Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.4 LAccepted-AOC 599 LANE NO 13 RAM NAGAR ROORKEE HARIDWAR UK | L1 | Accepted-AOC Awarded being L1 | |
| 2 | L2₹32.9 L+₹1.0 L (3.27%)Rejected-Finance D 502 SHIVILOK COLONY RAIPUR ROAD DEHRADUN | DEHRADUN | DEHRADUN | UTTARAKHAND | L2 | Rejected-Finance Rejected being not L1 | |
| 3 | L3₹33.9 L+₹2.0 L (6.42%)Rejected-Finance VILL BHANGERI PO ROORKEE PIN 247667 | HARIDWAR | UTTARAKHAND | 247667 | L3 | Rejected-Finance Rejected being not L1 | |
| 4 | L4₹34.2 L+₹2.3 L (7.31%)Rejected-Finance 11 CIVIL LINES ROORKEE 247667 DISTT HARDWAR UK | HARIDWAR | UTTARAKHAND | 247667 | L4 | Rejected-Finance Rejected being not L1 | |
| 5 | L5₹38.0 L+₹6.1 L (19.3%)Rejected-Finance | L5 | Rejected-Finance Rejected being not L1 |
Tender Value
₹48.8 L
EMD Value
₹97,520
Closing Date
27 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (MES) ROORKEE
Garrison Engineer Roorkee
SPL REPAIR TO MD ACCN BLDG NO 1 TO 6 (NCEs) OF GP HQ COY AT BEG AND CENTRE ROORKEE AND SPL REPAIR TO MD ACCN NO 651/11 AND 651/12 NEW RANGE LINE OF NO 1 TRG BN BEG AND CENTRE ROORKEE UNDER GE ROORKEE
2023_MES_635146_1
8392/342/E8
Open Tender
Civil Works
Item Rate
180 days
Roorkee
As per tender documents
8 documents required · 8 mandatory
₹500
GE (MES) ROORKEE
₹97,520
Yes
22 Feb 2024
30 Dec 2023
30 Jan 2024
30 Dec 2023
27 Jan 2024
13 Jan 2024
Amount
Demolition of cement concrete (reinforced) of any position not otherwise specifically provided for and including reinforcement required to facilitate demolition upto and including fourth story and on the roof top/mumty/parapet and removal of debris and rubbish out side MoD land complete all as specified and directed.
M&L for mild steel TMT bars of 10 mm dia and over cut to length bent to shape required including cranking, bending etc and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.
M&L for providing reinforced cement concrete (1:2:4) type B-1 using 20 mm graded crushed stone aggregate as in kitchen slab, complete all as specified and directed.
M&L for providing reinforced cement concrete (1:2:4) type B-1 using 20 mm graded crushed stone aggregate as in Chajjas complete all as specified and directed.
M&L for providing reinforced cement concrete (1:2:4) type B-1 using 20 mm graded crushed stone aggregate as in Beams, cantilevers,bressummers, lintels over 1.5m spancomplete all as specified and directed.
Form work to sides and soffits of shelves etc including supports such as kitchen shelves, platforms and similar works rough finish surface of concrete (the thickness of slab/shelves n.exc. 100 mm) complete all as specified and directed.
Formwork to chullah hoods, chajjas, troughs and similar items including edges
Demolition of cement concrete (un-reinforced) in Ground floors and paving n.exe 15cm thickness ( below or above ground level ) including removal of rubbish out side complex (MOD land), complete all as specified and directed.
M&L 75mm thick cement concrete 1:3:6 type C2 (using 40mm graded stone agg). Plinth protection laid to a slope of 1 in 24 in alternate basis system. Each bay shall not exceed 3m in length. 12mm wide & 75mm deep joint shall be formed between the bays which shall be filled with mastic filling to full depth comprising a mixture of 1 part of hot blow bitumen 85/25 portion and two parts of heated badrapur sand (by volume) etc complete all as specified and directed.
M&L for 75mm thick cement concrete (1:4:8)type D-2,using 40mm graded stone aggregate as in sub base complete all as specified and directed.
M&L for PCC (1:2:4) Ty B-0 using 12.5mm thick course aggregate as in cills, steps, parapets,, copings,Roof levelling and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.
M&L for 25mm thick PCC (1:2:4) ty B-1 using 20mm graded stone aggregates as in levelling course below floor tiles in bathroom and WC complete all as specified and directed.
Demolition of brick work built in cement mortar in any description and position complete all as specified and directed.
M & L brick work with sub class "B" bricks straight or curved on plan exc 6 m mean radis built in CM 1:6 complete all as specified and directed.
M&L for Brick work with sub clas "B" bricks straight or curved on plan to any radius in half brick thick wall built in CM 1:4 complete all as specified and directed.
Dismantling of Cast Iron pipe/PVC pipe up to 100 mm bore complete all as specified and directed.
Dismantling of Cast Iron pipe/ RCC drain pipe/PVC pipe up to 150 mm bore complete all as specified and directed.
