Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.4 LAccepted-AOC | ₹19.4 L Quoted ₹19.9 L | L1 | Accepted-AOC After deduction of Sch of Credit Rs. 44,540.00 |
| 2 | L2₹23.9 L+₹4.0 L (20.3%)Rejected-Finance | ₹23.9 L+₹4.0 L (20.3%) | L2 | Rejected-Finance Other than lowest |
| Sl No | Description | Qty | Unit | kumaon and hills strument engnering services L1 | M/s Rana Enterprises L2 |
|---|---|---|---|---|---|
| 1.00 | Dewatering and pumping out of existing accumulated sludge from Bar sreen chamber at STP by using external sewage disposal pump set to near by sewage disposal drain and cleaning of tank by scrapping with wire brush or any other means on walls and bottom of tank and removing the sludge/ slits/ sand/fungus etc deposited inside the sumps/ tanks with buckets and depositing where directed followed by cleaning with bleaching water solution and fresh water and finally applying one coat of white wash on internal and external surfaces including writing "Tank Cleaned (date) and due date with 10 Cm size white colour letter" on Black back ground on external walls complete all as specified and directed.
Note :- (i) Contractor is to arrange own diesel pump T&P etc for cleaning purpose and minor spares and cunsumable like small screws washers cleaning agents consumable etc is deemed to be included in the quoted rate deemed to be including all safety precaution to be taken while working in STP.
(ii) The accumulated/ deposit sludge after drying shall be disposed off out side the defence land to a distance exceeding 1.5KM and not exceeding 5.00 KM from the STP cost of which shall be deemed to inclusive in the quoted rate and nothing extra shall be paid on this account. | 4 | Each Job | 3,000 ₹12,000 Lowest | 3,500 ₹14,000 |
| 2.00 | Dewatering and pumping out of existing accumulated sludge from Equalization tank at STP by using external sewage disposal pump set to near by sewage disposal drain and cleaning of tank by scrapping with wire brush or any other means on walls and bottom of tank and removing the sludge/ slits/ sand/fungus etc deposited inside the sumps/ tanks with buckets and depositing where directed followed by cleaning with bleaching water solution and fresh water and finally applying one coat of whitewash on internal and external surfaces including writing "Tank Cleaned (date) and due date with 10 Cm size white colour letter" on Black back ground on external walls complete all as specifoed and direted.
Note :- (i) Contractor is to arrange own diesel pump T&P etc for cleaning purpose and minor spares and cunsumable like small screws washers cleaning agents consumable etc is deemed to be included quoted rate including all safety precaution to be taken while working in STP.
(ii) The accumulated/ deposit sludge after drying shall be disposed off out side the defence land to a distance exceeding 1.5KM and not exceeding 5.00 KM from the STP cost of which shall be deemed to inclusive in the quoted rate and nothing extra shall be paid on this account. | 4 | Each Job | 5,000 ₹20,000 | 4,400 ₹17,600 Lowest |
| 3.00 | Dewatering and pumping out of existing accumulated sludge from MBBR tank at STP by using External Sewage disposal drain and cleaning of tank by scrapping with wire brush or any other means on walls and bottom of tank and removing the sludge/ slits/ sand/fungus etc deposited inside the sumps/ tanks with buckets and depositing where directed followed by cleaning with bleaching water solution and fresh water and finally applying one coat of white wash on internal and external surfaces including writing "Tank Cleaned (date) and due date with 10 Cm size white colour letter" on Black back ground on external walls complete all as specifoed and direted.
Note :- (i) Before commenwashent of work necessary arangement for bypassing the raw sewage to disposal and work to be carried out in fast pace by developing more man power at STP in Order to complete the work at the earliest.
(ii) Contractor is to arrange own diesel pump T&P etc for cleaning purpose and minor spares and consumable like small screws washers cleaning agents consumable etc is deemed to be included quoted rate deemed to be including all safety precaution to be taken while working in STP.
