ADDN ALTN AND IMPROVEMENT TO CERTAIN OMQs AT AF STATION BAREILLY

Amount

M & L for providing plain cement concrete 1:2:4, type B-0 (using 12.5 mm graded crushed stone aggregate), as in copings, bed block for embedding hold fasts, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed.

Demolition of cement concrete (un-reinforced) any description and in any position not otherwise specifically provided for complete all as specified and directed.

Demolition of brick work or stone / boulder masonry including all quoins, arches, pillars, etc. built in cement mortar or cement lime mortar complete all as specified and directed.

M & L for brick work with fly ash brick, old size bricks straight or curved on plan exc. 6.00 m mean radius built in cement mortar 1:6 complete all as specified and directed.

Disconnecting existing storage water tank over roof of building, any height, not exc. 1000 Litre capacity, setting aside (or lowering if required) for repairs, cleaning etc and hoisting, if required, reconnecting and re-fixing in position (cleaning, repairing etc. to be measured separately) complete all as specified and directed.

Dismantling of storage water tank over roof of building, any height, n exc. 1000 Litre capacity complete all as specified and directed.

Taking up or down 15 mm bore steel water tubing and connection including cleaning for refixing or removal complete all as specified and directed.

Taking up or down 20 mm bore steel water tubing and connection including cleaning for refixing or removal complete all as specified and directed.

Taking down eaves gutters and rain water pipes (any size or pattern) including all fittings, heads, shoes, bends, swan necks etc. (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

Demolition of reinforced cement concrete (RCC Tanks over roof of building, any height etc) in any position and any description including cutting of reinforcement bars to facilitate demolition complete all as specified and directed.

S & F 500 Litre capacity rotational moulded polyethylene water storage tanks three layered (cylindrical vertical with closed top) of specifications as per MES Schedule 2009, Part – I and hoisted, fixed in position complete all as specified and directed.

S & F 1000 Litre capacity rotational moulded polyethylene water storage tanks three layered (cylindrical vertical with closed top) of specifications as per MES Schedule 2009, Part – I and hoisted, fixed in position complete all as specified and directed.

S & F in repair 20 mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 210 gram) complete all as specified and directed.

S & F 15 mm bore steel water tubing medium grade galvanised with and including all fittings and fixed to walls and ceilings or laid under floors complete all as specified and directed.

S & F 20 mm bore steel water tubing medium grade galvanised with and including all fittings and fixed to walls and ceilings or laid under floors complete all as specified and directed.

Re-fixing of 20 mm bore old steel water tubing and connection in new or old position (wall, ceiling, floors etc) after taking down and including cleaning of old pipes and provision of new GI fittings as required complete all as specified and directed. NOTE: - OLD STEEL WATER TUBING OBTAINED FROM DISMANTLING SHALL BE USED UNDER THIS ITEM.

S & F 110 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint fixed to walls with MS clamps complete all as specified and directed.

S & F 110 mm bore PVC (SWR) bend with access door any radius complete all as specified and directed.

S & F 110 mm bore PVC (SWR) bend any radius complete all as specified and directed.

S & F in repairs for 75 mm dia cast iron floor trap long neck without grating including jointing to waste pipe fixed in cement concrete 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate) complete all as specified and directed.

S & F 100 mm bore cast iron soil, waste and vent pipe, sand cast, in any length, with or without ears, with lead joints, laid in trenches or in floor complete all as specified and directed. Note :- Excavation and earth work will be measured and paid seperately.

S & F in repair vitreous china wash down water closet (Pedestal pattern), white (excluding fixing bolts, flushing cistern) but including flush pipe and plastic seat cover, connector and waste pipe etc including making good complete all as specified and directed.

S & F in repair vitreous china water closet (squatt pattern) complete of pattern “long pan”, size 580 mm X440 mm, white with integral foot rest including cast iron ‘P’ or ‘S” trap and flush pipe , any pattern but excluding flushing cistern including provision of lime concrete bedding and making good floor as per existing complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floor and paving not exc. 15 cm thick (Below or above ground level) complete all as specified and directed.

M & L for 75 mm thick cement concrete 1:3:6 type C-2, using 40 mm graded crushed stone aggregate as in plinth protection laid in bays, not exc 3.00 Sqm each, finished surface even and smooth without using extra cement complete all as specified and directed.

Taking down cement or cement lime plaster from brick or stone walls etc. including raking out joints, hacking for keys, scrubbing down with water etc. complete all as specified and directed.