S&F PVC (SWR) pipes of 110 mm nominal outside diameter (Type B with wall thickness 3.20 to 3.80 mm) single socketed in any length with rubber ring joints including all fittings/fixtures fixed on wall or in trenches or in floor complete all as specified and directed.
All as per item No. 18 above but 75mm nominal outside diameter complete all as specified and directed.
S& F PVC (SWR) vent cowl suitable for 75 mm pipe complete all as specified and directed.
S&F 110 mm bore PVC (SWR) bends/shoes any radius complete all as specified and directed
All as per item No. 21 above but 75 mm bore complete all as specified and directed.
S&F in repair PVC (SWR) floor trap/Nahani trap, 75mm dia plain including jointing with solvent cement with grating including jointing to waste pipe in cement concrete complete all as specified and directed.
S&F in repair PVC branch piece single (equal or unequal) 110 mm bore ordinary or inverted (spigot or socket type) or with parallel branches incl access door a complete all as specified and directed
S&F PVC (SWR) reducers 75mm dia, complete all as specified and directed.
S&F in repair 110 mm pipe stack clamps out of 50mmx 5 mm flat iron including bolts and nuts and securing ends of stays to walls or roof complete all as specified and directed.
All as per item No.26 above but 75 mm bore pipe complete all as specified and directed.
S&F PVC (SWR) junction, 110mm dia (Single T) or unequal provided with access door complete all as specified and directed.
S&F PVC (SWR) 75mm dia (Double T) or unequal provided with access door complete all as specified and directed.
Cutting into existing manholes for connecting new drains making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 or 3/4 section ) in cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate finished smooth and reforming benching as required for 100/150mm dia pipes complete all as specified and directed.
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) laid bedded and pointed in any mortar and removal of old tiles from premises complete all as specified and directed.
M&L Non - skid coloured ceramic glazed rectified tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, set and jointed in neat cement slurry and pointed in white or coloured cement over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed
M&L Coloured ceramic rectified tiles 300x600 x 7 to 8mm thick, as in vertical surfaces of wall such as dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement over and including 10mm thick rendering in CM 1:4 complete all as specified and directed.
S&F joint free non skid ceramic tiles coloured of 7 to 8 mm (squre/ rectungular ) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors set and jointed in neat cement slurry and pointed with white or coloured cement over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.
All as per item No 34 above but as in skirting over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.
M & L for 16-18 mm thick mirror polished Machine cut kota single piece stone slab of size 22''x22'' for flooring over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab laid over and including 15mm thick screed bed in CM 1:6
M&L kota stone mirror polished slab with uniform texture of 16-18 mm thick in trader of steps (to be flushed and provided with three Nos of grooves at the end on each step), riser of steps, skirting, dado and pillars in one single piece (size decided by Engineer-in-Charge) laid over and including cement screed 10mm thick in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing , bevelled edge of corner etc complete all as specified and directed.
M&L for 18 to 20 mm thick Udaipur green Stone factory made bull nosed, polished (table rubbed and polished) as in jambs, window cills, cooking platform and the like etc in cement mortar 1:4 including pointing in white cement (1:2) using marble dust and admixture of pigment to match with shade of stone including rubbing and polishing over and including 10 mm thick rendering in cement mortar 1:4 including rounding of edges, making hole for gas pipe complete all as specified and directed.
Material & labour for cleaning of concrete or plastered surfaces of roof and applying priming coat using with bituminous primer @ 0.30kg per Sqm followed evenly by a tack coat @ 1.20 kg per Sqm using 85/25 grade industrial hot blown bitumen , over it laid with 3mm thick APP modified polymeric water proofing membrane minimum weight 3.6 Kg per Sqm reinforced with non-woven polyester fabric (weight not less than 160 Gm per Sqm) unrolled & bonded to substrate with side and end laps 75mm & 100mm as per manufacturer’s instruction and applying over it a tack coat using 85/25 grade industrial hot blown bitumen @ 1.20 kg per Sqm and finally finished the top of polymeric water proofing membrane with a coat of bituminous aluminum paint @ 0.20 kg per Sqm as per manufacturer’s instructions over, complete all as specified & directed. (including removal of existing membrane and removal of scrape from site) Note: Ponding test shall be conducted as directed by Enbgineer-in-Charge for 3 days. and payment shall be made only after efective results. Contractor has to furnish guarantee for 10 Years and security deposit @ 2.5% shall be retained in Final Bill
Taking down chowkhat or frames exc. 1.5 Sqm and n.exc 4 Sqm each with shutters (without taking off shutters from frames) complete all as specified and directed.
Taking down chowkhat or frames not exc. 1.5 Sqm each with shutters (without taking off shutters from frames) complete all as specified and directed.
S&F Mild steel door frame by using M.S angle/flat iron including M.S butt hinges 100mm size, formial provision of double rebate to recive door shutter including necessary hold fast and pcc block in cement concrete 1:2:4 type B1 complete all as specified and directed.
