CA NO.CWE BLY/GE (E)/37 OF 2025- 2026SPECIAL REPAIRS TO BATHROOM, TOILETS AND GUARD ROOM (03 NOS) OF BLDG NO P-56 (GARUD HOUSE) OF HQ 6 MTN DIV UNDER GE (EAST) BAREILLY

Amount

Dismantling floor ,hearth or wall tiling including cement mortor bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Dismantling of stone slab and tiles of any description or thickness in floors, aprons etc tiles laid, beded and pointed in any mortar complete all as specified and as directed.

Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level)and removing the rubbish to a distance not exceeding 50 m from starting point complete all as specified and directed.

Taking down cement plaster of any thickness, raking out joints, hacking for key scrubbing down with water etc, removal of rubbish of the premises; removal and leaving the work clear for any type of plastering complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) n.exc. 1.5 sqm each complete all as specified and directed.

M&L for form work to sides and soffits for arches of floor or roof beams, beam haunchings, girders, bressummers,lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, of curved surface of concrete finished rough surface of concrete etc. complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directed.

M&L for mild steel TMT bars 6mm to 8 mm as in stirrups , spacers etc, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directed.

M&L for 75 mm thick cement concrete 1:4:8 type D2 (40 graded stone aggrigates) flooringas in sub bases, sub floors and pavings etc complete all as specified and directed.

M&L for full body matt finished vetrified tiles 8-9 mm thick dark shade/Double charged/ ultra charged square of size exc 0.36 sqm but n exc 1.00 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and Including 15mm thick cement screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for full body vetrified tiles 8-9 mm thick dark shade/ Double charged/ ultra charged square of size exc 0.36 sqm but n exc 1.00 sqm in vertical surface set and jointed in neat cement slurry and pointed in white or coloured cement to match with and Including 15mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for vetrified tiles 8-9 mm thick dark shade/ Double charged/ ultra charged square of size n exc 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and Including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for double charged vetrified tiles of superior quality 10 mm thick dark shade square or rectangular ) polished , area of each tile exc 0.42 sqm but nexc 1.0 sqm each tile , in floors etc set and jonted in neat cement slurry and pointed in white or coloured cement to match with and Including 15mm thick cement screed bed in cement mortar 1:6 etc. pattern and design as approved by GE or as per manufacturers catelouge and instruction complete all as specified and directed.

M&L for Granite 16 to 18 mm thick granite ( of any type) machine cut,in skirting , dado as instaircase riser and treads,landings, jambs soffits and cills of openings etc laid over cement screed and jointed with grey cement slurry and pointed with white cement and including 15 mm thick rendering of cement mortar 1:4 as backing coat with admixture of pigment to match the shade of granite stone including edge moulding and polishing complete all as specified and directed. (granite in jamb, stair /treads/riser shall be provided of best quality as approved and in single piece )

Taking down steel tubing of 15 mm dia bore and connections from walls and cellings or laid in floor including cleaning for refixing in same position (walls , ceiling, floors etc). complete all as specified and directed.

Taking down steel tubing of 20 mm dia bore and connections from walls and cellings or laid in floor including cleaning for refixing in same position (walls , ceiling, floors etc). complete all as specified and directed.

S&F for 20 mm dia CPVC pipe as SDR 11 and plain CPVC SDR 11 fittings on wall , floor , ceiling , concealed etc. with all fittings and fixtured , jonting solution of ISI mark including making grove in wall/ceiling and finished with cement mortor 1:4 with plumbing nails for securing pipes etc complete all as specified and directed.

S&F for 25 mm dia CPVC pipe as SDR 11 and plain CPVC SDR 11 fittings on wall , floor , ceiling , concealed etc with all fittings and fixtured , jonting solution of ISI mark including making grove in wall/ceiling and finished with cement mortor 1:4 with plumbing nails for securing pipes etc. complete all as specified and directed.

S&F in repair one piece EWC with built in twin Flushing fittings including close PP white seat cover of same make closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and flush pipe complete all as specified and directed.

S&F in repair viterous china wash hand basin of size 600 x 400 mm, snow white Counter top of thin rim table top wash basin café excluding taps, including brackets and CP waste fitting and 32 mm PVC waste pipe complete all as specified and directed.

