RENOVATION OF NAMASKARA MANDAPAM, CHUTTAMBALAM AT VERMANOOR SIVA TEMPLE, PALAKKAD

Amount

APPENDIX A-CHUTTAMBALAM

15.56 : Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

15.2.1 : Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

15.7.4 : Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar

15.13.2 : Taking out doors, windows and clerestory window shutters (steel or wood ) including stacking within 50 metres lead:Of area beyond 3 sq. metres

15.10.2 : Dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually / by mechanical means including stacking of serviceable and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge:In cement mortar

2.6.1 : Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

60.7.1 : DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site

5.9.5 : Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers

5.2.2 : Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

50.6.7.2 : Laterate masonry with neatly dressed laterate stone of size 40x20x15cm or nearest size in cement mortar 1:6 for super structure above plinth level up to floor two level including all cost of materials, labour charges etc.

15.14.1 : Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead:Of sectional area 40 square centimetres and above

15.31 : Dismantling tiled roofing with battens, boarding etc. complete including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.

50.9.13.1 : Supplying and fixing Anjily wood wrought and put up for roof members including cost and conveyance of materials etc. complete .

50.9.13.4 : Supplying and fixing Dept. wood wrought and put up for roof members including cost and conveyance of materials etc. complete.

12.48 : Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete (steel frame work to be paid separately)

od312/2024_2025 : Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete (steel frame work to be paid separately) using Departmental tiles

12.49 : Providing & laying on roof pressed clay tile ridge (Mangalore tile) of 20 mm thickness and of approved pattern on steel frame work complete (steel frame work to be paid separately ).

50.9.14.1 : Supplying and fixing Anjily wood reapers of size 50x25 mm with wire nails including cost and conveyance of materials etc. complete.

50.9.14.4 : Supplying and fixing Dept. wood reapers of size 50x25 mm with wire nails including cost and conveyance of materials etc . complete.

50.9.1.1 : Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), using good quality Anjili wood /jack wood

50.9.2.1 : Providing and fixing paneled and glazed shutters for doors, windows and clerestory windows, 35 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineerin - charge. using Anjili/ Jack wood

12.5.1 : Providing valleys of 90 cm wide overall in plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limper and bitumen washers complete:1.60 mm thick with zinc coating not less than 350 gm/ m2

9.48.2 : Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden frames with rawl plugs screws etc

4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

11.41.2 : Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.

13.97.1 : Painting with oil type wood preservative of approved brand and manufacture:Old work (one or more coats)

13.57.1 : Painting with oil type wood preservative of approved brand and manufacture :New work (two or more coats)

od16897/2024_2025 : Polishing the doors with PU wood clear two coat over the sealer & Thinner two coat finishing and smoothening with sand paper etc. complete.

od317/2024_2025 : Floor painting with floor enamel paint of approved brand and manufacture of required colour to give an even shade:<br> old work

od14797/2024_2025 : Supplying ans fixing 72 height "sopanam" including the granite steps and sides with all ornamental works etc complete with ornamental works including cost of all materials and labour charges etc complete

od318/2024_2025 : vedhika with laterite masonry of thickness upto 30 cm and width up to 45 cm

od319/2024_2025 : padukam with laterite masonry in cement mortar 1:4 with thickness upto 40 cm with ornamental finish

od320/2024_2025 : gagathi and galam with laterite masonry in cement mortar 1:4 with thickness upto 36 cm and width upto 45 cm

od321/2024_2025 : Supplying and fixing thazhikakkudam of 72 cm height and bottom diameter up to 24 cm using 22 gauge copper with ornamental works as per the drawing

od322/2024_2025 : supplying and fixing 200 mm brass tower bolt best quality

od323/2024_2025 : supplying and fixing ancient type lock brass best quality

od324/2024_2025 : supplying and fixing 300 mm brass clamp best quality

od325/2024_2025 : supplying and fixing door handle 150 mm brass best quality

od326/2024_2025 : supplying and fixing butt hinges 150 mm brass best quality

od327/2024_2025 : supplying and fixing 65 mm or nearest size 7 lever best quality pad lock

od328/2024_2025 : supplying and fixing brass mottu for doors best quality

od329/2024_2025 : supplying and fixing brass flat beeding 5 cm or nearest sixe wide with ornamental works to door shutters best quality

od14882/2024_2025 : Painting with antifungal/weather proof tile coat paint of best quality two coat over the tile roof after cleaning the surface