S&F mild steel framed work such as grills, grating etc with ends of bars shouldered and or riveted or forged in spikes , framed guard bars, barred iron doors , ladders, framed balusters, railings and similar conforming to Fe-290Gde E-165 complete all as specified and directed.
S&F factory made steel shutter shall be made out of angle iron 35x35x5mm and 3 nos 25x25x3mm as cross support in frame of door and covered with 1.00mm thick MS sheet, running welding with frame, with locking arrangement including two coats of synthetic enamel paint over a coat of red oxide as shown on drawing complete all as specified and directed.
S&F 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
M&L for built in steel cup board with pressed steel frame of size 75 mmx45mmx1.25 mm th with pressed steel shutter 1mm th Godrej pattern fixed to masonry wall by hold fast made out of 25x3 mm flat iron including ms hanging rod of 10 mm dia with bracket fixed on inner side of one leaf of shutter and on other leaf provision of ms peg set of 3 pegs including spray including locking arrangement painting with two coats of synthetic enamel paint over one coat of red oxide primer with two coats of synthetic enamel paint over one coat of red oxide primer all around on steel surface of frame & shutter and making good disturbed portion in cm 1:3 or pcc 1:2:4 complete all as specified and directed.
S&F factory made gauged shutter shall be made out of angle iron 35x35x5mm (outer frame) and 25x25x5mm (middle rail 2 nos, 150 mm apart from each other) and 1.0mm thick steel sheet covering on middle rail, 10mm Square bars @ 100mm C/C fixed vertical as grill complete with stainless steel fly proof wire mesh having 0.63mm nominal dia wire and 1.4mm average with aperture, with locking arrangement including two coats of synthetic enamel paint over a coat of red oxide as shown on drawing complete all as specified and directed.
S&F Fiber glass reinforced plastic (FRP) Flush door in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF) polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameter of FRP, laminate confirming to table 3 of IS -14856 Complete all as specified by the manufacturer and as per direction of Engineer -in- charge.
S&F FRP door frames three legged of cross section 90x45mm having single rebate 32mmx15mm. The laminated door frame moulded with fire retardant grade unsaturated polyester resin and chopped mat. Door frame laminated shall be 2mm thick, frame shall be covered with fiber glass from all sides ms flat iron 25x3mm shall be provided at the bottom to steady the frame including PCC 1:2:4 Ty B0 using 12.5mm graded stone aggregate as in frame, complete all as specified and directed.
S&F 100 mm long (size) butt hinges, stainless steel AISI 304 grade with brass/bronze hinge pin, complete all as specified and directed.
S&F in repair Mild steel cold rolled butt hinges, medium weight, 100mm long, complete all as specified and directed.
S&F 300mm long, stainless steel of AISI 304 grade, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts complete all as specified and directed.
S&F Stainless steel of AISI-304 grade barrel tower bolt 200 mm long, extruded section complete all as specified and directed.
S&F Stainless steel of AISI-304 grade barrel tower bolt 150 mm long, extruded section complete all as specified and directed.
S&F Extruded aluminium alloy handles, fabricated type, anodised of size 150mm size long complete all as specified and directed.
S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor of 140mm long complete all as specified and directed.
M&L Preparation of new or previously untreated wood and wood based surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L Preparation of new or previously untreated steel and steel based surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L for powder coated aluminium anodised window sliding type (3 shutters type) with sash bars, aluminium sections weighing 0.55 Kg/m(min) including stainless steel wire mesh , necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws suitable anodised fittings such as, hinges, handles, locking arrangement including anodised aluminium frame, complete all as specified and directed.
M&L for powder coated (50 micron thick) aluminium ventilator fixed type (partly glazed and partly gauzed) with gasket, glazing clip etc, weight of frame not less than 0.55 Kg/RM and weight of shutter frame not less than 0.425 Kg/RM including necessary joining cleats,rubber packing, anodised aluminium snap beading, screws suitable anodised fittings such as, hinges, locking arrangement including S&F 3 to 4 mm thick pin headed glass complete all as specified and directed.
S&F stainless steel (grade-304) grills made of hollow tubes section including welding, grinding, buffing polishing and making curvatures wherever required and fitting the same with necessary holdfasts/ SS dash fastners with nut & bolts of required size, complete all as specified and directed.
S & F 18 mm thick with min density 600 Kg / Cum LEAD FREE PVC Celuka ply of both side plain white colour fixed with screws, solvent cement/ adhesive to make kitchen/bed rooms cabinet sides top and bottom and shelves inside the cabinets complete as per manufacturer’s specifications complete all as specified and directed.
S & F 18 mm thick with min density 600 Kg / cum LEAD FREE PVC Celuka ply of single side rigid laminate of approved color and other side plain white colour fixed with ss screws and solvent cement/ adhesive to make kitchen cabinet shutters complete as per manufacturer’s instructions complete all as specified and directed.