M & L for 15 mm thick rendering in CM 1:4, up to 3.0 M height including steel scaffolding, on fair faces of brick or work or concrete surfaces, finished fair & even including mixed with liquid WPC as per manfaturer's instructions complete all as specified and directed. Note :- WPC shall be measured and paid seperately under rescpective item of BOQ

M & L for 15 mm thick rendering in CM 1:4, from 3.0 M to to 7.0 M height including steel scaffolding, on fair faces of brick or work or concrete surfaces, finished fair & even including mixed with liquid WPC as per manfaturer's instructions complete all as specified and directed. Note :- WPC shall be measured and paid seperately under rescpective item of BOQ

M & L for 10 mm thick rendering in CM 1:6, in patch, on fair faces of brick work or concrete surfaces, finished even and smooth complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

M & L for 10 mm thick rendering on concrete surfaces of ceiling in cement mortar 1:3 finished even and smooth without using extra cement complete all as specified and directed.

M & L for preparation of new plastered surface of wall and applying two coat of exterior emulsion paint (Blue) on wall strip over one coat of primer complete all as specified and directed.

M & L for preparing newly plastered or previously untreated wall surfaces and applying two coats of cement base paint over one coat of primer complete all as specified and directed.

M & L for preparation of new plastered or previously untreated surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

M & L for preparation of newly plastered or un-plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M & L for preparation of old surfaces of ceiling including brooming down or steel wire brushing, strapping down smoke soot, moulds, moss and efflorescent salts and applying one coats of white wash on old decorated surfaces of ceiling complete all as specified and directed.

M & L for preparation of old surfaces including brooming down to remove all dust, dirt and loose scales of item and other foreign matter or steel wire brushing scrapping down smoke soot, grease spots moulds moss and efflorescent salts and trading oil and greasy spots and applying one coat of exterior emulsion paint(Blue ) on wall strip complete all as specified and directed.

M & L for preparation of old surfaces including brooming down to remove all dust,dirt and loose scales of item and other foreign matter or steel wire brushing scrapping down smoke soot,grease spots moulds moss and efflorescent salts and trading oil and greasy spots and applying two coat of cement base paint on wall all as specified and directed

M & L for preparation of old surfaces including brooming down to remove all dust, dirt and loose scales of item and other foreign matter or steel wire brushing scrapping down smoke soot, grease spots moulds moss and efflorescent salts and trading oil and greasy spots and applying one coat of oil bound distemper on wall all as specified and directed.

M & L for preparation of old surfaces including brooming down to remove all dust,dirt and loose scales of item and other foreign matter or steel wire brushing scrapping down smoke soot,grease spots moulds moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash on wall all as specified and directed

Taking down chowkat or frame with shutter( without taking off shutter from frame ) exc 1.5 Sqm but n exc 4 Sqm each complete complete all as specified and directed

Taking down chowkat or frame with shutter( without taking off shutter from frame ) n exc 1.5 sqm each complete all as specified and directed

Taking down shutter of any description exc 2 sqm each complete all as specified and directed

Taking down shutter of any description exc 1 sqm and n exc 2sqm each complete all as specified and directed

S & F factory made PVC door frame of size 50 x 47mm with a wall thickness of 5mm grid PVC sheet mitered at corner and pinned with two members 150mm long brackets of 15 x 15mm MS Square tube 19 gauge EPDM rubber gasket weathered sheet to be provided through the frame, door frame to be fixed to the wall with stainless steel screw of 65/100mm size complete as per manufacturer specification. Make :-Rajshree/Kumar Arch Tech Ltd

S & F 30mm thick factory made solid panel PVC door shutter conforming as per IS-4020 made from MS tube of 19 Gauge thickness of size 19 x 19mm style and 15 x 15mm for rail covered with heat moulded PVC channel of 5mm thick and 75mm, 125mm, 125mm wide for top rail, lock rail and bottom rail on either side at 5mm thick 20mm wide cross PVC sheet of gap inserted for top rail and bottom rail, paneling of 5mm PVC sheet fitted in MS frame welded/sealed to the style at rail with 30mm wide, 5mm thick PVC sheet beading sides and jointed together with solvent cement adhesive etc complete all as specified and directed by Engineer-in-Charge. Make :- Rajshree/Kumar Arch Tech Ltd. Note :- PVC shutter shall be fixed with the frame by means of stainless steel screws and rate of the same deem to be included in the quoted rate.

M & L for 2nd class hard wood (SAL) plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S & F 35 mm thick (Batten thickness) factory made plain, framed, panelled shutters (Two panels) with lock rail and panel of 9 mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneers on both faces and size of the members of shutter are as per IS – 1003 (Part – I) made of kiln seasoned & chemically pressure treated, 2nd class hardwood complete all as specified and directed.

M & L for glazed and skeleton shutters, 35mm thick, factory made, 2nd class hard wood, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted withcut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. cla-use 8.20 (a); supplied and fitted to chowkats complete all as specified and directed.