(iii) Removing of media and keeping a side for refuse or disposal as directed deemed to be included in the rate quoted. | 4 | Each Job | 4,000 ₹16,000 Lowest | 4,400 ₹17,600 |
| 4.00 | M&L for cleaning of STP area by means of removing debris cutting of grass /bushes and disposed off up to a distance not more than 50 mtr from starting point all as per directed. | 600 | Sqm | 20 ₹12,000 Lowest | 40 ₹24,000 |
| 5.00 | Dewatering and pumping out of existing accumulated sewage from FAB tank at STP manually or using external sewage disposal pump sets to near by sewage disposal drain and cleaning of tank by scrapping with wire brush or any other means of on walls and bottom of tank and removing the sludge/ slits/ sand/fungus etc deposited inside the sumps/ tanks with buckets and depositing where directed followed by cleaning with bleaching water solution and fresh water and finally applying one coat of white wash on internal and external surfaces including writing "Tank Cleaned date and due date with 10 Cm size white colour letter" on Black back ground on external walls complete all as specifoed and direted.
Note :- (i) Contractor is to arrange own diesel pump T&P etc for cleaning purpose and minor spares and consumable like small screws washers cleaning agents consumable etc is deemed to be included quoted rate deemed to be including all safety precaution to be taken while working in STP.
(ii) The accumulated/ deposied sludge after drying shall be disposed off out side the defence land to a distance exceeding 1.5KM and not exceeding 5.00 KM from the STP cost of which shall be deemed to inclusive in the quoted rate and nothing extra shall be paid on this account. | 4 | Job | 5,000 ₹20,000 | 4,500 ₹18,000 Lowest |
| 6.00 | Dewatering and pumping out of existing accumulated sewage from Tube settler by manualy or using external sewage disposal pump sets to near by sewage disposal drain and cleaning of tank by scrapping with wire brush or any other means of on walls and bottom of tank and removing the sludge/ slits/ sand/fungus etc deposited inside the sumps/ tanks by cleaning with bleaching water solution and fresh water and finally applying one coat of white wash on internal and external surfaces including writing "Tank Cleaned date and due date with 10 Cm size white colour letter" on Black back ground on external walls complete all as specifoed and direted.
Note :- (i) Removing and disposal of old tube deck media.
(ii) The disposal of accumulated/ deposited sludge after drying out side the defence land to a exceeding 1.5KM and not exceding 5.00 KM from the STP .
(iii) Before commenwashent of work necessary arangement for disposal of sewage/ sludge be made and work to be caried out in fast pace by developing more man power at STP in Order to complete the work in ax 02 days.
(iv) Refixing of old serviceable deck media
(v) Cutting and rewelding of supporting MS frame structure ( Supporting MS frame for tube settler)
(vi) replawashent of unsv rusted portion of supporting MS frame structure Cost of MS frame will be paid seprately. | 4 | Job | 5,000 ₹20,000 | 4,500 ₹18,000 Lowest |
| 7.00 | Dewatering and pumping out of existing accumulated sewage from Chlolrine Contact Tank STP by manually or using Extrnal sewage disposal pump sets to near by sewage disposal drain and cleaning of tank by scrapping with wire brush or any other means of on walls and bottom of tank and removing the sludge/ slits/ sand/fungus etc deposited inside the sumps/ tanks with buckets and depositing where directed followed by cleaning with bleaching water solution and fresh water and finally applying one coat of snow cem on internal and external surfaces including "Tank Cleaned date and due date with 10 Cm size white colour letter" on Black back ground on external walls complete all as specifoed and direted.
Note :- (i) The accumulated/ deposied sludge after drying shall be disposed off out side the defence land to a distance excceding 1.5KM and not exceding 5.00 KM from the STP cost of which shall be deemed to enclusive in the quoted rate and nothing extra shall be paid on this account.
