Design, Supply, Installation, Testing and Commissioning of Pumping Machinery, Control Panels and Electrical Works at various Headworks, Filter plants and ESR of Jamnagar Municipal Corporation, District: Jamnagar, Gujarat

Name of Work: Bid Document for the Work of Design, Supply, Installation, Testing

and Commissioning of Pumping Machinery, Control Panels and Electrical Works at

various Headworks, Filter plants and ESR of Jamnagar Municipal Corporation,

District: Jamnagar, Gujarat

Estimated Cost: Rs.

Milestone Dates

Start Date for downloading of the 22.10.2026 from 18:00 pm

30.10.2026 at 12.00 am at JMC office, 2nd

Pre-bid meeting floor water works

Last date of online submission of 17.11.2026 up to 18:00 pm

Technical Proposal & Price Bid

Physical Submission of EMD, 18.11.2026 and 19.11.2026 during Office

Tender Fee, and PQ supporting hours up to 18:00 pm

Opening of the Bid Proposal 20.11.2026 from 16:00 pm

EXECUTIVE ENGINEER

JAMNAGAR MUNICIPAL CORPORATION

Jubilee Gardens, Nr. Lal Bunglow,

New Admin. Building, 3rd Floor

Jamnagar Municipal Corporation

ELECTRO-MECH WORK, AT 13 HEADWORK,JAMNAGAR VOLUME-III, PRICE BID

Bid Document for the Work of Design, Supply, Installation, Testing and Commissioning of

Pumping Machinery, Control Panels and Electrical Works at various Headworks, Filter

plants and ESR of Jamnagar Municipal Corporation, District: Jamnagar, Gujarat

Sr. No. CONTENTS Page No.

1 FORM OF PRICE PROPOSAL

3 SCHEDULES OF RATES & PRICES

5 SCHEDULE C - BREAKUP OF Payments

Jamnagar Municipal Corporation

ELECTRO-MECH WORK, AT 13 HEADWORK,JAMNAGAR VOLUME-III, PRICE BID

FORM OF PRICE PROPOSAL

CONTRACT No: TENDER NO.

Bidders are required to fill up all blank spaces in this Bid Form

The Executive Engineer

Jamnagar Municipal Corporation

Jubilee Garden, New Building, 3rd Floor,

SUB : Bid Document for the Work of Design, Supply, Installation, Testing and

Commissioning of Pumping Machinery, Control Panels and Electrical Works at

various Headworks, Filter plants and ESR of Jamnagar Municipal Corporation,

District: Jamnagar, Gujarat

We have examined the Conditions of Contract, Employer's Requirements, Schedules,

and Addenda Nos. _____ and the matters set out in the Appendix hereto. We have

understood and checked these documents and have not found any errors in them. We

accordingly offer to design, execute commission. The said Works and remedy any

defects, fit for purpose in conformity with these documents and the enclosed Proposal, for

the fixed lump sum of Rs.____________________________________ (in currencies, of

payment) or other such sums as may

be determined in accordance with the terms and conditions of the Contract. The above

We agree to abide by this Bid until 180 days and it shall remain binding upon us and maybe

accepted at any time before that date. We acknowledge that the Appendix forms part of our Bid.

If our bid is accepted, we will provide the specified performance security, commence the Works

as soon as reasonably possible after receiving the Employer's Representative's notice to

commence, and complete the Works in accordance with the above-named documents within the

time stated in the Appendix to Technical Proposal.

Unless and until a formal Agreement is prepared and executed this, Bid, together with your

written, acceptance thereof, shall constitute a binding contract between us.

Jamnagar Municipal Corporation

ELECTRO-MECH WORK, AT 13 HEADWORK,JAMNAGAR VOLUME-III, PRICE BID

Commissions or gratuities, if any, paid or to be paid by us to agents relating to this Bid, and to

contract execution if we are awarded the contract, are listed below:

Name and Address Amount and Purpose of

Of Agent Currency Commission

(If none, state “none”)

We understand that you are not bound to accept the lowest or any bid you may receive.

We are, Gentlemen

Yours faithfully

Signature _______________________ in the capacity of ________________ duly authorized to

sign bids for and on behalf of

Jamnagar Municipal Corporation

ELECTRO-MECH WORK, AT 13 HEADWORK,JAMNAGAR VOLUME-III, PRICE BID

APPENDIX TO PRICE PROPOSAL

Note: with the exception of the items for which the Employer's requirements have been

inserted, the following information must be completed before the Bid is submitted]

Conditions of Contract

The Executive Engineer

Water Works Branch

Employer’s name and address Jubilee Gardens, Nr. Lal Bungalow,

New Admn. Building, 3rd Floor

Contractor’s name and address

Time for notice to commence

Normal Working Period

Name and address of the Employer’s

To be nominated by Employer at the time of Award of

Representative/Engineer/Engineer's

Time for Completion of construction of 12 months

Defects liability period Two year

Language for communications English

Electronic transmission systems

Confidential Details ______________________________________

Currency of all payments Indian Rupees

Amount of insurance for design Indian Rupees million

Jamnagar Municipal Corporation

ELECTRO-MECH WORK, AT 13 HEADWORK,JAMNAGAR VOLUME-III, PRICE BID

As per labour court decision per occurrence,

Amount of third party insurance

number of occurrences: maximum three

Periods for submission of insurance

a) Evidence of insurance 30 days from commencement date

b) Relevant policies 60 days -do-

Arbitration Rules Municipal Commissioner is sole arbitrator.

Place of arbitration Jamnagar, Gujarat, India.

Total amount of advance payments Nil

Total amount of advance payments Nil

10% of the construction contract price.

(5% Performance Bank Guarantee + @ 2.5 % of

the value of work Shall be Submitted in FDR/D.D.

Limit of Retention Money form at the time of agreement. +@ 2.5% of the

value of work done Shall also be deducted from

Minimum amount of Interim Payment

1% of the Construction Contract Price

Payments in Local and Foreign Currencies In Indian Rupees

Within 15 days from the date of Letter of

Time for access to the Site

For Construction Contract

Amount of performance security 5 % of the Contract Price in bond as per approved

0.1% per day with maximum limit as 10% of the

Delay damages for delay Construction Contract Price or as decided by

Municipal Commissioner.

Solvency certificate for an amount equal to 20 % of

Solvency Certificate

the estimated cost of work.

1% labour Welfare cess as per act 1996 (Non

Labour Welfare Cess

refundable) will be deducted from each running bill

Water and electricity for this work will be provided

Water, Electricity

by JMC with free of Cost.

The rates to be quoted by the Contractor must be

exclusive of GST but inclusive of all other

Rates to be quoted without GST

Taxes.GST will be paid extra on the admissible

payment as per the tender rates.

Jamnagar Municipal Corporation

ELECTRO-MECH WORK, AT 13 HEADWORK,JAMNAGAR VOLUME-III, PRICE BID

1) This bidding process is for Bid Document for the Work of Design, Supply, Installation,

Testing and Commissioning of Pumping Machinery, Control Panels and Electrical Works

at various Headworks, Filter plants and ESR of Jamnagar Municipal Corporation, District:

Jamnagar, Gujarat

2) The process requires that the bidder shall quote his firm and fixed price for the work

shall remain firm and fixed during the entire period of performance of the contract and

there is no clause permitting price escalation.

3) The prices and rates shall be filled up in schedule and in the formats that are made a part

of the price bid. The contractors are required to fill up these schedules in proper manner.

not be valid and will be outright rejected. Computer generated e-Tender print will only

be considered for price proposal.

4) The design obligation and responsibility of the bidder has been properly defined in the bid

with break-up for items listed in the Schedule-Prices quoted in Schedule- ABSTRACT

(Grand Summery) only will be considered for price evaluation & shall form a part of the

Contract Agreement.

6) Schedule (Payment Schedule) gives the basis of interim payment for construction of civil

out a schedule of Interim payments during construction with the successful bidder.

actual work done.

8) The bidder shall be deemed to have allowed in his price for provision, maintenance and

final removal of all temporary works of whatsoever nature required for construction

including temporary bunds, diverting water, pumping, dewatering etc. for the proper

Jamnagar Municipal Corporation

ELECTRO-MECH WORK, AT 13 HEADWORK,JAMNAGAR VOLUME-III, PRICE BID

execution of works. The rates shall also be deemed to include any works and setting out

that may be required to be carried out for laying out of all the works involved.

Specifications and other sections of these bid documents and these documents are to be

taken as mutually explanatory of one another.

10) Prices quoted by the bidder shall be firm for the entire period of Contract without any

11) The bidder shall interpret the data furnished and carry out any additional survey work, or

investigation work required at his own cost.

12) The prices quoted shall also include the cost of materials utilized for testing.

13) The bidder should acquaint himself with the site conditions including the access to

Worksite. The successful bidder shall have to make suitable access to worksites at his

own cost. These accesses will be used by the other contractors working for Municipal

Corporation, Jamnagar

14) 5% of the contract value shall be retain unpaid to cover the defect liabilities period

for Two years after the completion of work with all respect.

15) For construction supervision & inspection of material Jamnagar Municipal Corporation will

deploy T.P.I / P.M.C and charges of T.P.I / P.M.C will be borne by JMC.

16) Prices shall be EXCLUSIVE OF GST but inclusive of all the taxes and duties prevailing at

the time of tender submission, statutory variation if any will be on account of Contractor.

17) 1% labour cess will be recovered from each running account bill.

18) The rates to be quoted by the Contractor must be exclusive of GST but inclusive of all

other Taxes.GST will be paid extra on the admissible payment as per the tender rates.

19) Pipe should be laid as per Longitudinal section and Instruction of Engineer in charge

20) The change in diameter of pipe as per instruction of engineer in charge, looking to the site

condition, shall binding to contractor.

Jamnagar Municipal Corporation

ELECTRO-MECH WORK, AT 13 HEADWORK,JAMNAGAR VOLUME-III, PRICE BID

21) Contractor shall have to carry out lowering, laying of pipe balance/available with JMC, pipe

shall be transported by the contractor from gokulnagar ESR / N.R.I. bungalow store at his

own cost as per JMC instructions.

22) Before preparation of final bill after completion of work, the detail of work done shall be

incorporated in Google map and auto cad map & soft copy & hard copy for the same shall

be submitted by the contractor to JMC.

23) Pump, Panel, pipes & valves other electro mechanical items supplied by the contractor &

remain unused, shall be paid at 100% rate & shall be stacked at the place, instructed by

engineer- in – charge.

24) Apart from the items mentioned in Price bid schedule if there will be any extra item

necessary to execute will be paid as per GWSSB/PWD SOR of relevant Year.

25) If Quantity of any item excess than tender quantity by more than 10% percentage than it

will be paid as per PWD/GWSSB SOR rate of year in which item is executed or quoted

tender rate by contractor whichever is lower/less for this tender.

26) During execution if existing services namely; water supply pipeline, sewage water line,

cable etc. will be damaged by the agency same shall have to be got repaired without any

extra cost. Thus, while quoting the prices, above matter should be kept in mind.

27) For excavation of trench, the agency shall have to locate first the underground services

like; water supply pipeline, water connection lines, pipe gutters, Gas pipeline, telephone

cables, electric cables etc., and thereafter upon taking the prior approval of the Engineer-

in-charge, the excavation can be carried out by using JCB machine.

28) The rates are inclusive of dewatering, if required.

29) After refilling the trenches the excess stuff to be removed from the site after proper

cleaning as per directed by engineer in charge even to dispose the same to at any chain

age (K.m) even outside the JMC limit. The contractor will not claim the JMC for the same

in any dispute for such carting charges.

30) After supplying the material, the responsibility of that material will be on contractors in

terms of loss/damages etc.

31) The pipe line is to be so laid parallel or crossed to existing pipeline /domestic water

connection which is at present running and as such during the execution of work if existing

line will be damaged. Jamnagar Municipal Corporation will not responsible the contractor

has to repair the same on his own risk and cost and for the same no payment will be

Jamnagar Municipal Corporation

ELECTRO-MECH WORK, AT 13 HEADWORK,JAMNAGAR VOLUME-III, PRICE BID

32) Contractor is bound to make work progress as per given time limit of work and work

quality is to be maintained as per item/ IS specification. During work execution if question

arise of malfunction or serious complaint regarding work are noticed by department in

such case JMC Authority reserves the right to debarred contractor and no payment will be

given to contractor and all deposits will be for fitted by JMC. Contractor has to take clear

note of this condition before bidding for this work.