S & F 6 mm thick with min density 600 Kg / cum LEAD FREE PVC celuka ply fixed with ss screws and solvent cement / adhesive to make wall mount kitchen cabinet back sides complete as per manufacturer’s specifications complete all as specified and directed Make for item No. 62 to 64 Raj Shree Plastic wood /ECO cell
S&F Auto hinges for cabinet case (Make ; KARF / HETICH)
S&F 100 mm size stainless steel bright finish handle for cabinet shutter
Taking down cement plaster, terrazzo dado in any thickness from brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc including removal of rubbish, vegetation etc outside complex (MOD land) complete all as specified and directed.
M&L Rendering 5mm thick plastering in cement mortar 1:3 as in ceiling finished even and smooth without using extra cement to match with existing surface complete all as specified and directed.
M&L Rendering 12 mm thick in cement mortar 1:6 on fair face of brick work/ concrete surfaces (either surfaces) of wall and finished even and smooth without using extra cement complete all as specified and directed.
M&L Rendering 5 mm thick in cement mortar 1:4 over a layer of 10mm thick rendering in cement mortar 1:6 on fair face of brick work/ concrete surfaces of wall with water proofing admixture finished even and smooth without using extra cement complete all as specified and directed. (WPC will be measured and paid separatly)
Supply only liquid water proofing compound complete all as specified and directed.
Preparation of new plastered surface or old treated surface of wall by applying 2mm thick wall care putty and making the surface smooth and applying two coat of oil emulsion distemper using roller for painting complete all as specified & directed.
M& L preparing plastered new surfaces of ceiling and applying three coats of white wash on ceiling surface complete all as specified & directed.
All as ser item No.83 above but two coat on old ceiling surface complete all as specified & directed.
M&L Preparation of newly/old plastered surfaces of walls and applying two coats of colour wash on walls complete all as specified and directed.
Taking up or down 15 mm bore GI tubing and connections including cleaning for re-fixing complete all as specified and directed.
All as per item No. 76 above but 20 mm bore
S&F 15mm bore GI tubing medium grade with all fittings and fixed to wall and ceiling or laid in floors etc complete all as specified and directed.
All as per item No 78 above but 20 mm bore.
M&L for cutting chases on brick or concrete surface for concealed water tubing or girth n.exc 10cm including making good of disturbed surfaces with PCC 1:2:4 type B0 using 12.5 mm graded aggregate complete all as specified and directed.
Dismantling of RCC/ PVC water tanks exc 250 liters and n.exc 500 liters capacity of any condition or type complete all as specified and directed.
S&F white colour Rotational moulded polyethylene water storage tank 500 liters capacity, white triple layer construction (cylindrical vertical closed top), hoisted & fixed in position including all fittings complete all as specified and as directed.
S&F in repair Gun-metal globe or gate valves 20mm bore with iron wheel head, screwed both ends for iron complete all as specified and directed.
S&F 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gms) complete all as specified and directed.
S&F in repair vitreous chinaware coloured wash hand basin (WHB) size 550mm x 400mm, Ist quality, including provision of pair of mild steel angle iron brackets of suitable size duly painted and cutting for and pinning in ends of brackets in walls & making good & including providing and fixing of suitable heavy duty waste pipe and waste fitting complete all as specified and directed.
S&F in repairs PVC duel action symphonic action type flushing cistern 10 ltr capacity, low level, white with inlet, ball valve and float including brackets and flush pipe.
S&F in repair sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.
S&F in repair stainless steel sink AISI 316 grade without drainage board of 1 mm thick with plug , washer and waste, including bedding in cement mortar to dwarf wall or including CP Waste , PVC Down pipe etc and fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm or more complete all as specified & directed.
S&F in repair Chromium plated tubular towel rail, 25mm dia, ‘D’ type 60cm long between flanges of brass chromium plated and with hooks,brackets & End caps fixed with brass screws complete all as specified and directed .
S&F in repair Brass chromium plated shower rose 125mm size all as specified and directed
S&F in repair Stainless steel cromium plated Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.
S&F in repairs 15mm bore Pillar tap of Chromium plated high pressure screwed for iron pipe and fixed etc. complete all as specified and directed.
Supply and fix glass corner shelf fancy type made of 6 to 7 mm thick sheet glass of size 250mmx250mm fixed with chromium plated brackets complete all as specified and directed. Make : fortune or equivelent
S&F Stainless steel 4 shelf wall mounted kitchen utensils rack, Dish rack with plate,& cutlery stand of size 18x24 inches , fixed to wall plugs and chromium plated brass screws complete all as specified and directed.
S & F in repairs vitreous china wash down water closet pan (Pedestal pattern) white incl 'P' or 'S' trap (Make : Parryware/Hindware) and making good the disturbed surface to match with the existing complete all as specified and as directed.
S & F Magic eye piece to door shutter complete all as specified & directed.
S&F in repair stainless steel peg set of six complete all as specified and directed.