(ii) Contractor is to arrange own diesel pump T&P etc for cleaning purpose and minor spares and consumable like small screws washers cleaning agents consumable etc is deemed to be included in the cost the unit rate quoted deemed to be include all safety precaution to be taken while working in STP. | 4 | Job | 5,000 ₹20,000 | 4,500 ₹18,000 Lowest |
| 8.00 | Dewatering and pumping out of existing accumulated sludge and water from sewage treated Tank by using external sewage disposal pump set to near by sewage disposal drain and cleaning of tank by scrapping with wire brush or any other means of on walls and bottom of tank and removing the sludge/ slits/ sand/fungus etc deposited inside the sumps/ tanks with buckets and depositing where directed followed by cleaning with bleaching water solution and fresh water and finally applying one coat of white wash on internal and external surfaces including writing "Tank Cleaned date and due date with 10 Cm size white colour letter" on Black back ground on external walls complete all as specifoed and direted.
Note :- (i) The accumulated/ deposied sludge after drying shall be disposed off out side the defence land to a distance exceeding 1.5KM and not exceeding 5.00 KM from the STP cost of which shall be deemed to inclusive in the quoted rate and nothing extra shall be paid on this account.
(ii) Before commenwashent of work necessary arangement for disposal of sewage/ sludge be made and work to be caried out in fast pace by developing more man power at STP in Order to complete the work in max 02 days
(iii) Contractor is to arrange own diesel pump T&P etc for cleaning purpose and minor spares and consumable like small screws washers cleaning agents consumable etc is deemed to be included quoted rate deemed to be including all safety precaution to be taken while working in STP. | 4 | Job | 5,000 ₹20,000 | 4,500 ₹18,000 Lowest |
| 9.00 | M&L for cleaning/ rodding of choked pipe line of size 80/100/150 mm by manually or mechanical sucking rodding including cutting trading welding of pipe lines and testing for no leakage/ functionablity all as directed by engr-in-charge. | 20 | RM | 200 ₹4,000 Lowest | 800 ₹16,000 |
| 10.00 | Removing of Air blower (Twin lobe air cooled compressor coupled with electric motor) installed for sewage collection tank of any make and capacity 18.5KW/25 HP from its installed position by disconnecting suction and delivery silencer air delivery pipe disconnecting electric cables earth strips and dismounting the compressor and motor from base channel and transporting to manufacturer workshop for overhauling of compressor by opening the compressor replacing the worn out/ defective spare parts making good of shaft and shaft sleeve internally lubricating the rotating parts reassembling the compressor duly replacing with new packing material 'O' rings worn out bolts nuts washers belt belt guard etc and transporting back and reinstalling in its original position checking alingment reconnecting the suction and delivery silencer air delivery pipe and electric connections testing on completion for satisfactory performance complete all as directed. | 4 | Each job | 3,000 ₹12,000 Lowest | 8,000 ₹32,000 |
Tender Value
₹25.0 L
EMD Value
₹51,000
Closing Date
18 Oct 2025, 6:00 pmClosed
CWE (HILLS) PITHORAGARH
HQ CWE (HILLS) PITHORAGARH POST OFFICE - BHARKATIA DISTRICT - PITHORAGARH STATE - UTTARAKHAND PIN 262520
CA NO. CWE/HILLS/PGH/87 OF 2025-2026 REPAIR/MAINTENANCE OF SEWAGE TREATMENT PLANTS AND ALLIED INFRASTRUCTURE AT MIL STN PITHORAGARH
2025_MES_731090_1
89275/25-26/E8
Open Tender
Civil Works
Item Rate
180 days
PITHORAGARH
Class - D
8 documents required · 8 mandatory
₹500
GE (MES) PITHORAGARH
₹51,000
Yes
3 Dec 2025
15 Sept 2025
25 Oct 2025
15 Sept 2025
18 Oct 2025
29 Sept 2025
Amount
Dewatering and pumping out of existing accumulated sludge from Bar sreen chamber at STP by using external sewage disposal pump set to near by sewage disposal drain and cleaning of tank by scrapping with wire brush or any other means on walls and bottom of tank and removing the sludge/ slits/ sand/fungus etc deposited inside the sumps/ tanks with buckets and depositing where directed followed by cleaning with bleaching water solution and fresh water and finally applying one coat of white wash on internal and external surfaces including writing "Tank Cleaned (date) and due date with 10 Cm size white colour letter" on Black back ground on external walls complete all as specified and directed. Note :- (i) Contractor is to arrange own diesel pump T&P etc for cleaning purpose and minor spares and cunsumable like small screws washers cleaning agents consumable etc is deemed to be included in the quoted rate deemed to be including all safety precaution to be taken while working in STP. (ii) The accumulated/ deposit sludge after drying shall be disposed off out side the defence land to a distance exceeding 1.5KM and not exceeding 5.00 KM from the STP cost of which shall be deemed to inclusive in the quoted rate and nothing extra shall be paid on this account.