S&F in repair viterous china wash hand basin of size470 x 470x 110 mm, white Counter top of oval shape of thin rim table top wash basin cafe excluding taps, including brackets and CP waste fitting and 32 mm PVC waste pipe complete all as specified and directed.

S&F in repair wall mixer cast copper alloy, chromium plated 3 in 1 system with provision for both over head shower and hand shower chromium plated, with wall flange, screwed down, for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair wash basin mixer cast copper alloy, chromium plated central hole without popup waste system with 450mm long copper pipe and brass nut complete all as specified and directed.

S&F in wash basin mixer cast copper alloy, chromium plated central hole single lever without popup waste system with 450mm long copper pipe and brass nut complete all as specified and directed.

S&F in repair toilet paper holder chromium plated fixed with CP screws complete all as specified and directed.

S&F in repair chromium plated connection 15mm size with PTMT nuts, of length 450mm complete all as specified and directed.

S&F in repair chromium plated connection 15mm size with PTMT nuts, of length 600mm complete all as specified and directed.

S&F in repair cast copper alloy CP angle valve type stop cock suitable for 15mm bore pipe screwed at both ends or high pressure with Capstan head confirming complete all as specified and directed.

S&F in repair bib taps of bore size 15mm, cast copper alloy, , chromium plated, fancy type, with crutch or butter fly handle screwed down , screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair Health Faucet with 8 mm dia one meter long flexible tube and wall hook chromium plated, screwed down, for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair two way bib cock cast copper alloy with wall fange , chromium plated complete all as specified and directed.

S&F in repair fancy type soap dish stainless steel as approved by GE complete all as specified and directed.

S&F in repair overhead shower 200x 200 mm square shape single flow (ABS body chrome plated with gray face plate ) with rubit cleaning system including swan neck extension piece etc complete all as specified and directed.

S&F shower panel minimum size 1500 x 200 mm etc complete includes Mixer, telephone shower, overhead shoer etc. complete all as specified and directed.

S&F in repair telephonic hand shower of 100mm dia including replacement of 1.5m long CP flexible tube with hanging hook complete all as specified and directed.

S&F Low density polyethylene pipes (LDPE) of pressure rating 6 kg/ cm2 of 40 mm dia bore for wash hand basin complete all as specified and directed.

S&F in repair CI floor trap 75 mm bore, plain with grating including jointing to waste pipe fixed with cement concrete B-1 (1:2:4) complete all as specified and directed.

S&F centrifugal spun pipe red in colour 75mm bore of pipe, single socket in any length with rubber ring joint, fixed to walls /Floor complete all as specified and directed.

S&F centrifugal spun pipe red in colour 100mm bore of pipe, single socket in any length with rubber ring joint, fixed to walls /Floor complete all as specified and directed.

S&F CI bends of (any radious) diminishing pieces or tapers (larger bore measured) 75 mm dia with access door complete all as specified and directed.

S&F CI bends of (any radious) diminishing pieces or tapers (larger bore measured) 100 mm dia with access door complete all as specified and directed.

S&F CI branch pieces, single (equal or unequal) or with parallel branches 75 mm dia complete all as specified and directed.

S&F CI branch pieces, single (equal or unequal) or with parallel branches 100 mm dia complete all as specified and directed.

S&F Bends (any radios) with duck s foot or heel rest of 75 mm dia complete all as specified and directed.

S&F Bends (any radios) with duck s foot or heel rest of 100 mm dia complete all as specified and directed.

S&F in repair Grating doom 125 mm dia with waste hole of stainless steel. complete all as specified and as directed by Engineer-In-Charge

S&F in repair 15 mm bore dia gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S&F in repair 15 mm bore dia gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S&F 20 mm bore dia ball brass valves, high pressure , with polyethene float and fly nut complete , screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S&F in repair glass mirror of size exc1.0 sqm but n exc 2.0 sqm including ornamnetal edges boreder on sides of 2 to 3 inch wide and mirrors having PVC/ply wood back of 6 mm thick including all fittings and fixtures required to fixing in ss brackets/ studs at all corners on walls etc, making holes if required complete all as specified and directed.

S&F in repair bottle trap of 32 mm dia bore to be fixed in below WHB of CP type incuding all fittings and fixtures etc complete all as specified and directed.