S & F 300 mm long (Length of bolt) aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolt of extruded sections or cast aluminium alloy complete all as specified and directed.

S & F 100mm long Stainless steel butt hinges, cold rolled MS, medium type,and fixed with stainless screw complete all as specified and directed.

S & F for 125 mm extruded aluminum alloy classic handles, fabricated type, anodised, fixed with stainless 04 Nos screws complete all as specified & directed

S&F 150 mm aluminium, anodised, barrel tower bolts of extruded section and fixed with bright stainless steel bolt and fixed complete all as specified and directed.

S&F mild steel 300mm, ordinary rat tail rod patttern springs includding roller and roller plate complete all specified and directed.

S & F 300 mm long mild steel sliding door bolt, bolt type, stove enamelled black, with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts complete all as specified and directed.

S & F 100mm long mild steel butt hinges, cold rolled MS, medium type,and fixed complete all as specified and directed.

S & F for 125 mm Mild steel pressed handles, oval type, stove enamelled, black, complete all as specified and directed.

S&F 150 mm mild steel barrel tower blots, stove enamelled black, with bright bolt and fixed complete all as specified and directed.

M & L for preparation of new or previously untreated wooden surfaces exc. 10 cm width or girth and applying two coats of synthetic enamel paint (Ist quality) over a coat of pink primer complete all as specified and directed.

M & L for preparation of new or previously untreated steel and iron surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (Ist quality) over one coat of red oxide primer complete all as specified and directed.

S&F mild steel box type windows with side hung shutter (wire guage or glazed shutter) including projecting type hings with steel handles and steel peg stay complete with sash bars, dovetailed or welded to receive wire gauge or glass with one shop coat of zink chromate primer complete all as specified and directed

M&L mild steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or FE 310-0 complete all as specified and directed.

Supply and providing mild steel steel powder coated ECO-4000 series windows and ventilaters of size exc 1 Sqm & n exc 3 sqm consisting both the glazed and wire glazed shutter, Grill and fittings with following specification and all as specified and directed :- (a) Frame shall be of 0.60mm thick powdercoated rolled section of size 72mm x 55mm and mullon shall be 72mm x 50mm (design of window as per existing window ) fitted with nylone self expanding caps and driving MS electroplated 80mm long screw. (b) Frame of glaged shutter shall be 47mm x20mm and glass beed shall be 12mm x 12mm fitted with nylon / polypropylene corner bracket and mulion clips all as per manufacturers instructions . (c) Frame of wire gauzed shutter shall be 40mm x20mm and glass beed shall be 12mm x 12mm fitted with nylon / polypropylene corner bracket and mulion clips all as per manufacturers instructions. (d) MS grill shall be powder coated made with 10mm square bar @ 110mm center to center welded to mild steel flat 12mm x 6mm fitted with machine screw to window frame. (e) Rubber gasket EPDM shall be used for all glass and gauged shutter. (f) SS pivot hinges , seccolar handle with seccolar stay shall be provided with each shutter. Note:-(i) Glass and wire mesh shall be measured and paid seperately under respective items. (ii) Necessary sketch of steel window is enclosed with this tender for guidance only. Make :- (i) NCL Alltec & Seccolar Ltd (ii) Ashwani & Sons (iii) Any manufacturer as approved by E-in-Cs Branch

All as per item No. 63 above but size of window/ventilatorf n exc 1 Sqm but without provision of space & additional grills/guradbars for AC

S&F for sheet glass 4.80 mm thick ordinary quality and glazing with oil putty in square exc 0.50 sqm in each pane complete all as specified and directed.

S & F for stainless steel wire cloth 0.36 mm nominal dia of wire and width of aperture 1.18 mm fixed with stainless steel wire staples complete all as specified and directed.

S & F of anodised powder coated (Colour as approved by GE) (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows, ventilators/partition with one or more rebates including joining cleat etc. for fixing complete all as specified and directed.

S & F of anodised powder coated (Colour as approved by GE) (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 Kg per running metre including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as one No. 150 mm long peg stay, two Nos. 100 mm size B-21 type hinges, one No. suitable size handle etc. including all fittings complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M & L for providing 25 mm thick cement concrete 1:2:4, type B-O (using 12.5 mm graded crushed stone aggregate) as in floor etc, surface finished even and fair complete all as specified and directed.

M & L for 15 mm thick screed bed or bedding layers, in CM 1:4 for laying floor finish complete all as specified and directed.

M & L for non Skid, colour, ceramic tiles (preimium quality) of size 400 mm X 400 mmX 7 to 8 mm thick (Square / rectangular) as in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface complete all as specified and directed. Make : Kazaria

M & L for vitrified ceramic coloured tiles 10 mm thick, premium quality, double charged (Square or Rectangular) polished, area of each tile not exc. 0.36 Sqm (600mm X 600mm), as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile complete all as specified and directed.