Dewatering and pumping out of existing accumulated sludge from Equalization tank at STP by using external sewage disposal pump set to near by sewage disposal drain and cleaning of tank by scrapping with wire brush or any other means on walls and bottom of tank and removing the sludge/ slits/ sand/fungus etc deposited inside the sumps/ tanks with buckets and depositing where directed followed by cleaning with bleaching water solution and fresh water and finally applying one coat of whitewash on internal and external surfaces including writing "Tank Cleaned (date) and due date with 10 Cm size white colour letter" on Black back ground on external walls complete all as specifoed and direted. Note :- (i) Contractor is to arrange own diesel pump T&P etc for cleaning purpose and minor spares and cunsumable like small screws washers cleaning agents consumable etc is deemed to be included quoted rate including all safety precaution to be taken while working in STP. (ii) The accumulated/ deposit sludge after drying shall be disposed off out side the defence land to a distance exceeding 1.5KM and not exceeding 5.00 KM from the STP cost of which shall be deemed to inclusive in the quoted rate and nothing extra shall be paid on this account.
Dewatering and pumping out of existing accumulated sludge from MBBR tank at STP by using External Sewage disposal drain and cleaning of tank by scrapping with wire brush or any other means on walls and bottom of tank and removing the sludge/ slits/ sand/fungus etc deposited inside the sumps/ tanks with buckets and depositing where directed followed by cleaning with bleaching water solution and fresh water and finally applying one coat of white wash on internal and external surfaces including writing "Tank Cleaned (date) and due date with 10 Cm size white colour letter" on Black back ground on external walls complete all as specifoed and direted. Note :- (i) Before commenwashent of work necessary arangement for bypassing the raw sewage to disposal and work to be carried out in fast pace by developing more man power at STP in Order to complete the work at the earliest. (ii) Contractor is to arrange own diesel pump T&P etc for cleaning purpose and minor spares and consumable like small screws washers cleaning agents consumable etc is deemed to be included quoted rate deemed to be including all safety precaution to be taken while working in STP. (iii) Removing of media and keeping a side for refuse or disposal as directed deemed to be included in the rate quoted.
M&L for cleaning of STP area by means of removing debris cutting of grass /bushes and disposed off up to a distance not more than 50 mtr from starting point all as per directed.
Dewatering and pumping out of existing accumulated sewage from FAB tank at STP manually or using external sewage disposal pump sets to near by sewage disposal drain and cleaning of tank by scrapping with wire brush or any other means of on walls and bottom of tank and removing the sludge/ slits/ sand/fungus etc deposited inside the sumps/ tanks with buckets and depositing where directed followed by cleaning with bleaching water solution and fresh water and finally applying one coat of white wash on internal and external surfaces including writing "Tank Cleaned date and due date with 10 Cm size white colour letter" on Black back ground on external walls complete all as specifoed and direted. Note :- (i) Contractor is to arrange own diesel pump T&P etc for cleaning purpose and minor spares and consumable like small screws washers cleaning agents consumable etc is deemed to be included quoted rate deemed to be including all safety precaution to be taken while working in STP. (ii) The accumulated/ deposied sludge after drying shall be disposed off out side the defence land to a distance exceeding 1.5KM and not exceeding 5.00 KM from the STP cost of which shall be deemed to inclusive in the quoted rate and nothing extra shall be paid on this account.