M&L for 15 mm thick cement plaster in CM 1:6 on brick surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15 mm thick cement plaster in CM 1:6 on ceiling rendering finished even and smooth without using extra cement etc. complete all as specified and directed.

S&F solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogeneous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing complete all as specified and directed. (Note:- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)

S&F factory made solid panel PVC Moulded door shutter 30 mm thick 2mm thick Prelam PVC sheet on the front face and 2mm thick Plain colour PVC sheet on back face with particle Board core complete all as specified and directed.

Demolition of brick work of stone/ boulder masonry, build in lime mortar/ cement moratr including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brick work with flyash old size bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed.

S&F 1000 Litre capacity Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) three layers hoisted of approved colour and fixed in position complete all as specified and directed.

S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F in repair SS Aldrop bolt 19mm dia & 250mm long with CP screw etc complete all as specified and directed.

S&F in repair SS tower bolt fixed to doors 150 mm long including CP screws etc. complete all as specified and directed.

S&F in repair SS handles fancy type 150 mm long fixed with SS screws etc. complete all as specified and directed.

S&F 100 mm SS butt hinges medium weight cold rolled fixed to doors with CP bolts etc. complete all as specified and directed.

S&F stainless steel towel rack 60 cm long and 20 mm diaand 45 cm in width complete all as specified and directed.

S&F ABS glass corner piece 12''x12'' with heavy wall brackets and ss railing fixed on wall with CP screws etc. complete all as specified and directed.

Taking down old unserviceable steel/ MS windows /ventilators of any type and size and remove to store carefully with shutters etc. complete all as specified and directed.

M&L for powder coated teak colour or any other similar colour as approved with anodized aluminium sliding window with anodized aluminium frame of size 92 mm x 32 mm x1.30 mm thick) of 3 Track with 1.3mm thick, with sliding shutters with necessary channels (top rail, bottom rail and style of size 40mmx 18mm x1.3 mm thick and locking clip in between two shutters ) including glazing with tinted sheet glass panel 4.00mm thick, fitted with necessary jointing cleats, glazing clips,locking device one for each shutter, rubber packing, aluminium beading, screws etc. complete all as specified and directed. Note: (i) powdercoated colour shall be approved by Engr in charge.(ii) if aluminium sections of window of above mentioned size not available in market then one size/thickness higher section will be provided by contrctor without any extra cost .

S&F in repair 12 mm thick toughned glass with itching with figured/ drawing making provision of hole for all ss glass fittings and fixing including SS patch fittings/ acceceries and hinges for single and double leaf in door complete all as specified and directed.

S&F double action floor spring hydraulically regulated made ISI marked of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F 18" long SS Handle heavy duty for door complete all as specified and directed.

M&L for SS lock for toughned glass but for single and double leaf shutter with tripple key etc. complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets etc complete all as specified and directed.

Dismantling Unframed work timber scantlings 40 sq. cm and over in section, in any position etc complete all as specified and directed.

S&F mild steel, rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 410 -W (Gde-E- 250) quality-A etc complete all as specified and directed.

M&L for pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified etc complete all as specified and directed.

M&L for pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified etc complete all as specified and directed.

M&L for reinforced cement concrete1:2:4 type B0 (using 12.5mm graded stone aggregate) (nominal mix) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc complete all as specified and directed.

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter etc of rough finished surfaces of concrete in Flat complete all as specified and directed.

M&L for two coats of synthetic enamel paint on steel surfaces over one coat of red oxide or zinc chrome primer, of any description over 10cm width or girth including preparation of new or previously untreated surfaces of steel etc complete all as specified and directed.

M&L for 15 mm thick rendering in CM 1:4 on brick surface finished even and smooth without using extra cement including in shafts, RCC chajjas, roof projections in four stories bldg in patches or as site requirements complete all as specified and directed.

M&L for preparation of new surface of walls and applying two coat of Oil bound distemper using roller, brushes including in patches over a coat of alkali resistant primer and including 1.50 mm thick cement based wall care putty in two layers with making the surface complete smooth by rubbing etc with minimum 6 hr interval between any two coats complete all as specified and directed.