M & L for 10 mm thick rendering on fair faces of brick work or concrete surfaces with cement mortar 1:6 finished even and fair as a backing coat for fixing tile complete all as specified and directed.

M & L for glazed ceramic digital, coloured/printed tiles, 600mm X300mmX 7 mm thick, as on vertical surface of wall such as skirting, dado, riser etc., match to floor tile, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile complete all as specified and directed. Make : Kazaria

M&L for chequered (rubber moulded glossy finish ) cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigments to match the existing surface complete all as specified and directed.

Taking down shutters from chowkhats, easing adjusting & refixing in same opening after repair works, exc 1 Sqm and n exc 2 Sqm each complete all as specified and directed.

S & F in-repair, Oval type, Vitreous china wash basin, snow white, flat back of size 560mm x 400mm including cutting for and pinning in ends of the brackets or erecting stand complete all as specified. Make : Cat Part No S2030102 of Cera or equivalent Cat Part of Parryware as approved by GE.

S& F in-repair, PVC low level flushing cistern white colour 10 Litres capacity, valve less, with inlet, ball valve, float and handle including brackets, PVC flush bend pipe complete all as specified and directed. Make : Commander (Champion)/Cera (Ceina)/Parryware (Sleek).

S & F in repairs, stop valves 15mm dia of pipe in cast copper alloy, fancy type chromium plated with long shank and cup, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S & F in repairs; PVC connection 45 cm long with two check nuts and washers complete all as specified and directed. Make: Prayag/ RS Industries.

S & F in repairs; bib cock with Wall flange, fancy type, chromium plated with fancy head with or without littered “Hot” or “Cold” screwed down, screwed for iron pipe of 15mm bore dia complete all as specified and directed. Make :Jaquar Cat Part No. QQT-7037 of Queen's series or equivalent

S & F in repairs; bib taps, fancy type, chromium plated with capstan head with or without littered “Hot” or “Cold” screwed down, screwed for iron pipe of 15mm bore dia complete all as specified and directed.

S & F stainless steel St 304 , CP Grating doom 100mm dia complete all as specified and directed. Make :- Prayag Cat Part No. FT03 & FT 04

S & F in repair "Maze over head shower, 150 mm dia, round shape, single flow (Body & face plate stainless steel with Chrome finish) with Rubit cleaning sysytem" with swivel joint including a shower arm 15mm size, 195mm long with bend of 45 degree with flange of stainless steel (Minimum weight 40 gms) complete all as specified and directed. Make : Jaquar Cat Part No. OHS-CHR-1603 of Queen's series or equivalent

S & F in repairs for tubular towel rail, 20mm dia, 'D' type, 60cm long, between flanges, brass chromium plated, complete, fixed to walls complete all as specified and directed. Make : Jaquar Cat Part No. AQN-7711 of Queen's series or equivalent

S & F in repairs for tubular towel ring, 30cm dia flanges brass chromium plated complete, fixed to walls, complete all as specified and directed. Make : Jaquar Cat Part No. AQN-7721of Queen's series or equivalent

Demolition of Stone sett paving, of any description or thickness, laid, bedded and pointed in any mortar complete all as specified and directed.

M & L for providing 18-20 mm thick, 'Z' black, granite stone slab including sanwich type (IInd layer of 20mm at front) (table rubbed and polished) bull nosed as on shelves /cooking plateform /pillars over and inculding 20 mm thick screed bed in CM 1:4, set, jointed in neat cement slurry and pointed in white/coloured cement to match the shade complete all as specified and directed.

M & L for providing 18-20 mm thick 'Z' black, granite stone slab including (table rubbed and polished) bull nosed as on shelves for cooking plateform/ WHB /pillars etc, over and inclkuding 20 mm thick screed bed in CM 1:4, set, jointed in neat cement slurry and pointed in white /coloured cement to match the shade complete all as specified and directed.

M & L for providing 20mm thick marble white makrana, machine cut, bedded, jointed and pointed with grey cement slurry, including cutting and polishing, bull nosed as on shelves / window cill / pillars over and including 20 mm thick screed bed in CM 1:4, set, jointed in neat cement slurry and pointed in white/coloured cement to match the shade complete all as specified and directed.

S&F for sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. Make : Nirali

S & F for stainless steel plate rack made out of 1mm thick steel sheet of size 75cm x 90cm x 25cm (minimum weight 3.5 Kg) with fixing arrangement complete as per sample kept in GE`s Office, suitable for officers quarters complete all as specified and as directed by Engineer-in-Charge. Make : Nirali

M&L in repair 12 mm prelaminatd particle board, interior grade, glossy finish, prelaminated one side with deocrative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

M&L in repair 18/19mm particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work complete all as specified and directed.