13.61.1 : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

13.60.1 : Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

13.98.1 : Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work

APPENDIX B-NAMASKARA MANDAPAM

15.31 : Dismantling tiled roofing with battens, boarding etc. complete including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.

15.14.1 : Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead:Of sectional area 40 square centimetres and above

15.10.2 : Dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually / by mechanical means including stacking of serviceable and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge:In cement mortar

2.6.1 : Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

60.7.1 : DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site

5.1.2 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size

5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

od14217/2024_2025 : Supplying and fixing granite for basement with average width of 30cm with smooth finish, Vedika with height 19.5cm with cuttings.

od14238/2024_2025 : Supplying and fixing granite for basement with average width of 30cm with smooth finish, Padi with height upto 3.75cm

od14243/2024_2025 : Supplying and fixing granite for basement with average width of 30cm with smooth finish,Kumudam with height upto 26.25cm

od14244/2024_2025 : Supplying and fixing granite for basement with average width of 30cm with smooth finish, jagathi with height upto 30cm

od14245/2024_2025 : Supplying and fixing granite for basement with average width of 30cm with smooth finish, padukam with height upto 11.25cm

od321/2024_2025 : Supplying and fixing thazhikakkudam of 72 cm height and bottom diameter up to 24 cm using 22 gauge copper with ornamental works as per the drawing

50.9.1.1 : Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), using good quality Anjili wood /jack wood

od565/2024_2025 : Roofing with copper sheet (mine copper) by preparation of copper sheet tiles 22 guage copper sheet including cutting the sheet with singles, fixing the copper sheet by nailing the wooden roof with copper nails and washers including labour charges for cutting strips, placing in position bending and folding each sheet so as to accomodate the next also nailing so that no nail is visible from outside.

od16880/2024_2025 : Painting with metal paint (clear) MRF/equivalent on copper sheet roofing Finished granite surface. <br>New work (Two or more coat on New work)

11.55.1 : Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid an jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge :Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

od13754/2024_2025 : Providing Granite stone Pillar of Bottom 22.50cm, Top 20cm, 1.92m including ornamental design with engraving work, carving , Grooving all necessary work with material & Labour charge etc. inluding Peedom & Pothika. (For One Pillar)

13.57.1 : Painting with oil type wood preservative of approved brand and manufacture :New work (two or more coats)

od316/2024_2025 : polishing with lacquer polish neatly after cleaning the surface smoothly including all materials and labour charges etc complete

APPENDIX-C NALAMBALAM

od16836/2024_2025 : Laying of granite stone floor using new granite stone of 15cm thick with palmuna finished top over a bed of coarse sand of 15cm thick pointing with cement mortar 1:3 and joints filled with cement grout etc. complete.

13.7.1 : 12 mm cement plaster finished with a floating coat of neat cement of mix:1:3 ( 1 cement : 3 fine sand)

od15202/2024_2025 : Drilling/Core Cutting of required dia outlets using low vibration mechanical means. Cost to include closing of core cut using appropriate sealant with necessary form work, staging, tools, etc., ( if required)

50.10.2 : Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

10.2 : Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

od15203/2024_2025 : Providing G.I Net thickness 5mm or nearest available size of approved quality as per the direction of Engineer in charge.

4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

4.1.3 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

13.61.1 : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

RAGHUNATH O (BID ID -1973727)

STANY EDAPPALA SUNDARAN (BID ID -1973307)

Nijesh (BID ID -1973424)

Bidder Name

Nijesh

RAGHUNATH O

SETHUMADHAVAN K P

STANY EDAPPALA SUNDARAN