M&L for preparation of new surface of walls by vacuume based sanding machine; scrapping down smoke soot, moulds, moss and efflorescent salts and greasy spots , removing nails etc, and applying Two coats of exterior Acrylic emulsion of any colour over one coat of exterior water based wall priming on walls with and including provision of scaffolding required for the treatment to external surfaces of building with required safety measures etc complete all as specified and directed.

M&L for complete removal of existing treatment from old brick on concrete surface on walls and applying two coat of oil bound distemper using roller, brushes including in patches over a coat of alkali resistant primer and including 1.50 mm thick cement based wall care putty in two layers with making the surface complete smooth by rubbing etc with minimum 6 hr interval between any two coats complete all as specified and directed.

M&L for complete removal of existing treatment on old surfaces by vacuume based sanding machine; scrapping down smoke soot, moulds, moss and efflorescent salts and greasy spots , removing nails etc, and applying Two coats of exterior Acrylic emulsion of any colour over one coat of exterior water based wall priming on walls with and including provision of scaffolding required for the treatment to external surfaces of building with required safety measures etc complete all as specified and directed.

Providing and fixing of false ceiling with powder coated exposed G.I. grid suspension system (E-Grid T-2430 or equivalent load carrying capacity with mid span deflection not exceeding 1/360 span with hanger spacing of 1200 mm c/c) consisting of Main Runner 3600/3000 mm long, Cross Tee 1200mm/600mm long and Wall Angle. The Wall Angle shall be fixed on PVC Dash Fasteners on the perimeter of the wall by steel screws with distance 300 mm c/c. The Main Runners to be placed @ 1200mm, The Cross Tee 1200mm will be inserted in the pre-cut slots of Main Runner at a regular interval of 600 mm to form a modular grid of 1200mm x 600mm. Additional Cross Tees of 600 mm shall be placed perpendicular to the Cross Tee 1200 mm long to finally form a grid of 600mm x 600mm. Grid of module size 600mm x 600mm shall be supported by 3/4 mm dia G.I. wire from purlins/soffit. 4mm thick High Pressure Steam Cured Non Asbestos Fibre Cement Ceiling tile Oceanic/ Diamond textured (Density>1200 Kg/m3, Modulus of Rupture(M.O.R)-10 MPa, Thermal Conductivity(K)-0.02 W/mK) of size 595mm x 595mm, confirming IS 14862 & Type B Category III of ISO 8336:1993, (Reaction to fire-A2-s1-d0) tested as per EN13501 Part-I & BS-476 Part 4,5,6&7, should be placed in the Grid module to form a False Ceiling. All complete as per the drawing & directions of GE.

M&L for 25 mm thick cement concrete type B 1 (1:2:4) using 20 mm graded stone aggregate as in sub bases, sub floors complete all as specified and directed.

M&L for coloured glazed ceramic tiles (300 mm x 450 mm/ 300mm x 600mm) & 7 mm thick on vertical surfaces such as skirting, dados etc, set and jointed in neat cement slurry over and including 10 mm thick bedding layer/ backing coat in CM 1:4 complete and pointed in white or coloured cement to match complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.50 sqm and n exc 4 sqm each complete all as specified and directed.

S&F 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F 40 mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 35mm thick factory made glazed and skeleton door shutters open rebated of second class hard wood rail and styles(Hollock), prepared to receive glass/gauge etc without sash bars, edges of framing plain cham-fered or rounded, mitred and rebated sash bars, any numbers The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed.

M&L for powder coated aluminium sliding window with anodized aluminium frame of 3 Track of size 92mmx32mmx 1.5mm thick, with sliding shutters(02 glass and 01 Wirecloth) with necessary channels (top rail, bottom rail and style of size 40mmx 18mm x1.10 mm thick) including glazing with tinted sheet glass panel 4.00mm thick and Aluminum alloy wirecloth 4mm nominal dia and avg width of aperture 1.4mm, fitted with necessary jointing cleats, glazing clips,locking device one for each shutter , rubber packing, aluminium beading, screws, rawl plugs including all necessary holes / drilling etc, complete all as specified and directed. Note : If mentioned section are not available in market, then immediate next higher section shall be provided by Contractor without any extra cost.

S&F 150 mm aluminium anodised barrel tower bolts of extruded section, ISI marked compete all as specified and directed.

S & F 150 mm extruded aluminium alloy handles, fabricated type, anodised, ISI marked compete all as specified as directed by Engineer -in -charge

S&F 100 mm MS butt hinges medium weight cold rolled mild steel compete all as specified and directed.