M&L for 0.90 mm thick sunmica, decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with adhesive as per manufacturer instruction complete all as specified and directed.

M&L for 0.90 mm thick sunmica decorative laminate type 1 of surface finish, white colour and as approved fixed with adhesive as per manufacturer instruction complete all as specified and directed.

M&L in repair, 18/19mm prelaminatd particle board, interior grade, glossy finish, prelaminated one side with deocrative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

S&F 100 mm long Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F 150mm long Aluminium handles, cast type, anodised complete all as specified and directed

S&F 150mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed

S & F 140 mm size (Overall length of cover plate) floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and directed.

S & F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

S & F 30 mm wide flap when open, mild steel bright finish or electro galvanised continuous (Piano) hinge complete all as specified and directed.

S & F in repairs; 15 mm bore, "Angular Stop Cock with wall flange", fancy type, chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed with long shank and cup (concealed type) complete all as specified and directed. Make : Jaquar Cat Part No. QQT-7053 of Queen's series or equivalent

S& fixed in repair 20mm dia Gun-metal, golbe or gate valves, with iron wheel head, screwd both end sor iron pipe and fixed complete all as specified and directed.

S&F for 100mm long Aluminium hinge , cast type, anodised complete all as specified and directed.

S&F for 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square in n exc 0.5 sq.m in each pane complete all as specified and directed.

S&F for 3mm thick Sheet frosted glass, ordinary quality and glazing with oil putty in square in n exc 0.5 sq.m in each pane complete all as specified and directed.

Hacking out old broken glass (any thicknesss, size,quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

Drilling holes carefully for cooking plateform in granite stone slab for gas pipe etc n. exc 25mm dia complete all as specified and directed

S&F in repairs for CP mixer for mixing for kitchen sink (Sink Mixer with Regular Swinging Spout (Wall Mounted Model) with Connecting Legs & wall Flanges), hot & cold water, screwed down for iron pipe and fixed complete all as specified and directed. Make : Jaguar Cat Part No. QQT-7309 of Queen's series or equivalent

S&F in repairs for CP mixer 2 in1 for mixing for WHB (Central Hole Basin Mixer with regular Spout without Popup waste System with 450 mm Long Braided Hoses), hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. Make : Jaguar Cat Part No. QQT-7167B of Queen's series or equivalent

S&F in repairs for CP wall mixure three in one with hand shower with accessories (Wall Mixer with provision for over head shower with 115 mm long bend pipe on upper side, connecting legs & wall fanges) with mark 'Hot' and 'Cold' complete all as specified and directed Make : Jaguar Cat Part No. QQT-7273UPR of Queen's series or equivalent

S&F in repairs for toilet paper holder chromimun plated as approved quality complete all as specified and directed. Make : Jaguar Cat Part No. AQN-7751of Queen's series or equivalent

S&F in repairs corner self fency with 5.50mm thick glass mounted on CP brass frame fixed with brass screw & plug, Size not less than 450mm as suitable for bath room as per manufacturer instruction complete all as specified and directed. Make : Jaguar Cat Part No. ACN-1173 of Queen's series or equivalent

S & F in repairs Chromium plated health faucet with hand shower & flexible cord suitable for EWC including fixing to steel pipe or union of 15 mm bore dia, (Hand Shower (Health Faucet) with 8 mm Dia 1.2 M long flexible tube & wall hook) complete all as specified and directed. Make : Jaguar Cat Part No. ALD-573 of Queen's series or equivalent

Supply and fixing in repairs fancy type Tumbler Holder chromium plated complete all as specified and directed. Make : Jaguar Cat Part No. AQN-7741of Queen's series or equivalent

Supply and fixing in repairs sink cock with regular swinging spout (wall mounted model) with wall flange for direct water in kitchen complete all as specified and directed. Make : Jaguar Cat Part No. QQT-7347 of Queen's series or equivalent

S&F Ball catches with 8 mm dia steel ball and brass body suitable for cupboard and stricking plate complete all as specified and directed

S&F 40 mm dia cupboard knobs fixed with nut, screws of brass, bright, complete all as specified and directed.

S&F in repair 25 mm dia PVC coated curtain rod with fixing brackets , stops etc complete all as specified and directed. Note :- The rate of brackets deem to be included in the quoted rates.

S & F side fancy roller, PVC, Gold colour, for curtain rod of 25 mm dia complete all as specified and directed.

S & F mild steel framed work such as grills, gratings etc. with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, frame work of water tanks and similar work conforming to Fe 410-0 or FE 310-0 complete all as specified and directed.

