Loading…
Loading…
Tender Value
₹2.7 L
EMD Value
₹5,320
Closing Date
11 Aug 2026, 6:00 pm
GE (N) AMBALA CANTT
GE (N) AMBALA CANTT
CA NO GE(N)AMB-61/2026-27 PROVN OF VIEW CUTTER ON BOUNDRY WALL OF BLDG NO P-169/2, MALL RD, APPT HOUSE UNDER AGE B/R-II GE(NORTH) AMBALA CANTT
2026_MES_779539_1
GE(N)/AMB-61/2026-27
Open Tender
Civil Works
Item Rate
180 days
GE (N) AMBALA CANTT
As per tender document
9 documents required · 9 mandatory
₹500
GE(N) AMBALA CANTT
₹5,320
Yes
18 Jul 2026
18 Jul 2026
13 Aug 2026
18 Jul 2026
11 Aug 2026
3 Aug 2026
18 Jul 2026 - 3 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Excavating in post holes (or similar holes) in soft/loose soil,each not exceeding 0.5 cum, getting out and removing surplus soil to a distance not exceeding 50m and making good surface, complete all as specified and as directed. | 40 | Each | - | - |
| 2 | Material and labour for PCC (1:3:6), Type C-2, using 40mm graded crushed stone aggregate as in foundations, filling and mass concrete, complete, all as specified and as directed. | 4 | Cubic metre | - | - |
| 3 | Material and labour for mild steel work in hand rails, half round or other stock section or core for wooden handrail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc, and similar work conforming to Fe 290 Gde E-165, complete, all as specified and as directed . | 800 | Kilogram | - | - |
| 4 | Supply and fixing mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 05 cm but not exc 10 cm long , diameter of neck 05 to 10 mm, complete all as specified and as directed. | 30 | Kilogram | - | - |
| 5 | Material and labour for preparation of new steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete, all as specified and as directed . | 10 | Square metre | - | - |
| 6 | Supply and fixing Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick having zinc coating 150 grams per Sqm (Az 150) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. | 100 | Square metre | - | - |
| 7 | Dismantling of brick work built in cement mortar or cement lime mortar including all quoins, arches, pillar etc but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified and as directed. | 3.6 | Cubic metre | - | - |
| 8 | Taking down cement or cement lime plaster of any description on brick or stone walls etc including racking out joints, hacking for key scrubbing down with water etc complete all as specified and as directed . | 80 | Square metre | - | - |
| 9 | Supply and fixing precast cement concrete louvres and jallies,25mm thick in PCC (1:3:6), type C0 (12.5mm graded stone agg.) set in cement mortar (1:6) as in reapir, including all mouldings, but excluding frame, complete all as specified and directed . | 20 | Square metre | - | - |
| 10 | Material and labour for brick work with sub class 'B' old size bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar (1:6), complete all as specified and as directed . | 3.6 | Cubic metre | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.18 MB
Tenderdocument.pdf
Tender Documents • 1.23 MB
BOQ_873134.xls
BOQ • 9.65 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].