S&F 300 mm long and mild steel chromium plated sliding door bolts, plate type, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed compete all as specified and directed.

S&F mild steel spring 250mm for door, ordinary rat tail rod pattern springs, including roller and roller plate including welding as required for steel frame compete all as specified and directed.

S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tracks or wooden beeding patti compete all as specified and directed.

M&L for two coats of synthetic enamel paint over one coat of pink primer on wood or wooden based surface exc. 10cm width or girth including preparation of new or previously untreated surfaces compete all as specified and directed.

M&L for 75mm thick PCC 1:3:6, C1 (20mm graded stone aggregate) as in flooring complete all as specified and directed.

M&L for forming contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Gared A complete all as specified and directed.

Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete with fittings and fixtures such as switches, ceiling roses, pendants, regulators, socket, lamp holders brackets, bulk head fittings, tube light fittings etc complete and removing all retrieved materials to MES stores for segregation of serviceable /Unserviceable fitting&fixture and also making good disturbed surfaces of wall, floors etc complete all as specified and directed.

M&L for concealed point wiring complete for one light or one fan point controlled by one switch with single core FRLS PVC insulated, unsheathed, multi stranded copper conductor cables 1.5 Sqmm 1100 volts grade, with and incl 1.5 Sqmm FRLS PVC insulated, unsheathed, multi stranded copper conductor cables as continuous earth wire connected to metallic bodies of luminaries / fans etc at one end and to common earth dolly at other end, complete wiring drawn through & including PVC Conduit (Concealed in wall/ceiling) of size 20mm dia and above (as per conductor run ) medium grade, ISI marked, incl all accessories & fittings / junction boxes / inspection covers etc, with and incl concealed Modular metal flush box of suitable size flush within wall surface, suitable for fixing of Modular cover plate, switches / sockets etc, complete all as specified and directed Note : 1. Modular white cover plate shall be measured and paid separately. 2. Rate quoted shall deemed to be inclusive of Metal flush box, cutting chasing and making good of disturbed surface of wall / floor/ ceiling etc as original by brick work, plastering, white washing, OBD etc as required, complete all as directed.

All as per item No 103 above, but for one 3 pin socket outlet 5 Amp on same board complete all as specified and directed.

All as per item No 103 above, but for one 3 pin socket outlet 5 Amp on independent board complete all as specified and directed.

All as per serial item No 103 here-in-before, but for one socket outlet 15 Amps on independent board with 2.5 Sqmm copper conductor (Multi-stranded) insulated and unsheathed electric cable 1100 volts (ISI Marked) including PVC insulated and unsheathed electric cable 1100 volts 2.5 Sqmm copper stranded conductor as continuous earth wire connected to common dolly complete all as specified and directed.

S&F Modular Switch 1 way 16 Amps, 1 Module size complete all as specified and directed.

S&F Modular Socket 6 A, 5 Pin 2 Module size complete all as specified and directed.

S&F Modular Socket 6A/16 A, 5 Pin ,2 Module size complete all as specified and directed.

S&F Modular Switch 1 way 6 Amps, 1 Module size complete all as specified and directed.

S&F Modular white cover plate with frame, 3 Module size complete all as specified and directed.

S&F Modular white cover plate with frame,4 Module size complete all as specified and directed.

S&F Modular white cover plate with frame, 6/8 Module size complete all as specified and directed.

S&F angular lamp holder, metal cased body of brass with back plate including 09Watt LED Bulb in batten fittings, including Plastic square box of required size complete all as specified and directed.

S&F LED Bulb 9 Watt energy efficient color temp 6500k, lumen 825lm operating voltage 220 Volt complete all as specified and directed.

Supply and fixing ceiling rose, surface bakelite, 65 x 50 mm, three terminals complete all specified and directed.

S&F LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&Fin replacement decorative, wall mounting, brushed nickel finish fixture with opal glass diffuser suitable with 9 w LED lamp B22 base complete all as specified and directed.

S&F in replacement surface ceiling light warm white decorative ceiling light 18 watt complete all as specified and directed.

