Repairs to various Snow Machines viz. Snow Cat 15 (Farmtrac), Snow Cat 60 HP (Sonalika), Snow Cat 9010 (Holland), and Snow Machine 74 (LPT 715) of Mechanical and Hospital Sub-Division 1st Anantnag.

Fabrication of Tool Box on the rear side of Snow Cat over which a old serviceable Fuel Tank of Capacity 160/180 litres could be mounted, dimensions of the tool box are to be kept as length 762mm, width559mm, height 508mm. The same need to be fabricated out of the Ms angle of size 06mm thickx38mmx38mmx9753mm, Ms Sheet 03mm thickx1828mmx914mm & flat iron 06mm thickx32mmx6096mm. All the other items required for execution of job needs to be provided. The job also includes providing/mounting of old serviceable fuel tank of 180 litres capacity on the fabricated tool box. The job includes providing of complete fitting arrangement like rubber packing, nuts & bolts of required size. The job includes providing and fitting of supply and return diesel pipes including pipe clips, banjo bolts etc of required size. The job includes painting of tool box and fuel tank with two coats of synthetic enamel paint in black after two or more coats of metal premier. The job includes testing of the machine on road for checking proper functioning of the machine and the equipments fitted. All the tools, tackles, skilled labour, leads, lifts and carriage of machine from sub-divisional office to local work shop is with scope of the contractor. SNOW CAT – 15 FARMTRAC 90HP

P/F of starter/ignition switch along with replacing the start/stop solenoid switch with mechanical spring loaded start/stop type mechanism by way of removing the old damaged starter switch and solenoid and replacing the damaged parts with new parts as mentioned above. All the consumables and parts required are in the scope of the part. SNOW CAT 60 HP (SONALIKA)

Providing & Fitting of glass of size 2’x1.5’ (Left Side lower Front cabin) . The job includes cleaning and preparing the glass base by way of scraping and then fitting of the new windshield including installation of new rubber beading /sealant along with new wind shield. The job includes carriage, consumable and labour charges required for the job. SNOW CAT – 15 FARMTRAC 90HP

Replacement of front tyre (left side) (12.4-24) tube by way of Wheel removal & refitting, Tube replacement & Air filling & leak test. SNOW CAT 9010 (HOLLAND)

Repair of front tyre tube of size puncture of size (12.4-24) including dismantling and removal of the front wheel and tyre, taking out the tube, locating and repairing the puncture with suitable vulcanized patch and puncture solution, checking the tube for air leakage, refitting the repaired tube and tyre on the rim, inflation to the required tyre pressure, refitting the wheel on the tractor, and all necessary labour, tools, tackles, consumable materials and allied works complete in all respects SNOW CAT 60 HP (SONALIKA)

Repairs to blade assembly by way of dismantling the blade assy. From the machine then cutting of the rear horizontal support brackets 02 no.’s of the blade by way of gas cutting and shifting it inwards towards the nose of the blade by 8” and replacing the vertical support channels 02 no’s by ISMC 100 L-1000mm 02 No.’s by way of cutting and welding. The job also includes providing and welding of 04 no’s gusset plates of size 250x160mm between the vertical and horizontal support brackets . Further the job includes repairing of the curved blade profile by way of gas heating, hammering & patch welding where-ever necessary to smoothen out the blade. The job also includes P/F of nuts and bolts of required size wherever required. SNOW CAT 60 HP (SONALIKA) & SNOW CAT 9010 (HOLLAND)

Providing & Fitting of the complete tie rod assembly, The job including dismantling of the defective tie rod assembly, removal of worn tie-rod ends/ball joints, supply and installation of new tie rod assembly (01 No.) replacement of tie-rod end/ball joint set (02 Nos.) castellated nuts, split pins and allied fastening items, grease and including GST. The work shall include proper tightening, greasing, checking of steering play and road/operational testing after replacement. SNOW CAT 9010 (HOLLAND)

Repairment to blade assembly. This job includes dismantling of blad assy, removing of worn out bolts, repairs to all damaged/cracked joints and frame by means of welding, grazing and finishing in order to strengthen the blade frame to withstand impact load during work. The job also includes P/F of nuts and bolts of required size wherever required. SNOW MACHINE-74 (LPT 715)