Dewatering and pumping out of existing accumulated sewage from Tube settler by manualy or using external sewage disposal pump sets to near by sewage disposal drain and cleaning of tank by scrapping with wire brush or any other means of on walls and bottom of tank and removing the sludge/ slits/ sand/fungus etc deposited inside the sumps/ tanks by cleaning with bleaching water solution and fresh water and finally applying one coat of white wash on internal and external surfaces including writing "Tank Cleaned date and due date with 10 Cm size white colour letter" on Black back ground on external walls complete all as specifoed and direted. Note :- (i) Removing and disposal of old tube deck media. (ii) The disposal of accumulated/ deposited sludge after drying out side the defence land to a exceeding 1.5KM and not exceding 5.00 KM from the STP . (iii) Before commenwashent of work necessary arangement for disposal of sewage/ sludge be made and work to be caried out in fast pace by developing more man power at STP in Order to complete the work in ax 02 days. (iv) Refixing of old serviceable deck media (v) Cutting and rewelding of supporting MS frame structure ( Supporting MS frame for tube settler) (vi) replawashent of unsv rusted portion of supporting MS frame structure Cost of MS frame will be paid seprately.
Dewatering and pumping out of existing accumulated sewage from Chlolrine Contact Tank STP by manually or using Extrnal sewage disposal pump sets to near by sewage disposal drain and cleaning of tank by scrapping with wire brush or any other means of on walls and bottom of tank and removing the sludge/ slits/ sand/fungus etc deposited inside the sumps/ tanks with buckets and depositing where directed followed by cleaning with bleaching water solution and fresh water and finally applying one coat of snow cem on internal and external surfaces including "Tank Cleaned date and due date with 10 Cm size white colour letter" on Black back ground on external walls complete all as specifoed and direted. Note :- (i) The accumulated/ deposied sludge after drying shall be disposed off out side the defence land to a distance excceding 1.5KM and not exceding 5.00 KM from the STP cost of which shall be deemed to enclusive in the quoted rate and nothing extra shall be paid on this account. (ii) Contractor is to arrange own diesel pump T&P etc for cleaning purpose and minor spares and consumable like small screws washers cleaning agents consumable etc is deemed to be included in the cost the unit rate quoted deemed to be include all safety precaution to be taken while working in STP.
Dewatering and pumping out of existing accumulated sludge and water from sewage treated Tank by using external sewage disposal pump set to near by sewage disposal drain and cleaning of tank by scrapping with wire brush or any other means of on walls and bottom of tank and removing the sludge/ slits/ sand/fungus etc deposited inside the sumps/ tanks with buckets and depositing where directed followed by cleaning with bleaching water solution and fresh water and finally applying one coat of white wash on internal and external surfaces including writing "Tank Cleaned date and due date with 10 Cm size white colour letter" on Black back ground on external walls complete all as specifoed and direted. Note :- (i) The accumulated/ deposied sludge after drying shall be disposed off out side the defence land to a distance exceeding 1.5KM and not exceeding 5.00 KM from the STP cost of which shall be deemed to inclusive in the quoted rate and nothing extra shall be paid on this account. (ii) Before commenwashent of work necessary arangement for disposal of sewage/ sludge be made and work to be caried out in fast pace by developing more man power at STP in Order to complete the work in max 02 days (iii) Contractor is to arrange own diesel pump T&P etc for cleaning purpose and minor spares and consumable like small screws washers cleaning agents consumable etc is deemed to be included quoted rate deemed to be including all safety precaution to be taken while working in STP.
M&L for cleaning/ rodding of choked pipe line of size 80/100/150 mm by manually or mechanical sucking rodding including cutting trading welding of pipe lines and testing for no leakage/ functionablity all as directed by engr-in-charge.