S&F in repair 15 mm dia stop cock/angle cock cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle,with long shank and cup (concealed type), flench screwed both ends for iron or for union.fixed in repair (make: Cera new cat no F2002201, Jaquar cat no CON-CHR-053 KN, Pearl cat no ARI-004 ) .
S&F in repair bib taps brass cromium plated 15 mm bore size screwed down screwed for iron pipe or for brass ferrule (make: Cera cat no F1015151, Jaquar cat nocontinental CON-CHR-047 KN, Pearl cat no ARI-003 )
S&F in repair Stainless steel grating 100mm dia of best quality as approved by GE including fixing in CM 1:4 to floor/nahani traps etc complete all as specified and directed.
S&F in repair PVC connection 15 mm bore and 45cm long with washers complete all as specified and directed.
S & F 25mm MS steel curtain rod covered with PVC coating with fancy type braket and end caps complete all as specified and directed.
25mm thick Factory made Flush shutters, solid core construction, with partical board core and plywood face panels, commercial type on both sides complete all as specified & directed.
S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flap 40mm complete all as specified & directed.
Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws, 100mm complete all as specified & directed.
M & L for cutting of bushes small trees (Peepal small plants etc) trunks shrubs of any dia and girth from roof projection, chajjas , wall junction parapet etc at any height by necessary demoliton of brick work etc if requried and making good distrubed surfaces to match with existing finihes with and incl material and labore in CM 1:4 mixed with WPC /PCC 1:3:6 type B0 /Bk work in CM 1:4 as required at site and as directed by Engr-in-Charge
Supply and fixing PVC heavy duty waste pipes of 40/32mm bore suitable for wash hand basins/sinks/flushing cistern complete all as specified & directed
M & L Hard core of broken bricks, broken to gauge n exc 63 mm complete all as specified & directed.
Supply and laying sand (25 mm thickness ) for cushioning to interlocking paver block complete all as specified and directed.
M&L for 60 mm thick Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of M-35 Grade made with grey cement and pigment complete all as specified and directed
S & F Health Faucet 8 mm dia 1.2 mtr long flexible tube & wall hook complete all as specified and directed (Model : ALD-573, Make : Jaguar OR EQUIVALENT RANGE OF MARC, JOHNSON).
Dismantling of floor of WC and bath not exc 500mm deep and removing out the cinder/concrete from sunken portion, cleaning of RCC surface to remove dust, loose particle with compressed air or any other suitable method depending on site conditions, grinding any sharp edges etc complete all as specified and directed. (b) Cleaning or RCC surface to remove dust, loose particle etc with compressed air or any other particles or any other suitable techniques on site conditions etc.(c) M&L for a glass fiber reinforced acrylic modified cementitious coating system with base coat @ 1.50 Kg/Sqm glass fiber reinforcement and top coat with Sika Top® Seal-107 @ 1.50 Kg/Sqm or equivalent of Fosroc or MC Bauchemie India Pvt Ltd.(d) M&L for protection plaster 15mm thick on cement mortar 1:3 admixed with appropriate integral water proofing compound with as specified.(e) M&L for providing 25mm dia GI pipe spout projecting at least 150mm beyond outer face of wall.(f) M&L for sunken portion filled with 40 mm graded brick bats and finished with 50 mm thick PCC 1:2:4 type B1 all as specified and directed.(g) The area of Each WC portion is n.exc 2.00 Sqm each.(h) Cost of the above aspect shall be deemed to be included in the quoted rates of the respective item and nothing extra shall be paid on this account.Note : The work will be executed by authorised manufacturers/applicator. Plan Area only be measured for payment purpose. Ponding test shall be conducted as directed by Enbgineer-in-Charge for 3 days. and payment shall be made only after efective results. Contractor has to furnish guarantee for 10 Years and security deposit @ 2.5% shall be retained in Final Bill
S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples, complete all as specified & directe
Dismantling of Brick tiles or terracing tiles, single layer on roofs, kerbs, aprons, etc. (each layer) and removal of rubbish out of defence land complete all as specified and directed.(Note : All roots of plant on either on wall or roof to be removed and making good the disturbed surfaces. The rate quoted be the contractor is deemed to be included in the unit rates.)
Demolition of Mud Phuska in roofs,any thickness including plastering and leeping of any thickness upto 30cm deep complete all as specified and directed.(Note: All roots of plant on either on wall or roof to be removed and making good the distributed surfaces. The rate quoted by the contractor is deemed to be included in the unit rates including removal of mud phuska outside defence land.)
M&L for screed bed 10 mm thick in CM 1:4 using coarse sand (mixed with WPC) on concrete surface of roof finished fair and even before application of APP of roof treatment complete all as specified and directed
M&L for 40mm thick brick tiles laid on cement mortar (1:6) and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement on mud phuska complete all as specified and directed.
All as per item 119 above but except tiles.