S&F for SS sliding double channel for drawer up to 450 mm long all as approved by GE complete all as specified and directed.

S&F for SS sliding double channel for drawer up to300 mm long all as approved by GE complete all as specified and directed.

S&F for SS 2mm thick wire Trolly/Tray as approved by GE for modular kitchen cabinet complete all as specified and directed.

S&F for SS 75x50 mouldar type hydrolic hinge for modular kitchen cabinet all as approved by GE complete all as specified and directed.

S&F for SS 50mm dia 75mm long stay for bottom of modular kitchen cabinet all as approved by GE complete all as specified and directed.

Taking down existing unserviceable rusted rolled shutter any description of size n exc 4.00 sqm each (opening size) push pull or manual type including taking out all unserviceable rusted, decayed parts, portions by cutting and repairing / replacement of defective part / portion of shutter guide channel anchorage rod, hood cover, locking plate, profiles, springs, pulley etc. hanging and refixing in the same opening by maintianing proper alignment and greasing welding to moveable parts of shutter and providing one coat of red oxide zinc chrome primer to all parts and position before refixing complete all as specified and as directed. Note:- Cost of new replaced parts if any will be measured and paid under relevant items here in under.

All as per item No 130 above but size exc 4.00sqm (opening size) gear/no-gear operative type with chain wheel hand chain complete all as specified and directed

Supply only axle/anchorage pipe 40mm bore MS black pipe heavy grade cut to size for full length(single peace) complete all as specified and as directed.

Supply only rolling hood cover 1.0 mm thick MS sheet bend to shape cut to length with a coat of zinc chrome primer complete all as specified and directed.

Supply only MS locking plate of standard size and shape for rolling shutter of approve quality with a coat of red oxide zinc chrome primer febricated by 3.15 mm thick MS sheet with MS angle iron 40x40x6mm at bottom including sliding bolts with arrangement of locking by pad lock and handle both 02 Nos at each corner to be fitted both side with 20x6mm flat iron complete all as specified and as directed by Engineer-in-charge.

Supply only rolling shutter profile inter locking both section formed from cold relled steel strip 1.25 mm thick single peace cut to length rebated with mild steel clips secured either ends minimum width of profile 75mm with including applying a coat of red oxide zinc chrome primer complete all as specified and as directed by Engr-in-Charge.

Supply only wire spring of rolling shutter, 90 mm dia and 450mm long standard quality with MS wire not less than 8mm dia complete all as specified and directed.

Drawing out carefully copper/aluminium point wiring from existing conduit without damaging the conduit (light,fan point, socket or power) complete and (taking down and removing old fittings such as switches, ceiling roses, pandents, regulators, sockets, tube lights, holders etc to be measured separately) and making good disturbed surfaces of walls, floor etc complete all as specified and directed. Note :- Old Exhaust Fans to be deposited in MES store for safe custody.

Drawing out old sub main copper/aluminum cable of various sizes from existing conduit/battens etc complete all as specified and directed.

Taking down old MCCBs/MCBs any capacity and any make after disconnecting complete all as specified and directed.

M&L for point wiring for one light point/ fan point in the existing conduit controlled by one switch with 1.5 Sqmm PVC insulated un-sheathed copper conductor single core multi strand cable in colour code and 1.5 Sqmm PVC insulated un-sheathed copper conductor single core cable (green colour) as earth lead in and controlled by one switch excluding MS modular metal flush box of required size for modular switches & sockets to match with the existing specification complete all as specified. Make of cable :- Finolex, Havells, Polycab, Grandlay, Anchor Note :- (i) The rates are included with removal of old corroded sunken boxes, hylum sheets, nuts, bolts, screws extra and labour charges for fixing of modular flush boxes as per the required modules and sizes/ ways. (ii) Modular flush boxes will be measured and paid separately in respective items of schedule.

(a) One light point controlled by one way switch.

(b) One Bell point controlled by one way switch.

(c) One Fan point controlled by one way switch.

(d) One 3 pin socket outlet, 5/6 amps, on independent board.

(e) One 3 pin socket outlet, 5/6 amps, on the same board.

All as per item No 141 here-in-before but with copper conductor 2.5 sqmm for One 3/5 pin socket outlet, 15 amps on independent board all as specified and directed.

M&L for submain wiring with two run of single core PVC insulated unsheathed multi stranded copper conductor FRLS cable of size 4 Sqmm 1100 volts grade and one run of PVC insulated unsheathed stranded copper conductor FRLS cable of size 4 Sqmm 1100 volts grade as earth continuity conductor drawn in existing concealed conduit on roof/wall/ceiling including making good the disturbed surfaces of wall etc including complete all as directed. Note : Two run of single core cable and one run of earth wire will be measured as one length ).

M&L for submain wiring with two run of single core PVC insulated unsheathed multi stranded copper conductor FRLS cable of size 6 Sqmm 1100 volts grade and one run of PVC insulated unsheathed stranded copper conductor FRLS cable of size 6 Sqmm 1100 volts grade as earth continuity conductor drawn in drawn in existing concealed conduit on roof/wall/ceiling including making good the disturbed surfaces of wall etc including complete all as directed. Note : Two run of single core cable and one run of earth wire will be measured as one length.

M&L for submain wiring with two run of single core PVC insulated unsheathed multi stranded copper conductor FRLS cable of size 10 Sqmm 1100 volts grade and one run of PVC insulated unsheathed stranded copper conductor FRLS cable of size 10 Sqmm 1100 volts grade as earth continuity conductor drawn in drawn in existing concealed conduit on roof/wall/ceiling including making good the disturbed surfaces of wall etc including complete all as directed. Note : Two run of single core cable and one run of earth wire will be measured as one length.

S&F Modular switch 1 way 6A, 1 module complete all as specified and as directed.

S&F Modular Socket, 6A - 2/3 pin combined 2 module complete all as specified and as directed.

S&F Modular switch 1 way 16A, 1 module complete all as specified and as directed.

S&F Modular Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and as directed.

S&F Modular Fan Regulator, Step Type 120W - 2 module complete all as specified and as directed.

S&F Modular Bell push 6A, 1 module complete all as specified and as directed.

S&F Electric Bell, single phase, AC, 230 volts complete all as specified and as directed.

S&F Modular White Cover Plate with Frame, 1 Module complete all as specified and as directed.

S&F Modular White Cover Plate with Frame, 2 Module complete all as specified and as directed.

S&F Modular White Cover Plate with Frame, 3 Module complete all as specified and as directed.

S&F Modular White Cover Plate with Frame, 4 Module complete all as specified and as directed.

S&F Modular White Cover Plate with Frame, 6 Module complete all as specified and as directed.

S&F Modular White Cover Plate with Frame, 12 Module complete all as specified and as directed.

S&F Modular Metal Flush Box 1 module complete all as specified and as directed.

S&F Modular Metal Flush Box 2 module complete all as specified and as directed.

S&F Modular Metal Flush Box 3 module complete all as specified and as directed.

S&F Modular Metal Flush Box 4 module complete all as specified and as directed.

S&F Modular Metal Flush Box 6 module complete all as specified and as directed.

S&F Modular Metal Flush Box 12 module complete all as specified and as directed.

S&F Angle holder (Modular Type), insulated body with back plate for batten fittings complete all as specified and directed.

S&F Ceiling rose, surface bakelite,65 x 50mm, three terminals complete all as specified and directed.

S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and as directed.

S & F Wall/surface mounted type LED light fitting batten type complete with LED lamp 1x 20/22 watt (4 ft), extruded aluminium heat sink provide for efficient heat dissipation and integrate electronic drive complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable complete all as specified and directed. Make :- Philips Cat Part No BN 021C LED 20S PSU CW GR S2 or Wipro Cat Part No LL20-221-XXX-65NE3 or equivalent make of CG as approved.

S & F Wall/surface mounted type LED light fitting batten type complete with LED lamp 1x 10 watt (2 ft), extruded aluminium heat sink provide for efficient heat dissipation and integrate electronic drive complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable complete all as specified and directed. Make :- Philips Cat Part No BN 021 LED 10S 6500 PSU GR S1 or Wipro Cat Part No LL20-111-XXX-65NE3 or equivalent make of CG as approved.

S & F LED Bulk head Fitting including 1x10 watt luminaires pressure die cast housing with IP 66 protection and IK 09 Impact resistance suitable for surface and wall mounting applications complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable complete all as specified and directed. Make :- Philips Cat Part No WT202W LED65 CW PSU S2 PC or Wipro Cat Part No LW07-141-XXX-57-XX or equivalent make of CG as approved.

S & F Ceiling mounted type LED light fitting high performance low height LED downlighter, Robust PDC housing, narrow rim renders complete with LED lamp 1x 20 Watt, extruded aluminium heat sink provide for efficient heat dissipation and integrate electronic drive complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable complete all as specified and directed. Make :- Philips Cat Part No DN295B LED6S-4000 PSU WH or Wipro Cat Part No LD90-231-XXX-65-XX or equivalent make of CG as approved.