Removing of Air blower (Twin lobe air cooled compressor coupled with electric motor) installed for sewage collection tank of any make and capacity 18.5KW/25 HP from its installed position by disconnecting suction and delivery silencer air delivery pipe disconnecting electric cables earth strips and dismounting the compressor and motor from base channel and transporting to manufacturer workshop for overhauling of compressor by opening the compressor replacing the worn out/ defective spare parts making good of shaft and shaft sleeve internally lubricating the rotating parts reassembling the compressor duly replacing with new packing material 'O' rings worn out bolts nuts washers belt belt guard etc and transporting back and reinstalling in its original position checking alingment reconnecting the suction and delivery silencer air delivery pipe and electric connections testing on completion for satisfactory performance complete all as directed.
M&L for removing the Submersible pump set from existing position transporting to authorised workshop for repair work dismantle/ open removing the burnt winding wire cleaning of rotor/ stator rewinding the motor with 'F' class insulation super enameled copper wire of size equivalent to the orignal winding insulated packing materials varshning drying incl replacement of both water seal compound both bearing fill with new etc reassambling the pump set installing back to the orignal position testing and comissioning on full load for 4 Hrs continous running for the motor capacity upto 5.0HP/7.5KW complete all as specified and directed.
Supply & Fixing in replacement of existing UNSV non clog impeller suitable for and upto 5.0 /7.5 HP submersible pump set complete all as specified and directed.
Supply & Fixing in replacement of existing UNSV upper/ lower or back to back ball bearing suitable for upto 5.0 /7.5 HP non clog submersible punp set complete all as specified and directed.
Supply & fixing in replacement of existing UNSV stainless bush suitable for and upto 5.0/7.5 HP non clog submersible pump set complete all as specified and directed.
Supply & Fixing in replacement of existing UNSV gun metal neck ring suitable for and upto 5.0/ 7.5 HP non clog submersible pump set complete all as specified and directed.
M&L for dismantling and removing the mono Block/ Coupled pump set of air compressor from existing position shifting to authorized workshop for the repair work removig the burnt winding cleaning rotor/ stator re-winding the motor with super enameled copper wire of size equivalent to the orignal winding incl isulate packing materils varnishing drying etc installed back to the orignal position testing and commisoning on full load for 4 Hrs continous running for the capacity of motor upto 7.5 HP complete all as specified and directed.
M&L for dismantling and removing the mono Block/ Coupled pump set from the existing position after disconnecting the inlet/ outlet pipe connections disconnecting the electric supply cables and transporting to repair work shop complete opening the pump side servicing the pump set including cleaning the shaft including replacement of worn out bearing bushes check nut shaft sleeves etc and installed back to the orignal position testing and commisoning on full load for 4 Hrs continous running for the capacity of pump upto 7.5 HP complete all as specified and directed.
Supply and fixing in replacement of existing UNSV ball bearing of suitable size for and upto 7.5 HP mono block/ coupled pump set complete all as per sopecified and directed.
Supply and fixing in replacement of existing UNSV of roller bearing of suitable size for and upto 7.5 HP mono block/ coupled pump set complete all as per sopecified and directed.
Supply and fixing in replacement of existing brass bush of suitable size for and upto 7.5 HP mono block/ coupled pump set complete all as per sopecified and directed.
M&L in replacement of existing Air release valve suitable size fo mono block/ coupled pump set made out of brass as per site complete all as per specified and directed.
Supply and fix in replacement of existing fan belts for compressor complete all as specified and directed.
Supply and mixing bacteria culture in PVC Shells suitable for MBBR type plant complete all as specified.
M&L in replacement of exsting chemical dosing pump capacity 12 LPH operated on single phase 230V Hz power supply high pressure single head gear motored adjustable with self priming suitable for interchangable pump tubes and sub assemblies mechanical control adjustible from 5% to 100% with non clogging capacity punping against pressure upto 2kg/cm2 mounting vertical or horizontal complete with 100 ltr PE/FRP tank with lid level gauge and rain shed cowl etc including taking out old unsv pump complete all as specified and directed. Note:- Cost for dismantling of old chemical dosing pump and depositing into MES store yard is inclusive.