M&L for cleaning of concrete or plastered roof surfaces and applying priming coat using bituminous primer @ 0.30 kg per sqm followed evenly a tack coat @ 1.2 Kg per sqm using 85/25 grade industrial hot blown bitumen over it laid 3 mm thick APP modified polymeric water proofing membrane minimum weight 3.6 Kg per sqm reinforced with non-woven polyester fabric (weight not less than 160 gm per sqm) rolled & bonded to substrate with side and end laps 75mm & 100mm as per manufacturer's instruction and applying over it a tack coat using industrial hot blown bitumen 85/25 grade @ 1.20 Kg per sqm and finally finished the top of polymeric water proofing membrane complete all as specified and directed. (Note:- Dismantling & Romoval of existing old water prrofing menbrane deemed to be included in quoted rate of this item Ponding test shall be conducted as directed by Enbgineer-in-Charge for 3 days. and payment shall be made only after efective results. Contractor has to furnish guarantee for 10 Years and security deposit @ 2.5% shall be retained in Final Bill.
Dismantling structural steel work including doors, gates, railings etc, but excluding framed truss etc.
S&F Cast iron work grade FG 150, unmachined, in brackets, gully traps,gratings, railing, frames,manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops,parts of ranges, balusters and similar articles complete all as specified and directed
S&F steel windows with side hung shutters incl box type hinges with steel handles and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed
S&F steel windows with side hung shutters incl box type hinges with steel handles and steel peg stay complete without glazing bars dovetailed or welded complete all as specified and directed
S&F sheet glass 3 mm thick, ordinary quality and glazing with oil putty or wooden beads supplied with shutters in square n.exc. 0.5 sqm in each pane complete all as specified and directed
S&F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18mm and fixed with tied tacks or galvanised wire stapple etc to wooden/steel doors/windows incl wooden beeding/ putty complete all as specified and directed.
Hacking out old broken glass of any thickness/size or quality from wooden/metal frame fixed with putty/beading & S&F 3mm thick sheet glass, plain ordinary quality not exc 0.5sqm in each pane with and incl putty/beading complete all as specified.
Dismantling and taking down carefully U/S copper / aluminium point wiring (light, fan, socket, power) complete fitting such as switches, ceiling roses, pendants, lamp holder, light fitting etc including CI/Pressed steel terminals, switch box, and making good the disturbed surface of wall/floor etc, to match with the existing surfaces of wall/floor complete all as specified & directed.
Dismantling and taking down carefully sub-main wiring/service wire of any size including wooden batten etc and making good the disturbed surfaces of wall/floor to match with the existing wall/floor etc. complete all as specified
Dismantling and taking down carefully existing DB’s any type and making good the disturbed surfaces of wall/floor to match with the existing wall/floor etc. complete all as specified
Material and labour for point wiring with 1.5 sq mm PVC insulated, unsheathed, stranded copper conductor (FRLS) cable single core 1100 Volt grade in and including rigid PVC conduit medium grade 20mm dia or more ISI Marked concealed conduit and conduit accessories and cutting chases of suitable girth where required on brick/concrete surface & making good disturbed surface,provision of GI/Pressed steel terminal switch box with plastic laminated sheet 3 mm thick fixed with brass screw and washers along with 1.5 sq mm PVC insulated unsheathed stranded copper conductor cable ( FRLS ) as earth wire connected with main common earth dolly complete all as specified and directed for the following :- (a) One light/fan/bell/exhaust fan point controlled by one, one-way Piano type switch 5/6 Amp complete all specified and directed.
(b) One 3pin/5pin 5/6 Amps socket out let on same board controlled by one, one-way Piano type switch complete all specified and directed.
(c) One 3pin/5pin 5/6 Amps socket out let on independent board controlled by one, one-way Piano type switch complete all specified and directed .
(d) 'One light point controlled by two, two way piano switch 5/6 Amps complete all specified and directed.
All as per item No 132.01 here-in-before but wiring with 2.5 sqmm single core multi stranded copper condcutor 1100 V grade PVC insulated FRLS but unsheathed single core for 16 Amps power point on independent board and 2.5 sqmm FRLS cable as earthwire complete all specified and directed.
S&F switch piano flush type white finish 5/6 Amps, single pole one way , 230 volts, 50 hz complete all as specified & directed.
S &F socket out let 2 pin 5/6 Amps & 3 pin 5/6 Amps flush type, 230 volts, 50 hz all as specified and directed.
S&F switch piano flush type white finish 15/16 Amps single pole one way, 230 volts, 50 hz all as specified and directed
S &F socket out let 5 pin 15/16 Amps & 3 pin 5/6 Amps flush type, 230 volts, 50 hz all as specified and directed.
S&F switch piano flush type white finish 5 Amps, single pole two way, 230 volts, 50 hz complete all as specified & directed.
M&L bell push AC, SP 240 volts flush type 5/6 Amps, 230 volts, 50 hz complete all as specified and directed.
S&F bell ding dong elelctric 230V AC single pole all as speccified and directed.
S&F fan regulator , stepped type ,electronic (socket type),450 watt complete all as specified and directed.