S&F LED light fitting 36 Watt, status High lumen output cast aluminium alloy toughned glass, IP65/66 and wired with all accessories complete with GI bracket made out of suitable size GI pipe for fixing bldg security light and making connection by using three core flexible twisted copper wire of 23/0.0076 etc complete all as specified and directed. Make :-Philips Cat Part No BRP 409 LED CW 036 MR FG S1 PSU GR or Wipro Cat Part No LR02-501-XXX-57-XX or equivalent make of CG as approved.

S&F LED Retrofit Lamp 7 Watt complete all as specified and directed. Make :- C&S Cat No Chandra 7W/W or equivalent of Philips/Wipro/CG.

S&F LED Retrofit Lamp 9 Watt complete all as specified and directed. Make :- C&S Cat No Chandra 9W/W or equivalent of Philips/Wipro/CG.

S&F LED Retrofit Lamp 12 Watt complete all as specified and directed. Make :- C&S Cat No Chandra 12W/W or equivalent of Philips/Wipro/CG.

S&F for Exhaust Fan of 300 mm sweep metalic body (Heavy duty) single phase 230/240 volts, AC, 900 RPM complete and making holes with lovoured shutters including mounting frame and connecting the fan to ceiling rose including provision of three core flexible copper conductor cable of size 1.5 sqmm copper including to inside out surface & white wash etc with not less than 0.5mtr long to connection complete including taking down old U/S Exhaust fan complete all as specified and directed. Make :- Orient Model No - Orient 300mm or 12" H.D EX Fan/ Equivalent of Usha, Almonard. Note :- Unserviceable Exhaust Fan will be deposited in MES Store yard.

S&F for flush mounting, factory made Ekinoxe SPN DB's Double door, IP-43 protection, IK-09 with metal door ,with neutral bar , Earth bar and cables ties for cable management fully insulated bus bar 8 way complete all as specified and directed.

S & F for flush mounting, factory made V TPN DBs-DPX-160 MCCB DB's, IP-43 protection-IK09 with metal door with 160 Amps copper busbar with 2 neutral busbar, earth bar cables ties for cable management fully insulated busbar with set of wires and door earthing for provision of DPX 160 MCCB as incomer and 12 No. MCB's, SP, as outgoing etc complete all as specified and directed. Make :- ABB Cat Part No E-SVTDB M 4XT1, Module - Tmax XT1+12, 4 Way, Siemens - Cat Part No 8GB31571RC IP42, 4 Way or Legrand Cat part No. 5077 45 DPX³ 160+12, 4 Way

S&F MCCB 125 Amp, 415 volts, 4 pole, thermal magnetic release for line protection etc complete all as specified and directed. Make :- ABB Cat Part No Tmax XT1 160 MCCB 125A 1SDA066888R1, Siemens - Cat Part No 3VT1 4 Pole 3VT1712-2EA46-0AA0 (Fixed over load and fixed short circuit setting) or Legrand Cat Part No DPX³ 160 16 KA MCCB 125A 4P 4200 16

S&F MCB SPN (single pole and neutral), 240 volts, 63 Amps breaking capacity 10KA, ‘C’ Series. etc complete all as specified and directed.

S&F MCB SP (single pole) 240 volts, 6 to 32 Amps, 50HZ, 10 KA. , ‘C’ series complete all as specified and directed.

S&F Blanking plate complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground (earth pit not less than2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to earth lead wire of GI wire 4mm dia by means of nuts/bolts and washers, check nuts of galvanized iron or steel including 15mm dia GI pipe light grade upto 1.5 mtr below GL for protection pipe, excavation and earth work charcoal dust, common salt, PCC 1:3:6 type C-1 chamber with cover and RCC 1:2:4 type B-1 using 20mm graded stone aggregate reinforced with 6mm dia round bars @ 75mm c/c both way with MS handle 12mm dia PGI funnel and wire mesh all as shown in electrical plate No 5 of SSR Part-I connected to ear thing test point all as specified or indicated including testing on completion all as directed by Engr-in-Charge.

S&F Modular Cooked Hood Chimney, including PVC/ flexible pipes for exhaust, clamps, bends/ covers etc complete all as required working accessories, Electrical driven 230 Volts, 50 Hz, Single phase with stainless steel finish and curved with tempered glass alongwith soft push controls, heavy duty baffles filter, front black glass panel and LED lights with Air flow of 1080 m ³ per hr, 150mm air outlet dia, with minimum noise level of 59 dBA (Max) complete with all accessories and fittings required for completion as working unit complete all as specified and directed. Make :- KAFF Part No FIM BF MX 60 SS or equivalent of Sun flame, ELICA, Inalsa. Note :- The complete job includes wall cutting etc making arrangement for outgoing exhaust, make good after doing the complete in the existing location as directed by the Engr-in-charge.

SA construction co.

M/s J P Bhatia

yash enterprises

Umesh Talwar