M&L for opening of all the inspection door of existing dual Media filter of size 4.0m x 6.0m taking out/ removing the existing totally impregnated/ out lived internal filling filter media layer wise without any mixing of each other layer cleaning the entire filter thoroughly and painting with two coat of epoxy based anti corrosion paint internally and two coat of synthetic enamel paint externally and segregating of filter media received from DMF/ ACF opening of header strainer pipe SS wire mesh of filtration of waste water received from chlorine contact tank (sewage treatment plant) cleaning of strainer pipe and including replacement of worn out pipe of same size and replacing/ refixing of cleaned filter media in layer and setting back the filter media in layer and setting back the filters for its proper function and testing complete all as specified and directed.
Supply and fixed in replacement of exsting (non return valve ISI - 5312) CI of following sizes bore pipe heavy duty both end flanged of pressure rating PN 1.6 and 150 NB size jointing with joint rubber or fibre board gasket complete with and including required nos size of nuts bolts and washers complete all as specified and directed by Engr-in-Charge.
Supply and fix in replacement of exsting CI Sluice valve PN 1.6 type without lugs suitable for clamping between flanges fittings gasket nuts bolts washers etc valve of size 150 mm description complete all as specified and directed.
Supply and fix in replacement exsting of CI butterfly valve of following size as per IS 13095 PN 1.6 without lugs suitable for clamping between flanges fittings gasket nuts bolts washers etc including taking up/ down of existing unserviceable butterfly valve of any description complete all as specified and directed. for following size :-
S& F in MS pipe plain end as per IS:1239 (I) nominal bore with following dia heavy grade with all fittings like elbow tee reducer flange nut bolt with washer including cutting welding and joining etc
S& F in replacement for exsting HDPE pipe of pressure rating 6 Kgf/Sqcm incl all fittings in any lengths with fusion joint laid in trenches all as per directed of size 100 mm bore complete all as specifeid and directed.
All as per Item No 38 above but 80mm dia
All as per Item No 38 above but 50mm dia
All as per Item No 38 above but 40mm dia
All as per Item No 38 above but 32mm dia
M&L for preparing the surface by scrapping the old painting and removing the grease oil dirt algae etc Painting of outer surfaces of MS pipes with one coat black Japan paint over a coat of Zync Chromate complete incl its MS supports/ Clamps/ Nuts/ bolts and marking / writing flow arrows and name with white paint by skilled painter All as per directed of size 300 mm dia complete all as specified and directed.
All as per Sl item No.43 here-in-before but 150mm dia
All as per Sl item No. 43 here-in-before but 100mm dia
All as per Sl item No. 43 here-in-before but 80mm dia
All as per Sl item No. 43 here-in-before but50mm dia
All as per Sl item No. 43 here-in-before but 40mm dia
S&F in replacemnt of MCCB 4 Pole 100 A breaking capacity 25 KA 415V ISI marked complete all as specified and directed.
S&F in in replacement of exsting MCCB 4 pole 200A breaking capacity 36 KA 415V ISI marked complete all as specified and directed.
S & F in replacement of exsting PVC insulated FRLS unsheathered stranded copper conductor cable of 3 core 4 Sqmm EC grade for connection of submersible pump to starter complete all as specified and directed.
S&F in replacement of motor protection circuit braker 3 pole 415 V 25 Amps with over load relay range 16 to 32 Amps
S&F in replacement of single phase preventer suitable for motor protection complete all as specified and directed.
S&F in replacement of 3 Phase contactor 10 Amp 415 V with 230 V coil complete all as specified and directed.
S&F in replacement of 3 Phase contactor 16 Amp 415 V with 230 V coil complete all as specified and directed.
S&F in replacement of 3 Phase contactor 25 Amp 415 V with 230 V coil complete all as specified and directed.
S&F in replacement of 3 Phase MNX contactor 40 Amp 415 V complete all as specified and directed.