Taking down submain wiring of size 4/6 Sqmm complete all as specified and directed

M&L for concealed sub main wiring with 4 runs of 10 Sqmm FRLS, PVC insulated, unsheathed and stranded copper conductor cable with and incl 10 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable as earth wire connected with thimble from main DB to sub main DB, drawn drawn through & PVC conduit of size 25 mm and above incl all conduit accessories & fittings / junction boxes / inspection covers etc, with and incl cutting chasing and making good of disturbed surface of wall / floor/ ceiling etc as original by brick work, plastering, white washing, OBD etc as required, complete all as directed. incl taking out old wiring and conduit Note : 1. The cost of concealed conduit & accessories is deemed to be included in quoted rates. 2. The 4 runs of 10 Sqmm wire and one run of 10 Sqmm wire will be measured as one unit.

M&L for concealed sub main wiring with 2 run of 6 Sqmm FR, PVC insulated, unsheathed and stranded copper conductor cable with and incl 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable as earth wire connected with thimble from main DB to sub main DB, drawn drawn through & PVC conduit of size 20 mm and above incl all conduit accessories & fittings / junction boxes / inspection covers etc, with and incl cutting chasing and making good of disturbed surface of wall / floor/ ceiling etc as original by brick work, plastering, white washing, OBD etc as required,complete all as spcecified and directed. . Note : 1. The cost of concealed conduit & accessories is deemed to be included in quoted rates. 2. The two run of 6 Sqmm wire and one run of 6 Sqmm wire will be measured as one unit.

M&L for concealed sub main wiring with 2 run of 4 Sqmm FR, PVC insulated, unsheathed and stranded copper conductor cable with and incl 4 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable as earth wire connected with thimble from main DB to sub main DB, drawn drawn through & PVC conduit of size 20 mm and above incl all conduit accessories & fittings / junction boxes / inspection covers etc, with and incl cutting chasing and making good of disturbed surface of wall / floor/ ceiling etc as original by brick work, plastering, white washing, OBD etc as required,complete all as spcecified and directed. . Note : 1. The cost of concealed conduit & accessories is deemed to be included in quoted rates. 2. The two run of 4 Sqmm wire and one run of 4 Sqmm wire will be measured as one unit.

Taking down MCB Distributing board with MCCB/MCB of any size and capacity complete all as specified and directed

S&F VTPN DB 6 way double door type IP 54 including MCCB TP 100 Modal DU 100D Amps as incomer complete all as specified and directed

S&F sheet Metal enclosure double shutter type for DB’s 240 Volts Single Pole and Neutral 8 way with 200 Amps rated bus bar including wooden board of required size duly painted with matching colour complete all as specified and directed.

S&F SPN 40 to 63 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of Single pole and neutral in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

S&F SP 5 to 32 amp rating 240V, 10KA 'B' curve miniature circuit breaker (MCB) of Single pole and neutral in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metres below normal ground level, connecting to the Galvanized iron earth wire 4.0 mm dia by means of bolts, nuts , check nuts and washers of galvanized iron and steel earth wire protected by provision of GI light grade pipe 15 mm bore including provision of concrete pit made from PCC ( 1:2:4) type B-1 (using 20 mm graded stone aggregate) with 40mm thick cover of RCC 1:2:4 reinforced with XPM (Weight not less than 4 Kg/Sqm) and frame of angle iron 40 x 40 x 6 mm and handle of 6 mm dia MS bar made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom, 1.50 metre long placed on top edge of earth plate, common salt & charcoal filling, with fixing arrangement , funnel, wire mesh and earth work in hard/dense soil , returning filling in and removal of surplus soil to a distance not exceeding 50 metres, all as per electrical plate No 5 of SSR 2009 Part-I and connecting to MCBDB’s earth test point all as specified or indicated including testing on completion complete all as specified and directed.

S&F electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as specified and directed.

S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and directed.

S&F wall mounted fan 400 mm sweep single phase 230 volts complete all as specified and directed.

S&F in replacement DBOX MCB protected socket plastic base dimension 15 x 375 x 225 mm 4 module raise neutal link complete with one single pole MCB 20 Amp 'C' series 240 volts suitable for AC complete all as specified and directed.

NETRAPAL SINGH (BID ID -3388965)

novell engineers (BID ID -3390082)

j u enterprises (BID ID -3390516)

M/S Gupta Builders (BID ID -3390641)