DEPOSIT Work Vamanapuram Grama Panchayath Supply erection testing and commissioning of VT Pump at Anakudy Pump House and connected works

Amount

Supply and erection of VT Pumpset(2 Nos)

OD156493/2022-2023:Supply, erection, testing and commissioning of vertical turbine pumps after sufficient trial runs capable of discharging 22lps against a total head of 135m having 960-1500sync speed with bronze LTB2 impeller and SS 316 Shaft with cast iron casing and also with bronze TB2 neck ring, SS 410 sleeve with suitable size suction pipes , non return valves, sluice valves etc. . Warranty shall be limited to Two years. The rates above include for supply, erection, commissioning and maintenance for two years of pump sets of different duty conditions. The speed specified is 1500 rpm and overall efficiency of 70%. The rates include the following items: 1. Cost of pump. 2. Cost of motor. 3. Cost of panel board. 4. Cost of starter - For motors of capacity 100 HP and above soft starters are to be provided. 5. Aluminium cable from panel board to starter and from starter to motor ( total length of 10 m) 6. Capacitor. 7. Foot valve. 8. Non return valve and Sluice valve. 9. Pipe connection works for suction side and that at delivery side up to valves including fixing of Non return valve and Sluice valve. 10. Suitable earthing as per IE rules. 11. Erection charges of all equipment including foundation cost of cement sand and metal. 12. Trial running and commissioning. 13. Maintenance during a period of two years.

OD157563/2022-2023:Supplying a mechanical flow meter of Woltman type confirming to ISO 4064 Class B of ARAD/ZENNER/REYCHEM RPG/ ITRON make and the flow meter shall be tested and certified by FCRI Palakkad <br>150mm Size

MS Fabrication Work of Delivery Pipe

100.37.6.1:In situ fabrication of M.S. pipes of size 150mm (I.D.) using 8mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete.

100.37.6.2:Fabricating M.S. flanges of diameter 150mm using 12mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete: For pipes fabricated with 8mm thick M.S. plates.

100.37.6.3:Cutting 150mm (I.D.) M.S. pipes for making bends and other specials by gas cutting including cost of gas, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.

100.37.6.4:Welding 150mm (I.D.) M.S. pipes for making bends and other specials by gas/electric welding machine including cost of gas and welding rods, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.

100.37.6.5:Grinding cut and weld edges of 150mm (I.D.) M.S. pipes during fabrication work including all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.

Steel Work

10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

12.4.1:Providing ridges or hips width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.0.80 mm thick with zinc coating not less than 275 gm/m2

10.5.1:Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using M.S. angels 40x40x6 mm for diagonal braces

Automation

OD166835/2022-2023:Automation

SANTHOSH KUMAR K

SUNIL KUMAR

Bidder Name

JAYAKUMAR

SANTHOSH KUMAR K

SUNIL KUMAR