Urgent maintenance works related to renting out old TE Building at Poojapura to Dept.of Post including internal and external painting(2nd call)

Amount

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).

First class country wood like Anjily/Plavu or imported wood like Violet/Pincoda

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including black enamelled M.S butt hinges with necessary screws excluding panelling while will be paid for seperately, all complete as per direction of Engineer-in-charge.

First class country wood like Anjily/Plavu or imported wood like Violet/Pincoda i)35 mm thick shutters

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick:

First class country wood like Anjily/Plavu or imported wood like Violet/Pincoda

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : a)250x16 mm

Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :a) 150x10 mm

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. A)Twin rubber stopper

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. A)40 mm thick with 20 mm nominal size stone aggregate

Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc.,., complete.

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade : a)Old work (one or more coats)

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade : a)One or more coats on old work.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : a)One or more coats on old work.

Finishing walls with Acrylic Smooth exterior paint of required shade :

Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface).

Old work (One or more coat applied @ 0.90 ltr/10 sqm).

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground , all complete as per directions of Engineer-In-Charge. a)With cement mortar 1:4 (1 cement : 4 fine sand).

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: a)Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm).

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge..a) In cement mortar

Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: a)Asbestos cement sheet

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :

For fixed portion i)Powder coated aluminium (minimum thickness of powder coating 50 micron) .

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). i) Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.

Pre-laminated particle board with decorative lamination on both sides.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):

With float glass panes of 4.0 mm thickness

Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.

Providing and fixing 6mm thick PVC ceiling with suitable aluminium 'L' angle of size 25 x 25mm all complete with necessary fixing arrangement and screws etc. complete.

Checking and attending minor repair work of wood/PVC and easening of door/window/cupboard shutter including taking out the shutter, refixing after necessary repairs including the cost of screws,beadings etc as directed by the Engineer-in-charge.

Checking and attending minor repair work of plumbing and minor repair taps around W/C, washbasin, sink etc including the cost of materials as directed by the Engineer-in-charge.

Clearing leakage/ blockage to drainage manholes/gully trap/floor trap including the cost of materials as directed by the Engineer-in-charge.

Checking and attending minor repairs to Aluminium windows/Insect screen frames including the cost of providing any fittings etc all complete as per direction of Engineer-in-charge

Dismantling 2mm thick ordinary Poly Vinyl chloride sheet in flooring and skirting including removal of adhesive etc, stacking all serviceable materials all complete and all as directed.

Repairs to MS gates by scrapping and sand papering and preparing the surface smooth for painting including necessary repairs to make the gate in smooth working condition etc all complete as directed by the Engineer-in-charge at site.(Painting including primer ,fittings if necessary will be paid as as extra)

Providing the service of skilled/unskilled labour for various jobs in connection with the urgent repairs & rectification works which are not measurable under any of the scheduled item.a)Coolie

Providing asbestos cement 6 mm thick corrugated sheets roofing and fixing with polymer coated J, or L hooks, bolts and nuts 8mm dia. G.I. plain and bitumen washers complete excluding the cost of purlins, rafters and trusses: corrugated sheets . A)Upto 60 degrees pitch

Providing and fixing ridges and hips in asbestos cement sheet roofing:a)One piece plain angular ridges