33) After laying of pipeline proper refilling and levelling is to be done as per satisfaction and

instruction of engineer in charge. Any other structure/ gas pipeline/cable of other authority

should not be damaged by negligence of contractor. Contractor will be responsible to

repair such damage at his own cost.

34) After dismantling the excess stuff to be removed from the site after proper cleaning as per

directed by engineer in charge even to dispose the same to at any chainage (K.m) even

outside the JMC limit. The contractor will not claim payment from the JMC for the same in

35) During dismantling if any None use Existing pipeline/Valve is removed from site,

contractor is bound to stacked and transport such material at JMC Store as directed by

Engineer in charge & it will be JMC” s Property.

36) Any other structure/private property or pipeline of JMC OR OTHER area should not be

damaged by negligence of contractor. Contractor will be responsible to repair such

damage at his own cost.

37) Contractor shall also furnish to the Authority an irrevocable and unconditional guarantee

as an Additional Performance Security (The “Additional Performance Security”) for an

amount calculated as under

i) If the Contract Price offered by the Selected Bidder is lower than 10% but upto 20% of

the Estimated Project Cost, then the Additional Performance Security shall be

calculated @ 20% of the difference in the (i) Estimated Project Cost (as mentioned in

Bid Document) - Minus 10% of the Estimated Project Cost and (ii) Contract Price

offered by the selected Bidder.

38) All Running bills or Bank Guarantee will be refund to Contractor after verification of all Bills

GST and Security Deposit/Retention Money will be released only after verification of EPF

& ESIC through account department.

39) For Installation of New Pumping Machinery/Electrical panels Connection of delivery pipe

with Main Header pipe is to be provided by contractor at his own cost No extra payment

will be given and dewatering / slab cutting by breaker for pump installation will be done by

contractor at his own cost. No extra Payment will be given by JMC.

Jamnagar Municipal Corporation

ELECTRO-MECH WORK, AT 13 HEADWORK,JAMNAGAR VOLUME-III, PRICE BID

NAME OF SCHEME –

Bid Document for the Work of Design, Supply, Installation, Testing and

Commissioning of Pumping Machinery, Control Panels and Electrical Works at

various Headworks, Filter plants and ESR of Jamnagar Municipal Corporation,

District: Jamnagar, Gujarat

The bidder shall quote his firm and fixed price for the entire work under this Contract, defined in

more details in various sections of this bid document.

Schedule showing the approximately the materials to be supplied to the contractor from

government stores for the work to be executed and the rate at which they are to be charged.

Rate at which the

Sr. material will be charged Place of

Particular Qty.

No. to the contractor Delivery

1. The contractor submitting the Tender shall see that the rate in Schedule-A are filled in by the

Engineer in Charge at the time of issue tender.

2. The contractor while submitting the tender shall provide his own arrangement at his own cost

for loading, unloading, and transporting safety to the site of work the cement stipulated in

3. Binding wire of 15 gauge of thinner gauge required for placing the reinforcement in position

shall be provided at his own cost.

4. All the materials required for the items other than labour in Schedule-A but available with the

dept. will be issued on request to the contractor. (For use in this contract only) at prevailing

market rates or departmental issue rates whichever is higher.

5. All the surplus materials supplied by the dept. As mentioned in schedule-A should be handed

over to the Department by the contractor at the Govt. stores as directed.

6. The materials mentioned in schedule-A shall have to be checked for their correctness and

soundness by the contractor before taking the delivery of the materials from the Government.

7. Necessary cement will be purchased by the agency at their own cost from open market.

8. The persons of firm submitting the Tender should see that rates in the above schedule are

filled up by the Executive Engineer, on the issue of form prior to the submission of the Tender.

Jamnagar Municipal Corporation

ELECTRO-MECH WORK, AT 13 HEADWORK,JAMNAGAR VOLUME-III, PRICE BID

9. Carting of above materials should be done by contractor at his own cost.

10. Contractor should return the balance materials in good and acceptable condition, otherwise

recovery at the double rates will be affected in view of Clause 12.4.

Date: Signature of contractor Executive Engineer

Jamnagar Municipal Corporation

Jamnagar Municipal Corporation

JAMNAGAR WATER SUPPLY WORKS VOL-III PRICE BID

SUMMARY (SCHEDULE-B)

Name of Work: Bid Document for the Work of Design, Supply, Installation, Testing and Commissioning of Pumping Machinery,

Control Panels and Electrical Works at various Headworks, Filter plants and ESR of Jamnagar Municipal Corporation, District:

Jamnagar, Gujarat

SCHEDULE -B ABSTRACT (GRAND SUMMARY)

Sr. No. Name of work Tender Amount (In Rs.)

SCHEDULE - B1 Mechanical Work at 13 Headworks

SCHEDULE - B2 Electrical Work at 13 Headworks

Jamnagar Municipal Corporation

JAMNAGAR WATER SUPPLY WORKS VOL-III PRICE BID

NAME OF WORK: BID DOCUMENT FOR THE WORK OF DESIGN, SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF

PUMPING MACHINERY, CONTROL PANELS AND ELECTRICAL WORKS AT VARIOUS HEADWORKS, FILTER PLANTS AND ESR

OF JAMNAGAR MUNICIPAL CORPORATION, DISTRICT: JAMNAGAR, GUJARAT

SCHEDULE-B1 - MECHANICAL WORKS

Sr.No Item Description Qty. Unit Amount in Rs.

A MECHANICAL WORKS

1 SUBMERSIBLE PUMP WITH INDUCTION MOTOR:

Design, engineering, procurement supply, testing and commissioning of Open

Well submersible pump type having C.I, FG-260 casing, SS impeller driven by

three-phase 415 V, 50 Hz, AC wet type squirrel cage induction motor having PVC

insulated multi core copper conductor cable of 30-meter Length as per

specification and data sheet pump shall be operated @ 1450 Rpm. the scope shall

also include all required accessories complete.

Capacity: 810 m³/hr., Head: 48 m, Induction Motor rating mini. 200 HP. (Und-1

Jamnagar Municipal Corporation

JAMNAGAR WATER SUPPLY WORKS VOL-III PRICE BID

NAME OF WORK: BID DOCUMENT FOR THE WORK OF DESIGN, SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF

PUMPING MACHINERY, CONTROL PANELS AND ELECTRICAL WORKS AT VARIOUS HEADWORKS, FILTER PLANTS AND ESR

OF JAMNAGAR MUNICIPAL CORPORATION, DISTRICT: JAMNAGAR, GUJARAT

SCHEDULE-B1 - MECHANICAL WORKS

Sr.No Item Description Qty. Unit Amount in Rs.

1.1 SUBMERGED CENTRIFUGAL (SCF) PUMP MOTOR SET:

Supply, Installation, Testing and Commissioning of approved make Submerged

Centrifugal Pump for water of indicated capacity and head, along with all

necessary assembly, discharge head, base channel / RSJ etc. suitable to couple

with electric motor as described below and of M.O.C.:

Impeller with sealing ring-bronze, M.S Galvanised Lifting Chain with shackle-

length (As per site condition), line Shaft with coupling-S.S., Bowl & suction bell -

C.I. with 1.5 to 2% Ni, Discharge head, motor stool and base plate M.S., Line

bearing-thordon type, SS-304, 1"x1" opening Suction Strainer made from 3 mm

round bars, Column Pipe of M.S. ERW of dia. and each coloumn length will be as

per mfg. std. and total length as per actual site requirement, sole plate, Flex. pin-

bush coupling, foundation bolts, with cable minumn length 20 mtr for each run etc.

as per drg., Specification and IS.with RCC Slab cutting as per required size at site.

Capacity: in m³/hr.

Induction Motor rating mini.: in HP.

INDUCTION MOTOR FOR SCF PUMP

Supply Installation Testing and Commissioning (SITC) of approved make, energy

efficient, Efficiency Class-IE3, Vertical flange mounting, solid shaft, squirrel case,

Induction Motor rating mini. 55 HP or higher as per IS and as per pump

manufacturer recommendation, 3Phase, 415V, 50Hz., AC supply, maxi.1500 RPM

synchronous speed and having TEFC enclosure with Class F insulation (temp.

rise limited to Class B) with RTD/BTD.

Capacity: 291 m³/hr., Head: 35 m, Induction Motor rating mini.60 HP. -

Jamnagar Municipal Corporation

JAMNAGAR WATER SUPPLY WORKS VOL-III PRICE BID

NAME OF WORK: BID DOCUMENT FOR THE WORK OF DESIGN, SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF

PUMPING MACHINERY, CONTROL PANELS AND ELECTRICAL WORKS AT VARIOUS HEADWORKS, FILTER PLANTS AND ESR

OF JAMNAGAR MUNICIPAL CORPORATION, DISTRICT: JAMNAGAR, GUJARAT

SCHEDULE-B1 - MECHANICAL WORKS

Sr.No Item Description Qty. Unit Amount in Rs.

1.1.1 Capacity: 437 m³/hr., Head: 44 m, Induction Motor rating mini.120 HP.-

Capacity: 350 m³/hr., Head: 35 m, Induction Motor rating mini. 75 HP. - (Bedi) 2 Set 846199

1.1.3 Capacity: 400 m³/hr., Head: 35 m, Induction Motor rating mini.75 HP.

Capacity:625 m³/hr., Head: 40 m, Induction Motor rating mini.150 HP. - (Solarium) 2 Set 1765715

1.1.5 Capacity: 648 m³/hr., Head: 36 m, Induction Motor rating min.120 HP.-

1.1.6 Capacity:650 m³/hr., Head: 30 m, Induction Motor rating mini.100 HP.- (Khijadia

1.1.7 Capacity: 750 m³/hr., Head: 30 m, Induction Motor rating mini.150 HP. - (Patel

1.1.8 Capacity: 825 m³/hr., Head: 21 m, Induction Motor rating mini.100 HP.- (Patel

Jamnagar Municipal Corporation

JAMNAGAR WATER SUPPLY WORKS VOL-III PRICE BID

NAME OF WORK: BID DOCUMENT FOR THE WORK OF DESIGN, SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF

PUMPING MACHINERY, CONTROL PANELS AND ELECTRICAL WORKS AT VARIOUS HEADWORKS, FILTER PLANTS AND ESR

OF JAMNAGAR MUNICIPAL CORPORATION, DISTRICT: JAMNAGAR, GUJARAT

SCHEDULE-B1 - MECHANICAL WORKS

Sr.No Item Description Qty. Unit Amount in Rs.

1.2 VERTICAL SUBMERGED CENTRIFUGAL (SCF) PUMP MOTOR SET:

Supply, Installation, Testing & Commissioning of Submerged Centrifugal Pump

with Auto coupling with necessary accessorise like integral Bend, Guide Pipe

Length:(as per site condition) (Parallel), M.S Galvanised Lifting Chain with

shackle-length (As per site condition), SS CF8M impeller, C.l casing, SS316 shaft

suitable for 3 phase, 415V, 50 Hz, AC Supply, Submersible motor having TEFC

enclosure with Class F insulation and lP 68 protection. The Pump shall be

operated at 1450 RPM. (20 mtr 3 core round copper conductor for each run, PVC

insulated cable for each pump-motor set). Casing C.l, SS CF8M impeller, Bronze

casing wearing ring and bearing bush, Mechanical seal Sic Vs Sic, CS/SS

Bearing, SS Shaft with sleeve, SS Motor Cooling Jacket, SS strainer and MS

motor body. with RCC Slab cutting as per required size at site.

Capacity: in m³/hr.

Induction Motor rating mini.: in HP.

Capacity: 400 m³/hr., Head: 35 m, Induction Motor rating mini.75 HP. -

(Gokulnagar & Ravipark)

Capacity:440 m³/hr., Head: 30 m, Induction Motor rating mini.70 HP. - (Navagam) 2 Set 789786

1.2.2 Capacity:455 m³/hr., Head: 50 m, Induction Motor rating mini.130 HP. - (Sasoi

1.2.3 Capacity: 950 m³/hr., Head: 36 m, Induction Motor rating mini.180 HP. -

Jamnagar Municipal Corporation

JAMNAGAR WATER SUPPLY WORKS VOL-III PRICE BID

NAME OF WORK: BID DOCUMENT FOR THE WORK OF DESIGN, SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF

PUMPING MACHINERY, CONTROL PANELS AND ELECTRICAL WORKS AT VARIOUS HEADWORKS, FILTER PLANTS AND ESR

OF JAMNAGAR MUNICIPAL CORPORATION, DISTRICT: JAMNAGAR, GUJARAT

SCHEDULE-B1 - MECHANICAL WORKS

Sr.No Item Description Qty. Unit Amount in Rs.

