Kerala

Active

Works

Civil Works - Water Works

Annual Plan-VGP 2024-25-PR NO-528/25 mangalassery kattunaika colony DWSS motor installation and additional aminities in Ward CFC) RS- 250000-WELL RENOVATION General Civil Work

Local Self Government Department

Vellamunda GP | Wayanad, Kerala

Amount: ₹2.0 LCloses: 26 Oct 20265d left

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published19 Oct 2026
Closes26 Oct 2026
Bid Opening27 Oct 2026

Tender Value

₹2.0 L

EMD Value

₹4,974

Closing Date

26 Oct 2026, 12:15 pm5d left

Tender Inviting Organisation

Name

Assistant Engineer

Address

LID and EW Section Vellamunda GP Kattayad P O Wayanad 670731

Work Description

Annual Plan-VGP 2024-25-PR NO-528/25 mangalassery kattunaika colony DWSS motor installation and additional aminities in Ward CFC) RS- 250000-WELL RENOVATION General Civil Work

Tender Information

Tender ID

2026_LSGD_867174_16

Reference Number

VGP/2026-27/AE/LIDEW/PHASE1

Tender Type

Open Tender

Product Category

Civil Works - Water Works

Form of Contract

Item Rate

Period of Work

180 days

Location

Vellamunda GP

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

7 documents required · 7 mandatory

Fee/PreQual/Technical/Finance

RequiredScanned copy of Preliminary agreement (.pdf)

RequiredScanned copy of epayment form (.pdf)

RequiredScanned copy of Integrity pact certificate (.pdf)

RequiredNotice inviting Tender (.pdf)

RequiredScanned copy of affidavit (.pdf)

RequiredSBD downloaded from etender website (.pdf)

RequiredBill of Quantities (.xls)

Fee & Financial Details

Tender Fee Amount

₹555

Tender Fee Exemption Allowed

Yes

EMD Fee Amount

₹4,974

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

19 Oct 2026

Published

19 Oct 2026

Bid Opening

27 Oct 2026

Download Starts

19 Oct 2026

Download Ends

26 Oct 2026

Submission Starts

19 Oct 2026

Bill of Quantities

Item RateBoQ_Ver3.0INR

BoQ1 (16 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1PUMP HOUSE
1.001	2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil	0.95	cum	-	-
1.002	50.6.1.1:Solid block masonry using pre cast solid blocks ( factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part 1 of 1979 for foundation and plinth with thickness 20 cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete	0.95	cum	-	-
1.003	4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)	0.29	cum	-	-
1.004	4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns	0.84	sqm	-	-
1.005	50.6.1.2:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement: 6 coarse sand) etc complete.	0.64	cum	-	-
1.006	13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)	10.14	sqm	-	-
1.007	OD544823/2024-2025:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratchesduring transportation and should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses and including cutting tosize and shape wherever required.	5.62	sqm	-	-
1.008	10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes	17.15	kg	-	-
2PIPE LINE

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.04 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.05 MB

Tendernotice_2.pdf

PDF • 0.35 MB

Tendernotice_3.pdf

PDF • 0.08 MB

Tendernotice_4.pdf

PDF • 0.04 MB

Tendernotice_5.pdf

PDF • 0.03 MB

Work Item Documents

BOQ_1498804.xls

BOQ • 0.31 MB

s.pdf

Tender Documents • 1.74 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1PUMP HOUSE
1.001	2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil	0.95	cum	-	-
1.002	50.6.1.1:Solid block masonry using pre cast solid blocks ( factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part 1 of 1979 for foundation and plinth with thickness 20 cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete	0.95	cum	-	-
1.003	4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)	0.29	cum	-	-
1.004	4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns	0.84	sqm	-	-
1.005	50.6.1.2:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement: 6 coarse sand) etc complete.	0.64	cum	-	-
1.006	13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)	10.14	sqm	-	-
1.007	OD544823/2024-2025:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratchesduring transportation and should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses and including cutting tosize and shape wherever required.	5.62	sqm	-	-
1.008	10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes	17.15	kg	-	-
2PIPE LINE

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1PUMP HOUSE

1.001

2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

0.95

cum

1.002

50.6.1.1:Solid block masonry using pre cast solid blocks ( factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part 1 of 1979 for foundation and plinth with thickness 20 cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete

0.95

cum

1.003

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

0.29

cum

1.004

4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns

0.84

sqm

1.005

50.6.1.2:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement: 6 coarse sand) etc complete.

0.64

cum

1.006

13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

10.14

sqm

1.007

OD544823/2024-2025:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratchesduring transportation and should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses and including cutting tosize and shape wherever required.

5.62

sqm

1.008

10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

17.15

2PIPE LINE