S&F in replacement of NO-NC auxillary contact block suitable for 10 to 25 A 3 Phase contactors complete all as specified and directed.
S&F in replacement of NO-NC auxillary contact block suitable for 32 to 60 A 3 Phase contactors complete all as specified and directed.
S&F inreplacement of No volt coil 230V suitable for 3 Phase 415V contractors complete all as specified and directed.
S&F in replacement of No volt coil 110V suitable for 3 Phase 415V contractors complete all as specified and directed.
S&F in replacement of DOL starter suitable for 5.0/ 7.5HP motor 3 Phase 415 V with preventer and thermal relays complete all as specified and directed.
S&F inreplacement of exsting fully automatic star delta motor starter suitable for 25 HP pumpset 3 phase 415V with relay range of 45 to 75 Amps incl enclosure and complete all as per specfied and directed.
S&F in replacement of pressure gauge 100 mm dia 0-14Kg/cm3 pressure rating complete all as specified and directed.
Supply and mixing of Activated carbon ID 800 for Color, smells & Excess chemical complete all as specified and directed.
Supply & Mixing poly aluminium Electrolite (PE) Max Flow A-107 for STP all as specified and directed.
Supply & Mixing of Sodium hypochlorite for STP all as specified and directed.
Supply & Mixing of poly aluminium Chloride(PAC) for STP all as specified and directed.
Dismantling old Panel and Supply & Fixing Automatic star delta starter( 01W+ 01S) panel factory made , floor mounted, made of CRCA sheet powder caoted 2.0 mm, detachable type fixed with nuts and bolt and front door fixed with hinges and knobs, suitable for 3 phase 415 volts, 50Hz AC , Aluminum Bus bar Capacity 4p 600 Amp complete as as specified and directed comprising of the following :- INCOMING (a) MCCB 400Amp 50 KA TP 415 V , 50 HZ thermally adjustable between 80-100% with spreader and rotary handle - 01No (b) 3 phase Voltmeter -01 Nos (c) 3 Phase ampmeter-01 Nos (d) CT 400/5A-1 set (e) RYB indicator-01 set (f) MCB 6 A SP-03 Nos OUTGOING (a) 75 HP star Delta timer -02 Nos (b) MCCB 200 A 3 pole 50KA breaking capacity Icu at 415 V, AC 50Hz with Spreader & direct Rotary handle -02 Nos (c ) MNX 70 Contactor with Add- on block-– 02Nos (d) MNX 95 Contactor- 04 Nos (e) Thermal overload relay MN 12 (CT Operated ) 42-69 A-02 Nos (f) Aouto manual slector Switch -02 Nos (g) ON/ OFf Indicator -04 Nos (h) 6A, SP, MCB-08 Nos (j) Single phase preventer -02 Nos (k) Star Delta Timer -02 nos Note :- Cost of dismantling of old panel and depositing into MES store yard is inclusive.
Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5 M. deep for foundation or for laying of pipes etc and getting out in soft/loose soil, comlete all as specified and directed
Returning filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm in soft/loose soil, complete all as specified and directed.
Removing excavated soil to a distance exceeding 50m but not exceeding 250 m and depositing where directed at a level not exceeding 1.5 m above the starting point , complete all as specified and directed.
Disconnecting and taking up or down MS pipe and connections for 40 mm dia bore size complete all as specified and directed.
All as per Item No 75 above but size 50 mm dia bore
All as per Item No 75 above but size 80 mm dia bore
All as per Item No 75 above but size 100 mm dia bore
All as per Item No 75 above but size 150 mm dia bore
Testing of STP water sample of STP ARO & Kashni Physical/ Chemical/ Metal bacterial test. i.e. PH Value, Total suspended solids, Oil & Grease, BOD/COD Faecal coliform
M/s Rana Enterprises (BID ID -3451228)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.15 MB
PS87.pdf
Tender Documents • 1.27 MB
BOQ_818489.xls
BOQ • 0.34 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .