Renovation to Sump Panel & Compound Light at Govt. Engineering College, Sector-28, Gandhinagar.

Name of Work Renovation to Sump Panel & Compound Light at Govt. Engineering College, Sector-28, Gandhinagar.

Fund Head : Deposited Work

Sr. No. Item No. Particulars. Qty. Rate Amount

Signature of Contractor Deputy executive Engineer

C.P Electrical R & B Sub Dn

Name Of Work :- Renovation to Sump Panel & Compound Light at Govt. Engineering College, Sector-28,

Item Estimated Rate in Rs.

Item Description Unit Amount in Rs.

No. Quantity in Figure In Word

Replacing old and u/s by Supplying and erecting Flexible

PVC insulated multi strand multi core 1.1 kv grade ISI Rupees Forty Six

1 150 mtrs marked copper wires of following size to be erected as 46.46 And Paise Forty mtr

directed. Six Only

(e) 1.50 Sq.mm 3 core round PVC sheathed

(k) 4.00Sq.mm 4 core round PVC sheathed

150 mtrs 176.75 Seventy Six And mtr

Providing and erecting Mains with ISI marked, 1.5KV

grade electrolyte multi stranded, annealed copper

conductor with heat resistant PVC insulated conforms to

IS 694, IEC - 227 erected in existing pipe of following size

(Specifically for control panel, relays, power switchgears,

motor starters & control wiring) with required size of

copper lugs, nuts and bolts if required.

(f) One wire 10.00 sq. mm

47 mtrs 91.91 One And Paise mtr

Ninety One Only

Providing and erecting ISI mark Medium class RIGID PVC

PIPES of following size complete to be erected on/in wall Rupees Twenty

or ceiling erected with necessary PVC fittings & Junction Four And Paise

3 255 mtrs 24.24 mtr

boxes fixed with adhesive solution & Clamps with following Twenty Four

dia of pipes, in approved manner as directed (a)20 mm Only

Replacing old and u/s by Supplying and erecting LED

street light / Flood light fittings with High power White

LEDs wattage of 3 Watt and above assembled on single

MCPCB, efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with smooth

finish powder coated and heat sink extruded aluminium

with diffuser and Polycarbonate optics/ lenses, with

toughened glass with company mark/name engraved or

embossed 160 to 270 V,Power Factor more than 0.95,

THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio

4 4 nos 3,345.12 Hundred Forty Each

>0.45, Luminaire efficacy> 100 lumens/watt . LED driver

efficiency > 85 %.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown ranges

of Wattage capacity of LED fittings.The Engineer incharge

may select any wattage capacity between the ranges

shown.) (A) Street Light (IP-65), Surge protection -4KV

integral and ,Light must have 440VAC line supply with

over-voltage protection. (i) above 36 to 48 watts Cat-lll

Supplying and erecting LED street light / Flood light fittings

with High power White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more than

lm/w and corrosion free High pressure die cast aluminum

housing with smooth finish powder coated and heat sink

extruded aluminium with diffuser and Polycarbonate

optics/ lenses, with toughened glass with company

mark/name engraved or embossed 160 to 270 V,Power

Factor more than 0.95, THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45, Luminaire efficacy>

5 40 nos 7,266.95 Hundred Sixty Each

lumens/watt . LED driver efficiency > 85 %.( fittings

required LM-79 & LM-80 certificates)(NOTE: Below

Ninety Five Only

description have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.) (B) Flood

Light (IP-65), Surge protection -4KV integral and ,Light

must have 440VAC line supply with over-voltage

protection. (iv) above 90 to 120 watts Cat-lll

Replacing old Burntout 63A Metal Clad Switch by New

Providing and erecting Approved make Four pole moulded

case circuit breaker having breaking capacity ICU of 25 Rupees Six

KA. at 415 V,having normal current rating up to 25 A to Thousand One

100A. with Fixed thermal & magnetic release suitable to Hundred

6 5 nos 6,173.12 Each

work on A.C. supply 50 c/s. with all internal connections, Seventy Three

spreader tinned copper & complete erected in existing 16 And Paise

G.M.S. housing. ICS=100% of ICU only Twelve Only

Providing and erecting Approved make Four pole moulded

case circuit breaker having breaking capacity ICU of

KA. at 415 V,having normal current rating up to 25 A to

100A. with Fixed thermal & magnetic release suitable to

work on A.C. supply 50 c/s. with all internal connections, Rupees Six

spreader tinned copper & complete erected in existing 16 Thousand Seven

7 1 nos G.M.S. housing. ICS=100% of ICU only 6,790.43 Hundred Ninety Each

Cat III And Paise Forty

Note:-1 Add Rs. 10% extra for housing/Encloser of MCCB Three Only

for Item No 3-4-1 to 3-4-12 (The Enclosures should be

used of same company of MCCBs to be used)

Replacing old Burntout 125A Metal Clad Switch by New

Providing and erecting Approved make Four pole moulded

case circuit breaker having breaking capacity ICU of

KA. at 415 V. having normal current rating 125A. with

8 1 nos Fixed thermal & magnetic release suitable to work on 8,055.76 Each

A.C.supply 50 c/s. with all internal connections, spreader

Seventy Six Only

tinned copper & complete erected in existing 16 G.M.S.

housing. ICS=100% of ICU only

Replacing old Burntout 200A Metal Clad Switch by New

Providing and erecting Approved make Four pole moulded

case circuit breaker having breaking capacity ICU of

KA. and above at 415 V . having normal current rating

250A. with variable thermal & magnetic release suitable to

9 1 nos 20,946.39 Hundred Forty Each

work on A.C.supply 50 c/s. with all internal connections,

spreader tinned copper & complete erected in existing

Thirty Nine Only

G.M.S. housing. ICS=100% of

ICU only Cat III

Providing and erecting Approved make Earth fault Relay

suitable to mount with inter connection suitable to

following size of moulded case circuit breaker having CT

10 4 nos ratio & MCCB rating as following along with shunt trip 4,687.41 Each

220V AC. with all internal connections & complete erected

Paise Forty One

in existing M.S.housing.. (1) 15 A -100 A , CT Ratio 1/100

1 nos 5,415.62 Hundred Fifteen Each

And Paise Sixty

Supplying & erecting approved make Four Pole 415V

change over switch interior for panel mounting with

operating mechanism A.C.23 duty confirming to IS for

11 3 nos 7,790.13 Hundred Ninety Each

(C)100-125A Cat. III

Supplying and erecting triple pole & neutral 440V / 500V

panel mounting Copper Busbars with four equal Nos. of

electrolyte bus having current density not more than

Amp. / sq.mm (Rated current / cross section area) duly

wrapped with colour insulating tape for phase sequence of

12 3.5 Rn. Mtr. 1,961.42 Hundred Sixty Rn. Mtr.

following current carrying capacity, erected with necessary

bus bar supports /insulators, main cable socket to each

bar, erected in existing cubical panel with necessary

connections. (A) Suitable for 100 Amp. Capacity

(C) Suitable for 300 Amp. capacity Rupees Four

1 Rn. Mtr. 4,909.61 Hundred Nine Rn. Mtr.

And Paise Sixty

Replacing old and u/s by providing and erecting Miniature

circuit breaker single pole 6A to 25A suitable to operate Rupees One

on 240 V A.C. system and having breaking capacity 10 Hundred Twelve

13 10 nos 112.11 Each

KA to be erected in existing box. confirming to IS And Paise

8828/1996 with ISI Mark Cat.III Eleven Only

Replacing old and u/s by Providing & erecting 240 V MCB Rupees Three

double pole switch for motor & inductive load (C Curve) Hundred Thirty

14 5 nos having 10 KA breaking capacity & confirms to IS : 8828 in 330.27 And Paise Each

existing box having following capacity (B) 40 Amp. Twenty Seven

Providing & erecting 415 V MCB Four Pole for Motor & Rupees Five

Inductive Load (C Curve) having 10KA breaking capacity Hundred Ninety

15 12 nos 595.90 Each

& confirms to IS :8828 in existing box having following Five And Paise

capacity (a) 6 to 32 Amp. Cat III Ninety Only

(c)63 Amp. Cat III

14 nos 737.30 Each

Paise Thirty Only

Replacing old and u/s by Sheets steel powder coated

enclosure suitable for incorporating One/Two nos. MCB.

16 5 nos 176.75 Seventy Six And Each

Providing and erecting Sheet Steel powder coated MCB

distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to IS

8623-1 & 3, IEC 61439-1 & 3 without MCB to house

17 12 nos appropriate nos. of MCBs.(The DBs should be used of 355.52 Each

same company of MCB to be used) suitable for (A)

single phase incoming and horizontal single phase

outgoing (a) single door (IP-30) (i)4 way

providing and erecting Approved make RCCBs

conforming to IS: 12640 and having sensitivity of 30 mA

and Short Circuit withstand capacity of 10 KA and suitable

for operation on single phase 240 V,50Hz. having

18 5 nos 2,235.13 Hundred Thirty Each

characteristic of quick action & tripping with all advance

feature & do not incorporate any electronic component. for

following Max. rating erected as directed (ii) 40Amps. DP

Providing and erecting HOT deep Galvanised iron strip

wire 8 to 16 SWG.

Supplying & erecting earth pit of minimum bore

dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-1987

made of corrosion free hot dipped G.I.Pipes having Outer

pipe dia of 50mm having 80-200 Micron galvanising,

Inner pipe dia of 25 mm having 200-250 Micron

galvanising, connection terminal dia of 12mm with

constant ohmic value surrounded by highly conductive

compound with high charge dissipation suitable for

following type of applications with chamber and heavy

duty cover. (A)(approved make OEM has to submit test Rupees Four

certificate including value of earth resistance of installation Thousand Five

20 6 nos duly stamped and signed by agency and officer Incharge 4,591.46 Hundred Ninety Each

has to ensure the value of earthing resistane mentioned in One And Paise

test Certificate) & having back filling compound of (B) Forty Six Only

Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm /

meter testing as per IEC 62561-2017, Voltage drop:- <

volt at no load & dry form, Sulphar content:- <2%(C) Back

fill Compound :- Earthing compound should be capable to

retain moisture for long time Necessary test report must

be submitted by Agency. (a) For Electrical Installation up

to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

Replacing Old Rusted Cup Board By New Providing &

erecting weather proof, dust & vermin proof, floor mounted

front operated outdoor type double door cubical panel

board necessary IP-54 and above protection as per

approval from engineer incharge made from 14 SWG thick

CRC M.S. sheet for outer body & doors, 16 SWG thick

CRC M.S.sheet for internal partitions with necessary

accesories , supporting angles/ flats channel including

cutting, bending, drilling, welding, riveting with internal

partitions & cable alley as per requirements & instruction

of engineer-in-charge with erection of supplied switch

gears, BUSBARS, suitable size of inter connecting PVC

copper wire / copper-aluminium strips, rubber grommets, Rupees Eleven

rib, bakelite control fuses/MCB for measuring Thousand Four

21 7.980 Sq. Mtr. instruments, earth bus & earth bolts, foundation flange - 11,466.53 Hundred Sixty Sq. Mtr.

bolts-base Plates, sufficient nos. of hinged doors, handles Six And Paise

with locking arrangement and rubber gasket,heavy duty Fifty Three Only

end terminal connection,danger notice board,necessary

ventilation,earthing strip complete. The Panel shall be

painted with epoxy powder coating. (The rates excludes

the cost of switchgears, bus bars, inter connecting mains

& Copper Aluminium strips, meters, Fuses etc. The

dimension shall be measured excluding base beams) The

panel shall be supplied with following approved

manufacturers with following size. (A) locally fabricated

panel board (i) with 350 mm depth

Providing , erecting , fabricating the M.S. structure as per

requirement on site incorporating proper size of M.S.

angles,square,round, flats, bars, channels, sections Rupees Seventy

complete with cutting, welding, grinding & finishing duly Seven And

painted with one coat of red oxide with erection on site as Paise Seventy

per direction of engineer in charge with necessary Seven Only

grouting, cementing, plastering & finishing complete.

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured

cable multistrand Aluminium conductor for 1.1 KV. to be

23 10 mtrs laid on wall with necessary clamps or in existing trench / 540.35 mtr

And Paise Thirty

pipe of following size of cables (F) 3 1/2 core 120 Sq.

mm ( 70 Sq. mm 1/2 core)

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured

cable multistrand / Solid Aluminium conductor for 1.1 KV.

24 120 mtrs to be laid on wall with necessary clamps or in existing 140.39 mtr

And Paise Thirty

trench / pipe of following size of cables (C) 4 core 10 Sq.

Replacing old and u/s by Providing and erecting XLPE

(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium

25 180 mtrs conductor for 1.1 KV. to be laid on wall with necessary 153.52 mtr

Three And Paise

clamps or in existing trench / pipe of following size of

cables (A) 4 core 16 Sq. Mm

Making trench in soft soil of suitable width of 90 cm deep

for laying cable or locating the fault all over the run and

26 250 mtrs 55.55 Five And Paise mtr

back filling the same and making the surface as normal

Fifty Five Only

Making trench in Hard Murrum / Tar Road of suitable Rupees Four

width of 90 cm or required depth for laying any size of Hundred Thirty

27 15 mtrs cable or locating the fault all over the run and back filling 432.28 Two And Paise mtr

the same and making the surface as normal ground. Twenty Eight

Drilling the road without breaking the road surface

(Asphalt) for laying of cable for feeding power supply by

28 10 mtrs making up to following size of holes at both ends 492.88 mtr

complete. (A) Up to 100 mm bore dia

Eighty Eight Only

Providing & laying approved make Double walled

corrugated pipes (DWC) of polyethylene(conforming to IS

14930 II )with necessary connecting accessories of same

29 210 mtrs 62.62 Two And Paise mtr

material at required depth in existing trench for laying of

cable. below ground / road surface for enclosing cable

(A)50 mm outer dia

Replacing old and u/s by Providing and, fixing heavy duty

flange type brass cable gland with rubber ring for PVC Rupees Thirty

30 10 nos insulated armoured cable complete with out going tails, 38.38 Eight And Paise Each

insulating tape etc for following size of cables. (C) 2 to 4 Thirty Eight Only

(D) 2 to 4 core 16 Sq. Mm Rupees Forty

10 nos 47.47 Each

Replacing old and u/s by Solder less crimping type

Aluminium lugs conforming to IS suitable for cable of

Rupees Thirteen

following size evenly crimped with high pressure tool &

31 32 nos 13.13 And Paise Each

connected to switchgear terminals with brass/cadmium

plated nut bolts in an approved manner. (B) 10 Sq.mm

(C) 16/25 Sq.mm. Rupees Fifteen

32 nos 15.15 And Paise Each

(D) 35/50 Sq.mm. Rupees Twenty

8 nos 20.20 And Paise Each

(E) 70 Sq.mm. Rupees Twenty

8 nos 25.25 Each

Disconnecting the cable connection and Providing straight

joint with PVC mould using heat shrink /cast resin type

epoxy compound Insulating material and making the joint

Thousand Eighty

complete using necessary in line connectors, hardener,

32 3 nos 1,083.73 Three And Paise Each

earth continuity connection, spacers etc. and reconnecting

the same & ensure the joint resistance within the limits as

per IS. (A) up to 25 Sq mm Cable

(C) 120 to 300 Sq. mm cable. Rupees Two

2 nos 2,654.28 Each

Replacing Old u/s by new Supplying & erecting IP

grade following size section pillar fabricated from joint less

M.S. Sheet with angle iron legs made from jointless M.S.

Angle with cable clamps to be buried in ground to have

appropriate erection to work uniform until erected with

cement concrete foundation and 45 cm high bricks work

finishing with plaster etc. hinged double door internally

supported on both side, Rupees Three

with internal and outside looking arrangement with look Thousand Five

33 1 nos and keys in duplicate 35 x 35 x 5 mm M.S. Angle of Two 3,595.60 Hundred Ninety Each

Nos. one is welded and other with nut and bolt for erecting Five And Paise

Bakelite sheet. Painting the Section Pillar inside and out Sixty Only

side with three tank powder coated paint. section pillar

roof should be without joint with water leakage proof &

tested as per IP 55 test & followed by IS 2147 of 1962 (B)

75 X 60 X 45 cm section pillar fabricated from 16 Gauge

MS Sheet with angle iron legs 45 cm long made from 35 X

35 X 5 mm thick MS angle.

Supplying and erecting HYLAM sheet on existing angle

iron frame.for following thickness (E) 10mm

34 0.7 Sq. Mtr. 1,927.08 Hundred Twenty Sq. Mtr.

Paise Eight Only

Replacing Old u/s by new Supplying & erecting approved

make SMC press moulded composite FRP. loop-in, loop-

out approx. 2mm thick box complete with Bakelite

connector strip 5way(3P+N+E),DIN rail for mounting mob Rupees Eight

& hinged doors as per requirement having locking Hundred Ninety

35 10 nos 898.90 Each

arrangements with mounting clamp with nuts, bolts & Eight And Paise

washers suitable for erection on pole with cable clamps& Ninety Only

earth bolt of following size of box.

(A) 300mm x 200mm x 100mm [deep]

Replacing Old u/s by new Supplying & erecting approved

make Digital time switch having lithium cell 6 years

operative and operate battery backup 1 channel day clock

with 14 memory programme, suitable to operate on 240V

+ 5%, 16A with, floating contacts Minimum switching

36 2 nos setup time 1 minimum & LCD display. Also comprised 3,168.37 Each

Eight And Paise

permanent ON/OFF switching. Programming switches &

housed in fire proof thermoplastic enclosure & transparent

cover erected as required with necessary connection

erected as directed.

Replacing Old u/s by new Supplying & erecting power

contactor ,AC3 duty for time switch complete erected as

per direction Cat III (D) 4 pole 440V 40 Amp.

37 2 nos 2,782.55 Hundred Eighty Each

Fifty Five Only

Supplying and erecting approved make panel mounting Rupees One

type Digital Voltmeter having 3 digits LED display, 0 to Thousand Two

750 AC Volts range erected on existing panel board with Hundred

38 4 nos 1,275.63 Each

all connection, wiring etc .with manufacturers calibration Seventy Five

certificate. And Paise Sixty

Supplying and erecting approved make panel mounting

type Digital Ammeter having 3 digits LED display,

external CT operated, calibrated for 0 to 1000 Amps

39 4 nos 1,558.43 Hundred Fifty Each

suitable to operate on 500 Volt AC , erected on existing

Eight And Paise

panel board with all connection, wiring etc .with

Forty Three Only

manufacturers calibration certificate.

Supplying and erecting Ammeter / Voltmeter selector Rupees Three

switch for 3 phase AC Supply 500 V on existing panel Hundred

40 8 nos board with necessary connections. 317.14 Seventeen And Each

Providing & erecting L.T. Current Transformer with bar Rupees Two

primary 50/5 to 1000/5 ratio 15 VA burden erected in Hundred

existing CRCA box duly secured with insulating materials Seventy Four

41 12 nos 274.72 Each

connected to the meter And Paise

Supplying and erecting approved make suitable panel

indicator LED type lamp, lens cover, complete erected

42 12 nos 43.43 Three And Paise Each

with necessary connections.

Forty Three Only

Replacing Old U/s Bu New Supplying & erecting approved

make 3 phase motor control cubical panel ( Star - Delta)

made from16 G. CRCA sheet duly painted with epoxy

powder painted inside and outside with hinged doors and

locking arrangement, consisting of suitable size of ON-

OFF isolator (AC - 3/23 duty) main fuses, single phasing

preventer cum water level. Guard (Complete unit), Toggle

switch to by pass Single phase preventer cum WLG,

indicating lamps for R- Y- B phases, over load relay,

Automatic water level controller, Ammeter & Voltmeter

43 6 nos 12,993.65 Hundred Ninety Each

each with two way selector switch incoming wires duly

Three And Paise

socket Crimped, Panel to be erected on angle iron frame

Sixty Five Only

grouted on wall as directed. Star Delta & main contactor,

overload relay, thermal / Electronic Star delta cutoff timer,

start - stop push buttons. The isolator overload relay &

contactors of L& T, Siemens or Cuttler Hamer make only.