Supply & fixing lamp holder (Angular/Straight ), insulated body, with back plate for batten fitting complete all as specified & directed.
S & F LED Bulb 9 Watt (cool day light) having colour temp 6500 K and lumen output 850 suitable for "B-22 type to fix on batten holder complete all as specified and directed.
M&L ceiling rose 3 terminal / PVC/ polycarbonate, isolated body all as speccified and directed
Supply and fix sheet metal enclosures with metal socket and plug top Single pole and neutral enclosure with a two pin and earth plug and socket complete ISI marked, 230/240 volts, 50 hz with one single pole MCB SP 25 Amps all as specified and directed.
Supply and fix in replacement of MCCB / MCB distribution board, Vertical TPN, 4 way, 415 V, 3 phase, AC with MCCB as incomer and MCBs as outgoing in sheet steel powder painted enclosure double door type with minimum IP 43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surface including taking down existing unserviceable MCB DB of any description complete all as specified and directed. Note: MCCB / MCBs shall be measured and paid separately.
Supply and fix in replacement of MCCB 100 Amp, 4 pole, 415 V, 50 Hz breaking capacity 25kA including taking down existing unserviceable MCCB of any description complete all as specified and directed.
Supply and fixing sheet metal enclosure double door type for MCBs DB SPN(Single pole and neutral) 240V AC 8 way with 200 Amps rated busbar all as specified and directed.
Supply & fixing MCB , SP, AC, 240 volts of 06 to 32 Amps capacity 10KA, 'B' series and making connections with suitable size of copper lugs complete all as specified & directed.
Supply & fixing MCB, SPN, AC, 240 volts of 40 Amps capacity 10KA, 'B' series and making connections with suitable size of copper lugs complete all as specified & directed.
S&F LED tube light batten 20 watts 4 ft extruded aluminium housing, translucent diffuser with LED light source , 2000 lumen, natural white ,surge protection range- 2KV, voltage protection range 120-280 VAC with intergrated driver and surge protection complete all as specified and directed.
S&F Decorative ultra slim round profile LED Tube light fitiing with extruded polycarbonate, energy efficient for mirror light 10 Watt 2 ft with LED light source with uniform light output, fixed on site with all accessories all as specified & directed.
Supply and fixing in replacement integral LED building security light luminaire comprising of pressure die cast aluminum housing heat resistant toughened glass with frame IP-65 protection road way luminaries with high power LED 25 watt with efficiency 100 lumen/watt at system level, CCT>5700K, with average life class 50,000 burning hours including GI brackete made out of 25 mm GI pipe medium grade and MS clamps for fixing of light fitting complete and connected with three core PVC insulated PVC sheathed copper flexible cable with existing point all as specified and directed.
Supply and fixing sub main wiring two single core 6 sq mm PVC insulated unsheathed stranded copper conductor cable ( FRLS ) 1100Volts grade drawn in & including rigid PVC conduit 25 mm dia or more medium grade concealed in wall along with 6.00 Sq mm PVC insulated unsheathed copper conductor cable (FRLS ) as earth wire and wire connected with main earth dolly including cutting chasing and making good disturbed portion all as specified and directed Note: Three run of 6sqmm cable and one run of PVC conduit shall be measured as one unit
Supply and fixing sub main wiring two single core 4 sq mm PVC insulated unsheathed stranded copper conductor cable ( FRLS ) 1100Volts grade drawn in & including rigid PVC conduit 20 mm dia or more medium grade concealed in wall along with 4 Sq mm PVC insulated unsheathed copper conductor cable (FRLS ) as earth wire and wire connected with main earth dolly including cutting chasing and making good disturbed portion all as specified and directed Note: Three run of 4 sqmm cable and one run of PVC conduit shall be measured as one unit
Taking down old unserviceable ceiling fan & Supply & fix ceiling fan 1200 mm sweep single phase 240 volts double ball bearing with down rod , canopy, blades etc BEE 3 star rated including connecting with twisted three core flexible copper conductor cable 0.5 sqmm from ceiling rose to connector of fan and writing MES No. on fan complete all as specified and directed. Note: Old Ceiling fan to be deposited in MES store Yard
S&F exhaust fan, steel body, 300mm, 900 RPM with louvers, single phase, 240V AC including necessary fittings and M&L for fixing arrangement on wall with frame holdfastener, bolt, washer, etc including connection with PVC insulated PVC sheathed copper cable of size 0.5 sqmm from ceiling rose to connector including finishing and making good as per existing surrounded wall complete all as specified and directed.
S&F PVC air ventilation (exhaust) fan, 250mm with louvers, single phase, 230V AC including necessary fittings and M&L for fixing arrangement on wall with frame hold fastener, bolt, washer, etc including connection with PVC insulated PVC sheathed copper cable of size 0.5 sqmm from ceiling rose to exhaust fan including finishing and making good as per existing surrounded wall complete all as specified and directed.
Supply and fix horizontal type electric water heater,storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated, ISI Marked, 240 V, 50 Hz complete with all accessories such as safety valve, thermostat, Plug top, NRV, Hot and cold water connection pipes all as specified and directed.
M & L for Circuit/submain wiring with single core 1.5 sq mm PVC insulated unsheathed stranded copper conductor cable ( FRLS ) 1100Volts grade drawn through existing rigid PVC conduit for Inverter wiring complete all as specified and directed.
Supply and fix electronic meters temper proof LCD display with polycarbonate cover 230 Volt , 10-60 Amp, single phase meter accuracy class-I 50Hz, conforming to IS13779, IP-54, with parameters to show data, time,current reading, load, PF, voltage and KWH all as specified and directed. Note: Old Electric Meter to be deposited in MES store Yard
Supply, Installed & fix maintenance free earthing copper bonded steel earth rod of 10 feet long having diameter of 17.2mm with copper bonding thickness of 250 micron,UL listed,CPRI Tested at 25 KA fault current for one second and is provided with universal clamp made of SS earth enhancing compound shall be of 30kg/pit(resistivity shall be less than 0.12 Ohm meter) tested as per IEC 62561-7.The above arrangements shall be provided with heavy duty earth poly plastic pit cover of 6000 kg load bearing capacity (Size:270 x 240 x 200mm) and FRLS insulated copper conductor of size 6 sqmm, single core cable drawn through and including suitable dia of medium grade GI pipe upto 7 mtr incl cutting and chases on wall and floor complete all as specified and directed. Note: The rate quoted above shall be deemed to be included for excavation and earth work, refilling, removal of surplus earth and making good the surface around chemical earthing.
Dismantling & taking out old unserviceable LT UG cable & Supplying, laying, jointing and testing LT underground cableof size 25 Sqmm 4 core, heavy duty, 1100 Volts, PVC insulated and sheathed, armoured with multi-stranded aluminium conductor cable conforming to latest IS , laid in trenches/ducts or fixed to poles/walls or laid under roads/paths/drains/culverts duly protected in galvanised steel pipe of suitable size all bare conductor of cable duly insulated 1.1 KV grade heat shrinkable sleeve including cable gland and lugging etc at both ends, including taking up of old existing cable, all complete all as specified and directed. Note : Excavation, earth work, cable sand cushioning & cable protection shall be measured separately under relevant items. Note;- The earth work shall be measured and paid sepretely under appropriate item of Sch A
Excavation in trenches in soft/disintegrated soil not exc 1.5 m wide and not exceeding 1.5m in depth for laying UG cable/foundation etc complete all as specified and directed.
Returning filling in soft/disintegrated soil including spreading levelling watering and well ramming in layers n.exc 25cm each layer complete all as specified and directed.
Removal of excavated surplus soft/disintegrated soil to a distance not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.
Material and labour for Double wall corrugated HDPE pipe, ISI marked of outer dia 50mm, inner dia 38mm with smooth internal and profiled external surface, non-pressure type, laid in trenches/floors/duct or fixed on walls /pole including all connections, accessories like socket, couplers, bends, etc for protection of LT cable XLPE grade 1100 volts complete all as specified and directed.
Labour and T&P for horizontal boring of hole passing through pavement/road/hardstanding by manual or mechanical means suitable for 50mm bore complete all as specified and directed
Supply and laid GI medium grade pipe for cable protection of size 40 mm dia complete all as specified and directed
Taking up or down galvanised steel tubing and connections of fany size and type compleate all as directed for following sizes :- (a)15mm bore
(b) 20mm bore
Supply and fix galvanised steel water tubing medium grade including all fittings such as bends, elbows, tees, reducers, sockets, union etc and laid in floor fixed on wall or ceiling complete all as specified and drected of the following bore. (a) 15 mm bore
(b) 20 mm bore
Supply and fix or lay in trenches galvanised steel water tubing medium grade including all fittings such as bends, elbows, tees, reducers, sockets, union etc and laid in trench complete all as specified and drected of size 20 mm bore
Drilling and tapping GI water mains 50mm bore (in position) for branch connections of the internal dia 20mm, complete all as specified and directed.
S&F straight plain brass ferrules (or connecting screws) screwed both ends and fixed to water mains for tapping branch connection of 20 mm bore pipe, complete all as specified and directed.
S&F gun metal globe or gate valves for 20mm nominal bore(Class-1) with iron wheel head ,srewed both ends for iron pipe ISI marked, complete all as specified and directed.
Supply fix and fabricate 18mm thick prelaminated Particle board , exterior grade, with screws & hinges to timber/wood/welded to angle iron frame for meter box , coloured and patteren as approved including hinge, locking arrangement and stainless steel bright finish handle complete all as specified and directed. Note. Area of Particle board only be measured for payment.
VINAYAK CONSTRUCTION COMPANY
AMAR NATH SHARMA
Alankar Traders
RAJENDER CONSTRUCTION CO
M/s MAA SHAKTI CONSTRUCTIONS AND SUPPLIERS
ANEJA AND COMPANY
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .