for guiding the float, necessary pullies, suitable nylon thread for connecting float and level indicator, painting the entire structure, lettering etc complete including all charges for material and labour

10.26.1:Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approves steel primer.M.S. tube

OD36778/2023-2024:Conveying of Hand rails to the work site from Pettimudy by 4X4 vehicle. The rate arrived as per the existing rate for conveyance provided to vehicle owners by the Civil supplies department.

OD36351/2023-2024:Conveying and supplying filter media to the work site from Pettimudy by 4X4 vehicle. The rate arrived as per the existing rate for conveyance provided to vehicle owners by the Civil supplies department.

OD36352/2023-2024:Supply, installation, and commissioning of a pre-engineered, pre-fabricated, factory-manufactured Stainless steel storage Water Tank having a capacity of 10000 L(1Nos.). With 100% pure mirror polished ASI304 grade Stainless Steel and food-grade materials. Tanks shall comply with relevant spill level, air gap, and overflow requirements relative to Effective Capacity. All nuts and bolts used for the panels shall be a minimum of 12mm in size and hot-dip galvanized/Case hardened. Tanks shall be properly flushed out with clean water before being brought into service. TANK DIMENSIONS: The Tank's dimensions shall be 2260mm in diameter and 3200mm in height including stand DESIGN LIFE: The tanks shall have a design life of 10 years.

OD38658/2023-2024:conveyance of items required for the fabricating of steel tank.

OD36353/2023-2024:Extra for Conveying and supplying 40x20x20 cm solid block (Factory made) to the work site from Pettimudy by 4X4 vehicle. The rate arrived as per the existing rate for conveyance provided to vehicle owners by the Civil supplies department.

12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

10.2:Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

OD36777/2023-2024:Conveying of Structural steel work to the work site from Pettimudy by 4X4 vehicle. The rate arrived as per the existing rate for conveyance provided to vehicle owners by the Civil supplies department.

OD36638/2023-2024:conveyance charge for the items like accro spans, props, scaffolding pipes, shuttering sheets, adjustable sheets, generators, tools, welding equipments, planks, runners, reppers, tierod, grinders, shuttering oil, accelerator or retarders for concrete, nails

Supply, Erection, Testing and Commissioning of Pumpsets

OD36344/2023-2024:Design,Supply, testing,errection and commissioning of submerged pumpsets with required starter, cables etc as per CEA regulation 2010 for an operating head of 25 m and a total discharge of 0.8 lps, including cost of all required protection equipments , relays as per CEA regulations 2010 , Supply of pressure guages, Electric connection , interconnection with the Raw water pumping main, trail run etc. including cost of 30 m cable length for each pumpset ,specials required for carrying out the connections etc complete.<br>1. The pump set shall be of Compact Unitary monoblock construction. The pump casing shall be of high efficiency, Volute or Bowl diffuser Casing type with the Impeller mounted directly onto the Extended Solid Motor Shaft (without any couplings). <br>2. The pump maybe mounted directly into the water body (Canal / Sump)<br>3. Suction Strainer : The pump is fitted directly with a Suction Bell mouth to which is compulsorily fitted a Heavy duty Strainer (to avoid pick up of gravel, pebbles, vegetation, etc.). As per Documents.<br>4. Induction Motor (Submerged) End Design : <br>4.1. The motor shall be of Squirrel Cage, Induction type, Air Filled yet capable of Water Immersion upto 20mwc for S1 duty – Motors with Oil or Water filled windings shall not be allowed.<br>4.2. It is rated for 4l5V for upto 335kW & HT for larger ratings ± 10 % V, 3 phase 50 ± 5% c/s A.C. Its winding should be of Class “F or H” insulation * while the nominal temp rise of winding hotspot should not exceed that of class “B”. <br>4.3. The Motor Rating should be higher of the two criteria : <br>• 5% over maximum power consuption through out the range of perfomance at 50 Hz. OR<br>• 15% more than the pump shaft power consumed at duty point at 50 Hz.<br>4.4. Motor Cooling the motor can be cooled just by water immersion <br>4.5. Motor Protection <br>4.5.1. Thermal Overload Protectors (Bi Metallic Over Load Relays) should be embedded in each phase of the stator winding to detect overheating & trip the motor from the control panel in the event of the temperature exceeding the safe operating limit (above 130C). <br>4.5.2. To detect primary Mechanical Seal’s Leakage a Moisture Sensor shall be provided in intermediately Oil Chamber (& not in the Motor casing or else where) – this shall detect water mixing in oil by mode of increased leakage current from the moisture sensor.<br>4.5.3. Cables A watertight Cable Junction Box sealed from the motor shall be provided for the motor power and signaling cables. The cable shall be brought directly out of the submerged motor without joints, and shall be of sufficient length, minimum 10 m (to be seal jointed by the manufacturer for longer lenghts) outside adjacent to the wet well & above the HFL. They shall be sized in accordance with the electricity utility regulations and BS 7671. <br>5. Shaft & Bearings <br>5.1. The Solid Shaft shall be supported by heavy duty Ball or Roller bearings with a minimum L10 life of 75,000 hours & should be Permanently Greased <br>6. Stuffing Box / Oil Chamber <br>6.1. The pressurized entry of water into the motor (from the pump casing) should be prevented by Two separate mechanical seals in mounted in a Tandem mode within an oil chamber & the Primary (Inboard) seal should always be of Silicon Carbide or Tungsten Carbide faces to withstand erosive wear due to any silt particles.<br>(Efficiency-Min 70 %)<br><br>5% for 2 year warranty