Panel to be erected on angle iron frame ground on wall.

Replacing Old U/s Bu New Providing and erecting ISI Rupees One

marked PVC insulated PVC Sheathed Flat flexible Hundred Forty

44 360 mtrs 146.45 Mtr

Submersible copper cable approved make of following Six And Paise

Size. (C) 3 Core x 4 Sq. Mm Forty Five Only

Providing Water proof straight Joint in PVC insulated flat

flexible copper cable by using insulating material, water

45 6 nos proofing material, & making the joint complete. (A) Up to 189.88 Each

Eighty Eight Only

RUPEES IN WORDS : Rupees Nine Lakh(s) Fourteen Thousand Eight Hundred Ninety One And Paise Seven Only

I/We am/are willing to carry out the work at(No above rates allowed) ____________% below ___________________________________

__________________percent (Should be written in figures and words) below the tendered rates mentioned above.

Amount of my/our tender works out as under :

Put to Tender Rs. 914,891.07 Put to Tender Rs.

Deduct ______ % below Rs.

(Please strike out whichever is not applicable)

1 I/We hereby declare that I/We have visited the site, fully exquisite myself/ourselves with the local situation regarding materials and other factors

pertaining to the work before submitting this tender.

2 I/we hereby declare that I/We carefully studied the conditions of specifications and other tender documents of this work and agree to execute the

same accordingly.

3 A tender with any overwriting in percentage (should both in word and figures) rejected out right.

4 Insertions and/or corrections in the percentage quoted ( both in word and figures) resulting into increase in the value of the work shall be rejected

outright unless it is authenticated by the office opening the tender at the time of opening of tender.

5 Dismentaling the existing material taken by contractor as mention rates.

Deputy executive Engineer

Signature of Contractor C.P Electrical R & B Sub Dn

Less for the D.M

Name of work:-Renovation to Sump Panel & Compound Light at Govt. Engineering College, Sector-28,

Sr.no Item Qty. Per DM rate Total

1 Cost Of Old & u/s 3X1.5 Round Wire 50 Mtr. 3.96

2 Cost Of Old & u/s 36W St.light Fitting 4 Nos. 127.36

3 Cost Of Old & u/s 90W Floodlight Fitting 20 Nos. 281.00

4 Cost Of Old & u/s 63A Metal Clad Switch 5 Nos. 161.45

5 Cost Of Old & u/s 125A Metal Clad Switch 1 Nos. 287.75

6 Cost Of Old & u/s 200A Metal Clad Switch 1 Nos. 307.25

7 Cost Of Old & u/s MCB SP 10 Nos. 4.90

8 Cost Of Old & u/s MCB DP 5 Nos. 15.70

9 Cost Of Old & u/s MCB DP Enclosure 5 Nos. 8.10

10 Cost Of Old & u/s Cup Board 7.98 Sq. Mtr. 207.68

11 Cost Of Old & u/s 4x16 Sq.mm Al. Cable 40 Mtr. 6.90

12 Cost Of Old & u/s Gland & Lugs 1 Lot. 200.00

13 Cost Of Old & u/s Section Pillar 1 Nos. 220.35

14 Cost Of Old & u/s SMC Box 10 Nos. 54.54

15 Cost Of Old & u/s Timer 2 Nos. 123.76

16 Cost Of Old & u/s Contactor 2 Nos. 109.16

17 Cost Of Old & u/s Starter 6 Nos. 629.25

18 Cost Of Old & u/s 3x4 Sq.mm Flat Cable 50 Nos. 12.69

Dy.Executive Engineer Exe.Engineer

Sign of Contractor Cap.Proj. Elect.sub.Div-21 C.P.Electrical Division

Gandhinagar Gandhinagar