Supply, Installation, Testing and Commissioning of ISI mark CI D/F Sluice Valve

as per IS 14846 PN 1.0 with Electrically / Manually operated of following sizes

with SS 304 seat rings, SS rising spindle with all hot dipped galvanised hardwares,

bolts, nuts & washers, gaskets including all taxes, insurance, transportation, 24 No. 153177

freight charges, Inspection Charges, loading unloading, conveyence to pump

house, stacking, security etc. complete as per IS and Specification. including

excavation and refilling required as per site.

Size: 300 mm NB (Electrically Operated - On Delivery of each Pump)

Size:50 mm NB (Manually Operated - On header for Drain) 13 No. 3271

3 Supply, Installation, Painting, Testing and Commissioning of double flanged CI

Dual Plate Check Valve conforming to API 594 & API 598 PN 1.0 Class 300 with

CS dual door, hinge pin & stop pin of SS 410 , springs of AISI 304 and seat of SS

304 , along with all required accessories, gaskets and hardwares, etc. and as per

specification. including excavation and refilling required as per site.

Size : 300 mm NB (On delivery of each SCF Pump)

4 Supply, Installation, Painting, Testing and Commissioning of Electrcally Gear

operated ISI mark CI D/F Butterfly Valve as per IS 13095, PN 1.0 with sleeve of

EPDM & disc, shaft & internal parts of SS 410 along with gaskets and all

other necessary hardware etc. of following diameter including all taxes, insurance,

transportation, freight charges, Inspection Charges loading unloading, conveyence

to pump house stacking, security etc. complete as per IS and Specification.

including excavation and refilling required as per site.

Size: 500 mm NB (Electric actuator operated on Header Pipe)

Size: 700 mm NB (Electric actuator operated on Header Pipe) 1 No, 257334

Jamnagar Municipal Corporation

JAMNAGAR WATER SUPPLY WORKS VOL-III PRICE BID

NAME OF WORK: BID DOCUMENT FOR THE WORK OF DESIGN, SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF

PUMPING MACHINERY, CONTROL PANELS AND ELECTRICAL WORKS AT VARIOUS HEADWORKS, FILTER PLANTS AND ESR

OF JAMNAGAR MUNICIPAL CORPORATION, DISTRICT: JAMNAGAR, GUJARAT

SCHEDULE-B1 - MECHANICAL WORKS

Sr.No Item Description Qty. Unit Amount in Rs.

5 Supply, Installation, Painting, Testing and Commissioning of CI Tempor Proof

Air Valve with Isolation Sluice Valve as per IS 14845 PN-1.0 & IS-14846 PN-1.0

respectively with SS304 float, gun metal nozzle, complete hardware's, bolts, nuts

& washers, gaskets etc. including all taxes, Insurance, Transportation, freight 13 No. 16758

charges, Inspection charges, loading, unloading, conveyance to departmental

stores, stacking, security etc. as per IS and Specification.

Size: 100 mm NB - Pn 1.0 (On Header pipe)

Supply, Gas cutting of pipe, Fabrication of reducer & expander, welding,

Installation, testing and commissioning of MS pipe, specials, reducer, expander,

Tees, Bends etc. conforming to IS 3589 flanges confirming to IS 6392-PN-1.0,

fabricated from MS. plate with necessary supports & anchoring. Pipe fabricated 235 RMT 4650

from MS plate. (Excluding supply of flange) including excavation and refilling

required as per site.

Size : 300 mm NB X Mini. 5.6 mm Thk (Each Pump delivery)

Size : 400 mm NB X Mini. 6.3 mm Thk (Each Pump delivery) 15 RMT 6313

Size : 400 mm NB X Mini. 6.3 mm Thk ( Header) 50 RMT 6313

Size : 500 mm NB X Mini. 5.6 mm Thk ( Header) 90 RMT 7293

Size : 700 mm NB X Mini. 6.3 mm Thk ( Header) 10 RMT 11066

Jamnagar Municipal Corporation

JAMNAGAR WATER SUPPLY WORKS VOL-III PRICE BID

NAME OF WORK: BID DOCUMENT FOR THE WORK OF DESIGN, SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF

PUMPING MACHINERY, CONTROL PANELS AND ELECTRICAL WORKS AT VARIOUS HEADWORKS, FILTER PLANTS AND ESR

OF JAMNAGAR MUNICIPAL CORPORATION, DISTRICT: JAMNAGAR, GUJARAT

SCHEDULE-B1 - MECHANICAL WORKS

Sr.No Item Description Qty. Unit Amount in Rs.

Supply, Gas cutting of pipe, Fabrication of reducer & expander, welding,

Installation, testing and commissioning of MS pipe, Specials, reducer, expander

etc. conforming to IS 3589 flanges confirming to IS 6392-PN-1.0, fabricated from

MS. plate with necessary supports & anchoring. Pipe fabricated from MS plate.

(Excluding supply of flange)

Size : 400 mm NB X Mini. 6.3 mm Thk ( for Header)

Size : 500 mm NB X Mini. 5.6 mm Thk ( for Header) 10000 KG 109.36

Size : 700 mm NB X Mini. 6.3 mm Thk ( for Header) 1000 KG 109.36

8 Supply, welding , Installation, testing & commissioning of MS flat machnied faced

flanges confirming to IS 6392 & drilled to IS - 1538 with drilling off center bolt

holes and flange thickness as per PN 1.0 including cutting & welding.

Size : 300 mm NB (Drilled) For Each Pump Delivery

Size : 400 mm NB (Drilled) For Each Pump Delivery 20 Nos. 6867

Size : 400 mm NB (Drilled) For Header 4 Nos. 12208

Size : 500 mm NB (Drilled) For Header 26 Nos. 12208

Size : 500 mm NB (Drilled) 10 Nos 13080

Size : 700 mm NB (Drilled) For Header 10 Nos. 12208

Jamnagar Municipal Corporation

JAMNAGAR WATER SUPPLY WORKS VOL-III PRICE BID

NAME OF WORK: BID DOCUMENT FOR THE WORK OF DESIGN, SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF

PUMPING MACHINERY, CONTROL PANELS AND ELECTRICAL WORKS AT VARIOUS HEADWORKS, FILTER PLANTS AND ESR

OF JAMNAGAR MUNICIPAL CORPORATION, DISTRICT: JAMNAGAR, GUJARAT

SCHEDULE-B1 - MECHANICAL WORKS

Sr.No Item Description Qty. Unit Amount in Rs.

Size : 700 mm NB (Drilled) 1 Nos 13080

9 SITC of Flange ends Expansion Bellow as per EJMA standards of overall length of

minimum 300 mm, design for 15 mm axial compression and 5 mm axial extension

with tie rod etc of following MoC and Pressrure rating MoC - Bellow SA 240 Gr

304; Internal Sleeve : SA 240 Gr 304; Welends : IS 2062 Gr. B ( Drilling as per IS

1538 / IS 6392 ) & Limit Rod and Nuts : CS - IS 1367 23 Nos. 10200

Size : 300mm x 300 mm ( L ) (Delivery of each Pump)

Size : 400mm x 400 mm ( L ) (Delivery of each Pump) 2 Nos. 16500

10 Providing, Supplying at site of work with freight, loading, unloading carting, etc.

including all taxes and duties complete such as joints, channels, angles, plates, 13500 KG 64.83

iron rails, etc. below 10 mm thickness as per relevant IS and as per specification

11 Labour Charges for lowering, laying, Fixing with fabrication various size section of

MS such as joints channel, angles, plates, etc Complete as per relevant IS and as 12000 KG 11.365

per specification.

12 Providing and fitting chain pulley block with triple gear arrangement, lifting hook,

load chain & hand chain & locking device etc.

Capacity: 3T (Span, Long travel, Lift as per Site Situations and Site Engineer In-

Total of Mechanical Works

Jamnagar Municipal Corporation

JAMNAGAR WATER SUPPLY WORKS VOL-III PRICE BID

NAME OF WORK: BID DOCUMENT FOR THE WORK OF DESIGN, SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF

PUMPING MACHINERY, CONTROL PANELS AND ELECTRICAL WORKS AT VARIOUS HEADWORKS, FILTER PLANTS AND ESR

OF JAMNAGAR MUNICIPAL CORPORATION, DISTRICT: JAMNAGAR, GUJARAT

SCHEDULE-B2 - ELECTRICAL WORKS

No Item Description Qty. Unit Amount in Rs.

B ELECTRICAL WORKS

1.0 11 kV SWITCHYARD / TWO POLE (DP) STRUCTURE:

Supply, Installation, Testing and Commissioning of 11 kV, 3 Phase, 50 Hz,

Two Pole Structure made of 6" X 3" 'I' section girder having min. 9mtr. length,

4" X 2" M.S. channels, angles, clamps, nuts, bolts, stay wires including

earthing system etc. suitable for erection of following / indicated accessories

duly connected with ACSR conductor as per approved drawings & in

compliance with requirements of IS/IEC

(a) 11kV 200A DO (drop out) fuses with S.R.B.P. tubes carries (03 nos.)

(b) 11kV 400A G.O.D. switch complete with insulators, operating handle with 2.00 No. 120663.00

galvanized pipe, square bar etc. (01 set)

(c) 11kV lightning arrestors with clamps (03 nos.)

(d) 11kV shackle (Disc/Pin/Post) as required insulators (06 nos.)

(e) ACSR Dog Conductor (mini. 30Mt.)

(f) 11 kV fiber operating rod

(g) 20 mm dia. GI stay sets (2 sets), required foundation etc.and to be

painted with two coat of red oxide and final two coat of Aluminium paint at

site as per IS, Specification and Drg.

1.1 Supply, Installation, Testing & Commissioning of Approved make Outdoor

type One way, Non-Extensible, Manual 11kV, 21kA, 630A Ring Main Unit

with 01 Cable Housing + 01 Manual Vacuum Circuit Breaker (with 01 Set of 1.00 No. 339250.00

CTs + 01 No. Self Powered Numerical Relay) as per IS

Jamnagar Municipal Corporation

JAMNAGAR WATER SUPPLY WORKS VOL-III PRICE BID

NAME OF WORK: BID DOCUMENT FOR THE WORK OF DESIGN, SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF

PUMPING MACHINERY, CONTROL PANELS AND ELECTRICAL WORKS AT VARIOUS HEADWORKS, FILTER PLANTS AND ESR

OF JAMNAGAR MUNICIPAL CORPORATION, DISTRICT: JAMNAGAR, GUJARAT

SCHEDULE-B2 - ELECTRICAL WORKS

No Item Description Qty. Unit Amount in Rs.

1.2 SITC OF HV CABLES

Supply, laying, testing & commissioning of 6.35 / 11 kV (E) grade, XLPE

insulated, stranded Aluminium conductor, galvanised steel flat strip / round

wire armoured, extruded PVC type ST2 sheathed, heavy duty cable (to be

laid on wall surface with necessary clamps / in existing cable trench / cable

trays / conduit / pipe sleeves at road crossing or floor as per site requirement)

conforming to IS:7098 (Part-2) & IEC:60502 (Part-2) of following sizes ( DP

Structure to HT Panel, HT Panel to Transformer)

3 Core x 240 Sqmm

1.3 Providing & fitting Heat Shrink Cable Termination/ Jointing kits for 6.6 kV

(UE) / 11 kV (E) grade XLPE insulated cable including necessary earth

connectivity connection, material & consummables making the termination/

joint complete ensuring the joint resistance is within the permissble limit as 4.00 Nos. 4798.00

per IS, of following types & sizes:

Indoor Termination Kit Suitable for 3 Core x 240 Sqmm

Outdoor Termination Kit Suitable for 3 Core x 240 Sqmm 2.00 Nos. 6763.00

2.0 DISTRIBUTION TRANSFORMER

SITC of outdoor type, three phase, oil immerged, distribution transformer of

required KVA & voltage ratio, copper double wound, vector group - Dyn11,

HV delta connected & LV star connected with neutral brought out connected

to provide separate earthing terminals, bushing / cable box on HV side and

cable box on LV side suitable for cables or bus duct as per requirement with

standard fittings, conforming to IS: 1180 (Part-1) / 2014 with its latest

Jamnagar Municipal Corporation

JAMNAGAR WATER SUPPLY WORKS VOL-III PRICE BID

NAME OF WORK: BID DOCUMENT FOR THE WORK OF DESIGN, SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF

PUMPING MACHINERY, CONTROL PANELS AND ELECTRICAL WORKS AT VARIOUS HEADWORKS, FILTER PLANTS AND ESR

OF JAMNAGAR MUNICIPAL CORPORATION, DISTRICT: JAMNAGAR, GUJARAT

SCHEDULE-B2 - ELECTRICAL WORKS

No Item Description Qty. Unit Amount in Rs.

amendment including first fill of transformer oil & following accessories.

(a) Oil conservator with filling holes with cap and prismatic oil level gauge.

(b) Silica Gel dehydrating breather charged with silica gel

(c) Oil drain cum sampling valve with plug

(d) Oil filter valve

(e) Lifting Eyes / Hooks / Lugs

(f) Two earthing terminal

(g) Diagram and rating plate

(h) Air release plug

(i) Explosion vent with diaphragm

(j) Thermometer pocket

(k) Four bi-directional plain roller with base channel with hauling holes(l)

Fixed / Separate type radiator banks(m) Off circuit externally operated 2.00 No. 1044414.00

tapping switch (For rating < 1000 kVA)(n) 100 mm stem type oil temperature

indicator (For rating < 500 kVA)(o) Bucholtz relay with shut off valve (For

rating ≥ 500 KVA)(p) 150 mm dial type oil temperature indicator with Alarm /

Trip contact (For rating ≥ 500 kVA)(q) 150 mm dial type winding temperature

indicator with Alarm / Tip contact (For rating ≥ 1000 kVA)(r) Marshalling

box(s) Neutral Terminal for seperate Earthing(t) 150 mm dia. magnetic type

oil gauge (For rating ≥ 1600 kVA)(u) Inspection cover & Jacking lugs (For

rating ≥ 1600 kVA)For transformer having oil storage capacity for 2000 liters

and higher, nitrogen injection fire protection system (NIFPS) is to be

630 KVA with Efficiency Level 2 (Soleriam ESR + Gyanganga Filter plant)

With off circuit tap changer +10% to -10% in steps of 2.5%

2.1 315 KVA with Efficiency Level 2 (Khijadiya WTP) 1.00 No. 729389.00

With off circuit tap changer +10% to -10% in steps of 2.5%

Jamnagar Municipal Corporation

JAMNAGAR WATER SUPPLY WORKS VOL-III PRICE BID

NAME OF WORK: BID DOCUMENT FOR THE WORK OF DESIGN, SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF

PUMPING MACHINERY, CONTROL PANELS AND ELECTRICAL WORKS AT VARIOUS HEADWORKS, FILTER PLANTS AND ESR

OF JAMNAGAR MUNICIPAL CORPORATION, DISTRICT: JAMNAGAR, GUJARAT

SCHEDULE-B2 - ELECTRICAL WORKS

No Item Description Qty. Unit Amount in Rs.

2.1.1 Casting of transformer plinth / foundation including oil soak pit (where

required) in situ reinforced cement concrete in M 20 using granite, quartzite

trap metal of size 6 mm to 20 mm for RCC work including providing of

grade cement & Fe 415 grade TMT bars,scaffolding, centering, form work, 2.00 No. 35000.00

curing etc. complete.

RCC plinth / foundation for transformer of capacity >315 & ≤ 630 KVA.

(LXWXH) 1500x1500x1500

2.1.2 Supply and levelling of Switchyard & transformer yard using gravel, fine sand

and other required filing material, enmarked for the Switchyard & Transformer

yard including removing of trees or boulders etc. if any. The general level of 25.00 sq.mtr. 400.00

the yard shall be at a convenient level for movement of man and material and

it should match with FGL and as per Specification and Drg.

2.1.3 Supply and Installation of GI Chain link fencing frames with L angle/Channel

post around Switchyard & Transformer yard etc. as per Specification and 36.00 Rmt. 1250.00

SITC of 3.0 mtr wide gate with GI chain link as per Specification and Drg. 2.00 No. 12500.00

Jamnagar Municipal Corporation

JAMNAGAR WATER SUPPLY WORKS VOL-III PRICE BID

NAME OF WORK: BID DOCUMENT FOR THE WORK OF DESIGN, SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF

PUMPING MACHINERY, CONTROL PANELS AND ELECTRICAL WORKS AT VARIOUS HEADWORKS, FILTER PLANTS AND ESR

OF JAMNAGAR MUNICIPAL CORPORATION, DISTRICT: JAMNAGAR, GUJARAT

SCHEDULE-B2 - ELECTRICAL WORKS

No Item Description Qty. Unit Amount in Rs.

3.0 SOFT STARTER PANEL

SITC of SS Panel Totally Enclosed, Floor / stand mounted, dust & vermin

proof, indoor type, minimum degree of protection - IP 42 or better as per IS:

2147, operation on 3-Phase, 4 Wire, 415V, 50Hz, Neutral effectively

grounded, with instrumentation compartments accomodating LED type

indicating lamps, control contactors as per IS: 13947, CT of accuracy class-

as per IS: 2705, relays, meters & control MCBs, air insulated electrolitic

grade AL bus bar for three phase & neutral system with incomming breaker-

microprocessor based Air Circuit Breakers (electrically operated drawout

type)/ MP MCCB with trip free mechanism, current limiting type as per IS:

8828, Motor Contractor (as per type -2 coordination), momentary contact type

push buttons, equipment fittings, bus bars, cable gland, incoming & outgoing

cable connection for 1100V grade, Aluminium/ Copper conductor XLPE /

PVC insulated & PVC sheathed armoured cable, 10% spare terminals, power

wiring using 1100V grade, FRLS insulated copper conductor wires

conforming to IS: 694 & 8130, cable compartments / alleys of minimum

mm size, GI / Al earth bus bar for entire length. panel shall be fabricated from

cold rolled, cooled annealed (CRCA) sheet steel & minimum thickness of

various members shall be as follows:

Base Frame / Channel / Gland Plate: 3 mm, Load Bearing Members / Doors:

2 mm and Internal Partitions: 1.6 mm.

Minimum Requirement for different rating of Soft Starter Panel:

SS with Internal / External by pass contactor, Door Mounted Display, Line

Contactor, TM MCCB/MDO ACB, Semiconductor Fuses, cast resin type CT

Cl-1.0, Digital MFM, 415V/230V AC Constant voltage/control transformer min

250VA, ,A/M switch, Indicating Lamps, Start Stop Push Button,Exhaust Fan,

Digital Ammeter & minimum 10 Channel Temperature Scanner.

1. The Soft starter rating shall be selected considering Ambient Temperature

at 50C or minimum 120% of the full load rated current of the motor name

plate Whichever is higher. Soft Starter selection calculation shall be

submitted for approval before procurement.

Jamnagar Municipal Corporation

JAMNAGAR WATER SUPPLY WORKS VOL-III PRICE BID

NAME OF WORK: BID DOCUMENT FOR THE WORK OF DESIGN, SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF

PUMPING MACHINERY, CONTROL PANELS AND ELECTRICAL WORKS AT VARIOUS HEADWORKS, FILTER PLANTS AND ESR

OF JAMNAGAR MUNICIPAL CORPORATION, DISTRICT: JAMNAGAR, GUJARAT

SCHEDULE-B2 - ELECTRICAL WORKS

No Item Description Qty. Unit Amount in Rs.

200 HP Microprocessor based Soft Starter - (Und Dam+Additional

with 75 KVAr Fixed Type MPP Type Heavy duty capacitor shall be

considered to improve PF with aceesories like A/M switch, Pushbutton,

Indication lamp, Capacitor Duty contactor, On delay Timer shall be

considered as part of the panel.

180 HP Microprocessor based Soft Starter - (Gulabnagar ESR) with

KVAr Fixed Type MPP Type Heavy duty capacitor shall be considered to

improve PF with aceesories like A/M switch, Pushbutton, Indication lamp, 1.00 Nos. 425000.00

Capacitor Duty contactor, On delay Timer shall be considered as part of the

150 HP Microprocessor based Soft Starter - (Patel Park ESR+Solarium

ESR+ Additional Starter)

with 50 KVAr Fixed Type MPP Type Heavy duty capacitor shall be 5.00 Nos. 410000.00

considered to improve PF with aceesories like A/M switch, Pushbutton,

Indication lamp, Capacitor Duty contactor, On delay Timer shall be

considered as part of the panel.

130 HP Microprocessor based Soft Starter - (Sasoi Dam)

with 40 KVAr Fixed Type MPP Type Heavy duty capacitor shall be

considered to improve PF with aceesories like A/M switch, Pushbutton, 2.00 Nos. 398000.00

Indication lamp, Capacitor Duty contactor, On delay Timer shall be

considered as part of the panel.

120 HP Microprocessor based Soft Starter - (Ranjitnagar ESR+

with 40 KVAr Fixed Type MPP Type Heavy duty capacitor shall be 2.00 Nos. 398000.00

considered to improve PF with aceesories like A/M switch, Pushbutton,

Indication lamp, Capacitor Duty contactor, On delay Timer shall be

considered as part of the panel.

Jamnagar Municipal Corporation

JAMNAGAR WATER SUPPLY WORKS VOL-III PRICE BID

NAME OF WORK: BID DOCUMENT FOR THE WORK OF DESIGN, SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF

PUMPING MACHINERY, CONTROL PANELS AND ELECTRICAL WORKS AT VARIOUS HEADWORKS, FILTER PLANTS AND ESR

OF JAMNAGAR MUNICIPAL CORPORATION, DISTRICT: JAMNAGAR, GUJARAT

SCHEDULE-B2 - ELECTRICAL WORKS

No Item Description Qty. Unit Amount in Rs.

3.5 100 HP Microprocessor based Soft Starter - (Khijadiya ESR+Patelpark

ESR +Additional Starter)

with 35 KVAr Fixed Type MPP Type Heavy duty capacitor shall be

considered to improve PF with aceesories like A/M switch, Pushbutton,

Indication lamp, Capacitor Duty contactor, On delay Timer shall be

considered as part of the panel.

75 HP Microprocessor based Soft Starter - (Bedi ESR+Navagam

ESR+Gokulnagar ESR+Ravi park ESR+Mahaprabhuji ESR)

with 25 KVAr Fixed Type MPP Type Heavy duty capacitor shall be 9.00 Nos. 268000.00

considered to improve PF with aceesories like A/M switch, Pushbutton,

Indication lamp, Capacitor Duty contactor, On delay Timer shall be

considered as part of the panel.

55 HP Microprocessor based Soft Starter - (Gyanganaga ESR)

with 20 KVAr Fixed Type MPP Type Heavy duty capacitor shall be

considered to improve PF with aceesories like A/M switch, Pushbutton,

Indication lamp, Capacitor Duty contactor, On delay Timer shall be

considered as part of the panel.

Jamnagar Municipal Corporation

JAMNAGAR WATER SUPPLY WORKS VOL-III PRICE BID

NAME OF WORK: BID DOCUMENT FOR THE WORK OF DESIGN, SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF

PUMPING MACHINERY, CONTROL PANELS AND ELECTRICAL WORKS AT VARIOUS HEADWORKS, FILTER PLANTS AND ESR

OF JAMNAGAR MUNICIPAL CORPORATION, DISTRICT: JAMNAGAR, GUJARAT

SCHEDULE-B2 - ELECTRICAL WORKS

No Item Description Qty. Unit Amount in Rs.

4.0 SITC of 125 KVAR APFC PANEL Totally enclosed, Compartmentalized,

Floor / Stand mounted, Dust & Vermin proof, Indoor type, fabricated from

CRCA sheet steel with minimum thickness of 3 mm for base frame/ channel/

gland plates, 2.0 mm for load bearing members/ doors & 1.6 mm for internal

partitions minimum degree of protection - IP 42 or better as per IS:

suitable for operation on 3-Phase, 4 Wire, 415V, 50Hz, Neutral effectively

grounded, with instrumentation compartments accomodating meters, aux /

protective relays, LED type indicating lamps & control MCBs as per

IS:13947, current & voltage transformers as per IS: 2705, air insulated

electrolitic grade Al. busbar for three phase & neutral system, GI earth bus for

entire length, power/ control wiring using 1100V grade, FRLS insulated

copper conductor wires conforming to IS: 694 & 8130, equipment fittings,

horizontally running busbar compartment height of minimum 300 mm,

incoming & outgoing cable connections for 1100V grade, Aluminium/ Copper

conductor XLPE/ PVC insulated & PVC sheathed armoured cable complete

in all respects as per Tender SLD / Specification / IS and including following 2.00 No. 253954.00

1.1 250A, TPN, 50 KA TM MCCB with Digital Voltmeter with VSS, Digital

Ammeter with ASS, Resin Cast CT- Cl : 0.5,10VA, A/M switch, Indicating

lamps, Push buttons etc.

1.2 Microprocessor based APFC Relay,96 / 144sq.mm, 8 STEP with RS

with minimum operating current 10mA.

2. OUTGOING CAPACITOR FEEDER:

Capacitor feeder of following rating comprising of TP MCCB/MCB, Capacitor

duty contactor, 415V Heavy duty MPP type capacitor banks, A/M Switch, ON

Delay timer,ON / OFF Push button, ON Indication lamp etc. as per Tender

SLD & Specification.2.1 25 KVAR FEEDER: 4 Nos.2.2 10 KVAR FEEDER:

2 Nos.2.3 5 KVAR FEEDER: 1 Nos.2.4 VACANT FEEDER : 1 Nos.NOTE:

1. Heavy duty 8" cooling/exhaust fan : 2 nos Minimum or higher as required

at the top of the panel with canopy/hood or as per OEM Design.

Jamnagar Municipal Corporation

JAMNAGAR WATER SUPPLY WORKS VOL-III PRICE BID

NAME OF WORK: BID DOCUMENT FOR THE WORK OF DESIGN, SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF

PUMPING MACHINERY, CONTROL PANELS AND ELECTRICAL WORKS AT VARIOUS HEADWORKS, FILTER PLANTS AND ESR

OF JAMNAGAR MUNICIPAL CORPORATION, DISTRICT: JAMNAGAR, GUJARAT

SCHEDULE-B2 - ELECTRICAL WORKS

No Item Description Qty. Unit Amount in Rs.

4.1 SITC of Lighting Distribution Board (LDB) as under:SITC of 3 Phase

Wire 4P, double door Prewired LDB each for Indoor Lighting & Outdoor

Lighting Suitable to house :Incoming: 40A FP, MCB (30mA)Outgoing: 32A

DP ELMCB (3 nos)20A SP MCB (6 nos.) & 16A SP MCB (6 nos.)

4.2 Outdoor Cable Junction Box

SITC of Outdoor Cable Junction Box, stand mounted, dust & vermin proof,

outdoor type, minimum degree of protection - IP 55 / 65 , Operation on 3-

Phase, 4 Wire, 415V, 50Hz, effectively grounded, with 400A TPN AL. busbar

considering current density 0.8A/sq.mm, busbar support, insulator, Terminal

arrangement, internal Control wiring & Terminal provision , LED Light etc. JB 18.00 Nos. 21000.00

shall be fabricated from cold rolled, cooled annealed (CRCA) sheet steel &

minimum thickness of various members shall be as follows:

Base Frame / Channel / Gland Plate: 3 mm, Load Bearing Members / Doors:

2 mm and Internal Partitions: 1.6 mm. Minimum JB Dimension (500 L x

W x 450 D mm) + Stand Height Min. 450mm shall be considered. JB

dimensions very as per site condition.

Jamnagar Municipal Corporation

JAMNAGAR WATER SUPPLY WORKS VOL-III PRICE BID

NAME OF WORK: BID DOCUMENT FOR THE WORK OF DESIGN, SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF

PUMPING MACHINERY, CONTROL PANELS AND ELECTRICAL WORKS AT VARIOUS HEADWORKS, FILTER PLANTS AND ESR

OF JAMNAGAR MUNICIPAL CORPORATION, DISTRICT: JAMNAGAR, GUJARAT

SCHEDULE-B2 - ELECTRICAL WORKS

No Item Description Qty. Unit Amount in Rs.

5.0 PMCC / LT PANEL

SITC of PMCC Panel Totally Enclosed, Compartmentalized ,Floor / stand

mounted, dust & vermin proof, indoor type, minimum degree of protection - IP

42 or better as per IS: 2147, operation on 3-Phase, 4 Wire, 415V, 50Hz,

Neutral effectively grounded, air insulated electrolitic grade AL bus bar for

three phase & neutral system with MP/TM MCCB with trip free mechanism,

current limiting type as per IS: 8828, momentary contact type push buttons,

equipment fittings, bus bars, cable gland, incoming & outgoing cable

connection for 1100V grade, Aluminium/ Copper conductor XLPE / PVC

insulated & PVC sheathed armoured cable, 10% spare terminals, power

wiring using 1100V grade, FRLS insulated copper conductor wires

conforming to IS: 694 & 8130, cable compartments / alleys of minimum

mm size, GI / Al earth bus bar for entire length. panel shall be fabricated from

cold rolled, cooled annealed (CRCA) sheet steel & minimum thickness of

various members shall be as follows:

Base Frame / Channel / Gland Plate: 3 mm, Load Bearing Members / Doors:

2 mm and Internal Partitions: 1.6 mm.

Minimum Requirement for PMCC Panel are as under

Jamnagar Municipal Corporation

JAMNAGAR WATER SUPPLY WORKS VOL-III PRICE BID

NAME OF WORK: BID DOCUMENT FOR THE WORK OF DESIGN, SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF

PUMPING MACHINERY, CONTROL PANELS AND ELECTRICAL WORKS AT VARIOUS HEADWORKS, FILTER PLANTS AND ESR

OF JAMNAGAR MUNICIPAL CORPORATION, DISTRICT: JAMNAGAR, GUJARAT

SCHEDULE-B2 - ELECTRICAL WORKS

No Item Description Qty. Unit Amount in Rs.

(1) TRANSFORMER INCOMER : 400A FP, 50 KA Microprocessor based

MCCB with Digital Voltmeter & Digital Ammeter, Resin Cast CT- Cl :

0.5,10VA, MFM Cl. 0.5, Indicating lamps, start stop Push buttons etc(1.1)

Surge protection device, 3P + N, Type 2 for lightning/surge protection. Load

sensing CT in Incomer for APFC panel , Control transformer min 500VA,

415V/230V AC or individual as per requirement, with 20A DP MCB & 20A

Power contactor.

(2) DG INCOMER : 400A FP, 50 KA Microprocessor based MCCB with

Digital Voltmeter & Digital Ammeter, Resin Cast CT- Cl : 0.5,10VA, MFM Cl.

0.5, Indicating lamps, start stop Push buttons etc. Electro-Mechanical

Interlock between Incomers shall be considered.

(3) SOFT STARTER POWER SUPPLY FEEDERS - 3 Nos. 1.00 Nos. 565000.00

Each feeder comprising of 150A FP, 50 KA Thermal Magnetic MCCB for

Motors with Indicating lamps, MFM with RS-485 etc.complete in all respects.

(4) SPARE POWER FEEDER: 1 No.

Each feeder comprising of 125A FP TM MCCB, 50kA with Indicating lamp,

etc.complete in all respects.

(5) 63A FP TM MCCB FEEDERS : 2 NOS.

(6) 63A TPN TM MCCB FEEDER FOR ALL MCB FEEDERS : 1 NO.

Outgoing:6.1) 2 Nos. 32A 'C' curve 4P MCB feeders ( 1 No. Indoor LDB,

No. for PLC Panel, 1 No. EOT Crane, 2 Nos. Spare feeders.

6.2) 3 Nos. 20A DP MCB feeders

Note : All TM MCCB shall be Considered with Adjustable Overload and SC

Jamnagar Municipal Corporation

JAMNAGAR WATER SUPPLY WORKS VOL-III PRICE BID

NAME OF WORK: BID DOCUMENT FOR THE WORK OF DESIGN, SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF

PUMPING MACHINERY, CONTROL PANELS AND ELECTRICAL WORKS AT VARIOUS HEADWORKS, FILTER PLANTS AND ESR

OF JAMNAGAR MUNICIPAL CORPORATION, DISTRICT: JAMNAGAR, GUJARAT

SCHEDULE-B2 - ELECTRICAL WORKS

No Item Description Qty. Unit Amount in Rs.

5.1 For Khijadia Filter Plant :

(1) TRANSFORMER INCOMER : 630A FP, 50 KA Microprocessor based

MCCB with Digital Voltmeter & Digital Ammeter, Resin Cast CT- Cl :

0.5,10VA, MFM Cl. 0.5, Indicating lamps, start stop Push buttons etc(1.1)

Surge protection device, 3P + N, Type 2 for lightning/surge protection. Load

sensing CT in Incomer for APFC panel , Control transformer min 500VA,

415V/230V AC or individual as per requirement, with 20A DP MCB & 20A

Power contactor.(2) DG INCOMER : 630A FP, 50 KA Microprocessor based

MCCB with Digital Voltmeter & Digital Ammeter, Resin Cast CT- Cl :

0.5,10VA, MFM Cl. 0.5, Indicating lamps, start stop Push buttons etc.

Electro-Mechanical Interlock between Incomers shall be considered.(3)

SOFT STARTER POWER SUPPLY FEEDERS - 6 Nos.Each feeder 1.00 Nos. 935000.00

comprising of 150A FP, 50 KA Thermal Magnetic MCCB for Motors with

Indicating lamps, MFM with RS-485 etc.complete in all respects.(4)

KVAR APFC POWER FEEDER: 1 No.Each feeder comprising of 250A TPN

TM MCCB, 50kA with with Digital Ammeter, ASS, CT, Indicating lamp,

etc.complete in all respects.(5) 63A FP TM MCCB FEEDERS : 4 NOS.(6)

63A TPN TM MCCB FEEDER FOR ALL MCB FEEDERS :

NO.Outgoing:6.1) 3 Nos. 32A 'C' curve 4P MCB feeders ( 1 No. Indoor LDB,

1 No. for PLC Panel, 1 No. EOT Crane, 2 Nos. Spare feeders. 6.2) 3 Nos.

20A DP MCB feedersNote : All TM MCCB shall be Considered with

Adjustable Overload and SC Protection

Jamnagar Municipal Corporation

JAMNAGAR WATER SUPPLY WORKS VOL-III PRICE BID

NAME OF WORK: BID DOCUMENT FOR THE WORK OF DESIGN, SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF

PUMPING MACHINERY, CONTROL PANELS AND ELECTRICAL WORKS AT VARIOUS HEADWORKS, FILTER PLANTS AND ESR

OF JAMNAGAR MUNICIPAL CORPORATION, DISTRICT: JAMNAGAR, GUJARAT

SCHEDULE-B2 - ELECTRICAL WORKS

No Item Description Qty. Unit Amount in Rs.

5.2 For NAVAGAM Pumping Station :

(1) TRANSFORMER INCOMER : 400A FP, 50 KA Microprocessor based

MCCB with Digital Voltmeter & Digital Ammeter, MFM Cl. 0.5 with RS-485

port,Resin Cast CT- Cl : 0.5,10VA, Indicating lamps etc.(1.1) Surge

protection device, 3P + N, Type 2 for lightning/surge protection. Load sensing

CT in Incomer for APFC panel , Control transformer min 500VA, 415V/230V

AC or individual as per requirement, with 20A DP MCB & 20A Power

(2) DG INCOMER : 400A FP, 50 KA Microprocessor based MCCB with

Digital Voltmeter & Digital Ammeter, MFM Cl. 0.5 with RS-485 port, Resin

Cast CT- Cl : 0.5,10VA,Indicating lamps, start stop Push buttons etc.

Electro-Mechanical Interlock between Incomers shall be considered.

(3) SOFT STARTER POWER FEEDERS - 3 Nos.

Each feeder comprising of 150A TPN, 50KA Thermal Magnetic MCCB for

Motors with Indicating lamps, MFM with RS-485 etc.complete in all respects.

(4) 125A FP TM MCCB FEEDERS : 1 No.

(5) 63A FP TM MCCB FEEDERS : 2 Nos.

(6) 63A FP TM MCCB FEEDER FOR ALL MCB FEEDERS : 1 No.

6.1) 3 Nos. 32A 'C' curve 4P MCB feeders ( 1 No. Indoor LDB, 1 No. for PLC

Panel, 1 No. EOT Crane, 2 Nos. Spare feeders.

6.2) 3 Nos. 20A DP MCB feeders

Note : All TM MCCB shall be Considered with Adjustable Overload and SC

Jamnagar Municipal Corporation

JAMNAGAR WATER SUPPLY WORKS VOL-III PRICE BID

NAME OF WORK: BID DOCUMENT FOR THE WORK OF DESIGN, SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF

PUMPING MACHINERY, CONTROL PANELS AND ELECTRICAL WORKS AT VARIOUS HEADWORKS, FILTER PLANTS AND ESR

OF JAMNAGAR MUNICIPAL CORPORATION, DISTRICT: JAMNAGAR, GUJARAT

SCHEDULE-B2 - ELECTRICAL WORKS

No Item Description Qty. Unit Amount in Rs.

For Mahaprabhuji Pumping Station :

(1) TRANSFORMER INCOMER : 400A FP, 50 KA Microprocessor based

MCCB with Digital Voltmeter & Digital Ammeter, MFM Cl. 0.5 with RS-485

port,Resin Cast CT- Cl : 0.5,10VA, Indicating lamps etc.(1.1) Surge

protection device, 3P + N, Type 2 for lightning/surge protection. Load sensing

CT in Incomer for APFC panel , Controlctransformer min 500VA, 415V/230V

AC or individual as per requirement, 20A DP MCB & 20A Power contactor.(2)

DG INCOMER : 400A FP, 50 KA Microprocessor based MCCB with Digital

Voltmeter & Digital Ammeter, MFM Cl. 0.5 with RS-485 port, Resin Cast CT-

Cl : 0.5,10VA,Indicating lamps, start stop Push buttons etc. Electro- 1.00 Nos. 805000.00

Mechanical Interlock between Incomers shall be considered.(3) SOFT

STARTER POWER FEEDERS - 4 Nos.Each feeder comprising of 150A TPN,

50KA Thermal Magnetic MCCB for Motors with Indicating lamps, MFM with

RS-485 etc.complete in all respects.(4) 125A FP TM MCCB FEEDERS :

No.(5) 63A FP TM MCCB FEEDERS : 2 Nos.(6) 63A FP TM MCCB FEEDER

FOR ALL MCB FEEDERS : 1 No.Outgoing:6.1) 3 Nos. 32A 'C' curve 4P MCB

feeders ( 1 No. Indoor LDB, 1 No. for PLC Panel, 1 No. EOT Crane, 2 Nos.

Spare feeders. 6.2) 3 Nos. 20A DP MCB feedersNote : All TM MCCB shall be

Considered with Adjustable Overload and SC Protection

Jamnagar Municipal Corporation

JAMNAGAR WATER SUPPLY WORKS VOL-III PRICE BID

NAME OF WORK: BID DOCUMENT FOR THE WORK OF DESIGN, SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF

PUMPING MACHINERY, CONTROL PANELS AND ELECTRICAL WORKS AT VARIOUS HEADWORKS, FILTER PLANTS AND ESR

OF JAMNAGAR MUNICIPAL CORPORATION, DISTRICT: JAMNAGAR, GUJARAT

SCHEDULE-B2 - ELECTRICAL WORKS

No Item Description Qty. Unit Amount in Rs.

5.4 For Und-1 Dam :

(1) TRANSFORMER INCOMER : 1250A FP, 50 KA Microprocessor based

ACB (LSIG) with Digital Voltmeter & Digital Ammeter, MFM Cl. 0.5 with RS-

485 port, Resin Cast CT- Cl : 0.5,10VA, Indicating lamps etc.(1.1) Surge

protection device, 3P + N, Type 2 for lightning/surge protection. 1.00 Nos. 565000.00

(2) OUTGOING : 400 KVA DG set Changeover switch - 2 Nos. : 630A FP,

Manual Change over switch, MFM Cl. 0.5 with RS-485 port, Resin Cast CT-

Cl : 0.5,10VA, Indicating lamps etc.

(3) 63A FP TM MCCB : 2 Nos. (SPARE)

5.5 Providing and erecting busbar chamber confirming to IS-375 fabricated from

16 G.M.S. sheet, dust & vermin proof having hinged door with rubber gasket

and necessary busbar supports with Aluminium busbar having current

density not more than 0.8 Amp. / sq.mm (Rated current / cross section area)

duly wrapped with colour insulation tape for phase sequence, three phase & 1.00 Rn.Mtr. 5696.00

neutral each Suitable for following current capacity with necessary painting

mounted on wall or pedestal frame of required size with necessary

(D) Suitable for 400 Amp. capacity

5.6 Approved make Four Pole LT Heavy Duty Switch Disconnector Fuse Unit

Cubical type for panel mounting / wall Mounting complete with operating

mechanism suitable to operate on 415V A.C. With HRC fuses of suitable load 3.00 No. 13001.00

confirming to IS. 13947 (Part I & III). of following capacities

Jamnagar Municipal Corporation

JAMNAGAR WATER SUPPLY WORKS VOL-III PRICE BID

NAME OF WORK: BID DOCUMENT FOR THE WORK OF DESIGN, SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF

PUMPING MACHINERY, CONTROL PANELS AND ELECTRICAL WORKS AT VARIOUS HEADWORKS, FILTER PLANTS AND ESR

OF JAMNAGAR MUNICIPAL CORPORATION, DISTRICT: JAMNAGAR, GUJARAT

SCHEDULE-B2 - ELECTRICAL WORKS

No Item Description Qty. Unit Amount in Rs.

6.0 LOW VOLTAGE (LT) CABLES

Supply, laying, testing & commissioning 1.1 kV grade, XLPE insulated,

stranded Aluminium/Cu. conductor, galvanised steel flat strip / round wire

armoured, extruded PVC type ST2 sheathed, heavy duty cable (to be laid on

wall surface with necessary clamps / in existing cable trench / cable trays /

conduit / pipe sleeves at road crossing or floor as per site requirement)

conforming to IS:7098 (Part-1) & IEC:60502 (Part-1) of following sizes

3.5 Core x 300 Sqmm A2XFY Cable ( 3 Runs - Trans. To PMCC Panel )

6.1 3.5 Core x 185 Sqmm A2XFY Cable ( PMCC to SS Panel & PMCC to

3.5 Core x 150 Sqmm A2XFY Cable 135.00 Mtrs. 504.00

3.5 Core x 95 Sqmm A2XFY Cable 340.00 Mtrs. 343.00

3.5 Core x 25 Sqmm A2XFY Cable 50.00 Mtrs. 134.00

4C x 2.5 sq. mm. 2XWY/2XFY(X) Cable ( For Elect. Crane) 50.00 Mtrs. 81.00

2C x 2.5 sq. mm. 2XWY/2XFY(X) Cable (For APFC CT) 110.00 Mtrs. 135.00

12C x 2.5 sq.mm 2XWY/2XFY ( Pump PMU Control cable ) 210.00 Mtrs. 450.00

4C x 70 sq.mm Cu. Armoured Cable 50.00 Mtrs. 1866.00

4C x 50 sq.mm Cu. Armoured Cable 50.00 Mtrs. 1308.00

4C x 35 sq.mm Cu. Armoured Cable 100.00 Mtrs. 959.00

Jamnagar Municipal Corporation

JAMNAGAR WATER SUPPLY WORKS VOL-III PRICE BID

NAME OF WORK: BID DOCUMENT FOR THE WORK OF DESIGN, SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF

PUMPING MACHINERY, CONTROL PANELS AND ELECTRICAL WORKS AT VARIOUS HEADWORKS, FILTER PLANTS AND ESR

OF JAMNAGAR MUNICIPAL CORPORATION, DISTRICT: JAMNAGAR, GUJARAT

SCHEDULE-B2 - ELECTRICAL WORKS

No Item Description Qty. Unit Amount in Rs.

4C x 25 sq.mm Cu. Armoured Cable 100.00 Mtrs. 693.00

7.0 CABLE END TERMINATION AND CONNECTION:

SITC of Double compression Ni-Plated brass cable glands and crimping type

Bimetallic lugs / sockets with necessary tools and equipments as specified in

specifications and IS. The glands and lugs / sockets shall be suitable for

cable size and type mentioned below & as per specifications.1) Earthing the

glands and armouring with earthing clamp and jumper and also connecting to

common earth bar.2) The job also includes, if necessary, supply & fixing of

extension busbar of same material on MCCB or panel board terminal /

connector to connect more than one no. of parallel cables or to connect

higher size cable to lower size unit. The job also includes earthing the glands

and armour of the cable with common earth bar or flexible copper mesh.

3.5 Core x 300 Sqmm A2XFY Cable ( 3 Runs - Trans. To PMCC Panel )

7.1 3.5 Core x 185 Sqmm A2XFY Cable ( PMCC to SS Panel & PMCC to

3.5 Core x 150 Sqmm A2XFY Cable 19.00 Nos. 504.00

3.5 Core x 95 Sqmm A2XFY Cable 34.00 Nos. 424.00

3.5 Core x 25 Sqmm A2XFY Cable 5.00 Nos. 214.00

4C x 2.5 sq. mm. 2XWY/2XFY(X) Cable ( For Elect. Crane) 2.00 Nos. 93.00

2C x 2.5 sq. mm. 2XWY/2XFY(X) Cable (For APFC CT) 8.00 Nos. 83.00

12C x 2.5 sq.mm 2XWY/2XFY ( Pump PMU Control cable ) 30.00 Nos. 182.00

Jamnagar Municipal Corporation

JAMNAGAR WATER SUPPLY WORKS VOL-III PRICE BID

NAME OF WORK: BID DOCUMENT FOR THE WORK OF DESIGN, SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF

PUMPING MACHINERY, CONTROL PANELS AND ELECTRICAL WORKS AT VARIOUS HEADWORKS, FILTER PLANTS AND ESR

OF JAMNAGAR MUNICIPAL CORPORATION, DISTRICT: JAMNAGAR, GUJARAT

SCHEDULE-B2 - ELECTRICAL WORKS

No Item Description Qty. Unit Amount in Rs.

Supply & laying GI perforated type cable trays with returned edge/ flange,

fabricated from 2.0 mm thk sheet steel in the standard length of 2.5 mtrs, duly

hot dipped galvanized after fabrication as per IS 2629-1989 / IS 4759-1984

including accessories such as coupler plates/ fish plates, bends,tees, 25.00 Rmt. 228.00

reducers, elbows, covers and electro-galvanized hardware etc, erected on

existing support as per specification and instruction of engineer in charge.

100(W) x 35(H) x 2.0 mm Thick

9.0 Making Trench/ excavation in soft soil of suitable width and of depth

(minimum 90cm depth (LT) & 1000mm for HT) for laying cable/ DWC pipe 270.00 Mtrs. 55.00

and back filling the same and making the surface as normal ground as per

Tender Specification Or EIC. (For laying of HT/LT cable)

9.1 Cable Protection/ Covering in Trench: Cable Covering with second class

bricks or cement tiles laid cover the cable (top) & also on both side with sand

bedding/cushioning of 75mm above and below cable.(16 bricks per meter.) 270.00 Mtrs. 139.00

as per Tender Specification. (For HT/LT cable protection ) complete in all

respects as instructed by EIC.

10.0 Supplying & fixing Steel Chequered Plate having 7 mm thickness,duly Sq.

painted with two coats of black Japan colour. (Average Wt. 61.1 kg/ Sq.Mtr.) Mtrs.

Jamnagar Municipal Corporation

JAMNAGAR WATER SUPPLY WORKS VOL-III PRICE BID

NAME OF WORK: BID DOCUMENT FOR THE WORK OF DESIGN, SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF

PUMPING MACHINERY, CONTROL PANELS AND ELECTRICAL WORKS AT VARIOUS HEADWORKS, FILTER PLANTS AND ESR

OF JAMNAGAR MUNICIPAL CORPORATION, DISTRICT: JAMNAGAR, GUJARAT

SCHEDULE-B2 - ELECTRICAL WORKS

No Item Description Qty. Unit Amount in Rs.

11.0 CHEMICAL EARTHING

SITC of Chemical earthing with earthpit of minimum bore dia. 225mm Safe

Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987

made of corrosion free G.I.Pipes having Outer pipe dia of 80 mm having 80-

200 Micron galvanising, Inner pipe dia of 40 mm having 200-250 Micron

galvanising, connection terminal dia of 14 mm with constant ohmic value

surrounded by highly conductive compound with high charge dissipation

suitable for following type of applications.

For Electrical installation up to 11 KV located in other than normal soil i.e.

Soft Rock, Marshy Soil etc.

-Length of Pipe : 2 mtrs.

-Back filling Compound :1 no. Bag of 25 Kg.

(2nos. for Tr. Body, 2 Nos.PMCC Panel, 2 nos. DP Structure, 2 Nos.all elect.

Equipments, 2 Nos. for SS Panel)

11.1 For Electrical Installation covering Transformer Neutrals, Lightning arrester

Earthing, Instrumentation (like PLC Panel, SCADA)i.e. independent Earthing

located in other than normal soil i.e.Soft Rock, Marshy Soil etc.

-Length of Pipe : 3 Mtrs.

-Back filling Compound :2 nos Bags of 25 Kg.

(2 nos. for Neutral of Tr.-1, 2 nos. LA of DP structure)

11.2 Providing one bag of 25 kg. Additional back filling compound (BFC) suitable 9.00 Nos. 700.00

for safe earthing device.

11.3 SITC of 50mm(w) x 6mm(T) etc. sizes as required, HOT dip galvanized GI

Strip including supply & fixing using GI spacers, saddles when laid inside the

building and inclusive of excavation & refilling of earth when laid outside the 1055.00 Kg. 77.00

building & interconnection with earth pit & all electro-mechanical

equipments.(50X6 G.I Strip wt.2.4 kg/m, 2.4x100Mt.=240kg.)

Jamnagar Municipal Corporation

JAMNAGAR WATER SUPPLY WORKS VOL-III PRICE BID

NAME OF WORK: BID DOCUMENT FOR THE WORK OF DESIGN, SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF

PUMPING MACHINERY, CONTROL PANELS AND ELECTRICAL WORKS AT VARIOUS HEADWORKS, FILTER PLANTS AND ESR

OF JAMNAGAR MUNICIPAL CORPORATION, DISTRICT: JAMNAGAR, GUJARAT

SCHEDULE-B2 - ELECTRICAL WORKS

No Item Description Qty. Unit Amount in Rs.

11.4 SITC of 25mm(w) x 6mm(T) etc. sizes as required, HOT dip galvanized GI

Strip including supply & fixing using GI spacers, saddles when laid inside the

building and inclusive of excavation & refilling of earth when laid outside the 225.00 Kg. 77.00

building & interconnection with earth pit & all electro-mechanical equipments.

(25X6 G.I Strip wt.1.2 kg/m, 1.2x50Mt.=60kg.)

11.5 Supply, laying and erection of 40mm(w) x 6mm(T) etc. sizes Copper Strip

including supply & fixing of bolts, saddles when laid inside the building and

inclusive of excavation & refilling of earth when laid outside the building &

interconnection with earth pit & Tr. neutral. (40X6 Cu. Strip, 1.88 Kg/m, 1.88 x 151.40 Kg. 787.00

30mtr.=56.4Kg.)Copper Bolt,Nuts ,Washers shall be used for Connecting

Earth electrode toindividual eqp. Bitumen shall be used at the place of

11.6 SITC of HOT Dip Galvanized iron strip wire 8 SWG (For LDB, LCS, etc.) 10.00 Kg. 77.00

(8 SWG G.I Strip, 0.103 Kg/m, 0.103 x 50Mt.=5 Kg.)

12.0 INTERNAL WIRING

SITC of Mains & outlet points wiring with 1.1 kV grade FRLS PVC insulated

ISI marked flexible stranded copper conductor wires with medium class min.

25mm. dia. Rigid PVC pipe and accessories to be erected concealed in / to

be run on surface / wall / ceiling with following sizes as mentioned below. The

unit rate wirings shall be with connector, PVC junction box, PVC Pipe, wires,

holder, ceiling rose, angle holder, switch, sockets, switch board, brass

chromium / cadmium plated machine screws, phase and neutral wires, green

Earth continuity wires etc. as required to complete wiring from LDB panel to

the final outlet termination points. The wiring shall be as per IS:732,

IS:4648 and as per tender specification / IS.

SITC of Mains wiring with 3 wire 1.5 sq.mm.

Jamnagar Municipal Corporation

JAMNAGAR WATER SUPPLY WORKS VOL-III PRICE BID

NAME OF WORK: BID DOCUMENT FOR THE WORK OF DESIGN, SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF

PUMPING MACHINERY, CONTROL PANELS AND ELECTRICAL WORKS AT VARIOUS HEADWORKS, FILTER PLANTS AND ESR

OF JAMNAGAR MUNICIPAL CORPORATION, DISTRICT: JAMNAGAR, GUJARAT

SCHEDULE-B2 - ELECTRICAL WORKS

No Item Description Qty. Unit Amount in Rs.

SITC of Mains wiring with 3 wire 2.5 sq.mm. 250.00 Mtr. 85.00

SITC of Mains wiring with 4 wire 1.5 sq.mm. 125.00 Mtr. 76.50

SITC of Mains wiring with 4 wire 2.5 sq.mm. 100.00 Mtr. 106.00

12.4 Point wiring for Light/ Bell with 2-1.5 sq. mm & earthwire of 1.5 sq.mm

(Green) both are of ISI marked 1.1kV grade FRLS PVC insulated multistrand

copper wires, in following type of pipe to be erected concealed in/ on surface

on wall/ ceiling complete with 6A Modular type switch/ bell push &

accessories and earth continuity of following type, erected on PVC/ Metallic

box, single mounting base frame covered with textured/ metallic front plate

modules erected on/ in wall/ ceiling as per pipe erected, with necessary Lamp

holder/ceiling rose/ H.D.Connector as directed.

(a) with medium class rigid PVC pipe and accessories erected flushed on

wall /Ceiling complete CATIII

12.5 Point wiring for Individual Plug with earthwire of 1.5 sq.mm (Green) both are

of ISI marked 1.1kV grade FRLS PVC insulated multistrand copper wires, in

following type of to be erected concealed in/ on surface of wall/ ceiling

complete with Modular type switch & 5 pin Plug erected on PVC/ Metallic box

covered with appropriate frontplate modules erected on/ in wall/ ceiling as per

pipe erected with following type of accessories.

For 6A Plug with 2-1.5 sq.mm Cu. Wire with medium class Rigid PVC pipe

and accessories (CATIII)

Jamnagar Municipal Corporation

JAMNAGAR WATER SUPPLY WORKS VOL-III PRICE BID

NAME OF WORK: BID DOCUMENT FOR THE WORK OF DESIGN, SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF

PUMPING MACHINERY, CONTROL PANELS AND ELECTRICAL WORKS AT VARIOUS HEADWORKS, FILTER PLANTS AND ESR

OF JAMNAGAR MUNICIPAL CORPORATION, DISTRICT: JAMNAGAR, GUJARAT

SCHEDULE-B2 - ELECTRICAL WORKS

No Item Description Qty. Unit Amount in Rs.

12.6 Point wiring for independent PLUG with following size mains & earthwire of

2.5 sq.mm (green) both are of ISI marked 1.1kV grade FRLS PVC insulated

multistrand copper wires, in following type of pipe to be erected concealed in

/flushed on wall/ ceiling, complete with ISI marked 3/5 Pin socket and tissino

type switch erected withearth continuity connection erected on Metal/ PVC

box covered with 3 mm thick PC (Polycarbonet)/ Acrylic sheet.

6/16A Plug with 2-4 sq.mm Cu. Mains with medium class Rigid PVC pipe

and accessories (CATIII)

12.7 SITC of Single Phase 20A 3 Pin Metal clad Industrial Type Socket with

plug top and 20A DPMCB, suitable for flush mounting, in 16 SWG MS box of

suitable size and covered with 3 mm thick electrical grade hylam sheet or

equivalent ISI marked Electrical grade Bakelite sheet and earthing with

sq.mm insulated copper wire run inside the conduit including interconnections

etc. complete as required.

12.8 SITC of Sheets steel powder coated weather proof enclosure with One no.

32A, 415V 4P MCB for Motor & Inductive load (C Curve) having 10 KA 1.00 Nos. 657.00

breaking capacity & confirms to IS:

Jamnagar Municipal Corporation

JAMNAGAR WATER SUPPLY WORKS VOL-III PRICE BID

NAME OF WORK: BID DOCUMENT FOR THE WORK OF DESIGN, SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF

PUMPING MACHINERY, CONTROL PANELS AND ELECTRICAL WORKS AT VARIOUS HEADWORKS, FILTER PLANTS AND ESR

OF JAMNAGAR MUNICIPAL CORPORATION, DISTRICT: JAMNAGAR, GUJARAT

SCHEDULE-B2 - ELECTRICAL WORKS

No Item Description Qty. Unit Amount in Rs.

LED LIGHT FIXTURES & LIGHTING:

SITC of Indoor wall mounting 20Watt or up to 25% higher wattage LED

feet Tube Light indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing used as a heat sink shall be

made of thick sheet Steel conforming to IS: 513/CRCA polyester powder

coated and high U.V. & corrosion resistance with diffuser and/or

Polycarbonate optics with company mark/name 20.00 Nos. 397.00

120 to 300 V,Power Factor more than 0.9, THD < 20 %,

CCT 4000 K to 6500K, Uniformity ratio >0.7,

Luminaries efficacy> 85 lumens/watt

LED driver efficiency > 85 %

(Each fitting required LM-79 & LM-80 Certificates)

Tube Light with integral / non-integral driver, Surge-4KV,IP-20, 4 feet, Cat-III

13.1 AREA Lighting (Flood LIGHT) :

SITC of 70W LED Wall mounted LED Flood Light fittings with High power

White LEDs wattage of 1Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and heat sink extruded

aluminium with diffuserand Polycarbonate optics/ lenses with company 22.00 Nos. 8305.00

mark/name engraved or embossed 120 to 300 V,Power Factor more than

0.95, THD < 20 %, CCT 5000 K to 5700K, Uniformity ratio >0.45, Luminaries

efficacy> 85 lumens/watt . LED driver efficiency > 85 %. ( Each fittings

required LM-79 & LM-80 certificates)

(IP-65), Surge -4KV Cat-III For Outdoor use

Jamnagar Municipal Corporation

JAMNAGAR WATER SUPPLY WORKS VOL-III PRICE BID

NAME OF WORK: BID DOCUMENT FOR THE WORK OF DESIGN, SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF

PUMPING MACHINERY, CONTROL PANELS AND ELECTRICAL WORKS AT VARIOUS HEADWORKS, FILTER PLANTS AND ESR

OF JAMNAGAR MUNICIPAL CORPORATION, DISTRICT: JAMNAGAR, GUJARAT

SCHEDULE-B2 - ELECTRICAL WORKS

No Item Description Qty. Unit Amount in Rs.

14.0 SAFETY ACCESSORIES

Supply & Erecting carbon dioxide (CO2) fire extinguisher of 6.5kg

capacity with necessary clamps made from 50 x 6 mm M.S. Flat with nut & 4.00 Nos. 8585.00

bolts grouted in wall complete. (for 1no. DP Structure, 2nos. X'mer-1 &

1no. HT Room, 1no. for LT Room cum pump house)

14.1 Supplying of standard first AID box with antiseptic cream, medicine for use

on wounds due burn, crepe bandage, guage bandage, medicated ready to

use bandage(Band-aid) adhesive tape for medicinal user, scissors, antiseptic

solution (Savlon or similar) etc.

Supply & fixing of printed Instruction (First Aid) Chart both in English and

Gujarati and duly framed with front glasses, for treatment of person suffering 4.00 Nos. 127.00

from electric shock.

Supplying & fixing of floor mounting stand for keeping four nos. of FIRE

buckets comprising 1500 mm in length, 900 mm height frame made out of

30mm X30mm X 4 mm angle iron with cross supports for legs, welded with 4 8.00 Nos. 932.00

hooks and duly painted with one coat of red lead and two coats of approved

enamelled silver paint.

Supply and laying of Synthetic Electrical Insulating Mat of (440V) Class - B /

min. thickness 2.5mm as per IS:15652/IEC61111 and with good electrical 47.00 Sq.Mtr. 763.00

insulation property as per site requirement. (for LT Panel)

Providing pair of rubber hand gloves ISI make suitable for working on 4.00 Nos. 212.00

11KV/22 KV supply

Jamnagar Municipal Corporation

JAMNAGAR WATER SUPPLY WORKS VOL-III PRICE BID

NAME OF WORK: BID DOCUMENT FOR THE WORK OF DESIGN, SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF

PUMPING MACHINERY, CONTROL PANELS AND ELECTRICAL WORKS AT VARIOUS HEADWORKS, FILTER PLANTS AND ESR

OF JAMNAGAR MUNICIPAL CORPORATION, DISTRICT: JAMNAGAR, GUJARAT

SCHEDULE-B2 - ELECTRICAL WORKS

No Item Description Qty. Unit Amount in Rs.

15.0 Dismentling work

Dismentling of Existing Pump sets with Motors & foundation and its allied

accessories like valves, EB, pipes and fitting and shifting to JMC store as per

EIC/ Site Engineer incharge instruction.

Jamnagar Municipal Corporation

JAMNAGAR WATER SUPPLY WORKS VOL-III PRICE BID

NAME OF WORK: BID DOCUMENT FOR THE WORK OF DESIGN, SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF

PUMPING MACHINERY, CONTROL PANELS AND ELECTRICAL WORKS AT VARIOUS HEADWORKS, FILTER PLANTS AND ESR

OF JAMNAGAR MUNICIPAL CORPORATION, DISTRICT: JAMNAGAR, GUJARAT

SCHEDULE-B2 - ELECTRICAL WORKS

No Item Description Qty. Unit Amount in Rs.

16.0 Diesel Generator Set : Supply, Installation, Testing and Commissioning of

"Silent Type" Diesel Generator set having Prime Power Rating as mentioned

below, 415 volts, 1500 RPM, 0.8 lagging power factor, suitable for 50 Hz -

phase system & 0.85 Load Factor and consisting of (A) Diesel Engine: Diesel

engine 4 stroke water cooled, electric start, of suitable BHP at 1500 RPM

suitable for above output of alternator at 40 Degree C, 50% RH & at

Meter MSL and conforming to BS 5514, BS 649, IS 10000, IS 8528, IS

capable of taking 10% over loading for one hour after 12 hours of continuous

operation with standard accessories like fly wheel, lubricating oil cooler,

Electronic Governor, lubricating oil filter, oil bath air filter, lubricating oil

pressure gauge, end exhaust manifold, standard set of tools with adjustable

spanners, screw drivers, feeder gauge, cylinder head to cover, joint cylinder

head to exhaust, element lube oil filter etc. (B) Engine Mounted Instrument

Panel fitted with and having Digital Display for (i) Start - Stop switch with Key,

(ii) Water Temperature Indicator, (iii) Lubrication oil pressure Indication, (iv)

Lubrication oil temperature Indication, (v) Battery Charging Indication, (vi)

RPM Indication, (vii) Over speed Indication, (viii) Low lube oil trip Indication,

(ix) Engine hours Indication, (x) All other sensors & indicator for critical

parameters.(C) Alternator : Synchronous alternator rated at prime power

rating of DG Set as mentioned below, 415 volts at 1500 RPM, 3 phase 50 Hz,

AC supply with 0.8 lagging power factor at 40 Degree C, 50% RH & at

Meter MSL. The alternator shall be having SPDP enclosure, brushless,

continuous duty, self-excited and self-regulated through AVR conforming to

IS: 4722/BS 2613 suitable for tropical conditions and with class- H Insulation.

(D) Base Frame & Foundation: Both the engine and alternator shall be

mounted on suitable base frame made of MS channel with necessary

reinforcement which shall be installed on suitable cement concrete

foundation and vibration isolation arrangement as per recommendations of

manufacturer.(E) Fuel Tank : Inbuilt fuel tank of capacity as mentioned below

as per OEM design (F) Exhaust System : Dry exhaust mainfold with

Residential heavy duty exhaust silencer. (G) Starting System : 12V/24V DC

starting system comprising of starter motors: voltage regulator and

arrangement for initial excitation complete with suitable Nos of batteries

required as per specifications. (H) Accoustic and weather proof enclosure

with arrangement for fresh air intake for cooling of the engine & alternator,

extraction, discharging hot air in to the atmosphere as per specifications.

Jamnagar Municipal Corporation

JAMNAGAR WATER SUPPLY WORKS VOL-III PRICE BID

NAME OF WORK: BID DOCUMENT FOR THE WORK OF DESIGN, SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF

PUMPING MACHINERY, CONTROL PANELS AND ELECTRICAL WORKS AT VARIOUS HEADWORKS, FILTER PLANTS AND ESR

OF JAMNAGAR MUNICIPAL CORPORATION, DISTRICT: JAMNAGAR, GUJARAT

SCHEDULE-B2 - ELECTRICAL WORKS

No Item Description Qty. Unit Amount in Rs.

Supply, Installation, Testing, Commissioning as per CPCB IV plus and its

Latest Amendment and Satisfactory testing as per requirement with first filling

of oil & DEF/ADblue topup as per site requirement etc.with guarantee of

complete system for Two years, with periodic maintanance and routine

services also obtaining all necessary registration certificate and NOC from

Electrical Inspector. The rate shall be inclusive of all required item/work as

per site requirement, tender specifications, and instruction of Engineer in

Charge for successful commissioning.

The Capacity and Ratings of DG sets : Prime Power rating of DG Set &

Alternator : 400 KVA (Samarpan Pumping Station)

16.1 Supply, Installation, Testing, Commissioning as per CPCB IV plus and its

Latest Amendment and Satisfactory testing as per requirement with first filling

of oil & DEF/ADblue topup as per site requirement etc.with guarantee of

complete system for Two years, with periodic maintanance and routine

services also obtaining all necessary registration certificate and NOC from

Electrical Inspector. The rate shall be inclusive of all required item/work as

per site requirement, tender specifications, and instruction of Engineer in

Charge for successful commissioning.

The Capacity and Ratings of DG sets : Prime Power rating of DG Set &

Alternator : 320 KVA (Gulabnagar + Khijadia WTP )

16.2 Supply, Installation, Testing, Commissioning as per CPCB IV plus and its

Latest Amendment and Satisfactory testing as per requirement with first filling

of oil & DEF/ADblue topup as per site requirement etc.with guarantee of

complete system for Two years, with periodic maintanance and routine

services also obtaining all necessary registration certificate and NOC from

Electrical Inspector. The rate shall be inclusive of all required item/work as

per site requirement, tender specifications, and instruction of Engineer in

Charge for successful commissioning. The Capacity and Ratings of DG sets

Jamnagar Municipal Corporation

JAMNAGAR WATER SUPPLY WORKS VOL-III PRICE BID

NAME OF WORK: BID DOCUMENT FOR THE WORK OF DESIGN, SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF

PUMPING MACHINERY, CONTROL PANELS AND ELECTRICAL WORKS AT VARIOUS HEADWORKS, FILTER PLANTS AND ESR

OF JAMNAGAR MUNICIPAL CORPORATION, DISTRICT: JAMNAGAR, GUJARAT

SCHEDULE-B2 - ELECTRICAL WORKS

No Item Description Qty. Unit Amount in Rs.

: Prime Power rating of DG Set & Alternator : 250 KVA (BEDI)

17.0 DG SET FOUNDATION : Construction of DG Set Foundation size as per DG

Manufactures recommendation and in brick or bela masonary, locally

available in C.M. 1:6 foundation concrete 150mm thick in C.C. 1:3:6 of trap

metal size 25 to 40 mm, inside cement plaster in C.M. 1:3 and cement plaster

outside in C.M.1:3 and top slab of RCC 1:1.5:3 slab 150 mm thick upto

Mtr. Height from GL, including complete civil work ,Reinforcement steel,

excavation and refilling with hard murrum with cast in situ RCC slab in one

single piece with 35 cm thick brick masonry wall in CM 1:6. Etc complete.

18.0 Providing corrugated G.I.sheet of ISI grade 0.60 mm thick roofing fixed with

galvanished iron J or L Hooks, Bolts and nuts 8mm diameter with bitumen

and G.I. limpet washer filled with white lead complete including the cost of

MS purlins (Min.50x50x2mm), Rafters (Min.100x50x3mm) and Trusses. 1135.00 Sq.Ft. 350.00

Vertical member shall be (Min.72x72x3mm). Scope also includes support

foundation and Two coat of Red oxide and black color to the structure.

Contractor has to approve design before installation. Shed height shall be

considered 5 Mtrs. or as EIC instruction.

19.0 LIASONING CHARGES FOR OBTAINING NOC

Power Liasoning Charges for obtaining N.O.C from Electrical Inspector &

Statutory authority for Power / Ele. Installation. (Fees shall be paid by

tenderer for obtaining N.O.C. from Electrical Inspector & Statutory authority

on behalf of client and shall be reimbursed on submission of original receipt

to Client). Liasoning Charges shall include preparing required attested

documents & drawing for obtaining NOC on behalf of client (Applicable Fees /

deposits shall be reimbursed by Client).

Total of Electrical Works

Jamnagar Municipal Corporation

JAMNAGAR WATER SUPPLY WORKS

VOL-III PRICE BID

SUMMARY (SCHEDULE-B)

Name of Work: Bid Document for the Work of Design, Supply, Installation, Testing and

Commissioning of Pumping Machinery, Control Panels and Electrical Works at various

Headworks, Filter plants and ESR of Jamnagar Municipal Corporation, District:

Jamnagar, Gujarat

SCHEDULE -B ABSTRACT

Sr. No. Name of work

Mechanical Work at 13 Headworks

Electrical Work at 13 Headworks

I/We are willing to carry out the above work at _____________ % Above /

Below, In words _______________________ Percent Above/ Below, for all tender

item rate which are mentioned above in schedule-B.

Contractor Sign

Executive Engineer

Jamnagar Municipal Corporation

Jamnagar municipal Corporation

JAMNAGAR WATER SUPPLY WORKS VOL-III PRICEBID

1. As mentioned in the Conditions of contract, the Contract being a lump sum type turnkey Contract

on EPC basis, the provision of measurement will be applicable only for the assessment of value

of work done for inclusion in any interim certificate for part payment to the Contractor.

2. The Schedule specifies the procedure for all such assessment of the items specified in Schedule

3. Each item of Schedule-B has been divided into broad components. The Employer's

Representative shall assess the value of each component as indicated in paragraph 6 herein

4. Percentages are indicated against each component of each items specified in Schedule B,

based on the Employer's best appreciation of the value of the component as related to the total

costs of the concerned item as whole. A head titled (any other item(s)) is included in each

breakdown of schedule and the tenderer shall at the time of tendering indicate any additional

items which he considers necessary but cannot be covered by any of the heads indicated in the

5. The percentage breakup as indicated in the Schedule may differ from that corresponding to the

tenderer’s scheme and design and he should take this into account while quoting his lump sum

prices for the items specified in Schedule-B.

6. The contractor shall, after approval of his detailed designs and drawings furnish to the

Employer's Representative an initial bill of quantities to all major items, to be reviewed and

updated periodically with the Employer's Representative. This bill of quantities will be used for

assessment of percentage progress of the component at any stage. By measurement jointly

taken by the Employer's Representative and the Contractor, mutually agreed and entered in the

measurement books in the form and by the method approved by the Employer's Representative,

and signed jointly by both the parties.

Jamnagar Municipal Corporation

JAMNAGAR WATER SUPPLY WORKS VOL-III PRICEBID

BREAK UP FOR INTERIM PAYMENTS

(MECHANICAL & ELECTRICALWORKS)

Percentage Payment to

item Description of Items

All Electro-mechanical, Valves, pipe works

and Instrumentation

a. On supply of material at work site in good condition 65% of Quoted rate

b. On erection of Equipment 25% of Quoted rate

On completion of Testing & Commissioning of

c. 5% of Quoted rate

d. Satisfactory running of system. 5% of Quoted rate

2 All other items

Running Bill as per unit and quoted rate as per

Jamnagar Municipal Corporation