Supply and installation of solar panels along with all accessories

OD36365/2023-2024:Design, Supply, testing, of solar power plant at specified location in Edamalakudi panchayath for a specified capacity, it include Polycarbonate, Transparent; with Fuse, MCB & SPD , Panel mounting Special structure on GI Plat form over the Sheet roof with door & walk way. It including copper road off suitable number with specific Standards. The structure is wiring with Open Conduit wiring with PVC conduits & fittings. Solar Modules: 10 Years Product Warranty & 25 years performance warranty as per MNRE standards. Breakage of glass is not covered under warranty for replacement. It includes manpower supply for conveying head load, loading and unloading and all associated works.

OD36866/2023-2024:conveyance of solar panal, batteries and required items for the function of the solar power plant

Design and Construction of Weir against Nooradi Reservoir

OD36342/2023-2024:Providing ring bund of width 2.0m and height 2.0m using earth filled cement bags, polythene sheets and bamboo including cutting of the Earth, filling, conveying and placing in position and dismantling & removing the same after completion of works properly as per the direction of the department officers including all cost of materials, labor charges etc complete.

100.7.1:Bailing out water with 5HP engine and pump set including conveyance to the site, erecting, dismantling and taking back of engine and pump, cost of fuel lubricating oil and other stores pay of staff etc., complete.

2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

2.9.3:Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m.Hard rock (blasting prohibited)

100.99.1:Add extra for the rate of Earth Work Excavation to account for the difficulty of excavation and the idling of the labour / machinery.

OD36343/2023-2024:DOWEL BARS - Supplying and Providing MS dowel bars of size 16 mm dia of 2.0m long (1m in rock and 1m in concrete) including drilling holes of 20mm dia and filling the gap with cement grout( 0.100kg/hole)etc

5.1.2:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size

OD36863/2023-2024:Conveying and supplying cement, Fine aggregate, and coarse aggregates for M30 grade concrete as per specification

5.9.2:Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

OD36846/2023-2024:Conveying and supplying Steel reinforcement for RCC to the work site from Pettimudy by 4X4 vehicle. The rate arrived as per the existing rate for conveyance provided to vehicle owners by the Civil supplies department.

50.2.25.1:Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge

OD36605/2023-2024:conveyance charge for the items like accro spans, props, scaffolding pipes, shuttering sheets, adjustable sheets, generators, tools, welding equipments, planks, runners, reppers, tierod, grinders, shuttering oil, accelerator or retarders for concrete, nails

coveyance charge

OD36356/2023-2024:100 MM GI

OD36357/2023-2024:80 MM GI coveyance charge

Bidder Name

Roopesh K Rajappan